EN 3838:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Aerospace series - Requirements and tests on user-applied markings on aircraft electrical cables
Superseded date
06-01-2022
Published date
07-07-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Qualification tests
5 Acceptance tests
6 Test methods
This standard specifies tests that should be performed on markings applied by the user to ensure that their durability is satisfactory and that, after application of markings directly to the cable insulation, jacket or sheath, the cable will meet the performance requirements laid down.
| Committee |
ASD-STAN
|
| DevelopmentNote |
Supersedes PREN 3838. (04/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 3838 : 2011 | Identical |
| BS EN 3838:2010 | Identical |
| DIN EN 3838:2011-02 | Identical |
| NBN EN 3838 : 2010 | Identical |
| UNI EN 3838 : 2011 | Identical |
| NF EN 3838 : 2011 | Identical |
| I.S. EN 3838:2010 | Identical |
| UNE-EN 3838:2010 | Identical |
| SN EN 3838 : 2010 | Identical |
| PN EN 3838 : 2010 | Identical |
| NEN EN 3838 : 2010 | Identical |
| 12/30273364 DC : 0 | BS EN 2713-012 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 012: SILVER PLATED COPPER SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 4641-100:2015 | Aerospace series. Cables, optical 125 μm diameter cladding Tight structure 62,5/125 μm core GI fibre 1,8 mm outside diameter. Product standard |
| 12/30275353 DC : 0 | BS EN 4641-301 - AEROSPACE SERIES - CABLES, OPTICAL 125[MU]M DIAMETER CLADDING - PART 301: TIGHT STRUCTURE 50/125 [MU]M GI FIBRE NOMINAL 1.8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| UNI EN 4608-005 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD |
| 16/30352465 DC : 0 | BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4681-002:2012 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 002: GENERAL |
| 15/30333172 DC : 0 | BS EN 4608-001 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND MULTICORE ASSEMBLY, SCREENED AND JACKETED - PART 001: TECHNICAL SPECIFICATION |
| 15/30335854 DC : 0 | BS EN 2346-005 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN - 65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| I.S. EN 4641-100:2015 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 100: TIGHT STRUCTURE 62,5/125 [MU]M CORE GI FIBRE 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 2235 : 200P4 | AEROSPACE SERIES - SINGLE AND MULTICORE ELECTRICAL CABLES, SCREENED AND JACKETED - TECHNICAL SPECIFICATION |
| NF EN 4641-105 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 105: SEMI-LOOSE, RUGGEDIZED QUADRAXIAL CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 5,72 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| UNI EN 3375-002 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 002: GENERAL |
| I.S. EN 4611-002:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL |
| PREN 4604-001 : 200P4 | AEROSPACE SERIES CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| PREN 2713-012 : DRAFT 2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 012: MNA (1 CORE), MNB (PAIR), MNC (3 CORES), MND (4 CORES), CABLES FAMILY - SILVER PLATED COPPER SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 2267-012 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| PREN 4611-002 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL |
| PREN 3375-009 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 009: SINGLE BRAID - CAN BUS - 120 OHMS - TYPE WX - PRODUCT STANDARD |
| PREN 4641-202 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 202: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 9/125 [MU]M SM FIBRE NOMINAL 2,74 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 2714-014 : 200P3 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 014: DR FAMILY, 4 TO 11 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 3375-012 : 200P1 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 012: SINGLE BRAID - STAR QUAD 100 OHMS - 260 DEGREES C - TYPE KH - PRODUCT STANDARD |
| PREN 4612-002 : 200P1 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| PREN 3375-001 : 200P1 | AEROSPACE SERIES CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| PREN 4641-101 : DRAFT 2013 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 101: TIGHT STRUCTURE 62,5 [MU]M CORE GI FIBRE 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 2714-013 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 013: DR FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| EN 2267-010:2017 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 010: DR family, single UV laser printable - Product standard |
| UNI EN 2267-010 : 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 2267-010:2017 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C DR family, single UV laser printable. Product standard |
| EN 4681-001:2017 | Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 001: Technical Specification |
| EN 4681-005:2015 | Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 005: AZ family, single, for use in low pressure atmosphere - Product standard |
| BS EN 2713-004:2006 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C Screened (braided) and jacketed, ink jet printable. Product standard |
