• There are no items in your cart

EN 1863-2:2004

Current
Current

The latest, up-to-date edition.

Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard
Published date

10-06-2004

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
  4.1 Product description
  4.2 Conformity with the definition of heat strengthened soda
      lime silicate glass
  4.3 Determination of the characteristic's performances
      4.3.1 Characteristics of heat strengthened soda lime
            silicate glass
      4.3.2 Determination of characteristics of heat strengthened
            soda lime silicate glass products
  4.4 Durability
  4.5 Dangerous substances
5 Evaluation of conformity
  5.1 General
  5.2 Initial type testing of the product
      5.2.1 General
      5.2.2 Initial type testing of heat strengthened soda lime
            silicate glass
      5.2.3 Initial type testing of characteristic's performances
  5.3 Factory production control and inspection of samples in
      accordance with a prescribed test plan
  5.4 Initial inspection of factory and of factory production control
  5.5 Continuous surveillance and assessment of the factory production
      control
6 Marking and/or labelling
  6.1 General
  6.2 Product marking
  6.3 Product characteristics
  6.4 "Characteristics/performance identification paper"
Annex A (normative) Factory production control
      A.1 Factory Production Control Requirements
          A.1.1 General
          A.1.2 Organisation
          A.1.3 Control system
      A.2 Marking
      A.3 Inspection and testing tables of heat strengthened soda
          lime silicate glass production
          A.3.1 Information on Table A.1
          A.3.2 Use of proxy testing
Annex B (informative) Tests for factory production control
      B.1 Strength measurement
          B.1.1 Four point bending strength test
          B.1.2 Optical surface pre-stress measurement
      B.2 Fragmentation test
          B.2.1 Requirements
          B.2.2 Test method
Annex C (informative) Provisions for voluntary involvement of
        third party(ies)
Annex ZA (informative) Clauses of this European Standard addressing
         the provisions of EU Construction Products Directive
Bibliography

This document covers the evaluation of conformity and the factory production control of flat heat strengthened soda lime silicate glass for use in buildings. Note: For glass products with electrical wiring or connections for, e.g. alarm or heating purposes, other directives, e.g. Low Voltage Directive, may apply.

Committee
CEN/TC 129
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

Standards Relationship
NF EN 1863-2 : 2005 Identical
I.S. EN 1863-2:2004 Identical
NS EN 1863-2 : 1ED 2005 Identical
DIN EN 1863-2:2005-01 Identical
BS EN 1863-2:2004 Identical
UNE-EN 1863-2:2005 Identical
PN EN 1863-2 : 2008 Identical
NEN EN 1863-2 : 2004 Identical
NBN EN 1863-2 : 2005 Identical
SN EN 1863-2 : 2004 Identical
UNI EN 1863-2 : 2005 Identical

