EN ISO 868:2003
Current
Current
The latest, up-to-date edition.
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
Published date
03-01-2003
Publisher
1 Scope
2 Normative reference
3 Principle
4 Apparatus
5 Test specimens
6 Calibration
7 Conditioning and testing atmospheres
8 Procedure
9 Test report
ISO 868:2003 specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials. The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both.This method is an empirical method intended primarily for control purposes. No simple relationship exists between indentation hardness determined by this method and any fundamental property of the material tested. For specification purposes, it is recommended that ISO 48, Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD), be used for the softer materials.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 868:2003-10 | Identical |
| NF EN ISO 868 : 2003 | Identical |
| ISO 868:2003 | Identical |
| NBN EN ISO 868 : 2003 | Identical |
| NEN EN ISO 868 : 2003 | Identical |
| NS EN ISO 868 : 2ED 2003 | Identical |
| I.S. EN ISO 868:2003 | Identical |
| PN EN ISO 868 : 2005 | Identical |
| SN EN ISO 868 : 2003 | Identical |
| UNI EN ISO 868 : 2005 | Identical |
| UNE-EN ISO 868:2003 | Identical |
| BS EN ISO 868:2003 | Identical |
| DIN EN ISO 868 E : 2003 | Identical |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| BS EN 62444:2013 | Cable glands for electrical installations |
| UNE-EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| UNE-EN 16261-3:2014 | Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
| UNE-EN 50290-2-29:2016 | Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables |
| BS EN 16256-5:2012 | Pyrotechnic articles. Theatrical pyrotechnic articles Test methods |
| I.S. EN 10329:2006 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| I.S. EN 14035-22:2004 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
| 02/121901 DC : DRAFT MAY 2002 | BS EN 14035-24 - FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
| 09/30201918 DC : 0 | BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
| BS EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing |
| 02/123857 DC : DRAFT OCT 2002 | BS EN 14035-17 - FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| UNE-EN 50290-2-33:2016 | Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
| 07/30160665 DC : 0 | BS EN 12790 - CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| DIN EN 16265:2016-05 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
| I.S. EN 14035-13:2004 | FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14035-35:2004 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14035-23:2003 | FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
| CEI EN 50290-2-25 : 2014 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
| 02/123860 DC : DRAFT OCT 2002 | BS EN 14035-32 - FIREWORKS - PART 32: SNAPS - SPECIFICATION AND TEST METHODS |
| PREN 1504-2 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| DD CEN/TS 15185:2005 | Furniture. Assessment of the surface resistance to abrasion |
| DIN EN 16263-4:2015-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
| 02/123855 DC : DRAFT OCT 2002 | BS EN 14035-14 - FIREWORKS - PART 14: FLYING SQUIB - SPECIFICATION AND TEST METHODS |
| CEI EN 50290-2-29 : 2002 | COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
| DIN EN 13832-2:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| PD EN 14035-8:2004 | Fireworks Bengal sticks. Specification and test methods |
| 10/30216993 DC : 0 | BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| DIN EN 16256-5:2013-03 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
| I.S. EN 61076-7-100:2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| CEI 20-95 : 2010 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| CEI EN 61076-7-100 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| CEI EN 60544-2 : 2013 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST |
| CEI EN 50290-2-33 : 1ED 2017 | COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE) |
| DIN EN 13832-3:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| DIN EN 124-1 E : 2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| BS EN 15651-3:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for sanitary joints |
| ONORM EN 13832-1 : 2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| I.S. EN 61215-2:2017 | TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES |
| I.S. CEN TS 15185:2006 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| I.S. EN 60684-3-214:2014 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
| EN 61215-2 : 2017 COR 2018 | TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES (IEC 61215-2:2016/COR1:2018) |
| I.S. EN 50290-2-35:2016 | COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
| ONORM EN 13832-3 : 2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| BS EN 50548 : 2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| I.S. EN 15651-4:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| I.S. EN 62631-3-1:2016 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-1: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - GENERAL METHOD |
| CEI EN 60684-3-247 : 2012 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
| I.S. EN 14035-5:2006 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
| I.S. HD 631.2:2007 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| HD 631.2 : 2007 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS |
