EN 60512-28-100:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Connectors for electronic equipment - Tests and measurements - Part 28-100: Signal integrity tests up to 1 000 MHz on IEC 60603-7 and IEC 61076-3 series connectors - Tests 28a to 28g
Superseded date
01-04-2020
Published date
04-05-2013
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions and acronyms
4 Overall test arrangement
5 Connector measurement up to 1000 MHz
Annex A (informative) - Example derivation of mixed mode
parameters using the modal decomposition technique
Annex B (informative) - Test pins - Dimensions and references
Bibliography
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
IEC 60512-28-100:2013 specifies the test methods for transmission performance for IEC 60603-7 and IEC 61076-3 series connectors up to 1 000 MHz. It is also suitable for testing lower frequency connectors, however the test methodology specified in the detailed specification for any given connector remains the reference conformance test for that connector. The test methods provided here are: - insertion loss, - return loss, - near-end crosstalk (NEXT), - far-end crosstalk (FEXT), - transverse conversion loss (TCL) and - transverse conversion transfer loss (TCTL). For the transfer impedance (ZT) test, see IEC 60512-26-100. For the coupling attenuation, see IEC 62153-4-12. Keywords: Signal Integrity, Near-end crosstalk, Far-end crosstalk.
| Committee |
CLC/SR 48B
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| UNE-EN 60512-28-100:2013 | Identical |
| NF EN IEC 60512-28-100:2019 | Identical |
| SN EN 60512-28-100:2013 | Identical |
| NBN EN 60512-28-100 : 2013 | Identical |
| I.S. EN 60512-28-100:2013 | Identical |
| NF EN 60512-28-100 : 2013 | Identical |
| BS EN 60512-28-100:2013 | Identical |
| PN EN 60512-28-100 : 2013 | Identical |
| NEN EN IEC 60512-28-100 : 2013 | Identical |
| VDE 0687-512-28-100 : 2013 | Identical |
| CEI EN 60512-28-100 : 2014 | Identical |
| DIN EN 60512-28-100 : 2013 | Identical |
| OVE/ONORM EN 60512-28-100 : 2013 | Identical |
| BS EN IEC 61000-4-20:2022 | Identical |
| BS EN 50289-1-9:2017 | Communication cables. Specifications for test methods Electrical test methods. Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| EN 60603-7-81:2016/AC:2017-07 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-81: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ (IEC 60603-7-81:2015/COR 1:2017) |
| 16/30342125 DC : 0 | BS EN 50289-1-9 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| DIN EN 50289-1-9 : 2002 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| VDE 0819-289-1-9 : 2018 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| BS EN 61076-3-110:2016 | Connectors for electronic equipment. Product requirements Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
| I.S. EN 60603-7-81:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-81: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
| I.S. EN 50289-1-9:2017 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| I.S. EN 61076-3-104:2017 | CONNECTORS FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-104: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED FREE AND FIXED CONNECTORS FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 2000 MHZ |
| EN 50289-1-9:2017 | Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| I.S. EN 61076-3-110:2016 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ |
| PREN 50289-1-9 : DRAFT 2016 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 1-9: ELECTRICAL TEST METHODS - UNBALANCE ATTENUATION (TRANSVERSE CONVERSION LOSS TCL TRANSVERSE CONVERSION TRANSFER LOSS TCTL) |
| UNE-EN 50289-1-9:2017 | Communication cables - Specifications for test methods - Part 1-9: Electrical test methods - Unbalance attenuation (transverse conversion loss TCL transverse conversion transfer loss TCTL) |
| BS EN 60603-7-81:2016 | Connectors for electronic equipment Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 2 000 MHz |
| CEI EN 61076-3-110 : 2013 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-110: DETAIL SPECIFICATION FOR FREE AND FIXED CONNECTORS FOR DATA TRANSMISSION WITH FREQUENCIES UP TO 3000 MHZ |
| BS EN 61076-3-104:2017 | Connectors for electrical and electronic equipment. Product requirements Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| EN 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| EN 61076-3-110:2016 | Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| IEC 62153-4-12:2009 | Metallic communication cable test methods - Part 4-12: Electromagnetic compatibility (EMC) - Coupling attenuation or screening attenuation of connecting hardware - Absorbing clamp method |
| IEC 61076-3-110:2016 | Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
| EN 60512-26-100:2008/A1:2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| EN 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| EN 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| IEC 60512-26-100:2008+AMD1:2011 CSV | Connectors for electronic equipment - Tests and measurements - Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g |
| EN 61169-16:2007 | Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristic impedance 50 ohms (75 ohms) (type N) |
| IEC 61169-16:2006 | Radio-frequency connectors - Part 16: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling - Characteristics impedance 50 ohms (75 ohms) (type N) |
| IEC 61156-6:2010+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Work area wiring -Sectional specification |
| EN 61076-3-110:2016 | Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz |
| IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| IEC 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.