EN ISO 4892-1:2016
Current
Current
The latest, up-to-date edition.
Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016)
Published date
05-18-2016
Publisher
ISO 4892-1:2016 provides information and general guidance relevant to the selection and operation of the methods of exposure described in detail in subsequent parts. It also describes general performance requirements for devices used for exposing plastics to laboratory light sources. Information regarding performance requirements is for producers of artificial accelerated weathering or artificial accelerated irradiation devices.NOTE In this part of ISO 4892, the term "light source" refers to radiation sources that emit UV radiation, visible radiation, infrared radiation or any combination of these types of radiation.ISO 4892-1:2016 also provides information on the interpretation of data from artificial accelerated weathering or artificial accelerated irradiation exposures. More specific information about methods for determining the change in the properties of plastics after exposure and reporting these results is given in ISO 4582.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 4892-1:2001-09 | Identical |
| NS EN ISO 4892-1 : 2000 | Identical |
| NBN EN ISO 4892-1 : 2016 | Identical |
| UNI EN ISO 4892-1 : 2002 | Identical |
| DIN EN ISO 4892-1:2016-10 | Identical |
| ISO 4892-1:2016 | Identical |
| SN EN ISO 4892-1:2016 | Identical |
| SS-EN ISO 4892-1:2016 | Identical |
| UNE-EN ISO 4892-1:2017 | Identical |
| BS EN ISO 4892-1:2016 | Identical |
| UNI EN ISO 4892-1:2016 | Identical |
| NEN EN ISO 4892-1 : 2016 | Identical |
| SN EN ISO 4892-1 : 2001 | Identical |
| I.S. EN ISO 4892-1:2016 | Identical |
| NF EN ISO 4892-1 : 2016 | Identical |
| PN EN ISO 4892-1 : 2016 | Identical |
| NF EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| UNE-EN 50620:2017 | Electric cables - Charging cables for electric vehicles |
| PD CEN/TS 16599:2014 | Photocatalysis. Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions |
| 14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DIN EN 16268:2013-04 | PERFORMANCE OF REFLECTING SURFACES FOR LUMINAIRES |
| 08/30189622 DC : 0 | BS EN 10223-8 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 8: WELDED MESH GABION PRODUCTS |
| PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| UNE-EN 16472:2015 | Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
| I.S. EN 16472:2014 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| DIN EN 16472:2014-06 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| 12/30266874 DC | BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications |
| BS EN 15752-1:2014 | Glass in building. Adhesive backed polymeric film Definitions and requirements |
| BS EN 50526-1:2012 | Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters |
| EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| 17/30361211 DC : 0 | BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 62109-1:2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 50526-1 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 17098-1:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| I.S. EN 50618:2014 | ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS |
| BS EN 50539-11 : 2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| I.S. EN 50620:2017 | ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 16306 : 2013 | NATURAL STONE TEST METHODS - DETERMINATION OF RESISTANCE OF MARBLE TO THERMAL AND MOISTURE CYCLES |
| UNE-EN 60099-4:2016 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| 15/30326160 DC : 0 | BS EN 16951-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTIC CHARACTERISTICS |
| UNE-EN 16795:2016 | Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation |
| UNI CEN/TR 15822 : 2010 | PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES |
| I.S. EN 14963:2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13655:2018 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| EN 15534-6:2015+A1:2017 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements |
| EN 1263-1:2014 | Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods |
| EN 60950-22:2017 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| DIN EN 13341:2011-04 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011) |
| DIN EN 13484:2012-05 | Helmets for users of luges |
| DIN EN 12492:2012-04 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 1078:2014-04 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| BS EN 12613:2009 | Plastics warning devices for underground cables and pipelines with visual characteristics |
| BS EN 1873 : 2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS EN 1297:2004 | Flexible sheets for waterproofing. Bitumen, plastic and rubber sheets for roof waterproofing. Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| BS EN 13484:2012 | Helmets for users of luges |
| BS EN 966 : 2012 | HELMETS FOR AIRBORNE SPORTS |
| BS EN ISO 9142:2003 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN 12492:2012 | Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods |
| BS EN 1384:2017 | Helmets for equestrian activities |
| I.S. EN 10223-7:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| I.S. EN 812:2012 | INDUSTRIAL BUMP CAPS |
| EN 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| EN 1078:2012+A1:2012 | Helmets for pedal cyclists and for users of skateboards and roller skates |
| EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 10223-7:2012 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| CEN/TR 581-4:2005 | OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| CEN/TR 15822:2009 | Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 50539-11 : 2013 AMD 1 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN 13341:2005+A1:2011 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| EN 50289-4-17:2015 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| PREN 1871 : DRAFT 2012 | ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 09/30195277 DC : 0 | BS EN 13451-1 - SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| 09/30200407 DC : 0 | BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| BS EN 16268:2013 | Perfomance of reflecting surfaces for luminaires |
| I.S. EN IEC 60099-8:2018 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| 14/30299825 DC : 0 | BS EN 50289-4-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| BS EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories Environmental testing |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| DIN EN 15752-1:2014-10 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS |
| CEI EN 62217 : 2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| 11/30242331 DC : 0 | BS EN 16268 - PERFORMANCE OF REFLECTING SURFACES FOR LUMINAIRES |
| DIN EN 16472 E : 2014 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| PREN 14187-8 : DRAFT 2014 | COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION |
| 15/30316094 DC : DRAFT FEB 2015 | BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| 08/30189607 DC : 0 | BS EN 10223-3 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE NETTING FOR ENGINEERING PURPOSES |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| 14/30311481 DC : 0 | BS EN 14187-8 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| BS EN 50526-2:2014 | Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| 10/30233680 DC : 0 | BS EN 13575 - STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| 16/30345769 DC : 0 | BS EN 927-6 - PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| PREN 13451-1 : DRAFT 2009 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| I.S. EN 16268:2013 | PERFORMANCE OF REFLECTING SURFACES FOR LUMINAIRES |
| EN IEC 60099-8:2018 | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| UNE-CEN/TR 15822:2011 IN | Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues |
| CEI EN 60079-30-1 : 2008 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| I.S. EN 50539-11:2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| I.S. EN 16795:2015 | PLASTICS - METHOD FOR ESTIMATING HEAT BUILD UP OF FLAT SURFACES BY SIMULATED SOLAR RADIATION |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| PREN 513 : DRAFT 2017 | PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| BS EN 927-6:2006 | Paints and varnishes. Coating materials and coating systems for exterior wood Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| UNI EN 15752-1 : 2015 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS |
| CEI EN 60099-4 : 2015 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| BS EN 14836:2005 | Synthetic surfaces for outdoor sports areas. Exposure to artificial weathering |
| EN 927-6:2006 | Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water |
| DIN EN 14836:2015-03 (Draft) | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| UNE-EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
| ISO 11431:2002 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| BS EN 1385:2012 | Helmets for canoeing and white water sports |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| DIN EN 15187 E : 2006 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| I.S. EN 1384:2017 | HELMETS FOR EQUESTRIAN ACTIVITIES |
| I.S. EN 10245-2:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN 12613:2009 | PLASTICS WARNING DEVICES FOR UNDERGROUND CABLES AND PIPELINES WITH VISUAL CHARACTERISTICS |
| EN 12613:2009 | Plastics warning devices for underground cables and pipelines with visual characteristics |
| UNI EN 12613 : 2009 | PLASTICS WARNING DEVICES FOR UNDERGROUND CABLES AND PIPELINES WITH VISUAL CHARACTERISTICS |
| DIN EN ISO 11431:2003-01 | BUILDING CONSTRUCTION - JOINTING PRODUCTS - DETERMINATION OF ADHESION/COHESION PROPERTIES OF SEALANTS AFTER EXPOSURE TO HEAT, WATER AND ARTIFICIAL LIGHT THROUGH GLASS |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 1078:2012 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| DIN EN 1297:2004-12 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water; German version EN 1297:2004 |
| I.S. EN 12492:2012 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 397:2012 | INDUSTRIAL SAFETY HELMETS |
| I.S. EN 1873:2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 1263-1:2014 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| I.S. EN 966:2012 | HELMETS FOR AIRBORNE SPORTS |
| I.S. EN 1385:2012 | HELMETS FOR CANOEING AND WHITE WATER SPORTS |
| I.S. EN 13484:2012 | HELMETS FOR USERS OF LUGES |
| DIN EN 1873:2016-07 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 13341:2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| I.S. EN 10245-3:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| I.S. EN 13575:2012 | STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| VDI 3958 Blatt 10:2012-01 | Environmental simulation - Exposure of materials to gaseous air pollutants |
