• There are no items in your cart

EN ISO 1461:2009

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
Withdrawn date

11-30-2009

Published date

05-15-2009

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements
  4.1 General
  4.2 Hot dip galvanizing bath
  4.3 Information to be supplied by the purchaser
  4.4 Safety
5 Acceptance inspection and sampling
6 Coating properties
  6.1 Appearance
  6.2 Thickness
  6.3 Renovation
  6.4 Adhesion
  6.5 Acceptance criteria
7 Certificate of compliance
Annex A (normative) - Information to be supplied
Annex B (normative) - Safety and process requirements
Annex C (informative) - Renovation of uncoated or damaged
        areas
Annex D (informative) - Determination of thickness
Annex E (informative) - Corrosion resistance of hot dip
        galvanized coatings
Bibliography

ISO 1461:2009 specifies the general properties of coatings and test methods for coatings applied by dipping fabricated iron and steel articles (including certain castings) in a zinc melt (containing not more than 2 % of other metals). It does not apply to the following:sheet, wire and woven or welded mesh products that are continuously hot dip galvanized;tube and pipe that are hot dip galvanized in automatic plants;hot dip galvanized products (e.g. fasteners) for which specific standards exist and which might include additional requirements or requirements which are different from those of ISO 1461:2009.After-treatment/over-coating of hot dip galvanized articles is not covered by ISO 1461:2009.

Committee
CEN/TC 262
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Withdrawn

DIN EN 13071-2:2013-12 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
UNE-EN 50341-1:2017 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
BS EN 50119 : 2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
11/30247279 DC : 0 BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL
DIN EN 124-3:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
PD CEN/TS 16811-3:2015 Winter maintenance equipment. De-icing agents Other solid and liquid de-icing agents. Requirements and test methods
11/30239476 DC : 0 BS EN 10025-2 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
10/30212123 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
UNI EN 1474-1 : 2009 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 1993-6:2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
04/30055611 DC : 0 BS EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
I.S. EN 10025-2:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
BS EN 16927:2017 Mini-pools. Specific requirements including safety and test methods for mini-pools
15/30325000 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
PREN 845-1 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
04/30123995 DC : DRAFT OCT 2004 EN 50216-10 - POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
DIN EN 15644 E : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
BS EN 50216-10:2009 Power transformer and reactor fittings Oil-to-air heat exchangers
08/30175210 DC : DRAFT APR 2008 BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
DIN EN 12496:2014-02 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
10/30212126 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
08/30189604 DC : 0 BS EN 10223-2 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION, AND FENCING PURPOSES
PREN 12574-2 : DRAFT 2015 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 124-4 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE
BS EN 14490:2010 Execution of special geotechnical works. Soil nailing
11/30239488 DC : 0 BS EN 10025-6 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS
DIN EN 124-3 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
DIN EN 10025-4:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
PREN 50119 : DRAFT 2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
15/30323520 DC : 0 BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
98/105109 DC : DRAFT JUNE 1998 PREN 1317-5 - ROAD RESTRAINT SYSTEMS - PART 5: DURABILITY AND EVALUATION OF CONFORMITY
EN IEC 61730-1:2018/AC:2018-06 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2016)
CEI EN 61537 : 2007 CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS
UNE-EN 12899-2:2010 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
UNE-EN 1317-5:2008 Road restraint systems - Part 5: Product requirements and evaluation of conformity for vehicle restraint systems
PREN 840-5 : DRAFT 2010 MOBILE WASTE CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 16927 E : 2017 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
17/30358108 DC : 0 BS EN 17125 - DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
I.S. EN 16927:2017 MINI-POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI-POOLS
I.S. EN 1474-1:2008 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
PREN 13914-1 : DRAFT 2013 DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING
