EN 55016-1-4:2010/A2:2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-4: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNAS AND TEST SITES FOR RADIATED DISTURBANCE MEASUREMENTS (CISPR 16-1-4:2010/A2:2017)
Superseded date
01-29-2022
Published date
01-12-2013
FOREWORD
INTRODUCTION (to Amendment 1)
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Antennas for measurement of radiated radio disturbance
5 Test sites for measurement of radio disturbance field strength
for the frequency range of 30 MHz to 1000 MHz
6 Reverberating chamber for total radiated power measurement
7 TEM cells for immunity to radiated disturbance measurement
8 Test sites for measurement of radio disturbance field strength
for the frequency range 1 GHz to 18 GHz
9 Common mode absorption devices
Annex A (normative) - Parameters of antennas
Annex B (normative) - Monopole (1 m rod) antenna performance
equations and characterization of the associated antenna
matching network
Annex C (normative) - Loop antenna system for magnetic field
induced-current measurements in the frequency range of 9
kHz to 30 MHz
Annex D (normative) - Construction details for open area test
sites in the frequency range of 30 MHz to 1000 MHz
Annex E - Void
Annex F (informative) - Basis for 4 dB site acceptability
criterion
Annex G (informative) - Examples of uncertainty budgets
for site validation of a COMTS using RSM with a
calibrated antenna pair
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Describes the characteristics and performance of equipment for the measurement of radiated disturbances in the frequency range 9 kHz to 18 GHz.
| Committee |
TC 210
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NBN EN 55016 1-4 : 2010 AMD 1 2013 | Identical |
| I.S. EN 55016-1-4:2010 | Identical |
| BS EN 55016-1-4 : 2010 | Identical |
| CEI EN 55016-1-4/A2:2018 | Identical |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Identical |
| OVE/ONORM EN 55016-1-4 : 2013-06 | Identical |
| OVE EN 55016-1-4: 2019 | Identical |
| VDE 0876-16-1-4:2019-02 | Identical |
| CEI EN 55016-1-4/A2:2010 | Identical |
| DIN EN 55016-1-4 : 2019-02 | Identical |
| DIN EN 55016-1-4 : 2013 | Identical |
| CISPR 16-1-4:2010/AMD2:2017 | Identical |
| PN EN 55016-1-4 : 2010 AMD 2 2017 | Identical |
| UNE-EN 55016-1-4:2011 | Identical |
| NEN EN 55016-1-4 : 2010 AMD 2 2017 | Identical |
| NF EN 55016-1-4 : 2010 AMD 2 2017 | Identical |
| SN EN 55016-1-4 : AMD 2 2005 | Identical |
| VDE 0876-16-1-4 : 2013 | Identical |
| BS EN 55016-1-4:2010+A2:2017 | Identical |
| CEI EN 55016-2-2 : 2012 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-2: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - MEASUREMENT OF DISTURBANCE POWER |
| CEI EN 61000-4-22 : 2014 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS) |
| CEI EN 62488-2 : 1ED 2018 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| BS EN 61000-6-3 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| PREN 12895 : DRAFT 2013 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| 13/30252774 DC : 0 | BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| I.S. EN 55014-1:2017 | ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 1: EMISSION |
| EN 50121-3-2:2016 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| I.S. EN 55016-2-3:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS |
| I.S. EN 50121-2:2017 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
| EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| I.S. EN 60974-10:2014 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 50121-3-2:2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| BS EN 55022:2010 | Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement |
| BS EN 50065-1:2011 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz General requirements, frequency bands and electromagnetic disturbances |
| UNE-EN 50121-3-2:2017 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| I.S. EN 62488-2:2017 | POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC |
| I.S. EN 12895:2015 | INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| BS EN 12895:2015 | Industrial trucks. Electromagnetic compatibility |
| EN 50083-8:2013 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS |
| EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| EN 12895:2015 | Industrial trucks - Electromagnetic compatibility |
| EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
