• There are no items in your cart

EN 1706:2010

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
Superseded date

05-02-2020

Published date

03-10-2010

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Ordering information
5 Designation systems
6 Chemical composition
7 Mechanical properties
8 Rounding rules for determination of compliance
Annex A (informative) - Mechanical properties of pressure die
        cast alloys
Annex B (informative) - Comparison of casting characteristics,
        mechanical and other properties
Annex C (informative) - Comparison between cast aluminium
        alloy designations
Bibliography

This European Standard specifies the chemical composition limits for aluminium casting alloys and mechanical properties of separately cast test pieces for these alloys.Annex B is included as a guide to the selection of alloys for a specific use or process.This European Standard is intended to be used in conjunction with EN 576, EN 1559-1, EN 1559-4, EN 1676 and EN ISO 8062-3.

Committee
CEN/TC 132
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

Standards Relationship
DIN EN 1706:2013-12 Identical
PN EN 1706 : 2011 Identical
UNE-EN 1706:2011 Identical
UNI EN 1706 : 2010 Identical
NEN EN 1706 : 2010 Identical
NS EN 1706 : 2010 Identical
NBN EN 1706 : 2010 Identical
NF EN 1706 : 2010 Identical
I.S. EN 1706:2010 Identical
SANS 51706 : 1998 AMD 1 2007 Identical
SN EN 1706 : 2010 Identical
BS EN 1706:2010 Identical
ONORM EN 1706 : 2013 Identical
DIN EN 1706:2019-03 (Draft) Identical

