EN 50491-3:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 3: Electrical safety requirements
Superseded date
01-01-2018
Published date
07-22-2009
Introduction
1 Scope
2 Normative references
3 Definitions and abbreviations
4 Classification of HBES/BACS network interfaces
5 Safety requirements and compliance criteria
Annex A (normative) - Special national conditions
Bibliography
This European Standard provides the electrical safety requirements for all devices connected to HBES/BACS. This European Standard is applicable to –operator stations and other human system interface devices, –devices for management functions, –control devices, automation stations and application specific controllers, –field devices, –cabling and interconnection of devices. This European Standard covers the following requirements and compliance criteria: –protection from hazards in the device; –protection from overvoltages on the network; –protection from touch current; –protection from hazards caused by different type of circuits; –protection of the communication wiring from overheating caused by excessive current.
| Committee |
CLC/TC 205
|
| DevelopmentNote |
Partially supersedes EN 50090-2-2. (01/2010)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 50491-3 : 2011 | Identical |
| NEN EN 50491-3 : 2009 | Identical |
| VDE 0849-3 : 2010 | Identical |
| PN EN 50491-3 : 2010 | Identical |
| CEI EN 50491-3 : 2010 | Identical |
| BS EN 50491-3:2009 | Identical |
| NBN EN 50491-3 : 2009 | Identical |
| I.S. EN 50491-3:2009 | Identical |
| DIN EN 50491-3 : 2010 | Identical |
| UNE-EN 50491-3:2010 | Identical |
| 12/30255105 DC : 0 | BS EN 13321-1 - OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - HOME AND BUILDING ELECTRONIC SYSTEM - PART 1: PRODUCT AND SYSTEM REQUIREMENTS |
| EN 62949:2017 | Particular safety requirements for equipment to be connected to information and communication networks |
| S.R. CLC/TR 50491-6-3:2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 6-3: HBES INSTALLATIONS - ASSESSMENT AND DEFINITION OF LEVELS |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| DIN EN 13321-1:2012-12 | Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements; German version EN 13321-1:2012 |
| BS EN 50491-6-1:2014 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) HBES installations. Installation and planning |
| EN 50090-1:2011 | Home and Building Electronic Systems (HBES) - Part 1: Standardization structure |
| EN 50491-1:2014 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements |
| BS EN 50491-1:2014 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General requirements |
| BS EN 50090-1:2011 | Home and building electronic systems (HBES) Standardization structure |
| I.S. EN 62949:2017 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS |
| CEI EN 50090-1 : 2011 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 1: STANDARDIZATION STRUCTURE |
| BS EN 62949:2017 | Particular safety requirements for equipment to be connected to information and communication technology networks |
| UNI EN 13321-1 : 2012 | OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - HOME AND BUILDING ELECTRONIC SYSTEM - PART 1: PRODUCT AND SYSTEM REQUIREMENTS |
| CEI CLC/TR 50491-6-3 : 2012 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 6-3: HBES INSTALLATIONS - ASSESSMENT AND DEFINITION OF LEVELS |
| IEC 62949:2017 | Particular safety requirements for equipment to be connected to information and communication technology networks |
| I.S. EN 13321-1:2012 | OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - HOME AND BUILDING ELECTRONIC SYSTEM - PART 1: PRODUCT AND SYSTEM REQUIREMENTS |
| EN 13321-1:2012 | Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements |
| CLC/TR 50491-6-3:2011 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-3: HBES installations - Assessment and definition of levels |
| 17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| I.S. EN 50491-6-1:2014 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 6-1: HBES INSTALLATIONS - INSTALLATION AND PLANNING |
| I.S. EN 50491-1:2014 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 1: GENERAL REQUIREMENTS |
| PREN 13321-1 : DRAFT 2012 | OPEN DATA COMMUNICATION IN BUILDING AUTOMATION, CONTROLS AND BUILDING MANAGEMENT - HOME AND BUILDING ELECTRONIC SYSTEM - PART 1: PRODUCT AND SYSTEM REQUIREMENTS |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| UNE-EN 50090-1:2011 | Home and Building Electronic Systems (HBES) - Part 1: Standardization structure |
| I.S. EN 50090-1:2011 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 1: STANDARDIZATION STRUCTURE |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| BS EN 13321-1:2012 | Open data communication in building automation, controls and building management. Home and building electronic system Product and system requirements |
| UNE-EN 13321-1:2013 | Open data communication in building automation, controls and building management - Home and building electronic system - Part 1: Product and system requirements |
| CEI EN 62949 : 1ED 2017 | PARTICULAR SAFETY REQUIREMENTS FOR EQUIPMENT TO BE CONNECTED TO INFORMATION AND COMMUNICATION NETWORKS |