18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
NF EN 1993-6/NA : 2011 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES - NATIONAL ANNEX TO NF EN 1993-6:2007 - CRANE SUPPORTING STRUCTURES
14/30297831 DC : 0 BS EN 1090-4 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 10025-6:2004+A1:2009 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
NF EN 50164-2 : 2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
I.S. EN 15773:2018 INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
I.S. EN 13071-1:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
EN 1995-1-1:2004/A2:2014 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
DIN EN 12574-2:2015-08 (Draft) STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 12899-2:2008-02 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
DIN EN 1317-5:2012-06 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
BS EN 12574-2:2017 Stationary waste containers Performance requirements and test methods
BS EN 845-2 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
BS EN 10223-2:2012 Steel wire and wire products for fencing and netting Hexagonal steel wire netting for agricultural, insulation and fencing purposes
BS EN 517:2006 Prefabricated accessories for roofing. Roof safety hooks
BS EN 10025-2:2004 Hot rolled products of structural steels Technical delivery conditions for non-alloy structural steels
BS EN 1765:2004 Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
BS EN 1995-1-1 : 2012 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
BS EN 12899-1:2007 Fixed, vertical road traffic signs Fixed signs
BS EN 10305-2:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold drawn tubes
BS EN 39:2001 Loose steel tubes for tube and coupler scaffolds. Technical delivery conditions
BS EN 12811-2:2004 Temporary works equipment Information on materials
BS EN 10025-3:2004 Hot rolled products of structural steels Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
DIN EN 10305-1:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
BS EN 1993-1-1 : 2005 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
UNE-EN 10149-3:2014 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
I.S. EN 10305-2:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
I.S. EN 10223-7:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
I.S. EN 13914-1:2016 DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING
DIN EN 1993-6:2010-12 Eurocode 3: Design of steel structures - Part 6: Crane supporting structures (includes Corrigendum AC:2009)
EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
EN 12811-2:2004 Temporary works equipment - Part 2: Information on materials
EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
EN 10223-8:2013 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
EN 1123-3:2004 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
EN 10223-7:2012 Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
EN 124-4:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
EN 12574-2:2017 Stationary waste containers - Part 2: Performance requirements and test methods
EN 12899-1:2007 Fixed, vertical road traffic signs - Part 1: Fixed signs
EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
EN 12899-2:2007 Fixed, vertical road traffic signs - Part 2: Transilluminated traffic bollards (TTB)
EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
EN 10223-2:2012 Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes
EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
EN 1123-1:1999/A1:2004 PIPES AND FITTINGS OF LONGITUDINALLY WELDED HOT-DIP GALVANIZED STEEL PIPES WITH SPIGOT AND SOCKET FOR WASTE WATER SYSTEMS - PART 1: REQUIREMENTS, TESTING, QUALITY CONTROL
EN 10149-2:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
DIN EN 10025-4:2005-02 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 62271-202:2014/AC:2014 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014)
DIN EN 10025-6:2009-08 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
CEN/TS 16811-3:2015 Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods
EN 10223-4:2012 Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing
EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
EN 13071-2:2008/AC:2010 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
PREN 10025-3 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
UNE-EN 124-4:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete
I.S. EN 12329:2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL
BS EN 14545:2008 Timber structures. Connectors. Requirements
BS EN 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
16/30323507 DC : 0 BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
BS EN 10223-8:2013 Steel wire and wire products for fencing and netting Welded mesh gabion products
BS EN 50397-2:2009 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC Accessories for covered conductors. Tests and acceptance criteria
PREN 711 : DRAFT 2015 INLAND NAVIGATION VESSELS - RAILINGS FOR DECKS AND SIDE DECKS - REQUIREMENTS, TYPES