DIN EN 15646 E : 2009 ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
UNE-EN 13195:2014 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
DIN EN 124-3:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
UNI EN ISO 4521 : 2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
DD CLC/TS 50537-2:2010 Railway applications. Mounted parts of the traction transformer and cooling system Pump for insulating liquid for traction transformers and reactors
BS EN 12693:2008 Refrigerating systems and heat pumps. Safety and environmental requirements. Positive displacement refrigerant compressors
UNI EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
13/30286636 DC : 0 BS EN 1559-4 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS
10/30234610 DC : DRAFT NOV 2010 BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
14/30301152 DC : 0 BS EN 12392 - ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
BS EN ISO 27874:2008 Metallic coatings. Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes. Specification and test methods
I.S. EN 15646:2009 ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
10/30234616 DC : 0 BS EN 14420-7 - HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
DIN EN 13195:2013-12 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
10/30234619 DC : 0 BS EN 14420-2 - HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
PREN 12392 : DRAFT 2014 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
DIN EN 124-3 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
UNE-EN 15646:2010 Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods
I.S. ENV 1999-2:1998 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 2: STRUCTURES SUSCEPTIBLE TO FATIGUE
I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
CEI CLC/TS 50537-2 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
UNI EN 912 : 2011 TIMBER FASTENERS - SPECIFICATIONS FOR CONNECTORS FOR TIMBER
I.S. EN ISO 27874:2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
UNE-EN ISO 2081:2010 Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2008)
BS EN ISO 2081:2018 Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel
17/30244737 DC : 0 BS EN 17149 - RAILWAY APPLICATIONS - FATIGUE STRENGTH ASSESSMENT OF RAILWAY VEHICLE STRUCTURES BASED ON CUMULATIVE DAMAGE
ONORM EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN EN ISO 2081:2016-04 (Draft) METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
DIN EN 1676:2010-06 ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS
BS EN 912:2011 Timber fasteners. Specifications for connectors for timbers
BS EN 1676:2010 Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
BS EN 14420-3:2013 Hose fittings with clamp units Clamp units, bolted or pinned
BS EN 14420-7:2013 Hose fittings with clamp units Cam locking couplings
I.S. EN 912:2011 TIMBER FASTENERS - SPECIFICATIONS FOR CONNECTORS FOR TIMBERS
EN 50052:2016 High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures
EN 12487:2007/AC:2008 CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
EN 13195:2013 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
CEN/TR 17144:2017 Resistance of metallic materials to liquid biogenic and alternative fuels and their blends
EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
UNE-EN 1676:2011 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
I.S. EN 12284:2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
EN 12693:2008 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
EN 13195-1 : 2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
EN 12392:2016 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 13195-1:2002-11 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE) - PART 1: SPECIFICATIONS
DIN EN ISO 4527:2003-10 METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS
17/30364387 DC : 0 BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
UNI EN 13195 : 2013 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
03/317246 DC : 0 ISO 2081 - METALLIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
10/30234631 DC : 0 BS EN 14420-8 - HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
10/30234613 DC : DRAFT NOV 2010 BS EN 14420-4 - HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
EN ISO 2081:2018 Metallic and other inorganic coatings - Electroplated coatings of zinc with supplementary treatments on iron or steel (ISO 2081:2018)
CLC/TS 50537-2:2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors
PREN 1559-4 : DRAFT 2013 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS
BS EN 50052:2016 High-voltage switchgear and controlgear. Gas-filled cast aluminium alloy enclosures
CLC/TS 50537-3:2010 Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters
04/30050372 DC : DRAFT JUN 2004 EN 13981-3 - ALUMINIUM AND ALUMINIUM ALLOYS - PRODUCTS FOR STRUCTURAL RAILWAY APPLICATIONS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY - PART 3: CASTINGS
07/30161646 DC : 0 BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
BS EN ISO 4521:2008 Metallic and other inorganic coatings. Electrodeposited silver and silver alloy coatings for engineering purposes. Specification and test methods
07/30167467 DC : 0 BS EN ISO 27874 - METALLIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
I.S. EN ISO 2081:2018 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL (ISO 2081:2018)
PREN 4632-002 : 200P1 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
BS EN 1999-1-1 : 2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
I.S. EN 1999-1-1:2007 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES (INCLUDING IRISH NATIONAL ANNEX)
BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
ISO/TR 17671-4:2002 Welding Recommendations for welding of metallic materials Part 4: Arc welding of aluminium and aluminium alloys
17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
UNE-EN ISO 4521:2010 Metallic and other inorganic coatings - Electrodeposited silver and silver alloy coatings for engineering purposes - Specification and test methods (ISO 4521:2008)
NF EN 4632-002 : 2008 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
S.R. CEN/TR 16748:2014 ALUMINIUM AND ALUMINIUM ALLOYS - MECHANICAL POTENTIAL OF AL-SI ALLOYS FOR HIGH PRESSURE, LOW PRESSURE AND GRAVITY DIE CASTING
I.S. EN 50052:2016 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED CAST ALUMINIUM ALLOY ENCLOSURES
DIN EN 12284:2004-01 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
DIN EN 12487:2007-07 Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
DIN EN 1559-4:2015-05 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS
DIN EN 13981-3:2006-12 Aluminium and aluminium alloys - Products for structural railway applications, Technical conditions for inspection and delivery - Part 3: Castings
DIN EN 15088 E : 2006 ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
BS EN ISO 4527:2003 Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods
BS EN 1462:2004 Brackets for eaves gutters. Requirements and testing
I.S. EN 1462:2004 BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING
I.S. EN 14420-8:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
DIN EN 14420-8:2016-06 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