| EN 55022:2010/AC:2011 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| EN 55016-2-4:2004 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-4: Methods of measurement of disturbances and immunity - Immunity measurements |
| EN 55013:2013/A1:2016 | SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 13:2009, MODIFIED) |
| EN 55016-2-2:2011 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 55012:2007/A1:2009 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS |
| I.S. EN 61967-4:2002 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 4: MEASUREMENT OF CONDUCTED EMISSIONS - 1 OHM/150 OHM DIRECT COUPLING METHOD |
| BS EN 55016-1-6 : 2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION |
| NF EN 301489-1 : 2012 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENTS |
| 16/30340728 DC : 0 | BS EN 50121-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
| BS EN 55016-4-2 : 2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| BS EN 55025:2017 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics. Limits and methods of measurement for the protection of on-board receivers |
| BS EN 55016-2-2:2004 | Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| I.S. EN 55015:2013 | LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL LIGHTING AND SIMILAR EQUIPMENT |
| BS EN 55012 : 2007 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS |
| BS EN 55016-1-5:2015 | Specification for radio disturbance and immunity measuring apparatus and methods Radio disturbance and immunity measuring apparatus. Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
| I.S. EN 61131-2:2007 | PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
| UNE-EN 55016-4-2:2012 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| I.S. EN 55013:2013 | SOUND AND TELEVISION BROADCAST RECEIVERS AND ASSOCIATED EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 13:2009, (MOD)) |
| BS EN 50121-2:2017 | Railway applications. Electromagnetic compatibility Emission of the whole railway system to the outside world |
| CEI EN 61967-4 : 2009 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 4: MEASUREMENT OF CONDUCTED EMISSIONS - 1 OHM/150 OHM DIRECT COUPLING METHOD |
| EN 55014-1:2017 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| UNE-EN 55015:2013 | Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
| I.S. ETSI EN 301489-1 V1.8.1:2009 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS |
| UNE-EN 55014-1:2017 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
| BS EN 61131-2:2007 | Programmable controllers Equipment requirements and tests |
| EN 50065-1:2011 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances |
| BS EN 60974-10 : 2014 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| 13/30252768 DC : 0 | BS EN 50121-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
| BS EN 62488-2:2017 | Power line communication systems for power utility applications Analogue power line carrier terminals or APLC |
| BS EN 55016-2-4:2004 | Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity. Immunity measurements |
| 13/30257892 DC : 0 | BS EN 12895 - INDUSTRIAL TRUCKS - ELECTROMAGNETIC COMPATIBILITY |
| 06/30157139 DC : 0 | |
| UNE-EN 55016-2-2:2012 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-2: Methods of measurement of disturbances and immunity - Measurement of disturbance power |
| 10/30235496 DC : 0 | BS EN 50065-1 - SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 1: GENERAL REQUIREMENTS, FREQUENCY BANDS AND ELECTROMAGNETIC DISTURBANCES |
| BS EN 61000-4-20:2003 | Electromagnetic Compatibility (EMC) Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| BS EN 61000-4-22:2011 | Electromagnetic compatibility (EMC) Testing and measurement techniques. Radiated emission and immunity measurements in fully anechoic rooms (FARs) |
| 09/30202783 DC : 0 | BS EN 50065-1:2001+A1 - SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 1: GENERAL REQUIREMENTS, FREQUENCY BANDS AND ELECTROMAGNETIC DISTURBANCES |
| UNE-EN 50121-2:2017 | Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
| UNE-EN 55011:2011 | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| BS EN 55015 : 2013 | LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF ELECTRICAL LIGHTING AND SIMILAR EQUIPMENT |
| BS EN 55013:2013 | Sound and television broadcast receivers and associated equipment. Radio disturbance characteristics. Limits and methods of measurement |
| BS EN 61000-6-4 : 2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| BS EN 55016-1-1 : 2010 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS |
| CEI EN 50121-2 : 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
| I.S. EN 62135-2:2015 | RESISTANCE WELDING EQUIPMENT - PART 2: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS |
| I.S. EN 55022:2010 | INFORMATION TECHNOLOGY EQUIPMENT - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT (CISPR 22:2008) |
| PREN 50121-3-2 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| I.S. EN 55016-1-5:2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-5: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNA CALIBRATION SITES AND REFERENCE TEST SITES FOR 5 MHZ TO 18 GHZ |
| EN 55016-1-5:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-5: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNA CALIBRATION SITES AND REFERENCE TEST SITES FOR 5 MHZ TO 18 GHZ (CISPR 16-1-5:2014/A1:2016) |
| EN 55016-4-2:2011/A1:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| UNE-EN 12895:2016 | Industrial trucks - Electromagnetic compatibility |
| 14/30281719 DC : 0 | BS EN 50561-3 - POWERLINE COMMUNICATION APPARATUS USED IN LOW-VOLTAGE INSTALLATIONS - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT - PART 3: APPARATUS OPERATING ABOVE 30 MHZ |
| I.S. EN 61000-6-3:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006 (EQV)) |
| BS EN 50121-3-2:2016 | Railway applications. Electromagnetic compatibility Rolling stock. Apparatus |
| UNE-EN 50561-3:2016 | Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 3: Apparatus operating above 30 MHz |
| 16/30340734 DC : 0 | BS EN 50121-3-2 - RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 3-2: ROLLING STOCK - APPARATUS |
| PREN 50561-3 : DRAFT 2014 | POWERLINE COMMUNICATION APPARATUS USED IN LOW-VOLTAGE INSTALLATIONS - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT - PART 3: APPARATUS OPERATING ABOVE 30 MHZ |
| I.S. EN 55011:2016 | INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| EN 62488-2:2017 | Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC |
| I.S. EN 50065-1:2011 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 1: GENERAL REQUIREMENTS, FREQUENCY BANDS AND ELECTROMAGNETIC DISTURBANCES |
| BS EN 55011 : 2016 | INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| CEI EN 55011 : 2017 | INDUSTRIAL, SCIENTIFIC AND MEDICAL EQUIPMENT - RADIO-FREQUENCY DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT |
| CEI EN 55025 : 2009 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS |
| CEI EN 50083-8 : 2014 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS |
| CEI EN 55016-2-4 : 2006 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-4: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - IMMUNITY MEASUREMENTS |
| I.S. EN 55025:2017 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS |
| I.S. EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| I.S. EN 55016-2-2:2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-2: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - MEASUREMENT OF DISTURBANCE POWER |
| UNE-EN 61000-4-20:2011 | Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides - Basic EMC publication |
| UNE-EN 61000-6-4:2007 | Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments |
| UNE-EN 50065-1:2012 | Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances |
| I.S. EN 61000-6-4:2007 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| UNE-EN 61000-4-22:2011 | Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) |
| CEI EN 50065-1 : 2012 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ - PART 1: GENERAL REQUIREMENTS, FREQUENCY BANDS AND ELECTROMAGNETIC DISTURBANCES |
| BS EN 50561-3:2016 | Power line communication apparatus used in low-voltage installations. Radio disturbance characteristics. Limits and methods of measurement Apparatus operating above 30 MHz |
| PREN 50065-1 : DRAFT 2010 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148.5 KHZ - PART 1: GENERAL REQUIREMENTS, FREQUENCY BANDS AND ELECTROMAGNETIC DISTURBANCES |
| BS EN 62135-2:2015 | Resistance welding equipment Electromagnetic compatibility (EMC) requirements |
| BS EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity. Radiated disturbance measurements |
| I.S. EN 50561-3:2016 | POWER LINE COMMUNICATION APPARATUS USED IN LOW-VOLTAGE INSTALLATIONS - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT - PART 3: APPARATUS OPERATING ABOVE 30 MHZ |
| BS EN 61000-6-3 : 2007 : INC : AMD 1 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
| UNE-EN 55022:2011 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| I.S. EN 55012:2007 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF OFF-BOARD RECEIVERS |
