Name: EN 573-1:2004
Brand: CEN

Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system

Published date

11-03-2004

Publisher

Comite Europeen de Normalisation

Foreword
1 Scope
2 International registration procedure
3 Basis for European designation
4 Four-digit numerical system
  4.1 Alloy groups
  4.2 1xxx group
  4.3 2xxx to 8xxx groups
5 Registration rules for alloy modifications
6 Registration rules for national variations
Bibliography

This document specifies a European designation system of wrought aluminium and aluminium alloys, based on an international designation system, and the procedure to obtain such international designation.It is in accordance with the "Recommendation" dated December 15, 1970, as revised in March 2002, for an International Designation System for Wrought Aluminum and Wrought Aluminum Alloys issued by the Aluminum Association, Washington DC 20006, USA.This standard applies to wrought products and to ingots intended to be wrought.

Committee	CEN/TC 132
DocumentType	Standard
PublisherName	Comite Europeen de Normalisation
Status	Current

Standards	Relationship
NF EN 573-1 : 2005	Identical
PN EN 573-1 : 2006	Identical
NBN EN 573-1 : 2004	Identical
BS EN 573-1:2004	Identical
NEN EN 573-1 : 2005	Identical
NS EN 573-1 : 2ED 2004	Identical
I.S. EN 573-1:2004	Identical
UNI EN 573-1 : 2005	Identical
UNE-EN 573-1:2005	Identical
SN EN 573-1 : 2005	Identical
DIN EN 573-1:2005-02	Identical

