• There are no items in your cart

EN 61169-8:2007

Current
Current

The latest, up-to-date edition.

Radio-frequency connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristic impedance 50 ohms (type BNC)
Published date

04-11-2007

FOREWORD
1 Scope
2 Normative references
3 IEC type designation
4 Interface dimensions
  4.1 Dimensions - General purpose connectors
5 Mechanical gauges and standard test connectors
  5.1 Mechanical gauges
  5.2 Standard test connectors
6 Outline dimensions
7 Quality assessment procedures
  7.1 General
  7.2 Ratings and characteristics
  7.3 Test schedule and inspection requirements
  7.4 Procedures
8 Instructions for preparation of detail specifications
  8.1 General
  8.2 Identification of the Detail specification
  8.3 Identification of the component
  8.4 Performance
  8.5 Marking, ordering information and related matters
  8.6 Selection of tests, test conditions and severities
  8.7 Blank detail specification pro-forma for type BNC
      connector
Annex A (normative) - Information for interface dimensions
         of 75 ohms characteristic impedance connector with
         unspecified reflection factor
Annex ZA (normative) - Normative references to international
         publications with their corresponding European
         publications
Bibliography

It is a sectional specification (SS), provides information and rules for the preparation of detail specifications (DS) for RF coaxial connectors which may preferably be used with RF cables 60096 IEC 50-3 of IEC 60096-2. These connector patterns are for low power, quick connect/disconnect applications using a bayonet type coupling mechanism and are commonly known as type 'BNC'. It constitutes a technical revision. It differs from IEC 60169-8 primarily in that it contains a new Clause 7: Quality assessment procedures and a new Clause 8: Instructions for preparation of detail specifications. Futhermore this IEC 61169-8 refers to IEC 61169-1 whereas IEC 60169-8 referred to IEC 60169-1.

Committee
CLC/SR 46F
DocumentType
Standard
PublisherName
European Committee for Standards - Electrical
Status
Current

BS EN 61169-8:2007 Radio-frequency connectors Sectional specification. RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock. Characteristic impedance 50 ohms (type BNC)
CEI EN 60966-2-3 : 2010 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
I.S. EN 60958-4-4:2016 DIGITAL AUDIO INTERFACE - PART 4-4: PROFESSIONAL APPLICATIONS - PHYSICAL AND ELECTRICAL PARAMETERS
EN 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
BS EN 60966-2-3:2009 Radio frequency and coaxial cable assemblies Detail specification for flexible coaxial cable assemblies. Frequency range 0 MHz to 1000 MHz, IEC 61169-8 connectors
BS EN 60728-5:2008 Cable networks for television signals, sound signals and interactive services Headend equipment
I.S. EN 60966-2-3:2009 RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES - PART 2-3: DETAIL SPECIFICATION FOR FLEXIBLE COAXIAL CABLE ASSEMBLIES - FREQUENCY RANGE 0 MHZ TO 1000 MHZ, IEC 61169-8 CONNECTORS
I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
I.S. EN 61158-2:2014 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
CEI EN 60958-4-4 : 2017 DIGITAL AUDIO INTERFACE - PART 4-4: PROFESSIONAL APPLICATIONS - PHYSICAL AND ELECTRICAL PARAMETERS
DIN EN 61158-2:2015-02 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014)
BS EN 61158-2:2014 Industrial communication networks. Fieldbus specifications Physical layer specification and service definition
BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
EN 60966-2-3:2009 Radio frequency and coaxial cable assemblies - Part 2-3: Detail specification for flexible coaxial cable assemblies - Frequency range 0 MHz to 1 000 MHz, IEC 61169-8 connectors
EN 60958-4-4:2016 Digital audio interface - Part 4-4: Professional applications - Physical and electrical parameters
EN 60728-5:2016 Cable networks for television signals, sound signals and interactive services - Part 5: Headend equipment
EN 62676-3:2015 Video surveillance systems for use in security applications - Part 3: Analog and digital video interfaces

HD 323.2.20 : 200S3 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-2-20:2008 Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
IEC 60096-2:1961 Radio-frequency cables - Part 2: Relevant cable specifications
IEC 60068-2-13:1983 Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
IEC 60068-2-11:1981 Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist
EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60068-2-78:2013 Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state
EN 60068-2-13:1999 Environmental testing - Part 2: Tests - Test M: Low air pressure
EN 60068-2-11:1999 Environmental testing - Part 2: Tests - Test Ka: Salt mist
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
EN 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test N: Change of temperature
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.