• There are no items in your cart

EN ISO 16228:2018

Current
Current

The latest, up-to-date edition.

Fasteners - Types of inspection documents (ISO 16228:2017)
Published date

02-07-2018

European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Inspection
5 Requirements for fastener inspection
  documents
6 Required content for each type of fastener
  inspection document
7 Amendment to inspection documents
8 Transmission of inspection documents
Annex A (informative) - Examples of inspection
        documents
Annex B (informative) - Code numbers applicable
        to fasteners
Bibliography

ISO 16228:2017 specifies the different types of fastener inspection documents issued by the fastener manufacturer or distributor and/or by the external authorized representative on specific request of the purchaser at the time of the order.- declaration of compliance (F2.1);- test reports (F2.2, F3.1 and F3.2).NOTE The term "certificate" is in common use, however for fastener inspection documents the terminology to be used is "test report".ISO 16228:2017 specifies requirements for the content of each fastener inspection document, in conjunction with the order, the relevant standards and/or specified requirements.ISO 16228:2017 is applicable to finished fasteners such as bolts, screws, studs, nuts, washers, pins, rivets, etc. made of steel, stainless steel, non-ferrous metal or non-metallic material.ISO 16228:2017 does not apply to special-purpose or specially engineered applications requiring other types of procedures (e.g. initial samples).Examples of inspection documents are given in Annex A. An example of a coding system identifying the sections in fastener inspection documents is given in Annex B.

Committee
CEN/TC 185
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

ISO 16047:2005 Fasteners — Torque/clamp force testing
ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
ISO 10683:2014 Fasteners Non-electrolytically applied zinc flake coatings
ISO 10684:2004 Fasteners — Hot dip galvanized coatings
ISO 4042:1999 Fasteners Electroplated coatings
ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
ISO 6157-3:1988 Fasteners Surface discontinuities Part 3: Bolts, screws and studs for special requirements
ISO 4759-1:2000 Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
ISO 6157-1:1988 Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
ISO 14589:2000 Blind rivets Mechanical testing
ISO 2320:2015 Fasteners Prevailing torque steel nuts Functional properties
ISO 16426:2002 Fasteners — Quality assurance system
ISO 10666:1999 Drilling screws with tapping screw thread — Mechanical and functional properties
EN 10168:2004 Steel products - Inspection documents - List of information and description
ISO 225:2010 Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions
ISO 4032:2012 Hexagon regular nuts (style 1) — Product grades A and B
ISO 15330:1999 Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method
ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
ISO 3506-3:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
ISO 15977:2002 Open end blind rivets with break pull mandrel and protruding head — AIA/St
ISO 3506-4:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws
ISO 7089:2000 Plain washers Normal series Product grade A
ISO 3800:1993 Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results
ISO 10474:2013 Steel and steel products — Inspection documents
EN 10204:2004 Metallic products - Types of inspection documents
ISO 9001:2015 Quality management systems — Requirements
ISO 6157-2:1995 Fasteners Surface discontinuities Part 2: Nuts
ISO/TR 6306:1989 Chemical analysis of steel Order of listing elements
ISO 2702:2011 Heat-treated steel tapping screws — Mechanical properties
ISO 3506-2:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts
ISO 3269:2000 Fasteners Acceptance inspection
ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread
ISO 4014:2011 Hexagon head bolts Product grades A and B

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.