PREN 15254-4 : DRAFT 2016 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
DIN EN 15254-4:2013-10 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
DIN EN 13022-2:2014-08 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES
UNE-EN 13022-2:2015 Glass in building - Structural sealant glazing - Part 2: Assembly rules
EN 13022-2:2014 Glass in building - Structural sealant glazing - Part 2: Assembly rules
DIN EN 15254-4 E : 2013 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
EN 15254-4:2008+A1:2011 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
BS EN 16361 : 2013 POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION
I.S. EN 16361:2013 POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION
PREN 14449 : DRAFT 2017 GLASS IN BUILDING - LAMINATED GLASS AND LAMINATED SAFETY GLASS - PRODUCT STANDARD
I.S. EN 14351-1:2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS WITHOUT RESISTANCE TO FIRE AND/OR SMOKE LEAKAGE CHARACTERISTICS
I.S. EN 13022-2:2014 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES
I.S. EN 14600:2005 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
05/30134012 DC : 0 EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTION
11/30253413 DC : 0 BS EN 16361 - POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOOR SETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS
12/30266506 DC : 0 BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS
BS EN 14600:2005 Doorsets and openable windows with fire resisting and/ or smoke control characteristics. Requirements and classification
UNI EN 14600 : 2006 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
UNI EN 13022-2 : 2014 GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: ASSEMBLY RULES
PREN 50583 : DRAFT 2012 PHOTOVOLTAICS IN BUILDINGS
BS EN 14351-1 : 2006 WINDOWS AND DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PART 1: WINDOWS AND EXTERNAL PEDESTRIAN DOORSETS
EN 14351-1:2006+A2:2016 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets
EN 14600:2005 Doorsets and openable windows with fire resisting and/or smoke control characteristics - Requirements and classification
EN 16361:2013+A1:2016 Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation
16/30347433 DC : 0 BS EN 15254-4 - EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
UNE-EN 50583-1:2016 Photovoltaics in buildings - Part 1: BIPV modules
BS EN 50583-1:2016 Photovoltaics in buildings BIPV modules
08/30172148 DC : DRAFT MAY 2008 BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING
I.S. EN 50583-1:2016 PHOTOVOLTAICS IN BUILDINGS - PART 1: BIPV MODULES
UNI EN 16361 : 2013 POWER OPERATED PEDESTRIAN DOORS - PRODUCT STANDARD, PERFORMANCE CHARACTERISTICS - PEDESTRIAN DOORSETS, OTHER THAN SWING TYPE, INITIALLY DESIGNED FOR INSTALLATION WITH POWER OPERATION WITHOUT RESISTANCE TO FIRE AND SMOKE LEAKAGE CHARACTERISTICS
UNI EN 15254-4 : 2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
UNE-EN 15254-4:2009 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
BS EN 15254-4 : 2008 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
I.S. EN 15254-4:2008 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS - NON-LOADBEARING WALLS - PART 4: GLAZED CONSTRUCTIONS
BS EN 13022-2:2014 Glass in building. Structural sealant glazing Assembly rules
EN 50583-1:2016 Photovoltaics in buildings - Part 1: BIPV modules
DIN EN 14600:2006-03 DOORSETS AND OPENABLE WINDOWS WITH FIRE RESISTING AND/OR SMOKE CONTROL CHARACTERISTICS - REQUIREMENTS AND CLASSIFICATION
UNE-EN 16361:2014 Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics
UNE-EN 14351-1:2006 Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

PREN 13501-5 : DRAFT 2015 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 5: CLASSIFICATION USING DATA FROM EXTERNAL FIRE EXPOSURE TO ROOFS TESTS
EN 673:2011 Glass in building - Determination of thermal transmittance (U value) - Calculation method
EN 12758:2011 Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties
EN 410:2011 Glass in building - Determination of luminous and solar characteristics of glazing
EN 1096-1:2012 Glass in building - Coated glass - Part 1: Definitions and classification
EN 12898:2001 Glass in building - Determination of the emissivity
EN 1863-1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description
EN 13541:2012 Glass in building - Security glazing - Testing and classification of resistance against explosion pressure
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
EN 1288-3:2000 Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four point bending)
EN 572-2:2012 Glass in building - Basic soda lime silicate glass products - Part 2: Float glass
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 1063:1999 Glass in building - Security glazing - Testing and classification of resistance against bullet attack
EN 572-4:2012 Glass in building - Basic soda lime silicate glass products - Part 4: Drawn sheet glass
EN 357:2004 Glass in building - Fire resistant glazed elements with transparent or translucent glass products - Classification of fire resistance
ISO 9001:2015 Quality management systems — Requirements
EN 572-1:2012+A1:2016 Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties
EN 356:1999 Glass in building - Security glazing - Testing and classification of resistance against manual attack
EN 572-5:2012 Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
EN 1096-3:2012 Glass in building - Coated glass - Part 3: Requirements and test methods for class C and D coatings
EN 12600:2002 Glass in building - Pendulum test - Impact test method and classification for flat glass
EN 1096-2:2012 Glass in building - Coated glass - Part 2: Requirements and test methods for class A, B and S coatings

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.