EN 50163 : 2004 COR 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
Superseded date
02-13-2020
Published date
01-12-2013
1 Scope
2 Normative references
3 Definitions
4 Voltages and frequencies of traction systems
5 Testing
6 Test methodology
Annex A (normative) - Maximum value of the voltage U
according to the duration
Annex B (normative) - Special national conditions
Annex C (informative) - Changes, interruptions and
distortion of voltages
Bibliography
Annex ZZ (informative) - Coverage of Essential Requirements
of EC Directives
Describes the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications: - railways; - guided mass transport systems such as tramways, elevated and underground railways mountain railways, and trolleybus systems; - material transportation systems.
| Committee |
TC 9X
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 50163 : 2005 COR 2 2014 | Identical |
| NEN EN 50163 : 2005 C2 2013 | Identical |
| PN EN 50163 : 2006 AC 2010 | Identical |
| NF EN 50163 : 2005 AMD 1 2007 | Identical |
| NBN EN 50163 : 2005 AMD 1 2007 | Identical |
| I.S. EN 50163:2004 | Identical |
| SN EN 50163 : 2004 AMD 1 2007 | Identical |
| BS EN 50163 : 2004 | Identical |
| VDE 0115-102 : 2005 COR 2 2014 | Identical |
| UNE-EN 50163:2005 | Identical |
| UNE-EN 50163:2005/AC:2013 | Identical |
| ONORM OVE EN 50163 : 1996 | Identical |
| I.S. EN 50463-2:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| 15/30314789 DC : 0 | BS EN 50152-3-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-1: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - DEVICES |
| 09/30200407 DC : 0 | BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| UNE-EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| DD CLC/TS 50535:2010 | Railway applications. Onboard auxiliary power converter systems |
| CLC/TS 50562:2011 | Railway applications - Fixed installations - Process, measures and demonstration of safety for electric traction systems |
| BS EN 50207:2001 | Railway applications. Electronic power converters for rolling stock |
| UNE-EN 50463-1:2013 | Railway applications - Energy measurement on board trains - Part 1: General |
| PREN 50152-3-1 : DRAFT 2015 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-1: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - DEVICES |
| CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 2: Other funicular railways and other installations |
| BS EN 50329 : 2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - TRACTION TRANSFORMERS |
| I.S. EN 50327:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - HARMONISATION OF THE RATED VALUES FOR CONVERTER GROUPS AND TESTS ON CONVERTER GROUPS |
| 09/30214359 DC : 0 | BS EN 50533 - RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| PREN 50463-2 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| I.S. EN 50463-1:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| PD CLC/TS 50238-2:2015 | Railway applications. Compatibility between rolling stock and train detection systems Compatibility with track circuits |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| CEI EN 50328 : 2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
| 14/30247711 DC : 0 | BS EN 50633 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROTECTION PRINCIPLES FOR AC AND DC ELECTRIC TRACTION SYSTEMS |
| BS EN 50533 : 2011 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| 11/30235280 DC : 0 | BS EN 50152-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
| 15/30298489 DC : 0 | BS EN 50124-1 - RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| PREN 15734-1 : DRAFT 2007 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| I.S. EN 50152-3-1:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-1: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - DEVICES |
| BS EN 50238 : 2003 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS |
| 08/30189631 DC : DRAFT SEP 2008 | BS EN 50215 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| PREN 50119 : DRAFT 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| 08/30191365 DC : DRAFT OCT 2008 | BS EN 50388 - RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| PD CLC/TR 50646:2015 | Railway Application. Fixed Installations. Specification for reversible d.c. substations |
| CEI EN 50152-3-3 : 2001 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - VOLTAGE TRANSFORMERS |
| S.R. CLC/TR 50646:2015 | RAILWAY APPLICATION - FIXED INSTALLATIONS - SPECIFICATION FORREVERSIBLE D.C. SUBSTATIONS |
| PREN 50152-3-2 : DRAFT 2015 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE CURRENT TRANSFORMERS |
| UNE-EN 50467:2012 | Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
| NF EN 50122-1 : 2011 AMD 4 2018 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| CEI EN 50388 : 2012 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| I.S. EN 50123-4:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| CEI EN 50526-1 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| CEI CLC/TS 50562 : 2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS |
| BS EN 50238-1:2003 | Railway applications. Compatibility between rolling stock and train detection systems General |
