• There are no items in your cart

EN 60068-2-31:2008

Current
Current

The latest, up-to-date edition.

ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS
Published date

09-12-2008

FOREWORD
1 Scope
2 Normative references
3 General description of test
4 Initial measurements
5 Testing
  5.1 Drop and topple
      5.1.1 Description
      5.1.2 Test Facility
      5.1.3 Testing procedures
  5.2 Free fall - Procedure 1
      5.2.1 Description
      5.2.2 Test Facility
      5.2.3 Test severity
      5.2.4 Testing procedures
  5.3 Free fall repeated - Procedure 2
      5.3.1 Description
      5.3.2 Test facility
      5.3.3 Test severity
      5.3.4 Testing procedure
6 Final measurements
7 Information to be included in the relevant specification
  7.1 Drop and topple test
  7.2 Free fall and free fall repeated tests
8 Information to be given in the test report
Annex A (normative) Test apparatus for repeated
        free fall test - Procedure 2
Annex B (informative) Selection of test severities
        for free fall tests - Guidance
Annex ZA (normative) Normative references to international
         publications with their corresponding European
         publications

IEC 60068-2-31:2008 deals with a test procedure for simulating the effects of rough handling shocks, primarily in equipment-type specimens, the effects of knocks, jolts and falls which may be received during repair work or rough handling in operational use.

Committee
SR 104
DevelopmentNote
Supersedes HD 323.2.31 (06/2005) Supersedes EN 60068-2-32. (09/2008)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