UNI EN 15644 : 2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
08/30189610 DC : 0 BS EN 10223-4 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 4: STEEL WIRE WELDED MESH FENCING
17/30341013 DC : DRAFT AUG 2017 BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN EN 16582-1 E : 2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
02/106055 DC : 0 PREN 14545 - TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
DIN EN 10025-6:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
PREN 1317-5 : DRAFT 2013 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS, TEST AND ASSESSMENT METHODS AND ACCEPTANCE CRITERIA
02/103834 DC : DRAFT JUN 2002 PREN 14475 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
CEI EN 62155 : 2004 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
07/30166781 DC : 0 BS EN 50164-2 AMD 2 - LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
15/30324994 DC : 0 BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
BS EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood. Specifications and requirements
UNE-EN 1993-1-1:2013 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings
PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
12/30265307 DC : 0 BS EN 124-4 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL REINFORCED CONCRETE
I.S. EN 10025-6:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
CEI EN 62561-2 : 2013 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
DIN EN 10025-2:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
DIN EN 10025-3:2011-04 (Draft) HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
BS EN 10025-4:2004 Hot rolled products of structural steels Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
DIN EN 14592 E : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
EN IEC 62688:2018 Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification
BS EN 14592 : 2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 10223-8:2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
UNE-EN 1993-3-1:2013 Eurocode 3 - Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts
PREN 10348-2 : DRAFT 2016 STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS
I.S. EN 50164-2:2008 LIGHTNING PROTECTION COMPONENTS (LPC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES
DIN EN 13071-1:2008-10 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
BS EN 10025-6:2019 Hot rolled products of structural steels Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition
EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
I.S. EN 50216-10:2009 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 1993-1-1:2005 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
I.S. EN 50119:2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
DIN EN 12899-1:2008-02 FIXED VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
DIN EN 13438:2013-12 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
DIN EN 14396:2004-04 Fixed ladders for manholes
DIN EN 1123-3:2005-02 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 3: Dimensions and special requirements for vacuum drainage systems and for drainage systems in shipbuilding
DIN EN 14475:2006-04 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
BS EN 840-5:2012 Mobile waste and recycling containers Performance requirements and test methods
UNE-EN 10305-3:2016 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
UNE-EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
UNE-EN 10305-5:2016 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
UNE-EN 1765:2017 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
DIN EN 10305-3:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
UNE-EN 10149-2:2014 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
BS EN 12329:2000 Corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel
BS EN 1473:2016 Installation and equipment for liquefied natural gas. Design of onshore installations
BS EN 1462:2004 Brackets for eaves gutters. Requirements and testing
I.S. EN 10305-5:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
I.S. EN 1462:2004 BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING
I.S. EN 10149-3:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS
DIN EN 12329:2000-09 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON AND STEEL
I.S. EN 12574-2:2017 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 1317-5:2007 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
I.S. EN 40-5:2002 LIGHTING COLUMNS - PART 5: REQUIREMENTS FOR STEEL LIGHTING COLUMNS
DIN EN 12574-2:2017-05 STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 10223-2:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES
I.S. EN 10149-2:2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
I.S. EN 711:2016 INLAND NAVIGATION VESSELS - RAILINGS FOR DECKS AND SIDE DECKS - REQUIREMENTS, DESIGNS AND TYPES
I.S. EN 517:2006 PREFABRICATED ACCESSORIES FOR ROOFING - ROOF SAFETY HOOKS
