EN ISO 14911 : 1999
Current
Current
The latest, up-to-date edition.
WATER QUALITY - DETERMINATION OF DISSOLVED LI+, NA+, NH4+, K+, MN2+, CA2+, MG2+, SR2+ AND BA2+ USING ION CHROMATOGRAPHY - METHOD FOR WATER AND WASTE WATER
Published date
08-18-1999
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Interferences
4 Principle
5 Essential minimum requirements
6 Reagents
7 Apparatus
8 Quality requirements for the separator column
9 Sampling and sample pretreatment
10 Procedure
11 Calculation
12 Expression of results
13 Test report
Annex A (informative) Interlaboratory trial
Annex B (informative) Bibliography
Defines a procedure for determining the dissolved cations Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ in water. (ie. drinking, surface and waste water). Pretreatment of the sample and the application of a conductivity detector (CD) make the ranges shown in Table 1 possible. Applicability of the procedure for waste water samples should be proven in each case.
| Committee |
CEN/TC 230
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| I.S. EN ISO 14911:1999 | Identical |
| ISO 14911:1998 | Identical |
| PN EN ISO 14911 : 2002 | Identical |
| NBN EN ISO 14911 : 1999 | Identical |
| NS EN ISO 14911 : 1ED 1999 | Identical |
| UNE-EN ISO 14911:2000 | Identical |
| SN EN ISO 14911 : 1999 | Identical |
| NEN EN ISO 14911 : 1999 | Identical |
| UNI EN ISO 14911 : 2001 | Identical |
| NF EN ISO 14911 : 1999 | Identical |
| SS-EN ISO 14911 : 2000 | Identical |
| BS EN ISO 14911:1999 | Identical |
| DIN EN ISO 14911:1999-12 | Identical |
| BS EN 16070:2014 | Products used for treatment of water intended for human consumption. Natural zeolite |
| 16/30329416 DC : 0 | BS EN 12566-3 - SMALL WASTEWATER TREATMENT SYSTEMS UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| DIN EN 16913 E : 2017 | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| 03/106266 DC : DRAFT APR 2003 | BS EN 14671 - CHARACTERISATION OF SLUDGES - PRE-TREATMENT FOR THE DETERMINATION OF EXTRACTABLE AMMONIA USING 2 MOL/L POTASSIUM CHLORIDE |
| 15/30314073 DC : 0 | BS 16913 - AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 |
| PD CEN/TR 16269:2011 | Ambient air. Guide for the measurement of anions and cations in PM2,5 |
| I.S. EN 12566-7:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS |
| EN 16913:2017 | Ambient air - Standard method for measurement of NO3¯, SO4²¯, Cl¯, NH4+, Na+, K+, Mg²+, Ca²+ in PM2,5 as deposited on filters |
| BS EN 12566-6:2013 | Small wastewater treatment systems for up to 50 PT Prefabricated treatment units for septic tank effluent |
| I.S. EN 12566-3:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| EN 12566-6:2016 | Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent |
| CEN/TS 16177:2012 | Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite |
| EN 12566-3:2016 | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| EN 12566-7:2016 | Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units |
| CEN/TR 16184:2011 | Characterization of Waste - State-of-the-art document - Analysis of eluates |
| BS EN 15664-1 : 2008 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| 10/30233988 DC : 0 | BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| PREN 12566-6 : DRAFT 2015 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT |
| UNI EN 15664-1 : 2014 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| I.S. EN 15664-1:2008 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| I.S. EN 16058:2012 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| DIN EN 15664-1:2014-03 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| VDI 3878:2017-09 | Stationary source emissions - Measurement of ammonia (and gaseous ammonium compounds) - Manual method |
| VDI 3869 Blatt 4:2012-03 | Measurement of ammonia in ambient air - Sampling with diffusive samplers - Photometric or ion chromatographic analysis |
| VDI 3794 Blatt 2:2013-07 | Determination of depositon fluxes of ambient air pollutants - Determination of the deposition flux of ammonia and ammonium compounds by means of the IRMA method |
| VDI 4320 Blatt 3:2017-01 | Measurement of atmospheric depositions - Determination of the deposition of water-soluble anions and cations - Sampling with bulk- and wet only-collectors |
| 07/30162208 DC : 0 | BS EN 15664-1 - INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION |
| BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| UNE-EN 16070:2015 | Products used for treatment of water intended for human consumption - Natural zeolite |
| DIN EN 16070:2014-06 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
| BS EN 16913:2017 | Ambient air. Standard method for measurement of NO<sub>3</sub>$u-, SO<sub>4</sub><sup>2</sup>$u-, Cl$u-, NH<sub>4</sub>$u+, Na$u+, K$u+, Mg<sup>2</sup>$u+, Ca<sup>2</sup>$u+ in PM2,5 as deposited on filters |
| I.S. EN 16913:2017 | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| S.R. CEN/TR 16269:2011 | AMBIENT AIR - GUIDE FOR THE MEASUREMENT OF ANIONS AND CATIONS IN PM2,5 |
| I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| DIN EN 14671 E : 2006 | CHARACTERIZATION OF SLUDGES - PRE-TREATMENT FOR THE DETERMINATION OF EXTRACTABLE AMMONIA USING 2 MOL/L POTASSIUM CHLORIDE |
| UNE-CEN/TR 16184:2011 IN | Characterization of Waste - State-of-the-art document - Analysis of eluates |