I.S. EN IEC 62828-1:2018 REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
CEI EN 60601-1-11 : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
17/30348447 DC : 0 BS EN 17067 - FORESTRY MACHINERY - SAFETY REQUIREMENTS ON RADIO REMOTE CONTROLS
BS EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
I.S. EN 12919:2000 WORKPLACE ATMOSPHERES - PUMPS FOR THE SAMPLING OF CHEMICAL AGENTS WITH A VOLUME FLOW RATE OF OVER 5 L/MIN - REQUIREMENTS AND TEST METHODS
12/30258455 DC : 0 FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
BS EN 62488-2:2017 Power line communication systems for power utility applications Analogue power line carrier terminals or APLC
BS EN 61481-1:2014 Live working. Phase comparators Capacitive type to be used for voltages exceeding 1 kV a.c.
BS EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality Generic specification
BS EN 62040-5-3:2017 Uninterruptible power systems (UPS) DC output UPS. Performance and test requirements
BS EN 60770-3:2014 Transmitters for use in industrial-process control systems Methods for performance evaluation of intelligent transmitters
CEI EN 60086-5 : 2012 PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
CEI EN 62586-1 : 2016 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
BS EN 60601-1-12:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
BS EN 60539-1:2016 Directly heated negative temperature coefficient thermistors Generic specification
BS EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
BS EN 60068-2-47:2005 Environmental testing Tests. Mounting of specimens for vibration, impact and similar dynamic tests
I.S. HD 60269-3:2010 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F (IEC 60269-3:2010 (MOD))
10/30218875 DC : 0 BS EN 50130-5:2010 - ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
BS EN 62387:2016 Radiation protection instrumentation. Passive integrating dosimetry systems for individual, workplace and environmental monitoring of photon and beta radiation
PREN 12405-3 : DRAFT 2013 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
CEI EN 61291-5-2 : 2005 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
DIN EN 12405-3:2016-04 Gas meters - Conversion devices - Part 3: Flow computer
DIN EN 12405-2:2012-10 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
UNE-EN 50467:2012 Railway applications - Rolling stock - Electrical connectors, requirements and test methods
UNE-EN 12405-1:2006 Gas meters - Conversion devices - Part 1: Volume conversion
I.S. EN 62745:2017 SAFETY OF MACHINERY - REQUIREMENTS FOR CABLELESS CONTROL SYSTEMS OF MACHINERY
I.S. EN 50637:2017 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS FOR CHILDREN
I.S. EN 61010-2-201:2013 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR CONTROL EQUIPMENT (IEC 61010-2-201:2013 (EQV))
BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
I.S. EN 50467:2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 12405-1 : 2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 62586-1:2017 POWER QUALITY MEASUREMENT IN POWER SUPPLY SYSTEMS - PART 1: POWER QUALITY INSTRUMENTS (PQI)
I.S. EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
BS EN 62040-3:2011 Uninterruptible power systems (UPS) Method of specifying the performance and test requirements
BS EN 60770-1:1999 Transmitters for use in industrial-process control systems Methods for performance evaluation
I.S. EN 60728-14:2014 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 14: OPTICAL TRANSMISSION SYSTEMS USING RFOG TECHNOLOGY
I.S. EN 62575-1:2016 RADIO FREQUENCY (RF) BULK ACOUSTIC WAVE (BAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 62387-1:2012 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR ENVIRONMENTAL AND PERSONAL MONITORING - PART 1: GENERAL CHARACTERISTICS AND PERFORMANCE REQUIREMENTS (IEC 62387-1:2007 (MOD))
UNI EN 12405-1 : 2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 62488-2:2017 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
BS EN 60086-4:2015 Primary batteries Safety of lithium batteries
NF EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
UNE-EN 60728-3:2012 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks
UNE-EN 60320-1:2016 Appliance couplers for household and similar general purposes - Part 1: General requirements
I.S. EN 60546-1:2010 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
EN 61535:2009/A1:2013 INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009/A1:2012)
BS EN 13718-1:2014 Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances
BS EN 61535 : 2009 INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS
BS EN 61010-2-201:2013 Safety requirements for electrical equipment for measurement, control and laboratory use Particular requirements for control equipment
EN 50178:1997 Electronic equipment for use in power installations
EN 60770-1:2011 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
EN 60601-2-52:2010/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-52: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS
DIN EN 14154-2:2011-06 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
EN 12405-2:2012 Gas meters - Conversion devices - Part 2: Energy conversion
EN 61243-3:2014/AC:2015 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology
EN 12919:1999 Workplace atmospheres - Pumps for the sampling of chemical agents with a volume flow rate of over 5 l/min - Requirements and test methods
EN 50130-5:2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
EN 12405 : 2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
EN 60086-5:2016 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
EN 62040-5-3:2017 Uninterruptible power systems (UPS) - Part 5-3: DC output UPS - Performance and test requirements