| 17/30368766 DC : 0 | PREN 4612-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| UNI EN 4650 : 2011 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| BS EN 4681-002:2012 | Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium General |
| 14/30314191 DC : 0 | BS EN 3375-009 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 009: SINGLE BRAID - CAN BUS - 120 OHMS - TYPE WX - PRODUCT STANDARD |
| 16/30343293 DC : 0 | BS EN 4641-200 - AEROSPACE SERIES - CABLES, OPTICAL 125[MU]M DIAMETER CLADDING - PART 200: SEMI-LOOSE, 9-125[MU]M SM FIBER NOMINAL 0.9 MM OUTSIDE DIAMETER -PRODUCT STANDARD |
| I.S. EN 2266-008:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT (3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD |
| 14/30314194 DC : 0 | BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| 11/30242768 DC : 0 | BS EN 2267-010 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4681-001 : 2013 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| 07/30166580 DC : 0 | BS EN 2714-014 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 AND 260 DEGREES - PART 014: DR FAMILY, 5 TO 7 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| NF EN 4641-103 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 MM DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 MM GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 4681-001:2017 | Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium Technical Specification |
| I.S. EN 2714-014:2016 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 014: DR FAMILY, 4 TO 11 CORES, TAPED, SCREENED (BRAIDED) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 3375-011:2017 | Aerospace series. Cable, electrical for digital data transmission Single braid. Star Quad 100 ohms. Light weight. Type KL. Product standard |
| 16/30344833 DC : 0 | BS EN 4681-006 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| PREN 4641-001 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION |
| UNI EN 4612-002 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| PREN 2267-002 : 200P5 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
| EN 2084:2015 | Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification |
| PREN 2234 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| PREN 4608-001 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| PREN 6059-406 : 200P2 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
| NF EN 4650 : 2010 | AEROSPACE SERIES - WIRE AND CABLE MARKING PROCESS, UV LASER |
| I.S. EN 3375-012:2013 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 012: SINGLE BRAID - STAR QUAD 100 OHMS - 260 DEGREES C - TYPE KH - PRODUCT STANDARD |
| I.S. EN 4608-005:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 2713-012:2017 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 012: MNA (1 CORE), MNB (PAIR), MNC (3 CORES), MND (4 CORES), CABLES FAMILY - SILVER PLATED COPPER SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 4608-004:2015 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 004: DW FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4681-002 : 2013 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 002: GENERAL |
| EN 4611-002:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL |
| BS EN 4681-006:2015 | Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium AZA family, single and multicore assembly, for use in low pressure atmosphere. Product standard |
| I.S. EN 6059-406:2014 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
| BS EN 2084:2015 | Aerospace series. Cables, electrical, general purpose, with conductors in copper or copper alloy. Technical specification |
| I.S. EN 2084:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, GENERAL PURPOSE, WITH CONDUCTORS IN COPPER OR COPPER ALLOY - TECHNICAL SPECIFICATION |
| DIN EN 2235:2015-11 | Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification; German and English version EN 2235:2015 |
| I.S. EN 2714-002:2016 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: SCREENED AND JACKETED - GENERAL |
| I.S. EN 2267-002:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
| I.S. EN 2714-013:2017 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 013: DR FAMILY, SCREENED (SPIRAL) AND JACKETED, UV LASER PRINTABLE - PRODUCT STANDARD |
| I.S. EN 2235:2015 | AEROSPACE SERIES - SINGLE AND MULTICORE ELECTRICAL CABLES, SCREENED AND JACKETED - TECHNICAL SPECIFICATION |
| BS EN 2267-012:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 260°C DZ family, single UV laser printable for use in low pressure atmosphere. Product standard |
| 11/30242754 DC : 0 | BS EN 2267-009 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREE C AND 260 DEGREE C - PART 009: DRA FAMILY, SINGLE AND MULTICORE ASSEMBLY - PRODUCT STANDARD |
| 15/30327684 DC : 0 | BS EN 2084 - AEROSPACE SERIES - CABLES, ELECTRICAL, GENERAL PURPOSE, WITH CONDUCTORS IN COPPER OR COPPER ALLOY - TECHNICAL SPECIFICATION |
| 13/30281823 DC : 0 | BS EN 2267-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: GENERAL |
