EN ISO 10365:1995
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Adhesives - Designation of main failure patterns (ISO 10365:1992)
Superseded date
02-21-2022
Published date
06-21-1995
Publisher
Foreword
1 Scope
2 Normative references
3 Definitions
4 Application
Specifies the designations and illustrates, through diagrams, their respective appearances. It applies to all mechanical tests performed on a bonded assembly, regardless of the nature of the adherends and adhesive which make up the assembly.
| Committee |
CEN/TC 193
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| BS EN ISO 10365:1995 | Identical |
| PN EN ISO 10365 : 1998 | Identical |
| SN EN ISO 10365 : 1995 | Identical |
| NS EN ISO 10365 : 1ED 1995 | Identical |
| NF EN ISO 10365 : 1995 | Identical |
| NBN EN ISO 10365 : 1995 | Identical |
| ISO 10365:1992 | Identical |
| NEN EN ISO 10365 : 1995 | Identical |
| UNE-EN ISO 10365:1996 | Identical |
| UNI EN ISO 10365 : 1997 | Identical |
| DIN EN ISO 10365:1995-08 | Identical |
| I.S. EN ISO 10365:1996 | Identical |
| ONORM EN ISO 10365 : 1995 | Identical |
| 08/30180284 DC : DRAFT JUNE 2008 | BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| PREN 14869-1 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| DIN EN 15870 E : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| I.S. EN 1967:2002 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| PREN 1372 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| 17/30371286 DC : 0 | BS EN 4866 - AEROSPACE SERIES - DEFINITIONS OF IMPERFECTIONS AND DEFECTS IN ORGANIC MATRIX COMPOSITE MATERIALS |
| 10/30231826 DC : 0 | BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| 14/30296756 DC : 0 | BS EN 1902 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| PREN 1373 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| UNE-EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| BS EN 14869-2:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test |
| UNE-EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| BS EN 14444:2005 | Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test |
| UNE-EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN 1895:2001 | Adhesives for paper and board, packaging and disposable sanitary products. 180°. \'T\' peel test for a flexible-to-flexible assembly |
| DIN EN 1967:2003-02 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| DIN EN 14173:2002-04 | STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| EN 13408:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength |
| 17/30345849 DC : 0 | BS EN 13144 - METALLIC AND OTHER INORGANIC COATINGS - METHOD FOR QUANTITATIVE MEASUREMENT OF ADHESION BY TENSILE TEST |
| DIN EN 15336:2007-05 | Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified) |
| PREN 13144 : DRAFT 2017 | METALLIC AND OTHER INORGANIC COATINGS - METHOD FOR QUANTITATIVE MEASUREMENT OF ADHESION BY TENSILE TEST |
| 10/30231832 DC : 0 | BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| 08/30180281 DC : DRAFT JUNE 2008 | BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| UNI EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN 1464:2010-06 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| DIN EN 1465:2009-07 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| BS EN 1902:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear creep test |
| BS EN ISO 9653:2000 | Adhesives. Test method for shear strength of adhesive bonds |
| BS EN 1465:2009 | Adhesives. Determination of tensile lap-shear strength of bonded assemblies |
| BS EN 15307:2014 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
| BS EN 1967:2002 | Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| DIN EN 1902:2015-07 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
| I.S. EN 15307:2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| I.S. EN 1464:2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| I.S. EN 14869-1:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN 14869-2:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| I.S. EN 1966:2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| I.S. EN 14293:2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| I.S. EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| I.S. EN 1465:2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| DIN EN 15336 E : 2007 | ADHESIVES - DETERMINATION OF THE TIME TO RUPTURE OF BONDED JOINTS UNDER STATIC LOAD |
| 14/30293503 DC : 0 | BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| NF EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| I.S. EN 15870:2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| DIN EN 1372:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| DIN EN 1373:2015-06 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| DIN EN 1966:2009-07 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN 14869-2 E : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| DIN EN 14869-1:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN 14869-1:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| BS EN 15336:2007 | Adhesives. Determination of the time to rupture of bonded joints under static load |