| EN 50121-2:2017 | Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
| I.S. EN 55016-4-2:2011 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 4-2: UNCERTAINTIES, STATISTICS AND LIMIT MODELLING - MEASUREMENT INSTRUMENTATION UNCERTAINTY |
| I.S. EN 55016-2-4:2004 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-4: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - IMMUNITY MEASUREMENTS |
| BS EN 50083-8:2013 | Cable networks for television signals, sound signals and interactive services Electromagnetic compatibility for networks |
| EN 55025:2017/AC:2017-11 | VEHICLES, BOATS AND INTERNAL COMBUSTION ENGINES - RADIO DISTURBANCE CHARACTERISTICS - LIMITS AND METHODS OF MEASUREMENT FOR THE PROTECTION OF ON-BOARD RECEIVERS (CISPR 25:2016/COR1:2017) |
| I.S. EN 55016-1-6:2015 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION |
| PREN 50121-2 : DRAFT 2016 | RAILWAY APPLICATIONS - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMISSION OF THE WHOLE RAILWAY SYSTEM TO THE OUTSIDE WORLD |
| UNE-EN 55013:2013 | Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
| I.S. EN 50083-8:2013 | CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 8: ELECTROMAGNETIC COMPATIBILITY FOR NETWORKS |
| I.S. EN 61000-4-22:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-22: TESTING AND MEASUREMENT TECHNIQUES - RADIATED EMISSION AND IMMUNITY MEASUREMENTS IN FULLY ANECHOIC ROOMS (FARS) |
| EN 61967-4 : 2002 COR 2017 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC EMISSIONS, 150 KHZ TO 1 GHZ - PART 4: MEASUREMENT OF CONDUCTED EMISSIONS - 1 OHM/150 OHM DIRECT COUPLING METHOD (IEC 61967-4:2002/COR1:2017) |
| EN 61000-6-3 : 2007 : INC : AMD 1 : 2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 55016-1-6:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION (CISPR 16-1-6:2014/A1:2017) |
| EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
| EN 50561-3:2016 | Power line communication apparatus used in low-voltage installations - Radio disturbance characteristics - Limits and methods of measurement - Part 3: Apparatus operating above 30 MHz |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN 61000-4-22:2011 | Electromagnetic compatibility (EMC) - Part 4-22: Testing and measurement techniques - Radiated emission and immunity measurements in fully anechoic rooms (FARs) |
| EN 62135-2:2015 | Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements |
| EN 60974-10:2014/A1:2015 | ARC WELDING EQUIPMENT - PART 10: ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS (IEC 60974-10:2014/A1:2015) |
| UNE-EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| EN 55016-1-6:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION (CISPR 16-1-6:2014/A1:2017) |
| CLC/TR 50484:2009 | Recommendations for shielded enclosures |
| IEC 61169-8:2007 | Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 Ω (type BNC) |
| CISPR 16-4-2:2011+AMD1:2014 CSV | Specification for radio disturbance and immunity measuring apparatusand methods - Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty |
| EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| CISPR 16-1-5:2014+AMD1:2016 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-5: Radio disturbance and immunity measuring apparatus - Antenna calibration sites and reference test sites for 5 MHz to 18 GHz |
| EN 55016-1-5:2015/A1:2017 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-5: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - ANTENNA CALIBRATION SITES AND REFERENCE TEST SITES FOR 5 MHZ TO 18 GHZ (CISPR 16-1-5:2014/A1:2016) |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| IEC 61000-4-20:2010 | Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ANSI C63.5 : 2006 | ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
| ETR 273-1-1 : 20001 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPROVEMENT OF RADIATED METHODS OF MEASUREMENT (USING TEST SITES) AND EVALUATION OF THE CORRESPONDING MEASUREMENT UNCERTAINTIES; PART 1 UNCERTAINTIES IN THE MEASUREMENT OF MOBILE RADIO EQUIPMENT CHARACTERISTICS; SUB-PART 1: INTRODUCTION |
| EN 61000-4-20:2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES |
| CLC/TR 50481:2009 | Recommendations on filters for shielded enclosures |
| EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
| CISPR TR 16-3:2010+AMD1:2012+AMD2:2015 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: CISPR technical reports |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.