| VDI 3958 Blatt 11:2009-05 | Environmental simulation - Exposure of polymers to air pollutants in combination with weathering |
| UNI CEN/TS 16599 : 2014 | PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS |
| 12/30258456 DC : 0 | BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 16795:2015 | Plastics. Method for estimating heat build up of flat surfaces by simulated solar radiation |
| UNE-EN 50618:2015 | Electric cables for photovoltaic systems |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| UNI EN 16472 : 2014 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| BS EN 50289-4-17:2015 | Communication cables. Specifications for test methods Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| UNE-EN 15752-1:2015 | Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements |
| BS EN 60099-8:2011 | Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| UNE-EN 16465:2016 | Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| BS EN 16465:2015 | Plastics. Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| 12/30256082 DC : 0 | BS EN 12899-6 - FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 6: PERFORMANCE OF RETROREFLECTIVE SIGN FACE MATERIAL |
| DIN EN 14963 E : 2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| 12/30264391 DC : DRAFT JULY 2012 | BS EN 16465 - PLASTICS - CALIBRATION METHOD OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| 17/30335121 DC : 0 | BS EN 13655 - PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| BS EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria |
| DIN EN 124-6 E : 2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| I.S. EN 50289-4-17:2015 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| 12/30265313 DC : 0 | BS EN 124-6 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE FROM POLYPROPYLENE (PP) OR POLYVINYL-CHLORIDE (PVC-U) |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 08/30180838 DC : DRAFT JUNE 2008 | BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| I.S. EN 61158-2:2014 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION |
| PREN 50289-4-17 : DRAFT 2014 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| I.S. EN 927-6:2006 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50483-6:2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| PREN 50526-1 : DRAFT 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| PREN 13655 : DRAFT 2016 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| EN 17098-1:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
| BS EN 60079-30-1:2017 | Explosive atmospheres Electrical resistance trace heating. General and testing requirements |
| PREN 1384 : DRAFT 2014 | HELMETS FOR EQUESTRIAN ACTIVITIES |
| EN 13655:2018 | Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture |
| I.S. EN 13207:2018 | PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| DIN EN 1385:2012-04 | HELMETS FOR CANOEING AND WHITE WATER SPORTS |
| DIN EN 1384:2015-02 (Draft) | HELMETS FOR EQUESTRIAN ACTIVITIES |
| DIN EN 14187-8:2003-09 | COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION |
| DIN EN 812:2012-04 | INDUSTRIAL BUMP CAPS |
| BS EN 1078 : 2012 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| BS EN 397 : 2012 | INDUSTRIAL SAFETY HELMETS |
| BS EN 10245-3:2011 | Steel wire and wire products. Organic coatings on steel wire PE coated wire |
| UNE-EN 62109-1:2011 | Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements |
| BS EN 14187-8:2017 | Cold applied joint sealants. Test methods Determination of the artificial weathering by UV-irradiation |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| DIN EN 1384:2012-05 | HELMETS FOR EQUESTRIAN ACTIVITIES |
| EN 14836:2005/AC:2007 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 16795:2015 | Plastics - Method for estimating heat build up of flat surfaces by simulated solar radiation |
| UNI EN 15187 : 2007 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| UNI EN 13484 : 2012 | HELMETS FOR USERS OF LUGES |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 10245-3 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| UNI EN 13341 : 2011 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| UNI EN 397 : 2013 | INDUSTRIAL SAFETY HELMETS |
| UNI EN 10223-7 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 10245-2 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| UNI EN 966 : 2013 | HELMETS FOR AIRBORNE SPORTS |
| UNI EN 13575 : 2012 | STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1385 : 2012 | HELMETS FOR CANOEING AND WHITE WATER SPORTS |
| UNI EN 12492 : 2012 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| UNI EN 812 : 2012 | INDUSTRIAL BUMP CAPS |
| UNI EN 1078 : 2013 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| DIN EN 16306:2013-05 | Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles |
| DIN EN 16795:2016-03 | PLASTICS - METHOD FOR ESTIMATING HEAT BUILD UP OF FLAT SURFACES BY SIMULATED SOLAR RADIATION |
| EN 50620:2017 | Electric cables - Charging cables for electric vehicles |
| PREN 927-6 : DRAFT 2016 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 6: EXPOSURE OF WOOD COATINGS TO ARTIFICIAL WEATHERING USING FLUORESCENT UV LAMPS AND WATER |