I.S. EN 13438:2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
I.S. EN 10223-4:2012 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING
I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 12899-1:2007 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
I.S. EN 516:2006 PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS
I.S. EN 1765:2016 RUBBER HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICES - SPECIFICATION FOR THE ASSEMBLIES
I.S. EN 10305-1:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
I.S. EN 10305-3:2016 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
I.S. EN 10255:2004 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 845-1:2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
VDE 0674-1 : 2001-12 TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV
VDI 3822 Blatt 1.6:2010-11 Failure analysis - Liquid metal induced crack growth by hot dip galvanising
DIN EN 16927:2017-05 MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
DIN EN 60168 : 2001-12 TESTS ON INDOOR AND OUTDOOR POST INSULATORS OF CERAMIC MATERIAL OR GLASS FOR SYSTEMS WITH NOMINAL VOLTAGES GREATER THAN 1 KV
VDI 2579:2008-05 Emission control - Hot-dip zinc galvanizing plants
DIN EN 1993-3-1:2010-12 Eurocode 3: Design of steel structures - Part 3-1: Towers, masts and chimneys - Towers and masts (includes Corrigendum AC:2009)
PREN 10305-5 : DRAFT 2015 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED COLD SIZED SQUARE AND RECTANGULAR TUBES
11/30239479 DC : 0 BS EN 10025-3 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
DIN EN 1474-1:2009-03 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
16/30332608 DC : DRAFT JAN 2016 BS EN 10210-2 - HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
I.S. EN 1996-3:2006 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES (INCLUDING IRISH NATIONAL ANNEX)
BS EN 124-4:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel reinforced concrete
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
09/30201490 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
13/30265750 DC : 0 BS EN 13914-1 - DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING
15/30325003 DC : 0 BS EN 10305-2 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of steel or aluminium alloys
NF EN 50119 : 2010 AMD 1 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
12/30265304 DC : 0 BS EN 124-3 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE FROM STEEL OR ALUMINIUM ALLOY
PREN 10025-4 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
12/30265756 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
10/30234726 DC : 0 BS EN 12496 - GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
07/30161334 DC : 0 BS EN 15644 - TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
11/30239482 DC : 0 BS EN 10025-4 - HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
BS EN 61537:2007 Cable management. Cable tray systems and cable ladder systems
06/30133250 DC : 0 BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
05/30128234 DC : DRAFT FEB 2005 EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
03/116049 DC : DRAFT NOV 2003 BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS
UNI EN 14592 : 2012 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
15/30317833 DC : 0 BS EN 711 - INLAND NAVIGATION VESSELS - RAILINGS FOR DECKS AND SIDE DECKS - REQUIREMENTS, TYPES
07/30166095 DC : 0 EN 124 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS
DIN EN 10149-3:2013-12 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS
07/30172380 DC : 0 BS EN 14490 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
UNE-EN 62561-2:2012 Lightning Protection System Components (LPSC) - Part 2: Requirements for conductors and earth electrodes
PREN 1337-1 : DRAFT 2018 STRUCTURAL BEARINGS - PART 1: GENERAL
I.S. EN 62561-2:2012 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 2: REQUIREMENTS FOR CONDUCTORS AND EARTH ELECTRODES (IEC 62561-2:2012 (MOD))
UNI EN 15773 : 2009 INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES (DUPLEX SYSTEMS) - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
PREN 10210-2 : DRAFT 2016 HOT FINISHED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
I.S. EN 13071-2:2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
I.S. EN 16582-1:2015 DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
I.S. EN 61537:2007 CABLE MANAGEMENT - CABLE TRAY SYSTEMS AND CABLE LADDER SYSTEMS
CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
I.S. EN 10025-3:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
PREN 17125 : DRAFT 2017 DOMESTIC SPAS AND HOT TUBS - SAFETY REQUIREMENTS AND TEST METHODS
BS EN 13071-1:2008 Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements
UNE-EN 15773:2010 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
PREN 10025-2 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