PD CEN/TS 16811-3:2015	Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods
UNI EN 1090-3 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DD ENV 1999-1.1 : DRAFT DEC 2000	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 101: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
98/105109 DC : DRAFT JUNE 1998	PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY
DIN EN 1090-3:2008-09	EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
ONORM EN 1090-3 : 2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
EN 573-3:2013	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
I.S. EN 573-3:2013	ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
DIN EN 26:2015-08	Gas-fired instantaneous water heaters for the production of domestic hot water
BS EN 487:2009	Aluminium and aluminium alloys. Rolling ingots. Specifications
BS EN 1011-7:2004	Welding. Recommendations for welding of metallic materials Electron beam welding
I.S. EN 89:2015	GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
EN 12487:2007/AC:2008	CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
EN 1011-7:2004	Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
DIN EN 15502-2-1:2017-09	Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016)
CEN/TS 16811-3:2015	Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods
I.S. EN 1090-3:2008	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
PREN 1090-3 : DRAFT 2017	EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08	WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
PREN 16282-5 : DRAFT 2014	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING
11/30213830 DC : 0	BS ISO 6722-2 - ROAD VEHICLES - 60 V AND 600 V SINGLE-CORE CABLES - PART 2: DIMENSIONS TEST METHODS AND REQUIREMENTS FOR ALUMINIUM CONDUCTOR CABLES
17/30354713 DC : 0	BS ISO 19642-8 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 4: DIMENSIONS AND REQUIREMENTS FOR 30 V A.C. AND 60 V D.C. SINGLE CORE ALUMINIUM CONDUCTOR CABLES
BS EN 50465:2015	European product standard for combined heating power systems using gas fuel
I.S. EN 16914:2017	ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
BS EN 15502-2-1 : 2012	GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
I.S. EN 16282-5:2017	EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
ISO/TR 17671-4:2002	Welding Recommendations for welding of metallic materials Part 4: Arc welding of aluminium and aluminium alloys
I.S. EN 50465:2015	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
DIN EN 1011-7:2004-10	Welding - Recommendations for welding of metallic materials - Part 7: Electron beam welding
DIN EN 12487:2007-07	Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
DIN EN 89:2015-08	GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
BS EN 26:1998	Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
I.S. EN 486:2009	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS
DIN EN 573-4:2004-05	ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 4: FORMS OF PRODUCTS
I.S. EN 26:2015	GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
I.S. EN 12487:2007	CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
I.S. EN 487:2009	ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS
05/30133060 DC : 0	EN 1090-3 - EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
BS EN 16282-5:2017	Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air duct. Design and dimensioning
CEN ISO/TR 20172:2009	Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
DIN EN 15502-2-1:2013-01	GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
08/30186451 DC : DRAFT OCT 2008	BS EN 573-3 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
PD CEN ISO/TR 20172:2009	Welding. Grouping systems for materials. European materials
S.R. CEN ISO TR 20172:2009	WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
EN 1090-3:2008	Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
EN 50465 : 2015	GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
DIN EN 573-2:1994-12	ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 2: CHEMICAL SYMBOL BASED ON DESIGNATION SYSTEM
DIN EN 573-3:2013-12	ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
DIN EN 486:2009-11	Aluminium and aluminium alloys - Extrusion ingots - Specifications
BS EN 89:2015	Gas-fired storage water heaters for the production of domestic hot water
UNI EN 12487 : 2007	CORROSION PROTECTION OF METALS - RINSED AND NON-RINSED CHROMATE CONVERSION COATINGS ON ALUMINIUM AND ALUMINIUM ALLOYS
UNI EN 487 : 2009	ALUMINIUM AND ALUMINIUM ALLOYS - ROLLING INGOTS - SPECIFICATIONS
UNI EN 573-3 : 2013	ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS
EN 50465:2015	Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
EN 1011-4:2000/A1:2003	WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 4: ARC WELDING OF ALUMINIUM AND ALUMINIUM ALLOYS
UNI EN 486 : 2009	ALUMINIUM AND ALUMINIUM ALLOYS - EXTRUSION INGOTS - SPECIFICATIONS
11/30244204 DC : 0	BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING
DIN EN 16914 E : 2017	ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
14/30303753 DC : 0	BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING
PREN 485-2 : DRAFT 99	ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
I.S. EN 573-4:2004	ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - FORMS OF PRODUCTS
BS ISO 6722-2:2013	Road vehicles. 60 V and 600 V single-core cables Dimensions, test methods and requirements for aluminium conductor cables
17/30348949 DC : 0	BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
DIN EN 16914:2015-12 (Draft)	ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
I.S. ENV 1999-1-1:1998	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
ISO 6722-2:2013	Road vehicles — 60 V and 600 V single-core cables — Part 2: Dimensions, test methods and requirements for aluminium conductor cables
BS EN 12487:2007	Corrosion protection of metals. Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys
BS EN 573-4:2004	Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products
BS EN 573-2:1995	Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical symbol based designation system
UNE-EN 486:2010	Aluminium and aluminium alloys - Extrusion ingots - Specifications
UNE-EN 573-3:2014	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
UNE-EN 487:2010	Aluminium and aluminium alloys - Rolling ingots - Specifications
UNE-EN 16914:2017	Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions
BS EN 573-3:2013	Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products
UNE-EN 89:2016	Gas-fired storage water heaters for the production of domestic hot water
UNE-EN 26:2016	Gas-fired instantaneous water heaters for the production of domestic hot water
EN 486:2009	Aluminium and aluminium alloys - Extrusion ingots - Specifications
EN 89:2015	Gas-fired storage water heaters for the production of domestic hot water
EN 16914:2017	Aluminium and aluminium alloys - Hot-rolled armour plates in weldable aluminium alloy - Technical delivery conditions
EN 16282-5:2017	Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 5: Air duct; Design and dimensioning
EN 573-4:2004	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 4: Forms of products
EN 15502-2-1:2012+A1:2016	Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
EN 26:2015	Gas-fired instantaneous water heaters for the production of domestic hot water
EN 573-2:1994	Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 2: Chemical symbol based designation system
EN 487:2009	Aluminium and aluminium alloys - Rolling ingots - Specifications
ENV 1999-1-1 : 1998	EUROCODE 9: DESIGN OF ALUMINIUM STRUCTURES - PART 1-1: GENERAL RULES - GENERAL RULES AND RULES FOR BUILDINGS
15/30327154 DC : 0	BS EN 16914 - ALUMINIUM AND ALUMINIUM ALLOYS - HOT-ROLLED ARMOUR PLATES IN WELDABLE ALUMINIUM ALLOY - TECHNICAL DELIVERY CONDITIONS
17/30354719 DC : 0	BS ISO 19642-6 - ROAD VEHICLES - AUTOMOTIVE CABLES - PART 6: DIMENSIONS AND REQUIREMENTS FOR 600 V A.C. OR 900 V D.C., 1000 V A.C. OR 1500 V D.C. SINGLE CORE ALUMINIUM CONDUCTOR CABLES
05/30128384 DC : DRAFT JAN 2005	EN 546-2 - ALUMINIUM AND ALUMINIUM ALLOYS - FOIL - PART 2: MECHANICAL PROPERTIES
99/710776 DC : DRAFT JULY 1999	PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES
02/701811 DC : DRAFT FEB 2002	BS EN 1011-7 - WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 7: ELECTRON BEAM WELDING
BS EN 16914:2017	Aluminium and aluminium alloys. Hot-rolled armour plates in weldable aluminium alloy. Technical delivery conditions
S.R. CEN ISO/TR 20172:2021	Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
PD 6588:1996	Welding. Guidelines for a grouping system for welding purposes
S.R. CEN/TS 16811-3:2015	WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
I.S. EN 15502-2-1:2012	GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
I.S. CEN ISO TR 20172:2006	WELDING - GROUPING SYSTEMS FOR MATERIALS - EUROPEAN MATERIALS
ISO/TR 17671-7:2004	Welding Recommendations for welding of metallic materials Part 7: Electron beam welding
BS EN 1090-3:2008	Execution of steel structures and aluminium structures Technical requirements for aluminium structures
UNE-EN 1090-3:2011	Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
BS EN 486:2009	Aluminium and aluminium alloys. Extrusion ingots. Specifications
BS EN 1011-4:2000	Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys
ISO/TR 20172:2009	Welding Grouping systems for materials European materials
DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08	WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
DIN EN 487:2009-11	Aluminium and aluminium alloys - Rolling ingots - Specifications