| NF EN 4641-104 : 2011 | AEROSPACE SERIES - CABLES, OPTICAL 125 MM DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 MM GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| 16/30343287 DC : 0 | BS EN 4641-202 - AEROSPACE SERIES - CABLES, OPTICAL 125[MU]M DIAMETER CLADDING - PART 202 SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 9.0-125 [MU]M SM FIBER NOMINAL 2.74 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 4608-003:2012 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °C DN family. Lightweight. UV Laser printable. Product standard |
| 16/30345022 DC : 0 | BS EN 4611-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL |
| BS EN 6059-406:2014 | Aerospace series. Electrical cables, installation. Protection sleeves. Test methods Vibration |
| 15/30327763 DC : 0 | BS EN 2234 - AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| 17/30370984 DC : 0 | BS EN 4681-001 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| BS EN 3375-012:2013 | Aerospace series. Cable, electrical, for digital data transmission Single braid. Star Quad 100 ohms. 260°C. Type KH. Product standard |
| I.S. EN 4608-003:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD |
| PREN 4641-201 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 201: SEMI-LOOSE STRUCTURE 9/125 [MU]M SM FIBER NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 2234:2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| I.S. EN 2267-012:2015 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 012: DZ FAMILY, SINGLE UV LASER PRINTABLE FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| I.S. EN 4641-104:2010 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| UNI EN 2234 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - TECHNICAL SPECIFICATION |
| I.S. EN 3375-011:2017 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 011: SINGLE BRAID - STAR QUAD 100 OHMS - LIGHT WEIGHT - TYPE KL - PRODUCT STANDARD |
| NF EN 4604-001 : 2010 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR SIGNAL TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| DIN EN 2084:2015-12 | AEROSPACE SERIES - CABLES, ELECTRICAL, GENERAL PURPOSE, WITH CONDUCTORS IN COPPER OR COPPER ALLOY - TECHNICAL SPECIFICATION |
| NF EN 4612-002 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| EN 2267-002:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 002: General |
| EN 2266-008:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 200 °C - Part 008: DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable - Product standard |
| EN 2266-003:2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Ink jet printable - Product standard |
| UNI EN 6059-406 : 2014 | AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
| PREN 4641-106 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 106: SEMI-LOOSE STRUCTURE 62,5/125 [MU]M GI FIBRE NOMINAL 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 2234:2012 | Aerospace series. Cable, electrical, fire resistant. Technical specification |
| BS EN 4611-002:2012 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family General |
| 16/30346718 DC : 0 | BS EN 4641-001 - AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION |
| 11/30256634 DC : 0 | BS EN 4641-101 - AEROSPACE SERIES - CABLES, OPTICAL, 125 M DIAMETER CLADDING - PART 101: TIGHT STRUCTURE 62.5 [MU]M CORE GI FIBRE 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| UNI EN 4608-003 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 003: DN FAMILY - LIGHTWEIGHT - UV LASER PRINTABLE - PRODUCT STANDARD |
| 13/30281821 DC : 0 | BS EN 2084 - AEROSPACE SERIES - CABLES, ELECTRICAL, GENERAL PURPOSE, WITH CONDUCTORS IN COPPER OR COPPER ALLOY - TECHNICAL SPECIFICATION |
| BS EN 3375-002:2012 | Aerospace series. Cable, electrical, for digital data transmission General |
| 12/30273365 DC : 0 | BS EN 2266-008 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT(3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD |
| BS EN 4608-004:2015 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between - 65°C and 260°C DW family. Lightweight. UV Laser printable. Product standard |
| 14/30314192 DC : 0 | BS EN 2714-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: SCREENED AND JACKETED - GENERAL |
| 13/30281820 DC : 0 | BS EN 2235 - AEROSPACE SERIES - SINGLE AND MULTICORE ELECTRICAL CABLES, SCREENED AND JACKETED - TECHNICAL SPECIFICATION |
| BS EN 2713-012:2017 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 °C and 200 °C MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family. Silver plated copper screened (spiral) and jacketed, UV laser printable. Product standard |
| PREN 4608-004 : 200P2 | AEROSPACE SERIES - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKET - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 004: DW FAMILY - LIGHTWEIGHT UV - LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 2266-008:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55°C and 200°C DRP (pair) DRT (3 cores) DRQ (4 cores) family, multicore UV laser printable jacketed cable. Product standard |
| PREN 3375-011 : DRAFT 2014 CORR 15 | AEROSPACE SERIES - CABLE, ELECTRICAL FOR DIGITAL DATA TRANSMISSION - PART 011: SINGLE BRAID - STAR QUAD 100 OHMS - LIGHT WEIGHT - TYPE KL - PRODUCT STANDARD |
| PREN 2714-002 : 200P6 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: SCREENED AND JACKETED - GENERAL |
| PREN 2266-008 : DRAFT 2014 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 200 DEGREES C - PART 008: DRP (PAIR) DRT (3 CORES) DRQ (4 CORES) FAMILY, MULTICORE UV LASER PRINTABLE JACKETED CABLE - PRODUCT STANDARD |