| BS EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| BS EN 50491-5-1:2010 | General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS) EMC requirements, conditions and test set-up |
| NF EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| IEC GUIDE 110:2014 | Home control systems - Guidelines relating to safety |
| CEI EN 50491-5-1 : 2011 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| I.S. EN 50491-4-1:2012 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| CEI EN 50491-4-1 : 2014 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 4-1: GENERAL FUNCTIONAL SAFETY REQUIREMENTS FOR PRODUCTS INTENDED TO BE INTEGRATED IN BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) |
| UNE-EN 50491-4-1:2013 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| I.S. EN 50491-5-1:2010 | GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 5-1: EMC REQUIREMENTS, CONDITIONS AND TEST SET-UP |
| EN 50491-6-1:2014 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 6-1: HBES installations - Installation and planning |
| EN 50491-4-1:2012 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 4-1: General functional safety requirements for products intended to be integrated in Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) |
| EN 50491-5-1:2010 | General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| EN 60730-2-14:1997/A2:2008 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-14: PARTICULAR REQUIREMENTS FOR ELECTRIC ACTUATORS |
| IEC 60730-2-11:2006 | Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators |
| EN 62094-1:2003/A11:2003 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 60065:2014/AC:2017-01 | AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016) |
| IEC 60364-5-523:1999 | Electrical installations of buildings - Part 5: Selection and erection of electrical equipment - Section 523: Current-carrying capacities in wiring systems |
| IEC 60050-195:1998 | International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| ISO 16484-2:2004 | Building automation and control systems (BACS) — Part 2: Hardware |
| IEC TR 62102:2005 | Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks |
| HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| IEC 62151:2000 | Safety of equipment electrically connected to a telecommunication network |
| IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV | Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches |
| IEC 60730-2-14:2017 | Automatic electrical controls - Part 2-14: Particular requirements for electric actuators |
| HD 384.7.702 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND OTHER BASINS |
| HD 60364-7-701:2007/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-701: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - LOCATIONS CONTAINING A BATH OR SHOWER |
| IEC 61180-2:1994 | High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
| IEC 60364-7-702:2010 | Low-voltage electrical installations - Part 7-702: Requirements for special installations or locations - Swimming pools and fountains |
| IEC 60364-7-701:2006 | Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower |
| EN 41003:2008 | Particular safety requirements for equipment to be connected to telecommunication networks and/or a cable distribution system |
| HD 384.5.523 : 200S2 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SECTION 523: CURRENT-CARRYING CAPACITIES IN WIRING SYSTEMS |
| IEC 62094-1:2002 | Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements |
| EN 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 62080:2001+AMD1:2008+AMD2:2015 CSV | Sound signalling devices for household and similar purposes |
| EN 50428 : 2005 AMD 2 2009 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - COLLATERAL STANDARD - SWITCHES AND RELATED ACCESSORIES FOR USE IN HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| HD 193 : 200S2 | VOLTAGE BANDS FOR ELECTRICAL INSTALLATIONS OF BUILDINGS |
| EN 60730-2-11:2008 | Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators |
| HD 60364-7-715:2012/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-715: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - EXTRA-LOW-VOLTAGE LIGHTING INSTALLATIONS |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 61180-1:1992 | High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| EN 61180-2:1994 | High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60364-7-715:2011 | Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations |
| EN 61180-1:1994 | High-voltage test techniques for low-voltage equipment - Part 1: Definitions, test and procedure requirements |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN ISO 16484-2:2004 | Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004) |
| EN 62080:2009/A2:2015 | SOUND SIGNALLING DEVICES FOR HOUSEHOLD AND SIMILAR PURPOSES (IEC 62080:2001/A2:2015) |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| EN 60990:2016 | Methods of measurement of touch current and protective conductor current |
| CLC/TR 62102:2006 | Electrical safety - Classification of interfaces for equipment to be connected to information and communications technology networks |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.