• There are no items in your cart

EN ISO 18265:2013

Current
Current

The latest, up-to-date edition.

Metallic materials - Conversion of hardness values (ISO 18265:2013)
Published date

10-02-2013

Foreword
Introduction
1 Scope
2 Principles of conversion
3 Application of conversion tables
Annex A (informative) - Conversion table for unalloyed, low
        alloy steels and cast steel
Annex B (informative) - Conversion tables for steels for
        quenching and tempering
Annex C (informative) - Conversion tables for steels for
        cold working
Annex D (informative) - Conversion tables for high speed steels
Annex E (informative) - Conversion tables for hardmetals
Annex F (informative) - Conversion tables for non-ferrous
        metals and alloys
Annex G (informative) - Conversion tables for tool steels
Annex H (informative) - Remarks on the effect of the changed
        test conditions
Bibliography

ISO 18265:2013 specifies the principles of the conversion of hardness values to equivalent values in other hardness scales and to estimates of tensile strength. It gives general information on the use of the conversion tables.The conversion tables in Annexes A to G apply to unalloyed and low alloy steels and cast steel, steels for quenching and tempering, steels for cold working, high speed steels, tool steels, hardmetals, and non-ferrous metals and alloys.Annex H gives information about the effects of changes of the test procedure in the standards specifying the hardness tests.Converted values obtained using ISO 18265:2013 are only directly applicable to the exact material tested. For all other materials, they provide an indicator only. In all cases, the converted values are not intended as replacements for values obtained by the correct standard method. In particular, tensile strength estimates are the least reliable converted values in ISO 18265:2013.

Committee
CEN/TC 459/SC 1
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

09/30185939 DC : 0 BS EN 12513 - FOUNDING - ABRASION RESISTANT CAST IRONS
12/30265276 DC : 0 BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
I.S. EN 4632-004:2012 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS
UNE-EN 12513:2011 Founding - Abrasion resistant cast irons
EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
DIN EN 13001-3-3:2015-02 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
EN 12513:2011 Founding - Abrasion resistant cast irons
EN 10083-2:2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
BS EN 4632-004:2012 Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of high alloyed steels
UNE-EN 13001-3-3:2015 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
BS EN 13001-3-3:2014 Cranes. General design Limit states and proof of competence of wheel/rail contacts
PREN 12513 : DRAFT 2009 FOUNDING - ABRASION RESISTANT CAST IRONS
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
DIN EN 12513:2011-05 Founding - Abrasion resistant cast irons
I.S. EN 10083-2:2006 STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS
I.S. EN 12513:2011 FOUNDING - ABRASION RESISTANT CAST IRONS
VDI 3388:2012-03 Materials for trimming and forming dies
VDI 2737 : 2016 COR 2018 CALCULATION OF THE LOAD CAPACITY OF THE TOOTH ROOT IN INTERNAL TOOTHINGS WITH INFLUENCE OF THE GEAR RIM
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
DIN EN 13001-3-3 E : 2015 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS
UNI EN 12513 : 2011 Founding - Abrasion resistant cast irons
NFL 06 380-22 : 2005 WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 22: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
BS EN 12513:2011 Founding. Abrasion resistant cast irons
BS EN 10083-2:2006 Steels for quenching and tempering Technical delivery conditions for non alloy steels
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN 4632-004:2012 Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels
PREN 10253-2 : DRAFT 2017 BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS
UNI EN 4632-004 : 2014 AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS
PREN 4632-004 : 200P1 WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
05/30132598 DC : DRAFT APR 2005 EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS
08/30195539 DC : 0 BS EN 4632-004 - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS
I.S. EN 13001-3-3:2014 CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS

ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
ISO 6507-2:2005 Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines
ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
ISO 4957:1999 Tool steels
ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ISO 6508-2:2015 Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters
ISO 4964:1984 Steel Hardness conversions
EN 10083-1:2006 Steels for quenching and tempering - Part 1: General technical delivery conditions
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ISO/TR 10108:1989 Steel Conversion of hardness values to tensile strength values
DIN 17200:1987-03 STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.