PREN 1090-4 : DRAFT 2014 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 4: TECHNICAL REQUIREMENTS FOR THIN-GAUGE, COLD-FORMED STEEL ELEMENTS AND STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS
EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
UNE-EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
PREN 10255 : DRAFT 2010 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 15644:2009 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
DIN EN 1462:2004-12 Brackets for eaves gutters - Requirements and testing
DIN EN 10223-4:2013-02 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING
DIN EN 1996-3:2010-12 Eurocode 6: Design of masonry structures - Part 3: Simplified calculation methods for unreinforced masonry structures (includes Corrigendum AC:2009)
DIN EN 13914-1:2016-09 DESIGN, PREPARATION AND APPLICATION OF EXTERNAL RENDERING AND INTERNAL PLASTERING - PART 1: EXTERNAL RENDERING
DIN EN 10223-2:2013-02 Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes
DIN EN 10305-2:2016-08 STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 2: WELDED COLD DRAWN TUBES
BS EN 10305-5:2010 Steel tubes for precision applications. Technical delivery conditions Welded and cold sized square and rectangular tubes
BS EN 12899-2:2007 Fixed, vertical road traffic signs Transilluminated traffic bollards (TTB)
BS EN 13283:2002 Zinc and zinc alloys. Secondary zinc
BS EN 1123-3:2004 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
BS EN 711:2016 Inland navigation vessels. Railings for decks and side decks. Requirements, designs and types
DIN EN 10305-5:2016-08 Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes
EN 1474-1:2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 1: Design and testing of transfer arms
EN 13914-1:2016 Design, preparation and application of external rendering and internal plastering - Part 1: External rendering
UNI EN 10223-8 : 2014 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
UNI EN 10149-3 : 2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED OR NORMALIZED ROLLED STEELS
UNI EN 1317-5 : 2012 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
UNI EN 10255 : 2007 NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
UNI EN 10149-2 : 2013 HOT ROLLED FLAT PRODUCTS MADE OF HIGH YIELD STRENGTH STEELS FOR COLD FORMING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICALLY ROLLED STEELS
UNI EN 10223-7 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
UNI EN 12899-2 : 2008 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 2: TRANSILLUMINATED TRAFFIC BOLLARDS (TTB)
UNI EN 12496 : 2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
UNI EN 13438 : 2013 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
UNI EN 1993-6 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
UNI EN 10223-4 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 4: STEEL WIRE WELDED MESH FENCING
UNI EN 12899-1 : 2008 FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS
UNI EN 1993-1-1 : 2014 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
UNI EN 1995-1-1 : 2014 EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
UNI EN 14475 : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
UNI EN 40-5 : 2003 LIGHTING COLUMNS - REQUIREMENTS FOR STEEL LIGHTING COLUMNS
UNI EN 10223-2 : 2013 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES
I.S. EN 124-4:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE
I.S. EN 1995-1-1:2005 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
DIN EN 14545 E : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
UNI EN 14545 : 2009 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
DIN EN 14490:2010-11 Execution of special geotechnical works - Soil nailing
I.S. EN 39:2001 LOOSE STEEL TUBES FOR TUBE AND COUPLER SCAFFOLDS - TECHNICAL DELIVERY CONDITIONS
PREN 13438 : DRAFT 2012 PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
12/30260570 DC : 0 BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
BS EN 50164-2:2008 Lightning protection components (LPC) Requirements for conductors and earth electrodes
EN 10025-3:2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels
BS EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
13/30279620 DC : 0 BS EN 16582-1 - DOMESTIC SWIMMING POOLS - PART 1: GENERAL REQUIREMENTS INCLUDING SAFETY AND TEST METHODS
PREN 10223-4 : DRAFT 2008 STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 4: STEEL WIRE WELDED MESH FENCING
08/30189619 DC : 0 BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
05/30134192 DC : DRAFT MAY 2005 EN 516 - PREFABRICATED ACCESSORIES FOR ROOFING - INSTALLATIONS FOR ROOF ACCESS - WALKWAYS, TREADS AND STEPS
06/30133254 DC : 0 BS EN 13071-2 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
12/30256073 DC BS EN 12899-3 AMD1. Fixed, vertical road traffic signs. Part 3. Delineator posts and retroreflectors
BS EN 16582-1:2015 Domestic swimming pools General requirements including safety and test methods
BS EN 1474-1:2008 Installation and equipment for liquefied natural gas. Design and testing of marine transfer systems Design and testing of transfer arms
