EN ISO 15614-12:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2014)
Superseded date
11-06-2021
Published date
07-02-2014
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Preliminary welding procedure
specification (PWPS)
5 Welding procedure test
6 Test piece
7 Examination and testing
8 Range of qualification
9 Welding procedure qualification
record form (WPQR)
Bibliography
ISO 15614-12:2014 specifies the tests which can be used for qualification of welding procedure specifications for spot, seam, and projection welding processes. It is part of the ISO 15614 series, details of which are given in ISO 15607, Annex A. ISO 15614-12:2014 defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by it.
| Committee |
CEN/TC 121
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN ISO 15614-12 : 2014 | Identical |
| SS-EN ISO 15614-12 : 2014 | Identical |
| NS EN ISO 15614-12 : 2014 | Identical |
| BS EN ISO 15614-12:2014 | Identical |
| SN EN ISO 15614-12 : 2014 | Identical |
| I.S. EN ISO 15614-12:2014 | Identical |
| UNI EN ISO 15614-12 : 2014 | Identical |
| ISO 15614-12:2014 | Identical |
| NEN EN ISO 15614-12 : 2014 | Identical |
| UNE-EN ISO 15614-12:2015 | Identical |
| NF EN ISO 15614-12 : 2014 | Identical |
| NBN EN ISO 15614-12 : 2014 | Identical |
| PN EN ISO 15614-12 : 2014 | Identical |
| DIN EN ISO 15614-12:2014-10 | Identical |
| 13/30263186 DC : 0 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
| 15/30324370 DC : 0 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
| EN 15085-3:2007/AC:2009 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| I.S. EN 15085-3:2007 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| 04/30127156 DC : DRAFT DEC 2004 | EN ISO 17660-2 - WELDING - WELDING OF REINFORCING STEEL - PART 2: NON-LOAD BEARING WELDED JOINTS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 3-8 : 2007 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| BS EN 3-8:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
| UNI EN 15085-3 : 2008 | RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 3: DESIGN REQUIREMENTS |
| BIS IS 16003 : 2012 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
| PREN 3-8 : DRAFT 2015 | PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
| SN EN ISO 15611 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON PREVIOUS WELDING EXPERIENCE (ISO 15611:2003) |
| DIN EN 15085-3:2010-01 | Railway applications - Welding of railway vehicles and components - Part 3: Design requirements |
| DIN EN 3-8:2015-07 (Draft) | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| BS EN 15085-3:2007 | Railway applications. Welding of railway vehicles and components Design requirements |
| 04/30127152 DC : DRAFT DEC 2004 | EN ISO 17660-1 - WELDING - WELDING OF REINFORCING STEEL - PART 1: LOAD BEARING WELDED JOINTS |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 3-8:2006/AC:2007 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| 06/30100042 DC : DRAFT APR 2006 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION - RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| I.S. EN 3-8:2006 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| ISO 14270:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
| ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
| ISO 14732:2013 | Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials |
| ISO 14272:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds |
| ISO 14273:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds |
| ISO 17653:2012 | Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds |
| ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
| ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| ISO 17677-1:2009 | Resistance welding Vocabulary Part 1: Spot, projection and seam welding |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.