• There are no items in your cart

EN 1677-4:2000+A1:2008

Current
Current

The latest, up-to-date edition.

Components for slings - Safety - Part 4: Links, Grade 8
Published date

11-12-2008

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Hazards
5 Safety requirements
  5.1 Design
  5.2 Dimensions
  5.3 Materials and heat treatment
  5.4 Manufacturing methods and workmanship
  5.5 Mechanical properties
6 Verification of safety requirements
  6.1 Qualification of personnel
  6.2 Type tests and examination
  6.3 Manufacturing examination
  6.4 Manufacturing tests
  6.5 Manufacturing test regime (forged links)
  6.6 Manufacturing test regime (welded links)
7 Marking
  7.1 Links
  7.2 Load bearing pins
8 Manufacturer's certificate
9 Instructions for use
Annex ZA (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 98/37/EC
Annex ZB (informative) Relationship between this European
         Standard and the Essential Requirements of EU
         Directive 2006/42/EC

This part of EN 1677 specifies requirements for forged or welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 8 up to 132 t WLL, mainly for use in:-chain slings according to EN 818-4-steel wire rope slings-textile slings according to EN 1492-1:2000, EN 1492-2:2000.intended for lifting objects, materials or goods.This Part of EN 1677 does not apply to hand forged links.The hazards covered by this Part of EN 1677 are identified in clause 4.Annex ZA gives the relationship with EU-Directives.

Committee
CEN/TC 168
DevelopmentNote
2000 Edition Re-Issued in November 2008 & incorporates AMD 1 2008. (01/2009)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

DIN EN 13071-3:2011-12 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
BS EN 13414-2 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 1492-4 : 2004 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
I.S. EN 13414-2:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
DIN EN 13414-2:2009-02 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
DIN EN 13414-1:2009-02 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
EN 12195-4:2003 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
EN 12195-3:2001 Load restraint assemblies on road vehicles - Safety - Part 3: Lashing chains
EN 13414-1:2003+A2:2008 Steel wire rope slings - Safety - Part 1: Slings for general lifting service
PREN 13155 : DRAFT 2017 CRANES - NON-FIXED LOAD LIFTING ATTACHMENTS
EN 12079-2 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
NF EN 13071-3 : 2011 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
DIN EN 1492-4:2009-02 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
DIN EN 12195-4:2004-04 Load restraint assemblies on road vehicles - Safety - Part 4: Lashing steel wire ropes
BS EN 13414-1 : 2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
I.S. EN 13414-1:2003 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
I.S. EN 818-6:2000 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
I.S. EN 1492-4:2004 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
I.S. EN 818-4:1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
VDI 2700 Blatt 19:2011-01 Securing of loads on road vehicles - Rolled steel strip, sheets, and section steel
ISO 10855-2:2018 Offshore containers and associated lifting sets Part 2: Design, manufacture and marking of lifting sets
UNE-EN 13071-3:2012 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
I.S. EN 13071-3:2011 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
UNI EN 13071-3 : 2011 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
BS EN 12195-3:2001 Load restraint assemblies on road vehicles. Safety Lashing chains
BS EN 12079-2:2006 Offshore containers and associated lifting sets Lifting sets. Design, manufacture and marking
UNI EN 818-4 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
UNI EN 13414-2 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN 818-6 : 2008 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
UNI EN 13414-1 : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
UNI EN 1492-4 : 2009 TEXTILE SLINGS - SAFETY - PART 4: LIFTING SLINGS FOR GENERAL SERVICE MADE FROM NATURAL AND MAN-MADE FIBRE ROPES
API 2CCU : 2017 OFFSHORE CARGO CARRYING UNITS
I.S. EN 12079-2:2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
15/30331863 DC : 0 BS EN ISO 10855-2 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
10/30212165 DC : 0 BS EN 13071-3 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 3: RECOMMENDED LIFTING CONNECTIONS
DIN EN 818-6:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 818-4 : 1997 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8
BS EN 12195-4:2003 Load restraint assemblies on road vehicles. Safety Lashing steel wire ropes
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
EN 1492-4:2004+A1:2008 Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes
EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
BS EN 13071-3:2011 Stationary waste containers up to 5000 l, top lifted and bottom emptied Recommended lifting connections
17/30360261 DC : 0 BS EN 13135 - CRANE - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS
GOST R EN 818-4 : 2005 SHORT LINK CHAINS FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS GRADE 8
DIN EN 13414-1 E : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 1: SLINGS FOR GENERAL LIFTING SERVICE
DIN EN 13414-2 E : 2009 STEEL WIRE ROPE SLINGS - SAFETY - PART 2: SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
BS EN 818-6 : 2000 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 6: CHAIN SLINGS - SPECIFICATION FOR INFORMATION FOR USE AND MAINTENANCE TO BE PROVIDED BY THE MANUFACTURER
EN 13071-3:2011 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections
EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer
DIN EN 818-4:2008-12 SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 4: CHAIN SLINGS - GRADE 8

EN 10002-2 : 1991 METALLIC MATERIALS - TENSILE TESTING - PART 2: VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINE
EN 10228-2:2016 Non-destructive testing of steel forgings - Part 2: Penetrant testing
EN 10025:1990/A1:1993 HOT ROLLED PRODUCTS OF NON-ALLOY STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
EN ISO 9002:1994/AC:1997 QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
EN 1050 : 1996 SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT
EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
EN 10228-1:1999 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
EN 1492-2:2000+A1:2008 Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use
ISO 643:2012 Steels Micrographic determination of the apparent grain size
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
EN 1492-1:2000+A1:2008 Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use
EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
EN 45012 : 1998 GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.