| BS EN 50153 : 2014 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| I.S. EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| UNE-EN 15734-1:2011 | Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions |
| UNE-EN 16185-1:2015 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| I.S. EN 16186-3:2016 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 3: DESIGN OF DISPLAYS |
| BS EN 50206-2:2010 | Railway applications. Rolling stock. Pantographs. Characteristics and tests Pantographs for metros and light rail vehicles |
| I.S. CLC TS 50502:2007 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| I.S. EN 50122-2:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS |
| I.S. EN 50152-3-3:2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - VOLTAGE TRANSFORMERS |
| CEI EN 50215 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| I.S. EN 50124-1:2017 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| I.S. EN 50328:2007 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
| UNE-EN 16186-3:2017 | Railway applications - Driver's cab - Part 3: Design of displays |
| BS EN 50155:2017 | Railway applications. Rolling stock. Electronic equipment |
| 16/30282633 DC : 0 | BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| EN 50388 : 2012 COR 2013 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| EN 50206-1:2010 | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 1: Pantographs for main line vehicles |
| CLC/TS 50591:2013 | Specification and verification of energy consumption for railway rolling stock |
| CLC/TS 50544:2010 | Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters |
| EN 50152-3-1:2017 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices |
| EN 50122-3:2010 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of a.c. and d.c. traction systems |
| EN 50152-3-3:2016 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers |
| EN 50151 : 2003 COR 2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIAL REQUIREMENTS FOR COMPOSITE INSULATORS |
| EN 50206-2:2010 | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
| EN 50238-1 : 2003 COR 2014 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL |
| EN 50152-3-2:2016 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Current transformers |
| OVE/ONORM EN 50124-1 : 2011-05 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| UNE-EN 50122-1:2011 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 1: Protective provisions against electric shock |
| EN 50207:2000 | Railway applications - Electronic power converters for rolling stock |
| BS EN 50617-1:2015 | Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits |
| I.S. EN 50151:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIAL REQUIREMENTS FOR COMPOSITE INSULATORS |
| UNE-EN 50152-2:2013 | Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV |
| I.S. EN 50206-2:2010 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES |
| 96/209091 DC : DRAFT JUN 1996 | EN 50124-2 RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 2: OVERVOLTAGES AND RELATED PROPERTIES |
| BS EN 50463-1:2017 | Railway applications. Energy measurement on board trains General |
| 04/30109471 DC : DRAFT FEB 2004 | EN 50388:2004 - RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR INTEROPERABILITY |
| UNE-EN 50122-3:2011 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 3: Mutual Interaction of a.c. and d.c. traction systems |
| 10/30209452 DC : 0 | BS EN 16185-1 - RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| 11/30213783 DC : 0 | BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| 17/30350234 DC : DRAFT AUG 2017 | BS EN 50641 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - REQUIREMENTS FOR THE VALIDATION OF SIMULATION TOOLS USED FOR THE DESIGN OF TRACTION POWER SUPPLY SYSTEMS |
| BS EN 50328:2003 | Railway applications. Fixed installations. Electronic power convertors for substations |
| 05/30133975 DC : DRAFT MAY 2005 | |
| 09/30202505 DC : 0 | BS EN 50367 - RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - TECHNICAL CRITERIA FOR THE INTERACTION BETWEEN PANTOGRAPH AND OVERHEAD LINE (TO ACHIEVE FREE ACCESS) |
| EN 50562:2018 | Railway applications - Fixed installations - Process, protective measures and demonstration of safety for electric traction systems |
| BS EN 50125-1:2014 | Railway applications. Environmental conditions for equipment Rolling stock and on-board equipment |
| UNE-EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| BS EN 50123-2:2003 | Railway applications. Fixed installations. D.C. switchgear D.C. circuit breakers |
| UNE-EN 50206-1:2011 | Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 1: Pantographs for main line vehicles |
| BS EN 50526-2:2014 | Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices |
| PREN 50388-1 : DRAFT 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN TRACTION POWER SUPPLY AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY - PART 1: GENERAL |
| BS EN 50526-1:2012 | Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters |
| 12/30235267 DC : 0 | BS EN 50125-1 - RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: EQUIPMENT ON BOARD ROLLING STOCK |
