• There are no items in your cart

EN 61076-3-106 : 2006

Current
Current

The latest, up-to-date edition.

CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-106: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE
Published date

12-15-2006

FOREWORD
1 General data
  1.1 Scope
  1.2 Normative references
  1.3 IEC type designation
2 Terminology
3 Dimensional information
  3.1 Common features
  3.2 General
  3.3 Contact arrangement of all connector types
  3.4 IP65 and IP67 sealing
  3.5 Industrial IEC 60603-7 variant 01 - bayonet coupling
  3.6 Industrial IEC 60603-7 variant 02 - snap-in coupling
  3.7 Industrial IEC 60603-7 variant 03 - threaded coupling
  3.8 Industrial IEC 60603-7 variant 04 - snap-in coupling
  3.9 Industrial IEC 60603-7 variant 05 - locking lever coupling
  3.10 Industrial IEC 60603-7 variant 06 - snap-in coupling
  3.11 Industrial IEC 60603-7 variant 07 - locking lever coupling
  3.12 Industrial IEC 60603-7 variant 08 - threaded coupling
  3.13 Industrial IEC 60603-7 variant 09 - quarter turn coupling
  3.14 Industrial IEC 60603-7 variant 10 - Pulse lock coupling
  3.15 Termination and mounting information
  3.16 Mounting information for variant 01, fixed connector
  3.17 Mounting information for variant 02, fixed connector
  3.18 Mounting information for variant 03, fixed connector
  3.19 Mounting information for variant 04, fixed connector
  3.20 Mounting information for variant 05, fixed connector
  3.21 Mounting information for variant 06, fixed connector
  3.22 Mounting information for variant 07, fixed connector
  3.23 Mounting information for variant 08, fixed connector
  3.24 Mounting information for variant 09, fixed connector
  3.25 Mounting information for variant 10, fixed connector
4 Gauges - Connectors for the IEC 60603-7 interface
5 Characteristics
  5.1 Climatic category
  5.2 Electrical
  5.3 Transmission characteristics
  5.4 Mechanical
6 Test schedule
  6.1 General
  6.2 Test procedures and measuring methods
  6.3 Preconditioning
  6.4 Wiring and mounting of specimens
  6.5 Arrangement for contact resistance test:
  6.6 Arrangement for dynamic stress tests (test phase AP2)
  6.7 Basic (minimum) test schedule
  6.8 Full test schedule
Annex ZA (normative) Normative references to international
         publications with their corresponding European publications

Covers protective housings for upgrading existing 8-way shielded and unshielded connectors utilizing the interface described in the IEC 60603-7 series to IP65 and IP67 ratings according to IEC 60529, for use in industrial environments.

Committee
SR 48B
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

CEI EN 61754-24-21 : 2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06
CEI EN 61754-20-100 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 20-100: INTERFACE STANDARD FOR LC CONNECTORS WITH PROTECTIVE HOUSINGS RELATED TO IEC 61076-3-106
BS EN 61754-20-100:2012 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Interface standard for LC connectors with protective housings related to IEC 61076-3-106
I.S. EN 50173-4:2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES
EN 61754-24-21 : 2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06
EN 50173-6:2013 Information technology - Generic cabling systems - Part 6: Distributed building services
12/30185217 DC : 0 BS EN 50173-6 - INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 6: DISTRIBUTED BUILDING SERVICES
I.S. EN 61754-24-21:2009 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24-21: TYPE SC-RJ CONNECTORS WITH PROTECTIVE HOUSINGS BASED ON IEC 61076-3-106, VARIANT 06
I.S. EN 50173-2:2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 2: OFFICE PREMISES
I.S. EN 61754-20-100:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 20-100: INTERFACE STANDARD FOR LC CONNECTORS WITH PROTECTIVE HOUSINGS RELATED TO IEC 61076-3-106 (IEC 61754-20-100:2012 (EQV))
I.S. EN 50173-3:2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES
NF EN 50173-4 : 2010 AMD 2 2013 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES
I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
PREN 50173-6 : DRAFT 2012 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 6: DISTRIBUTED BUILDING SERVICES
BS EN 50516-1-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3
CEI EN 50516-1-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
NF EN 50173-2 : 2010 AMD 1 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 2: OFFICE PREMISES
BS EN 50173-2 : 2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 2: OFFICE PREMISES
EN 50173-5 : 2007 AMD 2 2012 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES
EN 50173-4 : 2007 AMD 2 2012 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES
I.S. EN 50516-1-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
NF EN 50173-5 : 2010 AMD 2 2013 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTERS
BS EN 50173-3 : 2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES
BS EN 61754-24-11:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-117
I.S. EN 50173-5:2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES
BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
BS EN 50173-6:2013 Information technology. Generic cabling systems Distributed building services
BS EN 50173-5 : 2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 5: DATA CENTRES
EN 50173-3 : 2007 COR 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 3: INDUSTRIAL PREMISES
BS EN 61754-24-21:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
I.S. EN 50173-6:2013 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 6: DISTRIBUTED BUILDING SERVICES
BS EN 61754-24:2010 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces Type SC-RJ connector family
BS EN 50173-4 : 2007 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 4: HOMES
I.S. EN 61754-24:2010 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 24: TYPE SC-RJ CONNECTOR FAMILY
EN 50516-1-1:2011/AC:2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
EN 61754-24-11:2009 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24-11: Type SC-RJ connectors with protective housings based on IEC 61076-3-117
EN 61754-24:2010 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24: Type SC-RJ connector family
EN 61754-20-100:2012 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20-100: Interface standard for LC connectors with protective housings related to IEC 61076-3-106

IEC 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
EN 60512-1-100:2012 Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
EN 61076-1:2006 Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 61156-2:2010 Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60512-1-100:2012 Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
IEC 61156-4:2009 Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification
IEC 61156-3:2008 Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification
EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60050-581:2008 International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.