DIN EN 14592:2012-07 Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012)
PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
18/30365863 DC : 0 BS EN 1337-1 - STRUCTURAL BEARINGS - PART 1: GENERAL
10/30232452 DC : 0 BS EN 840-5 - MOBILE WASTE CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 1993-3-1:2006 Eurocode 3. Design of steel structures Towers, masts and chimneys
15/30324991 DC : 0 BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
09/30201494 DC : 0 BS EN 10305-3 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 3: WELDED COLD SIZED TUBES
DIN EN 10149-2:2013-12 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Technical delivery conditions for thermomechanically rolled steels
DIN EN 10223-8:2014-04 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS
NF EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
DIN EN 14490 E : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
UNI EN 1993-3-1 : 2007 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS
UNE-EN 14592:2009 Timber structures - Dowel-type fasteners - Requirements
PREN 10025-6 : DRAFT 2011 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN QUENCHED AND TEMPERED CONDITIONS
I.S. EN 10025-4:2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS
UNI EN 14490 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
I.S. EN IEC 61730-1:2018 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
S.R. CWA 16221:2010 VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION
PREN 845-2 : DRAFT 2012 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
BS EN 13071-2 : 2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
UNI EN 13071-1 : 2008 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
EN 10025-4:2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels
I.S. EN 14592:2008 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
I.S. EN 14490:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - SOIL NAILING
I.S. EN 62155:2003 HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
I.S. EN 14545:2008 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
DIN EN 10255:2015-05 (Draft) NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
DIN EN 14475 E : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
DIN EN 840-5:2013-02 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN EN 10223-7:2013-02 STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING
DIN EN 711:2016-09 INLAND NAVIGATION VESSELS - RAILINGS FOR DECKS AND SIDE DECKS - REQUIREMENTS, DESIGNS AND TYPES
BS EN 40-5:2002 Lighting columns Requirements for steel lighting columns
BS EN 1993-6:2007 Eurocode 3. Design of steel structures Crane supporting structures
BS EN 845-1 : 2013 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
BS EN 10255:2004 Non-alloy steel tubes suitable for welding and threading. Technical delivery conditions
BS EN 14475:2006 Execution of special geotechnical works. Reinforced fill
UNE-EN 10223-8:2014 Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products
BS EN 10149-2:2013 Hot rolled flat products made of high yield strength steels for cold forming Technical delivery conditions for thermomechanically rolled steels
EN 840-5:2012 Mobile waste and recycling containers - Part 5: Performance requirements and test methods
UNE-EN 840-5:2013 Mobile waste and recycling containers - Part 5: Performance requirements and test methods
I.S. EN 50119:2020 Railway applications - Fixed installations - Electric traction overhead contact lines
BS EN 10223-7:2012 Steel wire and wire products for fencing and netting Steel wire welded panels for fencing
BS EN 13914-1:2016 Design, preparation and application of external rendering and internal plastering External rendering
UNE-EN 10305-2:2016 Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
UNE-EN 10223-7:2013 Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing
I.S. EN 840-5:2012 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
UNE-EN 12496:2013 Galvanic anodes for cathodic protection in seawater and saline mud
UNE-EN 14475:2011 Execution of special geotechnical works - Reinforced fill
BS EN 10305-3:2016 Steel tubes for precision applications. Technical delivery conditions Welded cold sized tubes
BS EN 14396:2004 Fixed ladders for manholes
UNI EN 840-5 : 2013 MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS
BS EN 13438:2013 Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
UNE-EN 10223-2:2013 Steel wire and wire products for fencing and netting - Part 2: Hexagonal steel wire netting for agricultural, insulation and fencing purposes
BS EN 10305-1:2016 Steel tubes for precision applications. Technical delivery conditions Seamless cold drawn tubes
BS EN 516:2006 Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
EN 50119 : 2009 AMD 1 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
BS EN 1317-5 : 2007 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