| UNI CEN/TS 16177 : 2012 | Sludge, treated organic waste and soil - Extraction for the determination of extractable ammonia, nitrates and nitrites |
| DIN EN 16058:2012-07 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| 16/30329422 DC : 0 | BS EN 12566-7 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS |
| DIN EN 16682 E : 2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| BS EN 16058:2012 | Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of surface coatings with nickel layers. Long-term test method |
| BS EN 16682:2017 | Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| UNE-EN 12566-6:2017 | Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent |
| 10/30213237 DC : 0 | BS EN 16058 - INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| UNI EN 16070 : 2014 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
| DIN EN 16682:2016-01 (Draft) | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| UNI EN 16058 : 2012 | INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD |
| I.S. EN 16682:2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| BS EN 12566-7:2013 | Small wastewater treatment systems for up to 50 PT Prefabricated tertiary treatment units |
| PREN 12566-7 : DRAFT 2015 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS |
| NF EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| UNE-EN 12566-7:2017 | Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units |
| S.R. CEN/TR 16184:2011 | CHARACTERIZATION OF WASTE - STATE-OF-THE-ART DOCUMENT - ANALYSIS OF ELUATES |
| UNE-EN 15664-1:2008 | Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation |
| UNE-EN 12566-3:2017 | Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants |
| BS EN 14671:2006 | Characterization of sludges. Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
| BS EN 12566-3 : 2005 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS |
| EN 14671:2006 | Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
| EN 16682:2017 | Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| EN 15664-1:2008+A1:2013 | Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation |
| EN 16070:2014 | Products used for treatment of water intended for human consumption - Natural zeolite |
| EN 16058:2012 | Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of surface coatings with nickel layers - Long-term test method |
| 16/30329428 DC : 0 | BS EN 12566-6 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT |
| 12/30266865 DC : 0 | BS EN 16070 - PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
| UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
| I.S. EN 16070:2014 | PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - NATURAL ZEOLITE |
| S.R. CEN/TS 16177:2012 | SLUDGE, TREATED BIOWASTE AND SOIL - EXTRACTION FOR THE DETERMINATION OF EXTRACTABLE AMMONIA, NITRATE AND NITRITE |
| I.S. EN 12566-6:2016 | SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT |
| DIN EN 16913:2015-10 (Draft) | AMBIENT AIR - STANDARD METHOD FOR MEASUREMENT OF NO[3][-], SO[4][2-], CL[-], NH[4][+], NA[+], K[+], MG[2+], CA[2+] IN PM2,5 AS DEPOSITED ON FILTERS |
| UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| CEN/TR 16269:2011 | Ambient air - Guide for the measurement of anions and cations in PM2,5 |
| DIN EN 14671:2006-09 | Characterization of sludges - Pre-treatment for the determination of extractable ammonia using 2 mol/l potassium chloride |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| EN 25667-1 : 1993 | WATER QUALITY - SAMPLING - GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES |
| ISO 6058:1984 | Water quality — Determination of calcium content — EDTA titrimetric method |
| ISO 7980:1986 | Water quality Determination of calcium and magnesium Atomic absorption spectrometric method |
| ISO 10304-4:1997 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 4: Determination of chlorate, chloride and chlorite in water with low contamination |
| ISO 10304-3:1997 | Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate |
| ISO 6059:1984 | Water quality — Determination of the sum of calcium and magnesium — EDTA titrimetric method |
| ISO 5667-2:1991 | Water quality Sampling Part 2: Guidance on sampling techniques |
| ISO 10304-1:2007 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulfate |
| ISO 5667-3:2012 | Water quality Sampling Part 3: Preservation and handling of water samples |
| ISO 6333:1986 | Water quality Determination of manganese Formaldoxime spectrometric method |
| ISO 10304-2:1995 | Water quality Determination of dissolved anions by liquid chromatography of ions Part 2: Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water |
| ISO 5667-1:2006 | Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques |
| ISO 8466-2:2001 | Water quality — Calibration and evaluation of analytical methods and estimation of performance characteristics — Part 2: Calibration strategy for non-linear second-order calibration functions |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ISO 8466-1:1990 | Water quality Calibration and evaluation of analytical methods and estimation of performance characteristics Part 1: Statistical evaluation of the linear calibration function |
| EN 25667-2 : 1993 | WATER QUALITY - SAMPLING - GUIDANCE ON SAMPLING TECHNIQUES |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.