DIN EN 14420-3:2013-09 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
I.S. EN 1559-4:2015 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 4: ADDITIONAL REQUIREMENTS FOR ALUMINIUM ALLOY CASTINGS
UNE-EN 1676:2011 ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS
DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
I.S. EN 14420-2:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
DIN EN 14420-7:2013-09 Hose fittings with clamp units - Part 7: Cam locking couplings
S.R. CEN/TR 17144:2017 RESISTANCE OF METALLIC MATERIALS TO LIQUID BIOGENIC AND ALTERNATIVE FUELS AND THEIR BLENDS
I.S. EN 12487:2007 CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
I.S. EN 13195-1:2002 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT AND CAST PRODU- PART 1: SPECIFICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
I.S. EN 12392:2016 ALUMINIUM AND ALUMINIUM ALLOYS - WROUGHT PRODUCTS AND CAST PRODUCTS - SPECIAL REQUIREMENTS FOR PRODUCTS INTENDED FOR THE PRODUCTION OF PRESSURE EQUIPMENT
DIN EN ISO 27874:2009-01 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
I.S. EN 14420-3:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
DIN EN 14420-2:2013-09 Hose fittings with clamp units - Part 2: Hose side parts of hose tail
DIN EN 14420-4:2013-09 Hose fittings with clamp units - Part 4: Flange connections
I.S. EN 14420-4:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
I.S. EN 14420-7:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
SBAC TS 260 : 5 METALLIC MATERIALS - LIST OF ALTERNATIVE MATERIAL SPECIFICATIONS & STANDARDS ONLY AUTHORISED FOR USE ON ADS STANDARD PARTS
ASME PV CODE 2B : 2017 BOILER AND PRESSURE VESSEL CODE - MATERIALS - NONFERROUS MATERIAL SPECIFICATIONS
CEI CLC/TS 50537-3 : 2011 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
DIN EN 1999-1-1:2014-03 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
05/30133060 DC : 0 EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
UNI EN 12693 : 2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
PD CEN/TR 16748:2014 Aluminium and aluminium alloys. Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting
BS EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel or aluminium alloys
12/30265304 DC : 0 BS EN 124-3 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL OR ALUMINIUM ALLOY
PREN 50069 : DRAFT 2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
CEN ISO/TR 20172:2009 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
10/30234607 DC : 0 BS EN 14422 - CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
BS EN 15646:2009 Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods
UNI EN 15646 : 2009 ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
PD CEN ISO/TR 20172:2009 Welding. Grouping systems for materials. European materials
ISO 2081:2018 Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel
I.S. EN ISO 4521:2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
PREN 14420-4 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
S.R. CEN ISO TR 20172:2009 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
CEN/TR 16748:2014 Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting
S.R. CLC/TS 50537-2:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 2: PUMP FOR INSULATING LIQUID FOR TRACTION TRANSFORMERS AND REACTORS
EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
DIN EN 12392:2016-08 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
DIN EN 1462:2004-12 Brackets for eaves gutters - Requirements and testing
BS EN 13195-1:2002 Aluminium and aluminium alloys. Wrought and cast products for marine applications (shipbuilding, marine and offshore) Specifications
ISO 4526:2004 Metallic coatings Electroplated coatings of nickel for engineering purposes
BS EN 601:2004 Aluminum and aluminium alloys. Castings. Chemical composition of castings for use in contact with foodstuff
UNE-EN 14420-7:2014 Hose fittings with clamp units - Part 7: Cam locking couplings
BS EN 40-6:2002 Lighting columns Requirements for aluminium lighting columns
UNI EN 1676 : 2010 ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS
EN ISO 4521 : 2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
EN 1999-1-1:2007/A2:2013 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
UNI EN 14420-2 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
EN 1011-4:2000/A1:2003 WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS
EN ISO 27874:2008 Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008)
UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
UNI EN 14420-7 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
UNI EN 14420-3 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
UNI EN 14420-4 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS
DIN 390:2002-04 Hand-wheels, dished - Hub hole with straight square
PREN 14420-2 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 2: HOSE SIDE PARTS OF HOSE TAIL
16/30329239 DC : 0 BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
UNI EN 1999-1-1 : 2014 EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL STRUCTURAL RULES
12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
DD ENV 1999-2:2000 Eurocode 9. Design of aluminium structures Structures susceptible to fatigue
PREN 14420-7 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 7: CAM LOCKING COUPLINGS
BS EN 4632-002:2008 Aerospace series. Welded and brazed assemblies for aerospace constructions. Weldability and brazeability of materials Homogeneous assemblies aluminium and aluminium alloys
UNE-EN 50052:2017 High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures
DIN 3220:2002-04 Hand-wheels, flat type - Hub hole with tapered square
BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 12693:2016-10 (Draft) REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
I.S. EN 12693:2008 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
EN 12480:2018 Gas meters - Rotary displacement gas meters
I.S. EN 13195:2013 ALUMINIUM AND ALUMINIUM ALLOYS - SPECIFICATIONS FOR WROUGHT AND CAST PRODUCTS FOR MARINE APPLICATIONS (SHIPBUILDING, MARINE AND OFFSHORE)
I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
DIN EN 601:2004-07 Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff
DIN EN 912:2011-09 Timber fasteners - Specifications for connectors for timbers
BS EN 12392:2016 Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
BS EN 12487:2007 Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
BS EN ISO 4526:2004 Metallic coatings. Electroplated coatings of nickel for engineering purposes
ISO 4521:2008 Metallic and other inorganic coatings — Electrodeposited silver and silver alloy coatings for engineering purposes — Specification and test methods
BS EN 14420-2:2013 Hose fittings with clamp units Hose side parts of hose tail
EN 1676:2010 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
BS EN 1780-2:2002 Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings Chemical symbol based designation system
BS EN 13920-12:2003 Aluminium and aluminium alloys. Scrap Turnings consisting of one single alloy
DIN EN 15088:2016-09 (Draft) Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German and English version prEN 15088:2016
