• There are no items in your cart

EN ISO 1514:2016

Current
Current

The latest, up-to-date edition.

Paints and varnishes - Standard panels for testing (ISO 1514:2016)
Published date

08-17-2016

European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Steel panels
4 Tinplate panels
5 Zinc- and zinc-alloy-coated panels
6 Aluminium panels
7 Coil-coating panels of steel or aluminium
8 Plastics panels
9 Glass-fibre reinforced plastic composite panels (GRP)
10 Carbon-fibre reinforced plastic composite panels (CFRP)
11 Glass panels
12 Hardboard
13 Gypsum plasterboards panels and gypsum boards with
   fibrous reinforcement panels
14 Fibre-reinforced cement panels
Annex A (informative) - General guidelines on preparation of
        steel panels by blast-cleaning
Annex B (informative) - Common substrate panels
Bibliography

ISO 1514:2016 specifies several types of standard panels and describes procedures for their preparation prior to painting. These standard panels are for use in general methods of test for paints, varnishes and related products.

Committee
CEN/TC 139
DevelopmentNote
Supersedes EN 605. (10/2004)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

ISO 4623-1:2000 Paints and varnishes Determination of resistance to filiform corrosion Part 1: Steel substrates
12/30266874 DC BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications
DIN 53150:2002-09 PAINTS AND VARNISHES - DETERMINATION OF THE DRYING STAGE OF COATINGS (MODIFIED BANDOW-WOLFF METHOD)
I.S. EN ISO 4623-1:2002 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
BS EN 12192-2:1999 Products and systems for the protection and repair of concrete structures. Granulometry analysis Test method for fillers for polymer bonding agents
BS EN ISO 1518:2001 Paints and varnishes. Scratch test
BS EN 13062:2003 Products and systems for the protection and repair of concrete structures. Test method. Determination of thixotropy of products for protection of reinforcement
EN 12192-2:1999 Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 2: Test method for fillers for polymer bonding agents
I.S. EN ISO 3231:1998 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE
PREN 1871 : DRAFT 2012 ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
ISO 2815:2003 Paints and varnishes Buchholz indentation test
DIN EN 858-1:2002-05 CONTINUOUS HANDLING EQUIPMENT AND SYSTEMS - PART 1: SAFETY AND EMC REQUIREMENTS FOR THE EQUIPMENT FOR THE STORAGE OF BULK MATERIALS IN SILOS, BUNKERS, BINS AND HOPPERS
DIN EN 13062:2003-09 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF THIXOTROPY OF PRODUCTS FOR PROTECTION OF REINFORCEMENT
VDI/VDE 2616 Blatt 2:2014-07 Hardness testing of plastics and elastomers
VDI 3958 Blatt 13:2014-08 Environmental simulation - Tropicalisation of paint coatings for outdoor use - Test methods
EN IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials - Part 3-11: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - Method for impregnation and coating materials
BS EN IEC 62631-3-11:2018 Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC methods). Volume resistance and volume resistivity. Method for impregnation and coating materials
I.S. EN IEC 62631-3-11:2018 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-11: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - METHOD FOR IMPREGNATION AND COATING MATERIALS
I.S. EN 60464-2:2002 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN ISO 3668:2001 Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998)
DIN EN ISO 2815:2003-10 PAINTS AND VARNISHES - BUCHHOLZ INDENTATION TEST
DIN EN ISO 7253:2002-04 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
BS 3900-F20(2004) : 2004 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 2: ALUMINIUM SUBSTRATES
ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
BS EN ISO 3668:2001 Paints and varnishes. Visual comparison of the colour of paints
BS EN 10301:2003 Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
BS EN ISO 7253:2001 Paints and varnishes. Determination of resistance to neutral salt spray (fog)
EN 858-1:2002/A1:2004 SEPARATOR SYSTEMS FOR LIGHT LIQUIDS (E.G. OIL AND PETROL) - PART 1: PRINCIPLES OF PRODUCT DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
EN ISO 1518:2000 Paints and varnishes - Scratch test (ISO 1518:1992)
EN ISO 3231:1997 Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993)
EN ISO 2815:2003 Paints and varnishes - Buchholz indentation test (ISO 2815:2003)
EN ISO 7253 : 2001 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO NEUTRAL SALT SPRAY (FOG)
EN 1825-1:2004/AC:2006 GREASE SEPARATORS - PART 1: PRINCIPLES OF DESIGN, PERFORMANCE AND TESTING, MARKING AND QUALITY CONTROL
I.S. EN ISO 1518:2000 PAINTS AND VARNISHES - SCRATCH TEST
11/30233262 DC : 0 BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS
BS EN ISO 4623-1:2002 Paints and varnishes. Determination of resistance to filiform corrosion Steel substrates
EN ISO 4623-1:2002 Paints and varnishes - Determination of resistance to filiform corrosion - Part 1: Steel substrates (ISO 4623-1:2000)
BS EN ISO 2815:2003 Paints and varnishes. Buchholz indentation test
ISO 7253:1996 Paints and varnishes — Determination of resistance to neutral salt spray (fog)
BS EN 1825-1:2004 Grease separators Principles of design, performance and testing, marking and quality control
BS EN 858-1:2002 Separator systems for light liquids (e.g. oil and petrol) Principles of product design, performance and testing, marking and quality control
EN 10301:2003 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN 13062:2003 Products and systems for the protection and repair of concrete structure - Test method - Determination of thixotropy of products for protection of reinforcement
DIN EN 10301:2004-01 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
DIN EN 1825-1:2004-12 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004
BS 3900-E10(2003) : 2003 PAINTS AND VARNISHES - PULL-OFF TEST FOR ADHESION
BS 3900-F13(2002) : 2002 PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO FILIFORM CORROSION - PART 1: STEEL SUBSTRATES
BS 3900-E4(2001) : 2001 PAINTS AND VARNISHES - CUPPING TEST
BS 3900-E1(2002) : 2002 PAINTS AND VARNISHES - BEND TEST (CYLINDRICAL MANDREL)

EN 520:2004+A1:2009 Gypsum plasterboards - Definitions, requirements and test methods
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
ISO 8501-1:2007 Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
ISO 2808:2007 Paints and varnishes Determination of film thickness
EN 13523-0:2014 Coil coated metals - Test methods - Part 0: General introduction
EN 1396:2015 Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
EN 16245-1:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
EN 10205:2016 Cold reduced tinmill products - Blackplate
EN 15283-2:2008+A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards
EN 13523-22:2017 Coil coated metals - Test methods - Part 22: Colour difference - Visual comparison
EN 13523-1:2017 Coil coated metals - Test methods - Part 1: Film thickness
ISO 8336:2017 Fibre-cement flat sheets — Product specification and test methods
ISO 11949:2016 Cold-reduced tinmill products Electrolytic tinplate
ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
ISO 2409:2013 Paints and varnishes Cross-cut test

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.