EN ISO 10893-7:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
03-21-2019
04-01-2011
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
5 Equipment
6 Test method
7 Image quality
8 Image processing
9 Classification of indications
10 Acceptance limits
11 Acceptance
12 Image storage and display
13 Test report
Annex A (informative) - Examples of distribution of
imperfections
Bibliography
ISO 10893-7:2011 specifies the requirements for digital radiographic X-ray testing by either computed radiography (CR) or radiography with digital detector arrays (DDA) of the longitudinal or helical weld seams of automatic fusion arc-welded steel tubes for the detection of imperfections. ISO 10893-7:2011 specifies acceptance levels and calibration procedures.ISO 10893-7:2011 can also be applicable to the testing of circular hollow sections.
| DevelopmentNote |
Supersedes PREN ISO 10893-7. (08/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| DIN EN ISO 10893-7:2011-07 | Identical |
| UNE-EN ISO 10893-7:2011 | Identical |
| BS EN ISO 10893-7:2019 | Identical |
| NEN EN ISO 10893-7 : 2011 | Identical |
| NS EN ISO 10893-7 : 2011 | Identical |
| PN-EN ISO 10893-7:2019-04 | Identical |
| UNI EN ISO 10893-7:2019 | Identical |
| I.S. EN ISO 10893-7:2011 | Identical |
| PN EN ISO 10893-7 : 2011 | Identical |
| ISO 10893-7:2019 | Identical |
| ISO 10893-7:2011 | Identical |
| NBN EN ISO 10893-7 : 2011 | Identical |
| NF EN ISO 10893-7 : 2011 | Identical |
| NEN-EN-ISO 10893-7:2019 | Identical |
| UNI EN ISO 10893-7 : 2011 | Identical |
| ONORM EN ISO 10893-7 : 2011 | Identical |
| I.S. EN ISO 10893-7:2019 | Identical |
| BS EN ISO 10893-7:2011 | Identical |
| SN EN ISO 10893-7 : 2011 | Identical |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| UNI EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| PREN 10253-4 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC & AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| I.S. EN 10217-7:2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| 16/30332608 DC : DRAFT JAN 2016 | BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| PREN 10210-2 : DRAFT 2016 | HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| BS EN 10217-7:2014 | Welded steel tubes for pressure purposes. Technical delivery conditions Stainless steel tubes |
| DIN EN 10217-7:2015-01 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| PREN 10219-2 : DRAFT 2016 | COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| 16/30332614 DC : 0 | BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS |
| EN 14784-2:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 17636:2003 | Non-destructive testing of welds Radiographic testing of fusion-welded joints |
| ISO 14096-1:2005 | Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control |
| EN 13068-2:1999 | Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices |
| ISO 5576:1997 | Non-destructive testing Industrial X-ray and gamma-ray radiology Vocabulary |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| ISO 19232-3:2013 | Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes |
| ISO 14096-2:2005 | Non-destructive testing — Qualification of radiographic film digitisation systems — Part 2: Minimum requirements |
| ISO 11699-1:2008 | Non-destructive testing — Industrial radiographic film — Part 1: Classification of film systems for industrial radiography |
| ISO 11484:2009 | Steel products — Employer's qualification system for non-destructive testing (NDT) personnel |
| ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
| ISO 19232-5:2013 | Non-destructive testing Image quality of radiographs Part 5: Determination of the image unsharpness value using duplex wire-type image quality indicators |
| EN 14784-1:2005 | Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems |
| ISO 19232-2:2013 | Non-destructive testing — Image quality of radiographs — Part 2: Determination of the image quality value using step/hole-type image quality indicators |
| ASTM E 2446 : 2016 : REDLINE | Standard Practice for Manufacturing Characterization of Computed Radiography Systems |
| EN 13068-3:2001 | Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays |
| EN 13068-1:1999 | Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.