| PREN 4641-200 : DRAFT 2017 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 200: SEMI-LOOSE STRUCTURE 9/125 [MU]M GI FIBRE NOMINAL 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4681-001 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| PREN 3375-002 : 200P2 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 002: GENERAL |
| I.S. EN 4681-005:2015 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 005: AZ FAMILY, SINGLE, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| I.S. EN 2267-010:2017 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| BS EN 2714-006:2006 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C Screened (braided) and jacketed, CO2 laser printable. Product standard |
| BS EN 2235:2015 | Aerospace series. Single and multicore electrical cables, screened and jacketed. Technical specification |
| BS EN 2713-008:2006 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200° Screened (braided) and jacketed, UV laser printable. Product standard |
| BS EN 2713-007:2005 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C Screened (spiral) and jacketed, UV laser printable. Product standard |
| BS EN 2713-003:2005 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200 °C Screened (spiral) and jacketed, ink jet printable. Product standard |
| BS EN 2713-011:2006 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C Silver plated copper screened (spiral) and jacketed, UV laser printable. Product standard |
| BS EN 2713-010:2006 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C Screened (braided) and jacketed, YAG X3 laser printable. Product standard |
| BS EN 2714-013:2017 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 °C and 260 °C DR family, screened (spiral) and jacketed, UV laser printable. Product standard |
| EN 2714-002:2016 | AEROSPACE SERIES - CABLES, ELECTRICAL, SINGLE AND MULTICORE FOR GENERAL PURPOSE - OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 002: SCREENED AND JACKETED - GENERAL |
| EN 2267-008:2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 008: DM family, single UV laser printable and multicore assembly - Product standard |
| EN 4681-002:2012 | Aerospace series - Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium - Part 002: General |
| EN 6059-406:2014 | Aerospace series - Electrical cables, installation - Protection sleeves - Test methods - Part 406: Vibration |
| EN 2267-012:2015 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -55 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard |
| EN 4608-005 : 2012 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - SINGLE AND TWISTED MULTICORE ASSEMBLY, SCREENED (BRAIDED) AND JACKETED - OPERATING TEMPERATURES BETWEEN -65 DEGREE C AND 260 DEGREE C - PART 005: DW FAMILY - LIGHTWEIGHT TWO-CORE GAUGE 24 FOR DATA TRANSMISSION - UV LASER PRINTABLE - PRODUCT STANDARD |
| EN 2714-014:2016 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 014: DR family, 4 to 11 cores, taped, screened (braided) and jacketed, UV laser printable - Product standard |
| EN 4641-101:2015 | Aerospace series - Cables, optical 125 μm diameter cladding - Part 101: Tight structure 62,5 μm core GI fibre 0,9 mm outside diameter - Product standard |
| EN 3375-012 : 2013 | AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 012: SINGLE BRAID - STAR QUAD 100 OHMS - 260 DEGREES C - TYPE KH - PRODUCT STANDARD |
| EN 2713-007:2005 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: Screened (spiral) and jacketed, UV laser printable - Product standard |
| EN 2713-011:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 011: Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard |
| EN 3375-011:2017 | Aerospace series - Cable, electrical for digital data transmission - Part 011: Single braid - Star Quad 100 ohms - Light weight - Type KL - Product standard |
| EN 2266-005:2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 005: UV laser printable - Product standard |
| EN 2267-003:2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 003: Ink jet printable - Product standard |
| EN 4608-004:2015 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 004: DW family - Lightweight - UV Laser printable - Product standard |
| EN 2267-007:2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 260 °C - Part 007: DMA family, single ink-jet printable and multicore assembly - Product standard |
| EN 4641-100:2015 | Aerospace series - Cables, optical 125 μm diameter cladding - Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter - Product standard |
| EN 4608-003:2012 | Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 003: DN family - Lightweight - UV Laser printable - Product standard |
| EN 2713-003 : 2005 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 003: Screened (spiral) and jacketed, ink jet printable - Product standard |
| EN 2266-007 : 2005 | Aerospace series - Cables, electrical, for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 007: UV laser printable multicore jacketed cable - Product standard |
| EN 2713-002:2006 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 002: Screened and jacketed - General |