| UNI EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 08/30180841 DC : DRAFT JUNE 2008 | BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| PREN 10223-3 : DRAFT 2008 | STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR ENGINEERING PURPOSES |
| BS EN 50620:2017 | Electric cables. Charging cables for electric vehicles (BT(DE/NOT)259) |
| 08/30189619 DC : 0 | BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| 03/112830 DC : DRAFT AUG 2003 | BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS |
| DIN EN 16465:2015-12 | PLASTICS - METHODS FOR THE CALIBRATION OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| DIN EN 14836:2006-03 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| BS EN 60099-9:2014 | Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations |
| 03/119348 DC : 0 | PREN 1013-1 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETING FOR INTERNAL AND EXTERNAL ROOFING, WALL CLADDING AND CEILING FINISHES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| 12/30235298 DC : DRAFT JAN 2012 | BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| 14/30290405 DC : 0 | BS EN 1384 - HELMETS FOR EQUESTRIAN ACTIVITIES |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| I.S. EN 16306:2013 | NATURAL STONE TEST METHODS - DETERMINATION OF RESISTANCE OF MARBLE TO THERMAL AND MOISTURE CYCLES |
| BS EN 60950-22:2017 | Information technology equipment. Safety Equipment to be installed outdoors |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| PREN 13207 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| DIN EN 16795 E : 2016 | PLASTICS - METHOD FOR ESTIMATING HEAT BUILD UP OF FLAT SURFACES BY SIMULATED SOLAR RADIATION |
| I.S. EN 62217:2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV)) |
| I.S. EN 60099-8:2011 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| I.S. EN 60950-22:2017 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 50526-1:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 60099-4:2014 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| BS EN 17098-1:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| I.S. CEN TR 581-4:2006 | OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS |
| DIN EN 12613:2009-09 | Plastics warning devices for underground cables and pipelines with visual characteristics; German version EN 12613:2009 |
| DIN EN 966:2013-11 | HELMETS FOR AIRBORNE SPORTS |
| DIN EN 61158-2:2015-02 | INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014) |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN 10223-7:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| DIN EN 1263-1:2015-03 | TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 1: SAFETY REQUIREMENTS, TEST METHODS |
| DIN EN 397:2013-04 | Industrial safety helmets (includes Amendment A1:2012) |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| BS EN 61158-2:2014 | Industrial communication networks. Fieldbus specifications Physical layer specification and service definition |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| UNE-EN 14187-8:2017 | Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation |
| BS EN ISO 11431:2002 | Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| BS EN 10223-7:2012 | Steel wire and wire products for fencing and netting Steel wire welded panels for fencing |
| BS EN 1263-1:2014 | Temporary works equipment. Safety nets Safety requirements, test methods |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| UNE-EN 10245-3:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| UNE-EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| BS EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems General requirements |
| BS EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods |
| UNE-EN 10223-7:2013 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| UNE-EN 1384:2013 | Helmets for equestrian activities |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| UNE-EN 10245-2:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| UNE-EN 1385:2012 | Helmets for canoeing and white water sports |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO 9142:2003 | Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| UNE-EN 12613:2010 | Plastics warning devices for underground cables and pipelines with visual characteristics |
| UNE-EN 1873:2015 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| BS EN 13341 : 2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| UNE-EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 1384:2017 | Helmets for equestrian activities |
| EN 16268:2013 | Perfomance of reflecting surfaces for luminaires |
| EN 14963:2006 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| EN 16472:2014 | Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN 397:2012+A1:2012 | Industrial safety helmets |
| EN 14187-8:2017 | Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation |
| EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN ISO 9142:2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN 16465:2015 | Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN 15187:2006 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| EN ISO 11431 : 2002 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) |
| EN 15752-1 : 2014 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS |
| EN 966:2012+A1:2012 | Helmets for airborne sports |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN 1385:2012 | Helmets for canoeing and white water sports |