EN 62387-1:2012 Radiation protection instrumentation - Passive integrating dosimetry systems for environmental and personal monitoring - Part 1: General characteristics and performance requirements
EN 62137-1-3:2009 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
EN 61131-2:2007 Programmable controllers - Part 2: Equipment requirements and tests
EN 62586-1:2017 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality - Part 1: Generic specification
EN 60068-2-47:2005 Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests
EN 62387 : 2016 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION (IEC 62387:2012, MODIFIED)
EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013)
EN 61481-1:2014 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
EN 61298-3:2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities
EN 61291-5-2:2017 Optical amplifiers - Part 5-2: Qualification specifications - Reliability qualification for optical fibre amplifiers
PREN 12405-1 : DRAFT 2017 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
UNE-EN 61481-1:2015 Live working - Phase comparators - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.
I.S. EN 12405:2002 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
BS EN 60086-5:2016 Primary batteries Safety of batteries with aqueous electrolyte
BS EN 62745:2017 Safety of machinery. Requirements for cableless control systems of machinery
NF EN 50130-5 : 2011 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
BS EN 61481-2:2014 Live working. Phase comparators Resistive type to be used for voltages from 1 kV to 36 kV a.c.
BS EN 62586-1:2017 Power quality measurement in power supply systems Power quality instruments (PQI)
BS EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality Generic specification
BS EN 60068-2-27:2009 Environmental testing Tests. Test Ea and guidance. Shock
BS EN 80601-2-30 : 2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
CEI EN 50467 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
BS EN 45502-2-3:2010 Active implantable medical devices Particular requirements for cochlear and auditory brainstem implant systems
CEI EN 62488-2 : 1ED 2018 POWER LINE COMMUNICATION SYSTEMS FOR POWER UTILITY APPLICATIONS - PART 2: ANALOGUE POWER LINE CARRIER TERMINALS OR APLC
NF EN 12405-1 : 2005 + A2 2010 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 60335-1:2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 50178:1998 Electronic equipment for use in power installations
CEI EN 61526 : 2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS HP(10) AND HP(0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS
UNE-EN 12405-3:2016 Gas meters - Conversion devices - Part 3: Flow computer
BS EN 61243-3:2014 Live working. Voltage detectors Two-pole low-voltage type
EN 62884-1:2017 Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement
I.S. EN 62040-5-3:2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 61131-2:2007 PROGRAMMABLE CONTROLLERS - PART 2: EQUIPMENT REQUIREMENTS AND TESTS
CEI EN 60728-6 : 2012 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 6: OPTICAL EQUIPMENT
I.S. EN 61481-2:2014 LIVE WORKING - PHASE COMPARATORS - PART 2: RESISTIVE TYPE TO BE USED FOR VOLTAGES FROM 1 KV TO 36 KV A.C.
I.S. EN 60728-3:2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
I.S. EN 62040-3:2011 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
BS EN 14154-3 : 2005 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
BS EN 61131-2:2007 Programmable controllers Equipment requirements and tests
EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
DIN EN 12405:2003-10 GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES
UNI EN 13718-1 : 2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
CEI EN 62040-3 : 2015 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 3: METHOD OF SPECIFYING THE PERFORMANCE AND TEST REQUIREMENTS
13/30289289 DC : 0 BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
CEI EN 60728-3 : 2011 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS
UNE-EN 62586-1:2014 Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
UNI EN 12405-2 : 2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
95/101341 DC : DRAFT FEB 1995 PREN 1823 - EMERGENCY ROADSIDE TELEPHONES
I.S. EN 61291-5-2:2017 OPTICAL AMPLIFIERS - PART 5-2: QUALIFICATION SPECIFICATIONS - RELIABILITY QUALIFICATION FOR OPTICAL FIBRE AMPLIFIERS
CEI EN 60546-1 : 2011 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
I.S. EN 60086-5:2016 PRIMARY BATTERIES - PART 5: SAFETY OF BATTERIES WITH AQUEOUS ELECTROLYTE
CEI EN 62745 : 1ED 2017 SAFETY OF MACHINERY - REQUIREMENTS FOR CABLELESS CONTROL SYSTEMS OF MACHINERY
I.S. EN 61514-2:2013 INDUSTRIAL PROCESS CONTROL SYSTEMS - PART 2: METHODS OF EVALUATING THE PERFORMANCE OF INTELLIGENT VALVE POSITIONERS WITH PNEUMATIC OUTPUTS MOUNTED ON AN ACTUATOR VALVE ASSEMBLY (IEC 61514-2:2013 (EQV))
04/30124466 DC : DRAFT OCT 2004 EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
BS EN 60728-5:2008 Cable networks for television signals, sound signals and interactive services Headend equipment
CEI EN 62884-1 : 1ED 2018 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
EN 62040-3:2011 Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements
I.S. EN 12405-2:2012 GAS METERS - CONVERSION DEVICES - PART 2: ENERGY CONVERSION
BS EN 61526:2013 Radiation protection instrumentation. Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations. Direct reading personal dose equivalent meters
CEI EN 60770-1 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
I.S. EN 60846-1:2014 RADIATION PROTECTION INSTRUMENTATION - AMBIENT AND/OR DIRECTIONAL DOSE EQUIVALENT (RATE) METERS AND/OR MONITORS FOR BETA, X AND GAMMA RADIATION - PART 1: PORTABLE WORKPLACE AND ENVIRONMENTAL METERS AND MONITORS
I.S. EN 12405-3:2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
I.S. EN 62752:2016&AC:2019-03 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
I.S. EN 80601-2-30:2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
I.S. EN 60601-1-12:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
BS EN 60335-1 : 2012 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
UNE-EN 61481-2:2015 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
I.S. EN 62884-1:2017 MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT
EN 12405-1:2005+A2:2010 Gas meters - Conversion devices - Part 1: Volume conversion
DIN EN 13718-1:2014-12 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
BS EN 14154-2 : 2005 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
UNE-EN 61535:2010 Installation couplers intended for permanent connection in fixed installations
UNE-EN 14154-3:2005 Water meters - Part 3 : Test methods and equipment
UNE-EN 14154-2:2005 Water meters - Part 2 : Installation and conditions of use
EN 60601-1-12:2015 Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
EN 60086-4:2015 Primary batteries - Part 4: Safety of lithium batteries
EN 60601-2-52:2010/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-52: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS
UNI EN 14154-3 : 2011 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
UNI EN 14154-2 : 2011 WATER METERS - PART 2: INSTALLATION AND CONDITIONS OF USE
UNI CEI EN 45502-2-3 : 2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
I.S. EN 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
BS EN 62604-1:2015 Surface acoustic wave (SAW) and bulk acoustic wave (BAW) duplexers of assessed quality Generic specification
CEI EN 61514 : 2002 INDUSTRIAL-PROCESS CONTROL SYSTEMS - METHODS OF EVALUATING THE PERFORMANCE OF VALVE POSITIONERS WITH PNEUMATIC OUTPUTS
I.S. EN 61535:2009 INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009 (EQV))
BS EN 12405-3:2015 Gas meters. Conversion devices Flow computer
BS EN 61514:2002 Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs
BS EN 60728-3:2011 Cable networks for television signals, sound signals and interactive services Active wideband equipment for cable networks
BS EN 62387-1:2012 Radiation protection instrumentation. Passive integrating dosimetry systems for environmental and personal monitoring General characteristics and performance requirements
UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
BS HD 60269-3 : 2010 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
BS EN 12405-2:2012 Gas meters. Conversion devices Energy conversion
PREN 50130-5 : DRAFT 2010 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
DIN EN 12405-3 E : 2016 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
BS EN 50130-5:2011 Alarm systems Environmental test methods
UNE-EN 60086-5:2011 Primary batteries - Part 5: Safety of batteries with aqueous electrolyte
BS EN 61298-3:2008 Process measurement and control devices. General methods and procedures for evaluating performance Tests for the effects of influence quantities
CEI EN 62040-5-3 : 1ED 2017 UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-3: DC OUTPUT UPS - PERFORMANCE AND TEST REQUIREMENTS
I.S. EN 60770-1:2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
EN 62488-2:2017 Power line communication systems for power utility applications - Part 2: Analogue power line carrier terminals or APLC
PREN 17067 : DRAFT 2016 FORESTRY MACHINERY - SAFETY REQUIREMENTS ON RADIO REMOTE CONTROLS
I.S. EN 60601-1-11:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
I.S. EN 61243-3:2014 LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE
EN IEC 62828-1:2018 Reference conditions and procedures for testing industrial and process measurement transmitters - Part 1: General procedures for all types of transmitters
CEI 32-13 : 2013 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
I.S. EN 60601-2-52:2010 MEDICAL ELECTRICAL EQUIPMENT - PART 2-52: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF MEDICAL BEDS (IEC 60601-2-52:2009)
I.S. EN 62137-1-3:2009 SURFACE MOUNTING TECHNOLOGY - ENVIRONMENTAL AND ENDURANCE TEST METHODS FOR SURFACE MOUNT SOLDER JOINT - PART 1-3: CYCLIC DROP TEST
I.S. EN 12405-1:2005 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
EN 60539-1:2016/AC:2017-09 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION (IEC 60539-1:2016/COR1:2017)
EN 61010-2-201:2013/AC:2013 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR CONTROL EQUIPMENT (IEC 61010-2-201:2013)
BS EN 12919:1999 Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods
95/214868 DC : 0 PREN 50178 - ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS
EN 62752:2016 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
EN 13718-1:2014 Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
I.S. EN 13718-1:2014 MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES
UNE-EN 45502-2-3:2010 Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
BS EN 12405:2002 Gas meters. Gas-volume electronic conversion devices
UNE-EN 60335-1:2012 Household and similar electrical appliances - Safety - Part 1: General requirements
UNE-EN 61243-3:2015 Live working - Voltage detectors - Part 3: Two-pole low-voltage type
EN 60320-1:2015/AC:2016 APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60320-1:2015/COR1:2016)
EN 60862-1:2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1: Generic specification
EN 61526:2013 Radiation protection instrumentation - Measurement of personal dose equivalents Hp(10) and Hp(0,07) for X, gamma, neutron and beta radiations - Direct reading personal dose equivalent meters
EN 14154-2:2005+A2:2011 Water meters - Part 2: Installation and conditions of use
EN 45502-2-3:2010 Active implantable medical devices - Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems
EN 14154-3:2005+A2:2011 Water meters - Part 3: Test methods and equipment