BS EN 10223-4:2012 Steel wire and wire products for fencing and netting Steel wire welded mesh fencing
BS EN 1123-1:1999 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems Requirements, testing, quality control
EN 14592:2008+A1:2012 Timber structures - Dowel-type fasteners - Requirements
EN 845-2:2013+A1:2016 SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 845-1:2013+A1:2016 Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets
EN 1996-3:2006/AC:2009 EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 3: SIMPLIFIED CALCULATION METHODS FOR UNREINFORCED MASONRY STRUCTURES
EN 1462:2004 Brackets for eaves gutters - Requirements and testing
EN 39:2001 Loose steel tubes for tube and coupler scaffold - Technical delivery conditions
EN 40-5:2002 Lighting columns - Part 5: Requirements for steel lighting columns
EN 14490:2010 Execution of special geotechnical works - Soil nailing
EN 1993-3-1:2006/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS
EN 14545:2008 Timber structures - Connectors - Requirements
EN 1765:2016 Rubber hose assemblies for oil suction and discharge services - Specification for the assemblies
EN 15644:2008 Traditionally designed prefabricated stairs made of solid wood - Specifications and requirements
EN 711:2016 Inland navigation vessels - Railings for decks and side decks - Requirements, designs and types
EN 516:2006 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
EN 1993-6:2007/AC:2009 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 6: CRANE SUPPORTING STRUCTURES
EN 14475:2006/AC:2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
EN 1993-1-1:2005/A1:2014 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
EN 517:2006 Prefabricated accessories for roofing - Roof safety hooks
EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
EN 14396:2004 Fixed ladders for manholes
PREN 50341-1 : DRAFT 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
DIN EN 124-4:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 4: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL REINFORCED CONCRETE
06/30150265 DC : 0 EN 1474-1 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
CEI EN 50397-2 : 2011 COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA
12/30238456 DC : 0 BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES
UNI EN 13071-2 : 2013 STATIONARY WASTE CONTAINERS UP TO 5000L, TOP LIFTED AND BOTTOM EMPTIED - PART 2: ADDITIONAL REQUIREMENTS FOR UNDERGROUND OR PARTLY UNDERGROUND SYSTEMS
15/30328805 DC : 0 BS EN 16927 - MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
BS EN 62561-2:2012 Lightning Protection System Components (LPSC) Requirements for conductors and earth electrodes
PREN 15773 : DRAFT 2016 INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES
DIN EN 15644:2009-03 TRADITIONALLY DESIGNED PREFABRICATED STAIRS MADE OF SOLID WOOD - SPECIFICATIONS AND REQUIREMENTS
09/30201486 DC : 0 BS EN 10305-1 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 1: SEAMLESS COLD DRAWN TUBES
09/30201500 DC : 0 BS EN 10305-5 - STEEL TUBES FOR PRECISION APPLICATIONS - TECHNICAL DELIVERY CONDITIONS - PART 5: WELDED AND COLD SIZED SQUARE AND RECTANGULAR TUBES
DIN EN 14545:2009-02 TIMBER STRUCTURES - CONNECTORS - REQUIREMENTS
UNI EN 10025-6 : 2009 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
16/30340708 DC : 0 BS EN 10348-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - GALVANIZED REINFORCING STEEL - PART 2: GALVANIZED REINFORCING STEEL PRODUCTS
12/30265747 DC : 0 BS EN 845-2 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS
EN 16582-1:2015 Domestic swimming pools - Part 1: General requirements including safety and test methods
10/30233309 DC : 0 BS EN 10255 - NON-ALLOY STEEL TUBES SUITABLE FOR WELDING AND THREADING - TECHNICAL DELIVERY CONDITIONS
UNE-EN 124-3:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys
14/30297213 DC : 0 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
S.R. CEN/TS 16811-3:2015 WINTER MAINTENANCE EQUIPMENT - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
UNE-EN 13071-2:2008 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2: Additional requirements for underground or partly underground systems
PREN 10219-2 : DRAFT 2016 COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
DIN EN 16582-1:2015-11 Domestic swimming pools - Part 1: General requirements including safety and test methods
UNE-EN 14490:2013 Execution of special geotechnical works - Soil nailing
PREN 10223-2 : DRAFT 2008 STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 2: HEXAGONAL STEEL WIRE NETTING FOR AGRICULTURAL, INSULATION AND FENCING PURPOSES
I.S. EN 50397-2:2009 COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA
I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
BS EN 10025-6 : 2004 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION
I.S. EN 12496:2013 GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD
I.S. EN 124-3:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 3: GULLY TOPS AND MANHOLE TOPS MADE OF STEEL OR ALUMINIUM ALLOYS
