EN ISO 23277:2015
Current
Current
The latest, up-to-date edition.
Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015)
Published date
03-11-2015
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Testing parameters
5 Acceptance levels
Annex A (informative) - Recommended testing parameters
ISO 23277:2015 specifies acceptance levels for indications from surface breaking imperfections in metallic welds detected by penetrant testing. The acceptance levels are primarily intended for use during manufacture examination, but where appropriate, they can be used for in-service inspection.The acceptance levels in ISO 23277:2015 are based on detection capabilities that can be expected when using techniques specified in ISO 3452 series and parameters recommended in annex. The acceptance levels can be related to welding standards, application standards, specifications, or codes. Such a relationship is shown in ISO 17635 for ISO 5817 and ISO 10042.Acceptance levels for grouped indications are not covered by ISO 23277:2015.
| Committee |
CEN/TC 121
|
| DevelopmentNote |
Supersedes EN 1289. (12/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN ISO 23277 : 2015 | Identical |
| UNE-EN ISO 23277:2015 | Identical |
| NEN EN ISO 23277 : 2015 | Identical |
| ISO 23277:2015 | Identical |
| NF EN ISO 23277 : 2015 | Identical |
| BS EN ISO 23277:2015 | Identical |
| PN EN ISO 23277 : 2015 | Identical |
| I.S. EN ISO 23277:2015 | Identical |
| SN EN ISO 23277:2015 | Identical |
| UNI EN ISO 23277 : 2010 | Identical |
| NBN EN ISO 23277 : 2015 | Identical |
| UNI EN ISO 23277:2015 | Identical |
| DIN EN ISO 23277:2015-06 | Identical |
| 14/30294476 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| 16/30326248 DC : 0 | BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| 13/30259076 DC : 0 | BS EN 13445-8 - UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 16/30336440 DC : DRAFT MAR 2016 | BS EN 1092-1 - FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| PREN 14141 : DRAFT 2011 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
| PREN 14276-2 : DRAFT 2017 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| I.S. EN 16725:2016 | RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
| NF EN 12542 : 2011 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| I.S. EN 448:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| DIN EN 12732:2014-07 | Gas infrastructure - Welding steel pipework - Functional requirements (includes Amendment A1:2014) |
| DIN EN 12952-6:2011-10 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| UNE-EN 12542:2011 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| BS EN 14141:2013 | Valves for natural gas transportation in pipelines. Performance requirements and tests |
| EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| UNI EN 12732 : 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| 11/30253901 DC : 0 | BS EN 13445-5 - UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| BS EN 13445-8 : 2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| UNE-EN 12952-6:2012 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| UNE-EN 14141:2014 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| I.S. EN 12542:2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| DIN EN 12542:2010-12 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| I.S. EN 12952-6:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 12732:2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| I.S. EN 14141:2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| DIN EN 14420-4:2013-09 | Hose fittings with clamp units - Part 4: Flange connections |
| I.S. EN 14420-4:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| DIN EN 12732:2000-09 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| NF EN 14276-2 : 2007 + A1 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| 12/30260023 DC : 0 | BS EN 13480-8 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| 16/30342040 DC : 0 | BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION |
| I.S. EN 13445-8:2014 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| PREN 13480-8 : DRAFT 2012 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN 12542 : DRAFT 2016 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE |
| UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| DIN EN 448:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 14276-2:2011-05 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| DIN EN 14141:2013-08 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNI EN 12542 : 2010 | LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE |
| UNI EN 14276-2 : 2011 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNI EN 14141 : 2013 | VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| UNI EN 12952-6 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 6: INSPECTION DURING CONSTRUCTION; DOCUMENTATION AND MARKING OF PRESSURE PARTS OF THE BOILER |
| UNI EN 14420-4 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 4: FLANGE CONNECTIONS |
| BS EN 16725:2016 | Railway applications. Track. Restoration and repair of manganese crossings |
| PREN 12972 : DRAFT 2017 | TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| 15/30331867 DC : 0 | BS EN ISO 10855-3 - OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING |
| EN 1092-1:2018 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges |
| UNI EN 1092-1 : 2013 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| 17/30360691 DC : 0 | BS EN 12972 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - TESTING, INSPECTION AND MARKING OF METALLIC TANKS |
| EN 13445-8 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| 17/30351221 DC : 0 | BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| EN 12480:2018 | Gas meters - Rotary displacement gas meters |
| I.S. EN 12480:2018 | GAS METERS - ROTARY DISPLACEMENT GAS METERS |
| I.S. EN 1092-1:2007 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES,FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| BS EN 12542:2010 | LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m<sup>3</sup>. Design and manufacture |
| BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
| BS EN 14276-2 : 2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| I.S. EN 14276-2:2007 | PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| BS EN 12952-6:2011 | Water-tube boilers and auxiliary installations Inspection during construction; documentation and marking of pressure parts of the boiler |
| EN 14276-2:2007+A1:2011 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| BS EN 14420-4:2013 | Hose fittings with clamp units Flange connections |
| BS EN 12732 : 2013 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| UNE-EN 12732:2014+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| UNE-EN 448:2017 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 14420-4:2013 | Hose fittings with clamp units - Part 4: Flange connections |
| EN 16725:2016 | Railway applications - Track - Restoration and repair of manganese crossings |
| EN 14141:2013 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| UNE-EN 16725:2017 | Railway applications - Track - Restoration and repair of manganese crossings |
| 11/30248438 DC : 0 | BS EN 14141 - VALVES FOR NATURAL GAS TRANSPORTATION IN PIPELINES - PERFORMANCE REQUIREMENTS AND TESTS |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| 14/30258527 DC : 0 | BS EN 16725 - RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
| UNE-EN 14276-2:2008 | Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements |
| PREN 13445-8 : DRAFT 2013 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| PREN 13445-5 : DRAFT 2011 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| PREN 448 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| 18/30368651 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| UNE-EN 13445-8:2015 | Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys |
| UNI EN 13445-8 : 2015 | UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS |
| BS EN 448:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 12952-6:2011 | Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; documentation and marking of pressure parts of the boiler |
| EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| UNE-EN 12732:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| ISO 10042:2005 | Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
| ISO/TS 18173:2005 | Non-destructive testing General terms and definitions |
| ISO 12706:2009 | Non-destructive testing Penetrant testing Vocabulary |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.