BS EN 1780-3:2002 Aluminium and aluminium alloys. Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings Writing rules for chemical composition
BS EN 15088:2005 Aluminium and aluminium alloys. Structural products for construction works. Technical conditions for inspection and delivery
BS EN 14420-4:2013 Hose fittings with clamp units Flange connections
UNE-EN 12392:2017 Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
I.S. EN 1676:2010 ALUMINIUM AND ALUMINIUM ALLOYS - ALLOYED INGOTS FOR REMELTING - SPECIFICATIONS
BS EN 13981-3:2006 Aluminium and aluminium alloys. Products for structural railway applications. Technical conditions for inspection and delivery Castings
UNE-EN 14420-3:2014 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
EN 13920-12:2003 Aluminium and aluminium alloys - Scrap - Part 12: Turnings consisting of one single alloy
EN 601:2004 Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff
EN 1780-3:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition
EN 14420-2:2013 Hose fittings with clamp units - Part 2: Hose side parts of hose tail
EN 1462:2004 Brackets for eaves gutters - Requirements and testing
EN 15088:2005 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery
EN 13981-3:2006 Aluminium and aluminium alloys - Products for structural railway applications - Technical conditions for inspection and delivery - Part 3: Castings
EN ISO 4526 : 2004 METALLIC COATINGS - ELECTROPLATED COATINGS OF NICKEL FOR ENGINEERING PURPOSES
EN 1780-2:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system
EN 14420-4:2013 Hose fittings with clamp units - Part 4: Flange connections
EN 4632-002:2008 Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys
EN 14420-7:2013 Hose fittings with clamp units - Part 7: Cam locking couplings
EN 40-6:2002 Lighting columns - Part 6: Requirements for aluminium lighting columns
EN 15646:2009 Electrodeposited coatings - Electroplated coatings of aluminium and aluminium alloys with supplementary treatment - Requirements and test methods
EN 1559-4:2015 Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
EN 912:2011 Timber fasteners - Specifications for connectors for timbers
EN 14420-8:2013+A1:2016 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)
EN ISO 4527 : 2003 METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS - SPECIFICATION AND TEST METHODS (ISO 4527:2003)
EN 14420-3:2013 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
UNI EN ISO 27874 : 2008 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
PREN 14420-3 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
BS EN 13195:2013 Aluminium and aluminium alloys. Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore)
PREN 14422 : DRAFT 2010 CLAMP TYPE COUPLING ASSEMBLIES FOR LPG TRANSFER HOSES
DD CLC/TS 50537-3:2010 Railway applications. Mounted parts of the traction transformer and cooling system Water pump for traction converters
S.R. CEN ISO/TR 20172:2021 Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
PD CEN/TR 17144:2017 Resistance of metallic materials to liquid biogenic and alternative fuels and their blends
DIN 3319:2002-04 Hand-wheels, dished - Hub hole with tapered square
UNE-EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
BS ISO 4526 : 2004 AMD 15798 METALLIC COATINGS - ELECTROPLATED COATINGS OF NICKEL FOR ENGINEERING PURPOSES
04/30125694 DC : DRAFT NOV 2004 EN 15088 - ALUMINIUM AND ALUMINIUM ALLOYS - STRUCTURAL PRODUCTS FOR CONSTRUCTION WORKS - TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY
PREN 14420-8 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
17/30360728 DC : DRAFT MAY 2017 BS EN ISO 2081 - METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
I.S. CEN ISO TR 20172:2006 WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
I.S. EN 124-3:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
UNI EN ISO 2081 : 2009 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
UNE-EN 1090-3:2011 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
UNE-EN ISO 27874:2010 Metallic and other inorganic coatings - Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes - Specification and test methods (ISO 27874:2008)
EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
S.R. CLC/TS 50537-3:2010 RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 3: WATER PUMP FOR TRACTION CONVERTERS
I.S. EN 4632-002:2008 AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 002: HOMOGENEOUS ASSEMBLIES ALUMINIUM AND ALUMINIUM ALLOYS
DIN EN 1780-3:2003-01 ALUMINIUM AND ALUMINIUM ALLOYS - DESIGNATION OF ALLOYED ALUMINIUM INGOTS FOR REMELTING, MASTER ALLOYS AND CASTINGS - PART 3: WRITING RULES FOR CHEMICAL COMPOSITION
UNE-EN 912:2011 Timber fasteners - Specifications for connectors for timbers
BS EN 1559-4:2015 Founding. Technical conditions of delivery Additional requirements for aluminium alloy castings
BS EN 14420-8 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 8: SYMMETRICAL HALF COUPLING (GUILLEMIN SYSTEM)
ISO 27874:2008 Metallic and other inorganic coatings — Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes — Specification and test methods
ISO 4527:2003 Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods
BS EN 1011-4:2000 Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys
ISO/TR 20172:2009 Welding Grouping systems for materials European materials
DIN EN 12693:2008-09 REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS
DIN EN ISO 2081:2009-05 METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL
EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
DIN EN ISO 4526:2004-09 Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004); German version EN ISO 4526:2004
I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
DIN EN 15088:2006-03 Aluminium and aluminium alloys - Structural products for construction works - Technical conditions for inspection and delivery; German version EN 15088:2005
DIN EN ISO 4521:2009-01 METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED SILVER AND SILVER ALLOY COATINGS FOR ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS
DIN EN 13920-12:2003-08 ALUMINIUM AND ALUMINIUM ALLOYS - SCRAP - PART 12: TURNINGS CONSISTING OF ONE SINGLE ALLOY
DIN EN 15646:2009-07 ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
UNE-EN 14420-8:2014 Hose fittings with clamp units - Part 8: Symmetrical half coupling (Guillemin system)

EN 1780-1:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system
EN 10002-1 : 2001 METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE
EN 1780-3:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition
EN ISO 8062-3 : 2007 COR 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
EN 1676:2010 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
EN 1780-2:2002 Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system
EN 601:2004 Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff
ISO 8062-3:2007 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
EN 12258-1:2012 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN 576:2003 Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications
EN 1559-4:2015 Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.