EN 15773:2018 Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines
I.S. EN IEC 62688:2018 CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION
UNE-EN 16927:2017 Mini-pools - Specific requirements including safety and test methods for mini-pools
16/30332614 DC : 0 BS EN 10219-2 - COLD FORMED WELDED STRUCTURAL STEEL HOLLOW SECTIONS - PART 2: TECHNICAL DELIVERY CONDITIONS
UNE-EN 50216-10:2010 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
CEI EN 50216-10 : 2010 POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS
DIN EN 16927:2015-10 (Draft) MINI POOLS - SPECIFIC REQUIREMENTS INCLUDING SAFETY AND TEST METHODS FOR MINI POOLS
DIN EN 1993-1-1:2010-12 Eurocode 3: Design of steel structures - Part 1-1: General rules and rules for buildings (includes Corrigendum AC:2009)
I.S. EN 1993-3-1:2006 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-1: TOWERS, MASTS AND CHIMNEYS - TOWERS AND MASTS (INCLUDING IRISH NATIONAL ANNEX)
DIN EN 1995-1-1 E : 2010 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
DIN EN 14396 E : 2004 FIXED FOR LADDERS FOR MANHOLES
UNE-EN 10223-4:2013 Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing
BS EN ISO 14713:1999 Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines
UNE-EN 12574-2:2017 Stationary waste containers - Part 2: Performance requirements and test methods
BS EN 10149-3:2013 Hot rolled flat products made of high yield strength steels for cold forming Technical delivery conditions for normalized or normalized rolled steels
BS EN 62271-202:2014 High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation
BS EN 1996-3:2006 Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures
BS EN 13101:2002 Steps for underground man entry chambers. Requirements, marking, testing and evaluation of conformity
EN 13071-1:2008/AC:2010 STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS
EN 10305-1:2016 Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
EN 12329 : 2000 CORROSION PROTECTION OF METALS - ELECTRODEPOSITED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENT ON IRON OR STEEL
EN 13101:2002 Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity
EN 10149-3:2013 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Technical delivery conditions for normalized or normalized rolled steels
EN 1317-5:2007+A2:2012/AC:2012 ROAD RESTRAINT SYSTEMS - PART 5: PRODUCT REQUIREMENTS AND EVALUATION OF CONFORMITY FOR VEHICLE RESTRAINT SYSTEMS
DIN EN 516:2006-04 Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps
DIN EN 10255:2007-07 Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions (includes Amendment A1:2007)
EN 50164-2:2008 Lightning Protection Components (LPC) - Part 2: Requirements for conductors and earth electrodes
EN 61537:2007 Cable management - Cable tray systems and cable ladder systems
DIN CEN/TS 16811-3;DIN SPEC 30757:2016-08 WINTER SERVICE EQUIPMENT AND PRODUCTS - DE-ICING AGENTS - PART 3: OTHER SOLID AND LIQUID DE-ICING AGENTS - REQUIREMENTS AND TEST METHODS
DIN EN 517:2006-05 Prefabricated accessories for roofing - Roof safety hooks
EN 13283:2002 Zinc and zinc alloys - Secondary zinc
EN 10255:2004+A1:2007 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions
EN 50216-10:2009 Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers
EN 50397-2:2009 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria

ISO 9223:2012 Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
ISO 2063:2005 Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys
ISO 2859-3:2005 Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures
ISO 3549:1995 Zinc dust pigments for paints — Specifications and test methods
ISO 12944-5:2007 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems
ISO 2808:2007 Paints and varnishes Determination of film thickness
ISO 752:2004 Zinc ingots
ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
ISO 3882:2003 Metallic and other inorganic coatings — Review of methods of measurement of thickness
ISO 2859-2:1985 Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
EN 746-4 : 2000 INDUSTRIAL THERMOPROCESSING EQUIPMENT - PART 4: PARTICULAR REQUIREMENTS FOR HOT DIP GALVANIZING THERMOPROCESSING EQUIPMENT
EN 13438:2013 Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes
EN 13283:2002 Zinc and zinc alloys - Secondary zinc
EN 1179:2003 Zinc an zinc alloys - Primary zinc
ISO 16276-2:2007 Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing
EN 10163-3:2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections
ISO 10474:2013 Steel and steel products — Inspection documents
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements
ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
ISO 1460:1992 Metallic coatings Hot dip galvanized coatings on ferrous materials Gravimetric determination of the mass per unit area
ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
ISO 6988:1985 Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.