Name: EN 303 446-2 : 1.1.0 DRAFT
Brand: ETSI

ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 2: SPECIFIC CONDITIONS FOR EQUIPMENT INTENDED TO BE USED IN INDUSTRIAL LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU

Published date

03-27-2017

Publisher

European Telecommunications Standards Institute

Intellectual Property Rights
Foreword
Modal verbs terminology
Introduction
1 Scope
2 References
3 Definitions and abbreviations
4 EMC requirements
Annex A (informative) - Relationship between the
        present document and the essential
        requirements of Directive 2014/53/EU
Annex B (informative) - Use of industrial equipment
        in residential locations
Annex C (informative) - Exclusion bands
Annex D (informative) - Change History
History

Describes requirements in respect of ElectroMagnetic Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for combined and/or integrated equipment intended to be operated within industrial locations.

Committee	ERM WGEMC
DocumentType	Draft
PublisherName	European Telecommunications Standards Institute
Status	Current

TR 103 400 : 1.1.1

ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS

EN 301 489-33 : 1.1.1	ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 33: SPECIFIC CONDITIONS FOR ULTRA-WIDEBAND (UWB) DEVICES; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
EN 50270:2015	Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
EN 60947-8:2003/A2:2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 8: CONTROL UNITS FOR BUILT-IN THERMAL PROTECTION (PTC) FOR ROTATING ELECTRICAL MACHINES (IEC 60947-8:2003/A2:2011)
EN 50561-1:2013/AC:2015	Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 1: Apparatus for in-home use
EN 60947-4-3:2014	Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
EN 62135-2:2015	Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements
EN 61000-6-3:2007/A1:2011/AC:2012	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
EN 301 489-51 : 1.1.1	ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 51: SPECIFIC CONDITIONS FOR AUTOMOTIVE, GROUND BASED VEHICLES AND SURVEILLANCE RADAR DEVICES USING 24,05 GHZ TO 24,25 GHZ, 24,05 GHZ TO 24,5 GHZ, 76 GHZ TO 77 GHZ AND 77 GHZ TO 81 GHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1B OF DIRECTIVE 2014/53/EU
EN 61131-2:2007	Programmable controllers - Part 2: Equipment requirements and tests
EN 61557-12:2008	Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 12: Performance measuring and monitoring devices (PMD)
EG 203 367 : 1.1.1	GUIDE TO THE APPLICATION OF HARMONISED STANDARDS COVERING ARTICLES 3.1B AND 3.2 OF THE DIRECTIVE 2014/53/EU (RED) TO MULTI-RADIO AND COMBINED RADIO AND NON-RADIO EQUIPMENT
EN 50370-2:2003	Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
EN 61326-2-3:2013	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
EN 60947-1:2007/A2:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
EN 60947-5-7:2003	Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
EN 301 489-3 : 1.6.1	ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 3: SPECIFIC CONDITIONS FOR SHORT-RANGE DEVICES (SRD) OPERATING ON FREQUENCIES BETWEEN 9 KHZ AND 246 GHZ
EN 60947-5-2:2007/A1:2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-2: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - PROXIMITY SWITCHES (IEC 60947-5-2:2007/A1:2012)
EN 60947-3:2009/A2:2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS (IEC 60947-3:2008/A2:2015)
EN 61326-1:2013	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
EN 60947-5-6:2000	Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
EN 61439-2 : 2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 2: POWER SWITCHGEAR AND CONTROLGEAR ASSEMBLIES (IEC 61439-2:2011)
EN 60947-4-1 : 2010 AMD 1 2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012)
EN 61000-6-2:2005/corrigendum:2005	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 61326-2-5:2013	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces according to IEC 61784-1
EN 61000-6-4:2007/A1:2011	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN 301 489-52 : 1.1.0 DRAFT	ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 52: SPECIFIC CONDITIONS FOR CELLULAR COMMUNICATION MOBILE AND PORTABLE (UE) RADIO AND ANCILLARY EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1B OF DIRECTIVE 2014/53/EU
2014/53/EU : 2014 COR 1 2015	DIRECTIVE 2014/53/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 16 APRIL 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF RADIO EQUIPMENT AND REPEALING DIRECTIVE 1999/5/EC TEXT WITH EEA RELEVANCE
EN 301 489-17 : 2.2.1	ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 17: SPECIFIC CONDITIONS FOR BROADBAND DATA TRANSMISSION SYSTEMS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
EN 61204-3:2000	Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)
EN 301 489-6 : 1.4.1	ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 6: SPECIFIC CONDITIONS FOR DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT) EQUIPMENT; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF THE DIRECTIVE 2014/53/EU
EN 61800-3 : 2004 AMD 1 2012	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 3: EMC REQUIREMENTS AND SPECIFIC TEST METHODS (IEC 61800-3:2004/A1:2011)
EN 60947-6-1:2005/A1:2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-1: MULTIPLE FUNCTION EQUIPMENT - TRANSFER SWITCHING EQUIPMENT (IEC 60947-6-1:2005/A1:2013)
EN 60947-2:2017	Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
EN 60974-10:2014/A1:2015	ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015)
EN 50370-1 : 2005	Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
EN 50561-3:2016	Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 3: Apparatus operating above 30 MHz
EN 60947-4-2:2012	Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
EN 61326-2-4:2013	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
EN 303 446-1 : 1.1.0 DRAFT	ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR COMBINED AND/OR INTEGRATED RADIO AND NON-RADIO EQUIPMENT; PART 1: REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN RESIDENTIAL, COMMERCIAL AND LIGHT INDUSTRY LOCATIONS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU
EN 61326-2-2:2013	Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
EN 60947-5-9:2007	Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate switches
EN 301 489-1 : 2.1.1	ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.1(B) OF DIRECTIVE 2014/53/EU AND THE ESSENTIAL REQUIREMENTS OF ARTICLE 6 OF DIRECTIVE 2014/30/EU
EN 60947-6-2:2003/A1:2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS)