• There are no items in your cart

EN 60584-1:2013

Current
Current

The latest, up-to-date edition.

Thermocouples - Part 1: EMF specifications and tolerances
Published date

12-13-2013

FOREWORD
INTRODUCTION
1 Scope
2 Terms and definitions
3 Thermocouple designations
4 EMF - Temperature reference functions
5 Thermocouple tolerances
6 Thermoelectric values at the fixed points of
  the ITS-90
Annex A (informative) - Tables for EMF as
        a function of temperature
Annex B (informative) - Inverse polynomial
        functions
Annex C (informative) - Guidance on the
        selection of thermocouples
Bibliography

IEC 60584-1:2013 specifies reference functions and tolerances for letter-designated thermocouples (Types R, S, B, J, T, E, K, N, C and A). Temperatures are expressed in degrees Celsius based on the International Temperature Scale of 1990, ITS-90 (symbol t90), and the EMF (symbol E) is in microvolts. The reference functions are polynomials which express the EMF, E in V, as a function of temperature t90 in °C with the thermocouple reference junctions at 0 °C. Values of EMF at intervals of 1 °C are tabulated in Annex A. This third edition cancels and replaces the second edition published in 1995 and constitutes a technical revision. It includes the following changes: - IEC 60584-1:1995 and IEC 60584-2:1982 have been merged; - the standard is now explicitly based on the reference polynomials which express thermocouple EMF as functions of temperature. The tables derived from the polynomials are given in Annex A; - inverse polynomials expressing temperature as functions of EMF are given in Annex B, but inverse tables are not given; - the range of the polynomial relating the EMF of Type K thermocouples is restricted to 1 300 °C; - values of the Seebeck coefficients are given at intervals of 10 °C; - thermoelectric data (EMF and Seebeck coefficients) are given at the fixed points of the ITS-90; - some guidance is given in Annex C regarding the upper temperature limits and environmental conditions of use for each thermocouple type.

Committee
CLC/TC 65X
DevelopmentNote
Supersedes HD 446.1. (05/2001) Supersedes EN 60584-2. (12/2013)
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current
Supersedes

DIN EN 13381-9:2015-09 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS
17/30348655 DC : 0 BS EN ISO 20238 - CONVEYOR BELTS - DRUM FRICTION TESTING
UNE-EN 50200:2016 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS EN 60695-11-3:2012 Fire hazard testing Test flames. 500 W flames. Apparatus and confirmational test methods
I.S. EN 1892:2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES
BS EN 60068-3-7:2002 Environmental testing. Guidance Measurements in temperature chambers for tests A and B (with load)
DD CEN/TS 15866:2009 Advanced technical ceramics. Ceramic composites. Determination of the thermal diffusivity of ceramic fibres
I.S. EN 15157:2006 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FATIGUE PROPERTIES AT CONSTANT AMPLITUDE
UNI EN 820-4 : 2009 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
17/30363953 DC : 0 BS EN 416 - GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
I.S. EN 12101-2:2017 SMOKE AND HEAT CONTROL SYSTEMS - PART 2: NATURAL SMOKE AND HEAT EXHAUST VENTILATORS
I.S. EN 1159-1:2003 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMO-PHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY
BS EN 820-4:2009 Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of flexural creep deformation at elevated temperatures
I.S. EN 50399:2011 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
CEI UNI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
11/30238482 DC : 0 BS EN 1458-1 - DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
BS EN 61515:1996 Mineral insulated thermocouple cables and thermocouples
DIN EN 13381-9 E : 2015 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS
BS EN 60068-3-6:2002 Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers
06/30139635 DC : 0 EN 777-2 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E, SAFETY
11/30249223 DC : 0 BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
09/30171916 DC : DRAFT JAN 2009 BS EN ISO 9239-1 - REACTION TO FIRE TESTS FOR FLOORINGS - PART 1: DETERMINATION OF THE BURNING BEHAVIOUR USING A RADIANT HEAT SOURCE
DD ENV 12789:1998 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
PREN 1554 : DRAFT 2011 CONVEYOR BELTS - DRUM FRICTION TESTING
CEI EN 60068-3-7 : 2002 ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TEST A AND B (WITH LOAD)
BS EN 50446:2006 Straight thermocouple assembly with metal or ceramic protection tube and accessories
UNI EN 820-5 : 2009 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES
BS EN 50570:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers
CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
BS EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
I.S. EN 50570:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
17/30363956 DC : 0 BS EN 419 - GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
S.R. CEN/TR 16988:2016 ESTIMATION OF UNCERTAINTY IN THE SINGLE BURNING ITEM TEST
CEI EN 61515 : 1997 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES
BS EN 60531:2000 Household electric thermal storage room heaters. Methods for measuring performance
17/30332894 DC : 0 BS EN 17082 - DOMESTIC AND NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW
17/30350914 DC : 0 BS EN 1047-2 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
CEI EN 60584-3 : 2009 THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEMS
I.S. EN 60695-2-10:2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013 (EQV))
UNI EN 15659 : 2009 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS
S.R. CEN/TS 15658:2007 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE HOT END METHOD
XP CEN/TS 45545-2 : 2009 XP RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
NF EN 1366-9 : 2009 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
I.S. EN 50200:2015 METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS
EN 285:2015 Sterilization - Steam sterilizers - Large sterilizers
I.S. EN 1047-1:2005 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS
DIN EN 416-1:2009-09 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
DIN EN 777-1:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
DIN EN 12881-1 E : 2015 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
DIN EN 777-3:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
DIN EN 777-2:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
DIN EN 13235:2007-01 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR
BS EN 993-9:1997 Methods of test for dense shaped refractory products Determination of creep in compression
BS EN 12599:2012 Ventilation for buildings. Test procedures and measurement methods to hand over air conditioning and ventilation systems
DIN EN 15335 E : 2007 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF ELASTIC PROPERTIES BY RESONANT BEAM METHOD UP TO 2000 DEGREE C
BS EN 61558-1 : 2005 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
BS EN 12789:2002 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure. Determination of flexural strength
BS EN 12952-15:2003 Water-tube boilers and auxiliary installations Acceptance tests
BS EN 821-3:2005 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties Determination of specific heat capacity
BS EN 12101-2:2017 Smoke and heat control systems Natural smoke and heat exhaust ventilators
BS EN 821-2:1997 Advanced technical ceramics. Monolithic ceramics. Thermo-physical properties Determination of thermal diffusivity by the laser flash (or heat pulse) method
BS EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use Safety
BS EN 15157:2006 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of fatigue properties at constant amplitude
BS EN 15335:2007 Advanced technical ceramics. Ceramic composites. Determination of elastic properties by resonant beam method up to 2000°C
BS EN 12291:2003 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of compression properties
BS EN 1458-1:2011 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW Safety
BS EN 12244-1:1998 Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW Safety
EN 12291:2003 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties
DIN EN 821-3:2005-04 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 3: Determination of specific heat capacity
EN 12669:2000 DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING
EN 60269-1:2007/A2:2014 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014)
EN 1159-1:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion
EN 1159-2:2003 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity
EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
EN 1047-1:2005 Secure storage units - Classification and methods of test for resistance to fire - Part 1: Data cabinets and diskette inserts
EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
EN 12290:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties
CEN/TS 1007-7:2006 Advanced technical ceramics - Ceramic composites. Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
EN 30-1-1:2008+A3:2013 Domestic cooking appliances burning gas - Part 1-1: Safety - General
EN 1007-7:2010 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
EN 1007-6:2007 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
EN 60695-11-4 : 2011 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011)
CEN/TS 15866:2009 Advanced technical ceramics - Ceramic composites - Determination of the thermal diffusivity of ceramic fibres
EN 12599:2012 Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems
I.S. EN 1159-3:2003 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
EN 60068-3-6:2002 Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
CEN/TS 15658:2007 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method
EN 12244-1:1998 DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW - PART 1: SAFETY
EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
EN 62460:2008 Temperature - Electromotive force (EMF) tables for pure-element thermocouple combinations
EN 60584-3:2008 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
EN 820-5:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures
EN 12881-1:2014 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
EN 13235:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour
EN 12101-2:2017 Smoke and heat control systems - Part 2: Natural smoke and heat exhaust ventilators
EN 12789:2002 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength
EN 50570:2013/A1:2018 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
PREN 416 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT TUBE HEATERS AND RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
DIN EN 15181:2015-03 (Draft) MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS
CEI EN 50571 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
09/30181168 DC : DRAFT JAN 2009 BS EN 1047-2 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
I.S. EN 1159-2:2003 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY
I.S. EN 1894:2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF SHEAR STRENGTH BY COMPRESSION LOADING OF NOTCHED SPECIMENS
CEI EN 60695-11-3 : 2013 FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS
I.S. EN 1007-6:2007 ADVANCED TECHNICAL CERAMIC - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE
PREN 17175 : DRAFT 2017 GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
CEI EN 60531 : 2001 HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS METHODS FOR MEASURING PERFORMANCE
06/30139629 DC : 0 EN 777-1 - MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D, SAFETY
I.S. HD 605:2008 ELECTRIC CABLES - ADDITIONAL TEST METHODS
I.S. EN 45545-2:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
BS EN 61804-2:2007 Function blocks (FB) for process control Specification of FB concept and electronic device description language (EDDL)
HD 605 S2:2008/corrigendum:2010 ELECTRIC CABLES - ADDITIONAL TEST METHODS
02/122341 DC : DRAFT MAY 2002 PREN 993-19:2002 - METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 19: DETERMINATION OF THERMAL EXPANSION
I.S. EN 61804-2:2007 FUNCTION BLOCKS (FB) FOR PROCESS CONTROL - PART 2: SPECIFICATION OF FB CONCEPT
BS EN 13381-9:2015 Test methods for determining the contribution to the fire resistance of structural members Applied fire protection systems to steel beams with web openings
PREN 12599 : DRAFT 2010 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
DD ENV 12923-2:2001 Advanced technical ceramics. Monolithic ceramics Oxidation test
XP CEN/TS 15658 : 2007 XP ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE UNDER NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR - HOT END METHOD
BS EN 60269-1 : 2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
DIN EN 45545-2:2016-02 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
I.S. EN 61515:2016 MINERAL INSULATED METAL-SHEATHED THERMOCOUPLE CABLES AND THERMOCOUPLES
UNE-EN 50193-1:2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
I.S. EN 60531:2000 HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE
CEI EN 61804-2 : 2008 FUNCTION BLOCKS (FB) FOR PROCESS CONTROL - PART 2: SPECIFICATION OF FB CONCEPT
I.S. EN 60068-3-7:2002 ENVIRONMENTAL TESTING - PART 3-7: SUPPORTING DOCUMENTATION AND GUIDANCE - MEASUREMENTS IN TEMPERATURE CHAMBERS FOR TESTS A AND B (WITH LOAD)
ISO 20238:2018 Conveyor belts — Drum friction testing
I.S. EN 1007-7:2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
PREN 30-1-1 : DRAFT 2017 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
I.S. EN 60695-11-2:2017 FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
CEI EN 50570 : 2014 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
I.S. EN 60335-2-6:2015 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-6: PARTICULAR REQUIREMENTS FOR STATIONARY COOKING RANGES, HOBS, OVENS AND SIMILAR APPLIANCES
UNE-EN 50399:2012 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
UNE-EN 15181:2017 Measuring method of the energy consumption of gas fired ovens
ASTM E 2714 : 2013 : REDLINE Standard Test Method for Creep-Fatigue Testing
NF EN 820-4 : 2009 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
UNI EN 1366-9 : 2008 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
S.R. CEN/TS 45545-2:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
DIN EN 1007-6:2008-02 Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature
DIN EN 10319-2:2007-01 Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models
DIN EN 12788:2005-11 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
DIN EN 1020:2010-05 NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
DIN EN 1319:2010-06 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
DIN EN 1554:2012-10 CONVEYOR BELTS - DRUM FRICTION TESTING
DIN EN 993-19:2004-08 Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method
DIN EN 15758 E : 2010 CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS
DIN EN 1159-3:2008-06 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity (includes Corrigendum AC:2008)
DIN EN 12881-1:2015-10 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
DIN EN 12952-15 E : 2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 15: ACCEPTANCE TESTS
DIN EN 1159-1 E : 2007 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 1: DETERMINATION OF THERMAL EXPANSION
DIN EN 15758:2010-12 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and of the surfaces of objects
BS EN 1007-6:2007 Advanced technical ceramic. Ceramic composites. Methods of test for reinforcements Determination of tensile properties of filaments at high temperature
BS EN 1554:2012 Conveyor belts. Drum friction testing
BS EN 820-3:2004 Advanced technical ceramics. Monolithic ceramics. Thermomechanical properties Determination of resistance to thermal shock by water quenching
UNE-EN 1458-1:2012 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety
BS EN 993-8:1997 Methods of test for dense shaped refractory products Determination of refractoriness-under-load
UNE-EN 12881-1:2014 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests
BS EN 12881-1:2014 Conveyor belts. Fire simulation flammability testing Propane burner tests
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
EN 1366-1:2014 Fire resistance tests for service installations - Part 1: Ventilation ducts
I.S. EN 1366-1:2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
I.S. EN 30-1-1:2008 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
I.S. EN 12244-1:1998 DIRECT GAS-FIRED WASHING MACHINES, OF NOMINAL HEAT INPUT NOT EXCEEDING 20 KW - PART 1: SAFETY
DIN EN 1893:2005-07 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPER TIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES
DIN EN 12290:2005-09 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF COMPRESSION PROPERTIES
I.S. EN 12669:2000 DIRECT GAS-FIRED HOT AIR BLOWERS FOR USE IN GREENHOUSES AND SUPPLEMENTARY NON-DOMESTIC SPACE HEATING
DIN EN 1363-1:2012-10 FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS
I.S. EN 12599:2012 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
DIN EN 1366-1:2014-12 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
I.S. EN 12881-1:2014 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
EN 1159-3:2003/AC:2008 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
I.S. EN 12881-2:2005 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST
I.S. EN 1458-1:2011 DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
DIN EN 1892:2005-07 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF TENSILE PROPERTIES
DIN EN 12291:2003-10 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF COMPRESSION PROPERTIES
DIN EN 1894:2005-07 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens; German version EN 1894:2005
VDE 0349-2 : 1998 METHOD OF TEST FOR THE HYDROLYTIC STABILITY - MOULDED THERMOSETS
VDI 3460 Blatt 1:2014-02 Emission control - Thermal waste treatment - Fundamentals
BS 1902-4.5(2000) : 2000 METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - DETERMINATION OF MODULUS OF RUPTURE AT ELEVATED TEMPERATURES
DIN EN 61234-2 : 1998 ELECTRICAL INSULATING MATERIALS - METHOD OF TEST FOR THE HYDROLYTIC STABILITY - PART 2: MOULDED THERMOSETS
NF EN 1159-1 : 2003 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 1: DETERMINATION OF THERMAL EXPANSION
UNI CEI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
CEI EN 50362 : 2003 METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS
CEI EN 60068-3-5 : 2002 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
I.S. EN 285:2015 STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS
BS EN 60695-11-4:2011 Fire hazard testing Test flames. 50 W flame. Apparatus and confirmational test method
I.S. EN 12788:2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH
10/30216687 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
I.S. EN 12290:2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE DETERMINATION OF COMPRESSION PROPERTIES
DIN EN 1366-9:2008-08 Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
BS EN 16733:2016 Reaction to fire tests for building products. Determination of a building product\'s propensity to undergo continuous smouldering
PD CEN/TR 16988:2016 Estimation of uncertainty in the single burning item test
CEI EN 60068-3-6 : 2002 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
I.S. EN 820-2:2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMO-MECHANICAL PROPERTIES - PART 2: DETERMINATION OF SELF-LOADED DEFORMATION
14/30287830 DC : 0 BS EN 16733 - BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCTS PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
BS EN 62460:2008 Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations
BS EN 60584-3:2008 Thermocouples Extension and compensating cables. Tolerances and identification system
17/30301540 DC : 0 BS ISO 19629 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - THERMOPHYSICAL PROPERTIES OF CERAMIC COMPOSITES - DETERMINATION OF UNIDIMENSIONAL THERMAL DIFFUSIVITY BY FLASH METHOD
DIN EN 1007-7:2010-12 Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
UNE-EN 16733:2016 Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering
DIN EN 16733:2016-07 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
12/30259188 DC : 0 BS EN 12881-1 - CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
PREN 1047-1 : DRAFT 2017 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS
DIN EN 16442 E : 2015 CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES
BS EN 50193-1:2013 Electric instantaneous water heaters General requirements
BS EN 820-5:2009 Advanced technical ceramics. Thermomechanical properties of monolithic ceramics Determination of elastic moduli at elevated temperatures
BS EN 50571:2013 Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines
12/30249755 DC : DRAFT JULY 2012 BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - GENERAL REQUIREMENTS
I.S. EN 50571:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
15/30325369 DC : 0 BS EN 484 - SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE
17/30350911 DC : 0 BS EN 1047-1 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS
10/30235574 DC : 0 BS EN 12599 - VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
07/30162155 DC : 0 EN 15659 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS
UNE-EN 13381-4:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
16/30333511 DC : 0 BS EN 50193-1 - ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
04/30116565 DC : DRAFT JUL 2004 EN 12881-1 - CONVEYOR BELTS - FIRE TEST - PART 1: TWO METRE PROPANE GALLERY
09/30210744 DC : 0 BS EN 15365 - ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD
CEI EN 60695-11-2 : 2014 FIRE HAZARD TESTING - PART 11-2: TEST FLAMES - 1 KW NOMINAL PRE-MIXED FLAME - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
PREN 50570 : DRAFT 2011 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
NF EN 1007-7 : 2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
PREN 1047-2 : DRAFT 2017 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
BS EN 50399:2011 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
I.S. EN 10319-2:2006 METALLIC MATERIALS - TENSILE STRESS RELAXATION TESTING - PART 2: PROCEDURE FOR BOLTED JOINT MODELS
UNI EN 1047-2 : 2013 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
NORSOK I 001 : 2010 FIELD INSTRUMENTATION
NF EN 50399 : 2012 AMD 1 2016 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
CEI EN 62460 : 2009 TEMPERATURE - ELECTROMOTIVE FORCE (EMF) TABLES FOR PURE-ELEMENT THERMOCOUPLE COMBINATIONS
I.S. EN 16442:2015 CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES
I.S. CEN TS 15365:2006 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC FIBRES AT HIGH TEMPERATURE IN A NON-REACTIVE ENVIRONMENT - DETERMINATION OF CREEP BEHAVIOUR BY THE COLD END METHOD
I.S. EN 61189-3:2008 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 3: TEST METHODS FOR INTERCONNECTION STRUCTURES (PRINTED BOARDS)
I.S. CEN TS 820-5:2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES
DIN EN 12881-2 E : 2009 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST
DIN EN 285:2016-05 Sterilization - Steam sterilizers - Large sterilizers
BS EN 1892:2005 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of tensile properties
DIN EN 12881-2:2009-10 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test (includes Amendment A1:2009)
BS EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
UNI EN 1366-1 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
I.S. EN 777-4:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
EN 13823:2010+A1:2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
I.S. EN 777-2:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
I.S. EN 416-1:2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
I.S. EN 777-3:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
I.S. EN 1319:2009 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN-ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
EN 60068-3-7:2002 Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A and B (with load)
ONORM EN 1047-1 : 2006 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS
I.S. EN 13823:2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
I.S. EN 621:2009 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
UNI EN 13823 : 2014 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
I.S. EN 1020:2009 NON-DOMESTIC FORCED CONVECTION GAS-FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
I.S. EN 777-1:2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
EN 821-2:1997 Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method
UNI EN 12599 : 2012 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
UNI EN 416-1 : 2009 SINGLE BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATERS FOR NON-DOMESTIC USE - PART 1: SAFETY
UNI EN 12881-1 : 2014 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 1: PROPANE BURNER TESTS
UNI EN 1458-1 : 2012 DOMESTIC DIRECT GAS-FIRED TUMBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
UNI EN 777-4 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
UNI EN 12881-2 : 2008 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST
EN 820-4:2009 Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures
UNI EN 1020 : 2009 NON-DOMESTIC FORCED CONVECTION GAS- FIRED AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW INCORPORATING A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR OR COMBUSTION PRODUCTS
EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
UNI EN 1319 : 2010 DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING, WITH FAN- ASSISTED BURNERS NOT EXCEEDING A NET HEAT INPUT OF 70 KW
UNI EN 621 : 2010 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
UNI EN 777-1 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D - SAFETY
UNI EN 1554 : 2012 CONVEYOR BELTS - DRUM FRICTION TESTING
EN 50362:2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
UNI EN 777-2 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY
UNI EN 777-3 : 2009 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F - SAFETY
11/30250552 DC : 0 BS EN 1554 - CONVEYOR BELTS - DRUM FRICTION TESTING
04/30125773 DC : DRAFT NOV 2004 EN 12923-1 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS
BS EN 1007-7:2010 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
UNI EN 1159-3 : 2003 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - DETERMINATION OF SPECIFIC HEAT CAPACITY
DIN EN 15181 E : 2009 MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS
PREN 484 : DRAFT 2015 SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - INDEPENDENT STOVES, INCLUDING THOSE INCORPORATING A GRILL FOR OUTDOOR USE
I.S. CEN TS 1007-7:2006 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES. METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
PREN 17180 : DRAFT 2017 STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING
PREN 15659 : DRAFT 2017 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS
BS EN 13381-6:2012 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete filled hollow steel columns
BS EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes
PREN 50193-1 : DRAFT 2016 ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
DD ENV 12923-1:1998 Advanced technical ceramics. Monolithic ceramics General practice for undertaking corrosion tests
UNI EN 13381-4 : 2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
I.S. EN 13235:2006 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR
BS EN 1366-9:2008 Fire resistance tests for service installations Single compartment smoke extraction ducts
DIN EN 60584-3:2008-08 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system (IEC 60584-3:2007); German version EN 60584-3:2008
I.S. EN 820-3:2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING
DIN 43735:2011-06 PROCESS CONTROL TECHNOLOGY - ELECTRICAL TEMPERATURE SENSORS - REPLACEABLE INSERTS FOR RTDS AND THERMOCOUPLES
12/30261347 DC : 0 BS EN 50582 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED OPTICAL FIBRE CABLES FOR USE IN EMERGENCY CIRCUITS (DIAMETER LESS THAN OR EQUAL TO 20 MM)
BS EN 61234-2:1998 Method of test for hydrolytic stability of electrical insulating materials Moulded thermosets
I.S. EN 1047-2:2009 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
98/201085 DC : DRAFT MARCH 1998 PREN 50296 - HOUSEHOLD ELECTRIC THERMAL STORAGE ROOM HEATERS - METHODS FOR MEASURING PERFORMANCE
DKD-R 5-6 : 2008
PREN 419 : DRAFT 2017 GAS-FIRED OVERHEAD LUMINOUS RADIANT HEATERS FOR NONDOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
PREN 50200 : DRAFT 2013 METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS
UNI EN 1007-7 : 2010 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
BS EN 50200:2015 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
DIN EN 13381-4:2013-08 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
I.S. EN 60695-11-4:2011 FIRE HAZARD TESTING - PART 11-4: TEST FLAMES - 50 W FLAME - APPARATUS AND CONFIRMATIONAL TEST METHOD (IEC 60695-11-4:2011)
BS EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members Applied passive protection products to steel members
UNI CEI CEN/TS 45545-2 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
03/308231 DC : 0 EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS
I.S. EN 1366-9:2008 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 9: SINGLE COMPARTMENT SMOKE EXTRACTION DUCTS
DIN EN 820-4:2013-01 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
UNI EN 1007-6 : 2008 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT HIGH TEMPERATURE
DD ENV 13235:2000 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour
DD ENV 820-4:2002 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of flexural creep deformation at elevated temperatures
S.R. CEN/TS 15866:2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES
DIN EN 16442:2015-05 CONTROLLED ENVIRONMENT STORAGE CABINET FOR PROCESSED THERMOLABILE ENDOSCOPES
UNE-EN 60695-11-4:2012 Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method
DD CEN/TS 45545-2:2009 Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components
DIN EN 15659 E : 2009 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS
I.S. EN 60068-3-6:2002 ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
I.S. EN 60068-3-5:2002 ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS
I.S. EN 60584-3:2008 THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM
I.S. EN 15659:2009 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS
UNE-EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes
UNE-EN 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
I.S. EN 50362:2003 METHOD OF TEST FOR RESISTANCE TO FIRE OF LARGER UNPROTECTED POWER AND CONTROL CABLES FOR USE IN EMERGENCY CIRCUITS
I.S. EN 60695-11-3:2012 FIRE HAZARD TESTING - PART 11-3: TEST FLAMES - 500 W FLAMES - APPARATUS AND CONFIRMATIONAL TEST METHODS (IEC 60695-11-3:2012 (EQV))
17/30363959 DC : 0 BS EN 17175 - GAS-FIRED OVERHEAD RADIANT STRIP HEATERS AND MULTI-BURNER CONTINUOUS RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - SAFETY AND ENERGY EFFICIENCY
BS EN 1047-2 : 2009 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
ECA 10-08 : OCT 2011 CALIBRATION OF THERMOCOUPLES
EN 1047-2:2009+A1:2013 Secure storage units - Classification and methods of test for resistance to fire - Part 2: Data rooms and data container
ISO/TR 15658:2009 Fire resistance tests Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation
DIN EN 1047-2:2013-05 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 2: DATA ROOMS AND DATA CONTAINER
I.S. EN 62460:2008 TEMPERATURE - ELECTROMOTIVE FORCE (EMF) TABLES FOR PURE-ELEMENT THERMOCOUPLE COMBINATIONS
DIN EN 13823:2015-02 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
BS EN 13823:2010+A1:2014 Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
DIN EN 12599:2013-01 VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS
DIN EN 1047-1:2006-01 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - PART 1: DATA CABINETS AND DISKETTE INSERTS
UNE-EN 1554:2012 Conveyor belts - Drum friction testing
BS EN 13235:2006 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of creep behaviour
BS EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
BS EN 12669:2000 Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic space heating
BS EN 12788:2005 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength
BS EN 1893:2005 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure. Determination of tensile properties
DIN EN 1159-3 E : 2008 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
BS EN 993-19:2004 Methods of test for dense shaped refractory products Determination of thermal expansion by a differential method
BS EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System E. Safety
BS EN 1366-1:2014 Fire resistance tests for service installations Ventilation ducts
BS EN 1159-3:2003 Advanced technical ceramics. Ceramic composites, thermophysical properties Determination of specific heat capacity
UNI EN 1363-1 : 2012 FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS
BS EN 820-2:2003 Advanced technical ceramics. Methods of testing monolithic ceramics. Thermo-mechanical properties Determination of self-loaded deformation
BS EN 62282-4-101:2014 Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks
UNE-EN 1366-1:2016 Fire resistance tests for service installations - Part 1: Ventilation ducts
BS EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System H. Safety
BS EN 12923-1:2006 Advanced technical ceramics. Monolithic ceramics General practice for undertaking corrosion tests
BS EN 1363-1:2012 Fire resistance tests General requirements
BS EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System D. Safety
UNE-EN 1020:2010 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
BS EN 285:2015 Sterilization. Steam sterilizers. Large sterilizers
BS EN 10319-2:2006 Metallic materials. Tensile stress relaxation testing Procedure for bolted joint models
UNE-EN 12101-2:2004 Smoke and heat control systems - Part 2: Specification for natural smoke and heat exhaust ventilators
UNE-EN 15659:2010 Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
UNE-EN 30-1-1:2009 Domestic cooking appliances burning gas - Part 1-1: Safety - General
UNE-EN 50571:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
EN 15181:2017 Measuring method of the energy consumption of gas fired ovens
DIN EN 12952-15:2004-01 Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003
BS EN 15758:2010 Conservation of cultural property. Procedures and instruments for measuring temperatures of the air and the surfaces of objects
UNE-EN 15758:2011 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
UNE-EN 50570:2014 Household and similar electrical appliances - Safety - Particular requirements for commercial electric tumble dryers
BS EN 15158:2006 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of fatigue properties at constant amplitude
DIN EN 1159-1:2007-11 Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion (includes Corrigendum AC:2007)
DIN EN 1159-2:2003-12 Advanced technical ceramics - Ceramic composites; Thermophysical properties - Part 2: Determination of thermal diffusivity
EN 61515:2016 Mineral insulated metal-sheathed thermocouple cables and thermocouples
EN 1893:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties
EN 1458-1:2011 Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not exceeding 6 kW - Part 1: Safety
ENV 12788 : 1998 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF FLEXURAL STRENGTH
EN 820-2:2003 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation
ENV 12789 : 1998 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERE PRESSURE - DETERMINATION OF FLEXURAL STRENGTH
EN 15335:2007 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C
EN 621:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products
EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety
EN 15158:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude
OVE/ONORM EN 60584-3 : 2008 THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM
EN 993-19 : 2004 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 19: DETERMINATION OF THERMAL EXPANSION BY A DIFFERENTIAL METHOD
EN 1554:2012 Conveyor belts - Drum friction testing
EN 993-7 : 1998 METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 7: DETERMINATION OF MODULUS OF RUPTURE AT ELEVATED TEMPERATURES
EN 993-8 : 1997 METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - PART 8: DETERMINATION OF REFRACTORINESS-UNDER-LOAD
EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety
EN 1366-9:2008 Fire resistance tests for service installations - Part 9: Single compartment smoke extraction ducts
EN 15659:2009 Secure storage units - Classification and methods of test for resistance to fire - Light fire storage units
EN 15157:2006 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude
EN 1892:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties
EN 15758:2010 Conservation of Cultural Property - Procedures and instruments for measuring temperatures of the air and the surfaces of objects
EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety
ENV 12923-1 : 1997 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS
EN 1894:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens
EN 993-9:1997 Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression
EN 16733:2016 Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering
EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety
EN 821-3 : 2005 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
EN 777-4:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety
ENV 13235 : 1998 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER INERT ATMOSPHERE - DETERMINATION OF CREEP BEHAVIOUR
EN 820-3 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING
EN 16442:2015 Controlled environment storage cabinet for processed thermolabile endoscopes
DIN EN 50446:2007-04 STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
13/30282376 DC : 0 BS EN 50200 - METHOD OF TEST FOR RESISTANCE TO FIRE OF UNPROTECTED SMALL CABLES FOR USE IN EMERGENCY CIRCUITS
I.S. EN 993-8:1998 METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS - PART 8: DETERMINATION OF REFRACTORINESS-UNDER-LOAD
I.S. EN 12789:2002 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE UNDER AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF FLEXURAL STRENGTH
BS EN 60695-11-2:2017 Fire hazard testing Test flames. 1 kW pre-mixed flame. Apparatus, confirmatory test arrangement and guidance
I.S. EN 821-3:2005 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY
I.S. EN 12923-1:2006 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 1: GENERAL PRACTICE FOR UNDERTAKING CORROSION TESTS
UNE-EN 60695-11-3:2013 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
I.S. EN 1893:2005 ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT HIGH TEMPERATURE IN AIR AT ATMOSPHERIC PRESSURE - DETERMINATION OF TENSILE PROPERTIES
08/30185906 DC : 0 BS EN 820-4 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
DD CEN/TS 15658:2007 Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature under non-reactive environment. Determination of creep behaviour by the hot end method
DIN EN 16733 E : 2016 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
I.S. EN 1554:2012 CONVEYOR BELTS - DRUM FRICTION TESTING
BS EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for interconnection structures (printed boards)
09/30210248 DC : 0 BS EN 1007-7 - ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 7: DETERMINATION OF THE DISTRIBUTION OF TENSILE STRENGTH AND OF TENSILE STRAIN TO FAILURE OF FILAMENTS WITHIN A MULTIFILAMENT TOW AT HIGH TEMPERATURE
DD ENV 12788:1998 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of flexural strength
DIN EN 820-5:2009-10 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES
UNE-EN 13381-6:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns
16/30304294 DC : 0 BS EN 16989 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - FIRE BEHAVIOUR TEST FOR A COMPLETE SEAT
BS EN 15181:2017 Measuring method of the energy consumption of gas fired ovens
04/30123974 DC : DRAFT OCT 2004 EN 50446 - STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
BS EN 60695-2-10:2013 Fire hazard testing Glowing/hot-wire based test methods. Glow-wire apparatus and common test procedure
BS EN 60335-2-6:2015 Household and similar electrical appliances. Safety Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
EN 50193-1:2016 Electric instantaneous water heaters - Methods for measuring the Performance - Part 1: General requirements
02/123950 DC : DRAFT OCT 2002 BS EN 14470-1 - FIRE SAFETY STORAGE CABINETS - PART 1: SAFETY STORAGE CABINETS FOR FLAMMABLE LIQUIDS
EN 60335-2-6:2015 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
CEI EN 50446 : 2007 STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
I.S. EN 820-4:2009 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 4: DETERMINATION OF FLEXURAL CREEP DEFORMATION AT ELEVATED TEMPERATURES
06/30139641 DC : 0 EN 777-3 - MULTI-BURNER GAS-FORED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON DOMESTIC USE - PART 3: SYSTEM F - SAFETY
BS EN 15659:2009 Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units
08/30185915 DC : 0 BS EN 820-5 - ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES
UNE-EN 45545-2:2013 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
DIN EN 15659:2009-12 SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS
UNI EN 15758 : 2010 CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING TEMPERATURES OF THE AIR AND THE SURFACES OF OBJECTS
UNI EN 13381-6 : 2012 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 6: APPLIED PROTECTION TO CONCRETE FILLED HOLLOW STEEL COLUMNS
I.S. EN 60269-1:2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
I.S. ENV 1007-6:2002 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENTS - PART 6: DETERMINATION OF TENSILE PROPERTIES OF FILAMENT AT HIGH TEMPERATURE
I.S. EN 820-5:2009 ADVANCED TECHNICAL CERAMICS - THERMOMECHANICAL PROPERTIES OF MONOLITHIC CERAMICS - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES
I.S. EN 50193-1:2016 ELECTRIC INSTANTANEOUS WATER HEATERS - METHODS FOR MEASURING THE PERFORMANCE - PART 1: GENERAL REQUIREMENTS
I.S. EN 13381-4:2013 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PASSIVE PROTECTION TO STEEL MEMBERS
I.S. EN 13381-9:2015 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 9: APPLIED FIRE PROTECTION SYSTEMS TO STEEL BEAMS WITH WEB OPENINGS
I.S. EN 16733:2016 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - DETERMINATION OF A BUILDING PRODUCT'S PROPENSITY TO UNDERGO CONTINUOUS SMOULDERING
I.S. EN 50446:2006 STRAIGHT THERMOCOUPLE ASSEMBLY WITH METAL OR CERAMIC PROTECTION TUBE AND ACCESSORIES
BS EN 50362:2003 Method of test for resistance to fire of larger unprotected power and control cables for use in emergency circuits
17/30350908 DC : 0 BS EN 15659 - SECURE STORAGE UNITS - CLASSIFICATION AND METHODS OF TEST FOR RESISTANCE TO FIRE - LIGHT FIRE STORAGE UNITS
UNI CEN/TS 15866 : 2009 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - DETERMINATION OF THE THERMAL DIFFUSIVITY OF CERAMIC FIBRES
UNE-EN 13381-9:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
I.S. EN 15181:2017 MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS
BS EN 13823 : 2010 REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
EN 1363-1:2012 Fire resistance tests - Part 1: General Requirements
DIN EN 777-4:2009-09 MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H - SAFETY
EN 50571:2013/A1:2018 Household and similar electrical appliances - Safety - Particular requirements for commercial electric washing machines
DIN EN 12923-1:2007-03 Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests
DIN EN 30-1-1:2013-06 Domestic cooking appliances burning gas - Part 1-1: Safety - General (includes Amendment 1:2013)
I.S. EN 1363-1:2012 FIRE RESISTANCE TESTS - PART 1: GENERAL REQUIREMENTS
UNE-EN 285:2016 Sterilization - Steam sterilizers - Large sterilizers
BS EN 1047-1:2005 Secure storage units. Classification and methods of test for resistance to fire Data cabinets and diskette inserts
BS EN 993-7:2000 Methods of test for dense shaped refractory products Determination of modulus of rupture at elevated temperatures
DIN EN 1159-2 E : 2004 ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - THERMOPHYSICAL PROPERTIES - PART 2: DETERMINATION OF THERMAL DIFFUSIVITY
BS EN 1319:2009 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW
BS EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use System F. Safety
BS EN 30-1-1 : 2008 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
BS EN 12290:2005 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of compression properties
BS EN 12881-2 : 2005 CONVEYOR BELTS - FIRE SIMULATION FLAMMABILITY TESTING - PART 2: LARGE SCALE FIRE TEST
BS EN 1159-1:2003 Advanced technical ceramics. Ceramic composites. Thermophysical properties Determination of thermal expansion
BS EN 1159-2:2003 Advanced technical ceramics. Ceramic composites. Thermophysical properties Determination of thermal diffusivity
BS EN 1894:2005 Advanced technical ceramics. Mechanical properties of ceramic composites at high temperature under inert atmosphere. Determination of shear strength by compression loading of notched specimens
DIN EN 15335:2007-08 Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2000 ?C
EN 12788:2005 Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength
EN 50446:2006 Straight thermocouple assembly with metal or ceramic protection tube and accessories
EN 12952-15:2003 Water-tube boilers and auxiliary installations - Part 15: Acceptance tests
DIN EN 621:2010-04 NON-DOMESTIC GAS-FIRED FORCED CONVECTION AIR HEATERS FOR SPACE HEATING NOT EXCEEDING A NET HEAT INPUT OF 300 KW, WITHOUT A FAN TO ASSIST TRANSPORTATION OF COMBUSTION AIR AND/OR COMBUSTION PRODUCTS
EN 1020:2009 Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products
EN 61804-2:2007 Function blocks (FB) for process control - Part 2: Specification of FB concept
EN 60695-11-3:2012 Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational test methods
DIN EN 820-3:2004-11 Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching
EN 60068-3-5:2002 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers
DIN EN 15181:2009-09 MEASURING METHOD OF THE ENERGY CONSUMPTION OF GAS FIRED OVENS
CEN/TS 15365:2006 Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
CEN/TS 45545-2:2009 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
EN 10319-2:2006 Metallic materials - Tensile stress relaxation testing - Part 2: Procedure for bolted joint models
DIN EN 1458-1:2012-02 DOMESTIC DIRECT GAS-FIRED TUBLE DRYERS OF TYPES B22D AND B23D, OF NOMINAL HEAT INPUT NOT EXCEEDING 6 KW - PART 1: SAFETY
EN 12923-1:2006 Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests
EN 50399 : 2011 AMD 1 2016 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
EN 60531:2000 Household electric thermal storage room heaters - Methods for measuring performance
EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
EN 13381-4:2013 Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members
UNI EN 30-1-1 : 2013 DOMESTIC COOKING APPLIANCES BURNING GAS - PART 1-1: SAFETY - GENERAL
EN 13381-9:2015 Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings
CEN/TS 820-5 : 2004 ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 5: DETERMINATION OF ELASTIC MODULI AT ELEVATED TEMPERATURES
EN 60695-11-2:2017 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance
EN 61189-3:2008 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards)
DIN EN 820-2:2003-07 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 2: DETERMINATION OF SELF-LOADED DEFORMATION
EN 50200:2015 Method of test for resistance to fire of unprotected small cables for use in emergency circuits
UNE-EN 13823:2012 Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
UNE-EN 60335-2-6:2015 Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
BS 88-1(2007) : 2007 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS

IEC 60584-3:2007 Thermocouples - Part 3: Extension and compensating cables - Tolerances and identification system
IEC 61515:2016 Mineral insulated metal-sheathed thermocouple cables and thermocouples

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.