| EN 16306:2013 | Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles |
| EN 812:2012 | Industrial bump caps |
| UNE-EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| BS EN 14963:2006 | Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods |
| UNI EN 14836 : 2006 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| 17/30348286 DC : 0 | BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| BS EN 50618:2014 | Electric cables for photovoltaic systems (BT(DE/NOT)258) |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| UNE-EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| 17/30335124 DC : 0 | BS EN 13207 - PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| 14/30311508 DC : 0 | BS EN 16795 - PLASTICS - METHOD FOR ESTIMATING HEAT BUILD UP OF FLAT SURFACES BY SIMULATED SOLAR RADIATION |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| I.S. EN 15752-1:2014 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS |
| BS EN 16472:2014 | Plastics. Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
| 03/109045 DC : DRAFT JUNE 2003 | EN ISO 4892-2 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC SOURCES |
| PREN 14836 : DRAFT 2017 | SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING |
| DIN EN 16465 E : 2015 | PLASTICS - METHODS FOR THE CALIBRATION OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| 14/30294067 DC : 0 | BS EN 15534-6 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND SYSTEMS |
| DIN EN 14836 E : 2006 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| 07/30169818 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 16306:2013 | Natural stone test methods — Determination of resistance of marble to thermal and moisture cycles |
| 17/30351022 DC : 0 | BS EN 14836 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING |
| I.S. EN 15534-6:2015 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND ELEMENTS |
| I.S. EN 60079-30-1:2017 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| 04/30099887 DC : DRAFT MAY 2004 | PREN 14963 - ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| UNE-EN 50289-4-17:2016 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| 11/30233262 DC : 0 | BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| 12/30266179 DC : 0 | BS EN 16472 - PLASTICS - METHOD FOR ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| I.S. EN 16465:2015 | PLASTICS - METHODS FOR THE CALIBRATION OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| I.S. EN 14836:2006 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| S.R. CEN/TS 16599:2014 | PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS |
| CEI EN 50483-6 : 2011 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| BS EN 15534-6 : 2015 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND ELEMENTS |
| S.R. CEN TR 15822:2009 | PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES |
| UNI EN 16268 : 2013 | PERFORMANCE OF REFLECTING SURFACES FOR LUMINARIES |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50526-2:2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| CEI EN 50526-2 : 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| BS EN 60099-4:2014 | Surge arresters Metal-oxide surge arresters without gaps for a.c. systems |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| UNE-EN 16268:2016 | Perfomance of reflecting surfaces for luminaires |
| CEI EN 60099-8 : 2012 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| I.S. CEN TS 15354:2006 | PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION |
| DIN EN 13575:2012-06 | Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| BS EN 812:2012 | Industrial bump caps |
| BS EN 15187:2006 | Furniture. Assessment of the effect of light exposure |
| EN 13484:2012 | Helmets for users of luges |
| EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
| CEN/TS 16599:2014 | Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions |
| DIN EN 10245-2:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
| DIN EN 15187:2006-12 | Furniture - Assessment of the effect of light exposure |
| EN 60099-9:2014 | Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations |
| EN 1297:2004 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| DIN EN 10245-3:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011 |
| CEN/TS 15354:2006 | Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation |
| EN 50618:2014 | Electric cables for photovoltaic systems |
| EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing |
| EN 62109-1 : 2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| UNE-EN 15534-6:2016 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| ISO 3167:2014 | Plastics Multipurpose test specimens |
| ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ASTM G 156 : 2017 : REDLINE | Standard Practice for Selecting and Characterizing Weathering Reference Materials |
| ISO/TR 19032:2006 | Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
| ISO 294-2:1996 | Plastics Injection moulding of test specimens of thermoplastic materials Part 2: Small tensile bars |
| ISO 4892-3:2016 | Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 294-1:2017 | Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens |
| ASTM G 130 : 2012 : REDLINE | Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.