| 07/30161352 DC : DRAFT AUG 2007 | BS EN 50345 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION. INSULATING SYNTHETIC ROPE ASSEMBLIES FOR SUPPORT OF OVERHEAD CONTACT LINES |
| BS EN 50215:2009 | Railway applications — Rolling stock — Testing of rolling stock on completion of construction and before entry into service |
| 16/30314785 DC : 0 | BS EN 50562 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, PROTECTIVE MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS |
| 14/30270317 DC : 0 | BS EN 14198 - RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| CEI EN 50467 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| 15/30329543 DC : 0 | BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| PREN 50467 : DRAFT 2009 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| BS EN 50355:2013 | Railway applications. Railway rolling stock cables having special fire performance. Guide to use |
| PREN 50124-1 : DRAFT 2015 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT |
| 17/30341013 DC : DRAFT AUG 2017 | BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| BS EN 14198 : 2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| S.R. CLC/TS 50537-1:2010 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS |
| 18/30332114 DC : 0 | BS EN 50591 - SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| CEI EN 60077-1 : 2002 | RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES |
| I.S. EN 16185-1:2014 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| S.R. CLC/TS 50544:2010 | LOW VOLTAGE D.C. SURGE PROTECTIVE DEVICE FOR TRACTION SYSTEMS - SELECTION AND APPLICATION RULES FOR SURGE ARRESTERS |
| CLC/TS 50502:2008 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and connection systems |
| EN 50123-7-2:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices |
| BS EN 62621 : 2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS (IEC 62621:2011) |
| BS EN 50123-1:2003 | Railway applications. Fixed installations. D.C. switchgear General |
| I.S. EN 50122-1:2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| UNE-EN 50388:2013 | Railway Applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
| BS EN 50122-2:2010 | Railway applications. Fixed installations. Electrical safety, earthing and the return circuit Provisions against the effects of stray currents caused by d.c. traction systems |
| UNE-EN 50633:2017 | Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems |
| I.S. EN 50122-3:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 3: MUTUAL INTERACTION OF A.C. AND D.C. TRACTION SYSTEMS |
| NF EN 15734-1 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| I.S. EN 50533:2011 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| EN 50463-1:2017 | Railway applications - Energy measurement on board trains - Part 1: General |
| EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| PREN 50526-3 : DRAFT 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 3: APPLICATION GUIDE |
| I.S. EN 14198:2016 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| S.R. CLC/TS 50535:2010 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| I.S. CEN TR 14819-2:2006 | SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 2: OTHER FUNICULAR RAILWAYS AND OTHER INSTALLATIONS |
| EN 14198:2016 | Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives |
| CEI EN 50122-2 : 2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS |
| CLC/TR 50488:2006 | Railway applications - Safety measures for the personnel working on or near overhead contact lines |
| UNE-EN 50124-2:2017 | Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
| PREN 14198 : DRAFT 2014 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS FOR GENERAL OPERATION |
| I.S. EN 50388:2012 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| I.S. EN 50206-1:2010 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| I.S. EN 50123-7-2:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING CURRENT TRANSDUCERS AND OTHER CURRENT MEASURING DEVICES |
| I.S. EN 50119:2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| I.S. EN 50155:2017-11 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT |
| DIN EN 50153 : 2018 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| VDE 0115-2 : 2018 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| CEI EN 50345 : 2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - INSULATING SYNTHETIC ROPE ASSEMBLIES FOR SUPPORT OF OVERHEAD CONTACT LINES |
| CLC/TS 50535:2010 | Railway applications - Onboard auxiliary power converter systems |
| 17/30341004 DC : 0 | BS EN 50238-1 - RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL |
| 14/30235257 DC : 0 | BS EN 50641 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - REQUIREMENTS FOR THE VALIDATION OF SIMULATION TOOLS USED FOR THE DESIGN OF TRACTION POWER SUPPLY SYSTEMS |
| CEI EN 50122-3 : 2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 3: MUTUAL INTERACTION OF A.C. AND D.C. TRACTION SYSTEMS |
| 02/205236 DC : DRAFT JUNE 2002 | PREN 50367 - RAILWAY APPLICATIONS - CURRENT COLLECTION SYSTEMS - TECHNICAL CRITERIA FOR THE INTERACTION BETWEEN PANTOGRAPH AND OVERHEAD LINE (TO ACHIEVE FREE ACCESS) |
| 13/30277639 DC : 0 | BS EN 50355 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - GUIDE TO USE |