| EN 14493 : 2002 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| UNI EN 1465 : 2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES |
| UNI EN 14869-2 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| UNI EN 14869-1 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| UNI EN 1966 : 2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| UNI EN 1464 : 2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| 14/30296753 DC : 0 | BS EN 1372 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| I.S. EN ISO 9653:2000 | ADHESIVES - TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS |
| PREN 14869-2 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| 14/30296750 DC : 0 | BS EN 1373 - ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| 05/30139278 DC : DRAFT SEP 2005 | EN 15336 - ADHESIVES - DETERMINATION OF THE TIME TO RUPTURE OF BONDED JOINTS UNDER STATIC LOAD |
| I.S. CEN TR 14548:2003 | ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES |
| PREN 15307 : DRAFT 2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| DIN EN 14510 E : 2005 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - DETERMINATION OF SOLE POSITIONING TACK (SPOTTING TACK) |
| BS EN 14293:2006 | Adhesives. Adhesives for bonding parquet to subfloor. Test methods and minimum requirements |
| BS EN 1464:2010 | Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method |
| BS EN 1391:1998 | Adhesives for leather and footwear materials. A method for evaluating the bondability of materials. Minimum requirements and material classification |
| DIN EN 15307:2015-04 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| BS EN 1373:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Shear test |
| BS EN 14493:2002 | Structural adhesives. Determination of dynamic resistance to cleavage of high strength adhesive bonds under impact conditions. Wedge impact method |
| BS EN 13408:2002 | Methods of test for hydraulic setting floor smoothing and/or levelling compounds. Determination of bond strength |
| I.S. EN 1372:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - PEEL TEST |
| UNE-EN 15307:2015 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| UNE-EN 1902:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test |
| ISO 9653:1998 | Adhesives Test method for shear impact strength of adhesive bonds |
| BS EN 1372:2015 | Adhesives. Test method for adhesives for floor and wall coverings. Peel test |
| BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| I.S. EN 1373:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR TEST |
| BS EN 14173:2002 | Structural adhesives. T-peel test for flexible-to-flexible bonded assemblies |
| DIN EN 15307 E : 2015 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| EN 14510:2005 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| EN 14869-2:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 1391 : 1998 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - A METHOD FOR EVALUATING THE BONDABILITY OF MATERIALS - MINIMUM REQUIREMENTS AND MATERIAL CLASSIFICATION |
| EN 15336:2007 | Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified) |
| EN 1372:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Peel test |
| EN 14173 : 2002 | STRUCTURAL ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
| EN 15870:2009 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN 1967:2002/AC:2005 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN 1895:2001/AC:2007 | Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" peel test for a flexible-to-flexible assembly |
| EN 1373:2015 | Adhesives - Test method for adhesives for floor and wall coverings - Shear test |
| EN 1902:2015 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR AND WALL COVERINGS - SHEAR CREEP TEST |
| EN 14444:2005/AC:2008 | Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) |
| EN ISO 9653 : 2000 | Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998) |
| EN 15307:2014 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN 14293 : 2006 | ADHESIVES - ADHESIVES FOR BONDING PARQUET TO SUBFLOOR - TEST METHODS AND MINIMUM REQUIREMENTS |
| DIN EN 15870:2009-08 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| I.S. EN 14493:2002 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| PREN 1902 : DRAFT 2014 | ADHESIVES - TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS - SHEAR CREEP TEST |
| 05/30136487 DC : DRAFT JUL 2005 | EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| DIN EN 14444 E : 2006 | STRUCTURAL ADHESIVES - QUALITATIVE ASSESSMENT OF DURABILITY OF BONDED ASSEMBLIES - WEDGE RUPTURE TEST |
| DIN EN 14869-1 E : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| DIN EN 14510:2005-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| DIN EN 14869-2:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| DIN EN 14493:2003-02 | STRUCTURAL ADHESIVES - DETERMINATION OF DYNAMIC RESISTANCE TO CLEAVAGE OF HIGH STRENGTH ADHESIVE BONDS UNDER IMPACT CONDITIONS - WEDGE IMPACT METHOD |
| DIN EN 14444:2006-01 | Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) |
| ISO 472:2013 | Plastics Vocabulary |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.