BS EN 60846-1:2014 Radiation protection instrumentation. Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation Portable workplace and environmental meters and monitors
BS EN 60728-14:2014 Cable networks for television signals, sound signals and interactive services Optical transmission systems using RFoG technology
BS EN 60601-1-11:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
BS EN 62137-1-3:2009 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint Cyclic drop test
BS EN 50637:2017 Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds for children
BS EN 60546-1:2010 Controllers with analogue signals for use in industrial-process control systems Methods of evaluating the performance
CEI EN 62752 : 1ED 2017 IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD)
BS EN 50467:2011 Railway applications. Rolling stock. Electrical connectors, requirements and test methods
UNE-EN 50130-5:2011 Alarm systems - Part 5: Environmental test methods
BS EN 61514-2:2013 Industrial process control systems Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs mounted on an actuator valve assembly
BS EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services Optical equipment
BS 88-3(2010) : 2010 COR 2014 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
16/30316718 DC : 0 BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
DIN EN 60546-1:2011-06 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS OF EVALUATING THE PERFORMANCE
EN 62745:2017 Safety of machinery - Requirements for cableless control systems of machinery
UNE-EN 12405-2:2013 Gas meters - Conversion devices - Part 2: Energy conversion
I.S. EN 62604-1:2015 SURFACE ACOUSTIC WAVE (SAW) AND BULK ACOUSTIC WAVE (BAW) DUPLEXERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
CEI EN 50130-5 : 2012 ALARM SYSTEMS - PART 5: ENVIRONMENTAL TEST METHODS
CEI EN 60539-1 : 2009 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
EN 60601-1-11:2015 Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
I.S. EN IEC 60728-3:2018 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 3: ACTIVE WIDEBAND EQUIPMENT FOR CABLE NETWORKS (TA 5)
I.S. EN 61298-3:2008 PROCESS MEASUREMENT AND CONTROL DEVICES - GENERAL METHODS AND PROCEDURES FOR EVALUATING PERFORMANCE - PART 3: TESTS FOR THE EFFECTS OF INFLUENCE QUANTITIES
I.S. EN 61481-1:2014 LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
I.S. EN 60862-1:2015 SURFACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY - PART 1: GENERIC SPECIFICATION
I.S. EN 45502-2-3:2010 ACTIVE IMPLANTABLE MEDICAL DEVICES - PART 2-3: PARTICULAR REQUIREMENTS FOR COCHLEAR AND AUDITORY BRAINSTEM IMPLANT SYSTEMS
I.S. EN 62387:2016 RADIATION PROTECTION INSTRUMENTATION - PASSIVE INTEGRATING DOSIMETRY SYSTEMS FOR INDIVIDUAL, WORKPLACE AND ENVIRONMENTAL MONITORING OF PHOTON AND BETA RADIATION
EN IEC 60728-3:2018 Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
17/30356731 DC : 0 BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
UNE-EN 62752:2017 In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD)
I.S. EN 60728-5:2016 CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 5: HEADEND EQUIPMENT
I.S. EN 61526:2013 RADIATION PROTECTION INSTRUMENTATION - MEASUREMENT OF PERSONAL DOSE EQUIVALENTS H[P](10) AND H[P](0,07) FOR X, GAMMA, NEUTRON AND BETA RADIATIONS - DIRECT READING PERSONAL DOSE EQUIVALENT METERS (IEC 61526:2010 (MOD))
I.S. EN 60539-1:2016 DIRECTLY HEATED NEGATIVE TEMPERATURE COEFFICIENT THERMISTORS - PART 1: GENERIC SPECIFICATION
DIN EN 12405-1:2011-04 GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
DIN EN 14154-3:2011-06 WATER METERS - PART 3: TEST METHODS AND EQUIPMENT
EN 60770-3:2014 Transmitters for use in industrial-process control systems - Part 3: Methods for performance evaluation of intelligent transmitters
EN 60846-1:2014 Radiation protection instrumentation - Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation - Part 1: Portable workplace and environmental meters and monitors
EN 61514:2002 Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
EN 61481-2:2014 Live working - Phase comparators - Part 2: Resistive type to be used for voltages from 1 kV to 36 kV a.c.
EN 80601-2-30:2010/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS (IEC 80601-2-30:2009/A1:2013)
EN 50637:2017 Medical electrical equipment - Particular requirements for the basic safety and essential performance of medical beds for children
EN 12405-3 : 2015 GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
EN 60728-6:2011 Cable networks for television signals, sound signals and interactive services - Part 6: Optical equipment
HD 60269-3:2010/A1:2013 LOW-VOLTAGE FUSES - PART 3: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO F
EN 60546-1:2010 Controllers with analogue signals for use in industrial-process control systems - Part 1: Methods of evaluating the performance
EN 62575-1:2016 Radio frequency (RF) bulk acoustic wave (BAW) filters of assessed quality - Part 1: Generic specification
EN 60728-5:2016 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment
EN 50467 : 2011 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS
EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock

IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
EN 24180-2 : 1992 COMPLETE, FILLED TRANSPORT PACKAGES - GENERAL RULES FOR THE COMPILATION OF PERFORMANCE TEST SCHEDULES - QUANTITATIVE DATA
EN 60068-2-55:2013 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
IEC 60068-2-55:2013 Environmental testing - Part 2-55: Tests - Test Ee and guidance - Loose cargo testing including bounce
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)
ISO 4180-2:1980 Complete, filled transport packages — General rules for the compilation of performance test schedules — Part 2: Quantitative data

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.