| 08/30183807 DC : DRAFT JUNE 2008 | BS EN 50206-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: - PANTOGRAPHS FOR MAIN LINE VEHICLES |
| DD CLC/TS 50537-1:2010 | Railway applications. Mounted parts of the traction transformer and cooling system HV bushing for traction transformers |
| 15/30298492 DC : 0 | BS EN 50124-2 - RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 2: OVERVOLTAGES AND RELATED PROTECTION |
| UNE-EN 50122-2:2011 | Railway applications - Fixed installations - Electrical safety, earthing and the return circuit -- Part 2: Provisions against the effects of stray currents caused by d.c. traction systems |
| DD CLC/TS 50544:2010 | Low voltage d.c. surge protective device for traction systems. Selection and application rules for surge arresters |
| 11/30213792 DC : 0 | BS EN 50463-4 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
| RSSB GL/RT1210 : ISSUE 1 AMD 3 2017 | AC ENERGY SUBSYSTEM AND INTERFACES TO ROLLING STOCK SUBSYSTEM |
| 15/30314795 DC : 0 | BS EN 50152-3-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE INDUCTIVE VOLTAGE TRANSFORMERS |
| PREN 50152-3-3 : DRAFT 2015 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE INDUCTIVE VOLTAGE TRANSFORMERS |
| NF EN 50119 : 2010 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| BS EN 50123-7-1:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Measurement, control and protection devices for specific use in d.c. traction systems. Application guide |
| DIN EN 15734-1:2013-09 | Railway applications - Braking systems of high speed trains - Part 1: Requirements and definitions (includes Corrigendum :2013) |
| BS EN 50633:2016 | Railway applications. Fixed installations. Protection principles for AC and DC electric traction systems |
| CEI EN 50124-2 : 2001 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 2: OVERVOLTAGES AND RELATED PROTECTION |
| CEI EN 50355 : 2014 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - GUIDE TO USE |
| NF EN 50215 : 2010 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| 07/30170662 DC : 0 | BS EN 15734-1 - RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| BS EN 50463-2:2017 | Railway applications. Energy measurement on board trains Energy measuring |
| 14/30247708 DC : 0 | BS EN 50526-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 3: APPLICATION GUIDE |
| DD CLC/TS 50467:2008 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| 11/30213786 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| 13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| NF EN 50206-2 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METRO AND LIGHT RAIL VEHICLES |
| BS EN 50327:2003 | Railway applications. Fixed installations. Harmonisation of the rated values for converter groups and tests on converter groups |
| BS EN 50463:2007 | Railway applications. Energy measurement on board trains |
| BS EN 50206-1:2010 | Railway applications. Rolling stock. Pantographs. Characteristics and tests Pantographs for main line vehicles |
| BS EN 50526-3:2016 | Railway application. Fixed installations. D.C. surge arresters and voltage limiting devices Application Guide |
| CEI EN 50123-1 : 2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 1: GENERAL |
| PREN 50355 : DRAFT 2012 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - GUIDE TO USE |
| DD ENV 50152-3.1 : 1999 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - APPLICATION GUIDE |
| BS EN 50152-3-3:2016 | Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Voltage transformers |
| BS EN 50124-2:2017 | Railway applications. Insulation coordination Overvoltages and related protection |
| BS EN 50345:2009 | Railway applications. Fixed installations. Electric traction. Insulating synthetic rope assemblies for support of overhead contact lines |
| EN 50463-2:2017 | Railway applications - Energy measurement on board trains - Part 2: Energy measuring |
| PREN 50463-1 : DRAFT 2015 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| I.S. EN 50215:2009 | RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE |
| CEI EN 50463-2 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| CEI EN 50155 : 2008 | RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK |
| CEI CLC/TS 50537-1 : 2011 | RAILWAY APPLICATIONS - MOUNTED PARTS OF THE TRACTION TRANSFORMER AND COOLING SYSTEM - PART 1: HV BUSHING FOR TRACTION TRANSFORMERS |
| PREN 50152-1 : DRAFT 2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
| I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
| I.S. EN 50152-3-2:2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE CURRENT TRANSFORMERS |
| I.S. EN 50562:2018 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, PROTECTIVE MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS |
| PREN 50526-1 : DRAFT 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| CEI EN 50125-1 : 2014 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: ROLLING STOCK AND ON-BOARD EQUIPMENT |
| PREN 50591 : DRAFT 2018 | SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| I.S. EN 50152-2:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