| EN 2235:2015 | Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification |
| EN 2714-013:2017 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between -55 °C and 260 °C - Part 013: DR family, screened (spiral) and jacketed, UV laser printable - Product standard |
| EN 4612-002:2011 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: General |
| EN 4681-006:2015 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| EN 2234:2018 | Aerospace series - Cable, electrical, fire resistant - Technical specification |
| 14/30300813 DC : 0 | BS EN 4681-001 - AEROSPACE SERIES CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| 16/30344832 DC : 0 | BS EN 4681-005 - AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 005: AZ FAMILY, SINGLE, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| 16/30343296 DC : 0 | BS EN 4641-106 - AEROSPACE SERIES - CABLES, OPTICAL 125[MU]M DIAMETER CLADDING - PART 106: SEMI-LOOSE 62.5-125[MU]M GI FIBER NOMINAL 0.9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 4641-101:2015 | Aerospace series. Cables, optical 125 μm diameter cladding Tight structure 62,5 μm core GI fibre 0,9 mm outside diameter. Product standard |
| BS EN 4681-005:2015 | Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium AZ family, single, for use in low pressure atmosphere. Product standard |
| 16/30343288 DC : 0 | BS EN 4641-201 - AEROSPACE SERIES - CABLES, OPTICAL 125[MU]M DIAMETER CLADDING - PART 201: SEMI-LOOSE 9-125[MU]M SM FIBER NOMINAL 1.8 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 4608-005:2012 | Aerospace series. Cable, electrical, fire resistant. Single and twisted multicore assembly, screened (braided) and jacketed. Operating temperatures between -65 °C and 260 °C DW family. Lightweight two-core gauge 24 for data transmission. UV laser printable. Product standard |
| 12/30259525 DC : 0 | BS EN 6059-406 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 406: VIBRATION |
| 15/30333342 DC : 0 | BS EN 3375-001 - AEROSPACE SERIES - CABLE, ELECTRICAL, FOR DIGITAL DATA TRANSMISSION - PART 001: TECHNICAL SPECIFICATION |
| BS EN 2714-014:2009 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C DR family, 5 to 10 cores, taped, screened (braided) and jacketed, UV laser printable. Product standard |
| BS EN 4612-002:2011 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed General |
| PREN 2346-005 : 200P3 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| PREN 2084 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL, GENERAL PURPOSE, WITH CONDUCTORS IN COPPER OR COPPER ALLOY - TECHNICAL SPECIFICATION |
| PREN 2267-010 : 200P4 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE OPERATING TEMPERATURES BETWEEN -55 DEGREES C AND 260 DEGREES C - PART 010: DR FAMILY, SINGLE UV LASER PRINTABLE - PRODUCT STANDARD |
| UNI EN 4611-002 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL |
| PREN 4681-002 : 200P1 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 002: GENERAL |
| I.S. EN 4681-001:2017 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4612-002:2011 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| I.S. EN 4681-006:2015 | AEROSPACE SERIES - CABLES, ELECTRIC, GENERAL PURPOSE, WITH CONDUCTORS IN ALUMINIUM OR COPPER-CLAD ALUMINIUM - PART 006: AZA FAMILY, SINGLE AND MULTICORE ASSEMBLY, FOR USE IN LOW PRESSURE ATMOSPHERE - PRODUCT STANDARD |
| I.S. EN 4641-101:2015 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 101: TIGHT STRUCTURE 62,5 [MU]M CORE GI FIBRE 0,9 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| I.S. EN 2346-005:2017 | AEROSPACE SERIES - CABLE, ELECTRICAL, FIRE RESISTANT - OPERATING TEMPERATURES BETWEEN -65 DEGREES C AND 260 DEGREES C - PART 005: DW FAMILY, SINGLE UV LASER PRINTABLE AND MULTICORE ASSEMBLY - LIGHT WEIGHT - PRODUCT STANDARD |
| EN 2346-005:2017 | Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard |
| BS EN 2713-002:2006 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C Screened and jacketed. General |
| BS EN 2714-002:2016 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between - 55 °C and 260 °C Screened and jacketed. General |
| BS EN 2267-002:2015 | Aerospace series. Cables, electrical, for general purpose. Operating temperatures between -55 °C and 260 °C General |
| BS EN 2713-006:2006 | Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 200°C Screened (braided) and jacketed, CO<sub>2</sub> laser printable. Product standard |
| EN 2713-012:2017 | Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard |
| EN 3475-401:2002 | Aerospace series - Cables, electrical, aircraft use - Test Methods - Part 401: Accelerated ageing |
| EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking |
| EN 3475-302:2006 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test |
| EN 3475-411:2014 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids |
| EN 3475-405:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at ambient temperature |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN 3475-201:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination |
| ISO 4892-3:2016 | Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
| EN 3475-100:2010 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General |
| EN 3475-705:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.