| I.S. EN 50463:2007 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| I.S. EN 50153:2014 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| S.R. CLC/TS 50502:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| S.R. CLC/TS 50467:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| UNE-EN 50152-3-1:2017 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Devices |
| EN 16185-1:2014 | Railway applications - Braking systems of multiple unit trains - Part 1: Requirements and definitions |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| DIN EN 14198:2017-03 | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| 11/30250871 DC : 0 | BS EN 50388 - RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| 15/30314792 DC : 0 | BS EN 50152-3-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - SINGLE-PHASE CURRENT TRANSFORMERS |
| DD CLC/TS 50238-2:2010 | Railway applications. Compatibility between rolling stock and train detection systems Compatibility with track circuits |
| PREN 50641 : DRAFT 2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - REQUIREMENTS FOR THE VALIDATION OF SIMULATION TOOLS USED FOR THE DESIGN OF TRACTION POWER SUPPLY SYSTEMS |
| I.S. EN 50238:2003 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS |
| I.S. EN 50123-3:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| CEI CLC/TS 50238-2 : 2011 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 2: COMPATIBILITY WITH TRACK CIRCUITS |
| CLC/TS 50537-1:2010 | Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers |
| CEI CLC/TS 50535 : 2011 | RAILWAY APPLICATIONS - ONBOARD AUXILIARY POWER CONVERTER SYSTEMS |
| CEI CLC/TS 50534 : 2011 | RAILWAY APPLICATIONS - GENERIC SYSTEM ARCHITECTURES FOR ONBOARD ELECTRIC AUXILIARY POWER SYSTEMS |
| DD CLC/TS 50534:2010 | Railway applications. Generic system architectures for onboard electric auxiliary power systems |
| 12/30241465 DC : 0 | BS EN 16186-3 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 3: DESIGN OF DISPLAYS |
| 17/30356581 DC : 0 | BS EN 50388-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN TRACTION POWER SUPPLY AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY - PART 1: GENERAL |
| BS EN 50467:2011 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| I.S. EN 50238-1:2003 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL |
| PD CEN/TR 14819-2:2005 | Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Other funicular railways and other installations |
| UNE-EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| BS EN 16185-1:2014 | Railway applications. Braking systems of multiple unit trains Requirements and definitions |
| BS EN 50123-7-3:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices |
| DD CLC/TS 50562:2011 | Railway applications. Fixed Installations. Process, measures and demonstration of safety for electric traction systems |
| CEI EN 50152-3-2 : 2001 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - PART 3-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - CURRENT TRANSFORMERS |
| CEI CLC/TR 50488 : 2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES |
| 04/30117663 DC : DRAFT AUG 2004 | EN 50388 - RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| BS EN 61377-1:2006 | Railway applications. Rolling stock Combined testing of inverter-fed alternating current motors and their control system |
| DD CLC/TS 50502:2008 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and connection systems |
| 15/30329546 DC : 0 | BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING |
| 08/30165463 DC : DRAFT MAY 2008 | BS EN 50122-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS |
| 12/30235298 DC : DRAFT JAN 2012 | BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| 11/30235283 DC : 0 | BS EN 50152-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
| 08/30187483 DC : DRAFT AUG 2008 | BS EN 50122-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 3: MUTUAL INTERACTION OF A.C. AND D.C. TRACTION SYSTEMS |
| CEI CLC/TS 50544 : 2011 | LOW VOLTAGE D.C. SURGE PROTECTIVE DEVICE FOR TRACTION SYSTEMS - SELECTION AND APPLICATION RULES FOR SURGE ARRESTERS |
| S.R. CLC/TS 50562:2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS |
| UNE-EN 50152-1:2013 | Railway applications - Fixed installations - Particular requirements for alternating current switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV |
| PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| NF EN 50206-1 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| PREN 50238-1 : DRAFT 2017 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 1: GENERAL |
| BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
| PREN 50124-2 : DRAFT 2015 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 2: OVERVOLTAGES AND RELATED PROTECTION |
| BS EN 50152-2:2012 | Railway applications. Fixed installations. Particular requirements for alternating current switchgear Disconnectors, earthing switches and switches with nominal voltage above 1 kV |
| I.S. EN 50123-1:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - GENERAL |
| I.S. EN 50152-1:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
| S.R. CLC/TS 50591:2013 | SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| S.R. CLC/TR 50488:2007 | RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES |
| I.S. EN 50617-1:2015 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS |
| PREN 50562 : DRAFT 2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROCESS, PROTECTIVE MEASURES AND DEMONSTRATION OF SAFETY FOR ELECTRIC TRACTION SYSTEMS |
| PREN 50388 : DRAFT 2011 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| I.S. EN 50526-1:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 50526-3:2016 | RAILWAY APPLICATION - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 3: APPLICATION GUIDE |
| I.S. EN 50123-2:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - D.C. CIRCUIT BREAKERS |
| BS EN 50151:2003 | Railway applications. Fixed installations. Electric traction. Special requirements for composite insulators |
| BS EN 50123-7-2:2003 | Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices |
| PREN 50152-2 : DRAFT 2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
| CEI EN 50533 : 2012 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| CEI EN 50152-2 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
| I.S. EN 50125-1:2014 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: ROLLING STOCK AND ON-BOARD EQUIPMENT |
| I.S. EN 50123-7-3:2003 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING VOLTAGE TRANSDUCERS AND OTHER VOLTAGE MEASURING DEVICES |
| I.S. EN 50345:2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - INSULATING SYNTHETIC ROPE ASSEMBLIES FOR SUPPORT OF OVERHEAD CONTACT LINES |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| I.S. EN 50119:2020 | Railway applications - Fixed installations - Electric traction overhead contact lines |
| UNE-EN 62621:2016 | Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems |
| UNE-EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| UNE-EN 50152-3-3:2016 | Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Voltage transformers |
| UNE-EN 50206-2:2011 | Railway applications - Rolling stock - Pantographs: Characteristics and tests -- Part 2: Pantographs for metros and light rail vehicles |
| 08/30182527 DC : DRAFT MAY 2008 | BS EN 50122-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| 08/30160532 DC : DRAFT MAY 2008 | BS EN 50122-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND BONDING - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| BS EN 50122-1 : 2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| CLC/TS 50467 : 2008 COR 2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 50355:2013 | Railway applications - Railway rolling stock cables having special fire performance - Guide to use |
| ENV 50152-3-1 : 1999 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS PARTICULAR REQUIREMENTS FOR A.C. SWITCHGEAR - MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN A.C. TRACTION SYSTEMS - APPLICATION GUIDE |
| EN 16186-3:2016 | Railway applications - Driver's cab - Part 3: Design of displays |
| EN 50123-7-3:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices |
| BS EN 50119 : 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| UNE-EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| BS EN 50152-1 : 2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
| UNE-EN 50533:2012 | Railway applications - Three-phase train line voltage characteristics. |
| 09/30208429 DC : 0 | BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| PD CLC/TS 50591:2013 | Specification and verification of energy consumption for railway rolling stock |
| EN 50124-2:2017 | Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
| PREN 50125-1 : DRAFT 2012 | RAILWAY APPLICATIONS - ENVIRONMENTAL CONDITIONS FOR EQUIPMENT - PART 1: EQUIPMENT ON BOARD ROLLING STOCK |
| 05/30141113 DC : 0 | EN 50463 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS |
| PREN 50533 : DRAFT 2009 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| BS EN 50124-1:2017 | Railway applications. Insulation coordination Basic requirements. Clearances and creepage distances for all electrical and electronic equipment |
| UNE-EN 50526-3:2016 | Railway application - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3: Application Guide |
| BS EN 50122-3:2010 | Railway applications. Fixed installations. Electrical safety, earthing and the return circuit Mutual Interaction of a.c. and d.c. traction systems |
| BS EN 15734-1:2010 | Railway applications. Braking systems of high speed trains Requirements and definitions |
| BS EN 16186-3 : 2016 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 3: DESIGN OF DISPLAYS |
| BS EN 50388:2012 | Railway Applications. Power supply and rolling stock. Technical criteria for the coordination between power supply (substation) and rolling stock to achieve interoperability |
| 08/30183804 DC : DRAFT JUNE 2008 | BS EN 50206-2 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES |
| I.S. EN 50124-2:2017 | RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 2: OVERVOLTAGES AND RELATED PROTECTION |
| PREN 50633 : DRAFT 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PROTECTION PRINCIPLES FOR AC AND DC ELECTRIC TRACTION SYSTEMS |
| UNE-EN 50345:2010 | Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines |
| CEI EN 50206-1 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS: CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES |
| NF EN 50122-2 : 2011 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C - TRACTION SYSTEMS |
| CLC/TS 50534:2010 | Railway applications - Generic system architectures for onboard electric auxiliary power systems |
| I.S. EN 62621:2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS |
| DIN EN 14198:2015-01 (Draft) | RAILWAY APPLICATIONS - BRAKING - REQUIREMENTS FOR THE BRAKE SYSTEM OF TRAINS HAULED BY LOCOMOTIVES |
| I.S. EN 15734-1:2010 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| CEI CLC/TS 50591 : 2014 | SPECIFICATION AND VERIFICATION OF ENERGY CONSUMPTION FOR RAILWAY ROLLING STOCK |
| CEI EN 50463-1 : 2013 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL |
| CEI EN 50526-2 : 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| I.S. EN 50526-2:2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| I.S. EN 50329:2007 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - TRACTION TRANSFORMERS |
| BS EN 50152-3-1:2017 | Railway applications. Fixed installations. Particular requirements for a.c. switchgear Measurement, control and protection devices for specific use in a.c. traction systems. Devices |
| S.R. CLC/TS 50238-2:2015 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 2: COMPATIBILITY WITH TRACK CIRCUITS |
| EN 50328 : 2003 COR 2006 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRONIC POWER CONVERTERS FOR SUBSTATIONS |
| UNI EN 15734-1 : 2011 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| I.S. EN 50355:2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK CABLES HAVING SPECIAL FIRE PERFORMANCE - GUIDE TO USE |
| S.R. CLC/TS 50534:2010 | RAILWAY APPLICATIONS - GENERIC SYSTEM ARCHITECTURES FOR ONBOARD ELECTRIC AUXILIARY POWER SYSTEMS |
| CLC/TS 50238-2 : 2015 COR 2016 | RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 2: COMPATIBILITY WITH TRACK CIRCUITS |
| EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| EN 15734-1:2010/AC:2013 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF HIGH SPEED TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| EN 50327 : 2003 AMD 1 2005 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - HARMONISATION OF THE RATED VALUES FOR CONVERTER GROUPS AND TESTS ON CONVERTER GROUPS |
| EN 50633:2016 | Railway applications - Fixed installations - Protection principles for AC and DC electric traction systems |
| EN 50329:2003/A1:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - TRACTION TRANSFORMERS |
| EN 50152-2:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 2: DISCONNECTORS, EARTHING SWITCHES AND SWITCHES WITH NOMINAL VOLTAGE ABOVE 1 KV |
| EN 50123-1:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 1: General |
| EN 50122-2:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS |
| DIN EN 16185-1:2015-03 | RAILWAY APPLICATIONS - BRAKING SYSTEMS OF MULTIPLE UNIT TRAINS - PART 1: REQUIREMENTS AND DEFINITIONS |
| EN 61377-1:2006/corrigendum:2006 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
| EN 50123-7-1:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide |
| EN 50123-4:2003/A1:2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| EN 50526-3:2016 | Railway application - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3: Application Guide |
| EN 50123-2:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 2: D.C. circuit breakers |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 50152-1 : 2012 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - PARTICULAR REQUIREMENTS FOR ALTERNATING CURRENT SWITCHGEAR - PART 1: CIRCUIT-BREAKERS WITH NOMINAL VOLTAGE ABOVE 1 KV |
| EN 50467 : 2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 50533 : 2011 AMD 1 2016 | RAILWAY APPLICATIONS - THREE-PHASE TRAIN LINE VOLTAGE CHARACTERISTICS |
| EN 50345:2009 | Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines |
| EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| EN 50463:2007 | Railway applications - Energy measurement on board trains |
| EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| CLC/TR 50646:2015 | Railway Application - Fixed Installations - Specification for reversible d.c. substations |
| EN 62621:2016/A1:2016 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS |
| EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| EN 50123-3:2003/A1:2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES |
| EN 50160 : 2010 AMD 1 2015 | VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS |
| EN 50124-2:2017 | Railway applications - Insulation coordination - Part 2: Overvoltages and related protection |
| EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
| EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
| UIC 550-2 : 1ED 1994 | POWER SUPPLY SYSTEMS FOR PASSENGER COACHES - TYPE TESTING |
| UIC 550 : 11ED 2005 | POWER SUPPLY INSTALLATIONS FOR PASSENGER STOCK |
| PREN 50388 : DRAFT 2011 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| 96/48/EC : 1996 | COUNCIL DIRECTIVE 96/48/EC OF 23 JULY 1996 ON THE INTEROPERABILITY OF THE TRANS-EUROPEAN HIGH-SPEED RAIL SYSTEM |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.