| I.S. EN 50548:2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories |
| 17/30359554 DC : 0 | BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| I.S. EN 50655-1:2017 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 16/30347811 DC : 0 | BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
| UNE-EN 15651-4:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways |
| I.S. EN 50290-2-23:2013 | COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
| DIN EN 13121-1:2003-10 | GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions |
| DIN EN 71-4:2013-05 | Safety of toys - Part 4: Experimental sets for chemistry and related activities |
| DIN EN 1504-2:2015-03 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| EN 13121-1:2003 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 14035-6:2004 | Fireworks Bengal flames. Specification and test methods |
| BS EN 14035-35:2004 | Fireworks Throwdowns. Specification and test methods |
| BS EN 295-3:2012 | Vitrified clay pipe systems for drains and sewers Test methods |
| BS EN 13893:2002 | Resilient, laminate and textile floor coverings. Measurement of dynamic coefficient of friction on dry floor surfaces |
| BS EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components |
| DIN EN 14035-35:2005-02 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
| DIN EN 14782:2006-03 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| CEN/TS 16354:2013 | Laminate floor coverings - Underlays - Specification, requirements and test methods |
| EN 61076-7-100 : 2006 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM |
| EN 62444 : 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| EN 10310:2003 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| EN 50290-2-37:2016 | Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| CEN/TS 15185 : 2005 | FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION |
| EN 50290-2-29:2016 | Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| EN 50655-1:2017 | Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN 12488:2016 | Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing |
| EN 50290-2-25:2013 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
| EN 12790:2009 | Child use and care articles - Reclined cradles |
| EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components |
| DIN EN 15189:2007-02 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| I.S. EN 14865-2:2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| EN 50368:2003 | Cable cleats for electrical installations |
| DIN EN 13696:2009-02 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| DIN EN 14035-10:2004-11 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
| 07/30161873 DC : 0 | EN 15651-4 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| UNE-EN 50290-2-23:2014 | Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
| I.S. EN 14035-24:2004 | FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
| I.S. EN 15651-2:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| 07/30149374 DC : 0 | BS EN 15673-1 - DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHOD OF EVALUATION - PART 1: REFERENCE METHOD |
| DIN EN 14035-31:2006-01 | FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
| I.S. EN 62790:2015 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
| 07/30161895 DC : 0 | BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 14035-27:2003 | FIREWORKS - PART 27: ROCKETS - SPECIFICATION AND TEST METHODS |
| CEI EN 62217 : 2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| BS EN 50290-2-23:2013 | Communication cables Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables |
| 02/123859 DC : DRAFT OCT 2002 | BS EN 14035-20 - FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14035-7:2004 | FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
| BS EN 50180-2:2015 | Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components |
| PD EN 14035-3:2004 | Fireworks Aerial wheels. Specification and test methods |
| I.S. EN 16523-1:2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| DIN EN 15651-3:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| CEI EN 50290-2-35 : 1ED 2017 | COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| I.S. EN 62444:2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD)) |
| PREN 62444 : DRAFT 2013 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED) |
| I.S. EN 50180-2:2015 | BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| BS EN 62631-3-1:2016 | Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method |
| DIN EN 15651-1:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| BS EN 61076-7-100:2006 | Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system |
| DIN EN 16264:2014-11 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| PREN 50655-1 : DRAFT 2015 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 09/30200146 DC : 0 | BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR |
| DIN EN 16028:2012-10 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| DIN EN 15651-4:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| 15/30297361 DC | BS ISO 26261-3. Fireworks. Category 4. Part 3. Test methods |
| S.R. CEN/TS 16165:2016 | DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION |
| PD EN 14035-13:2004 | Fireworks Flash pellets. Specification and test methods |
| 04/30095724 DC : DRAFT APR 2004 | EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND TEST METHODS |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| I.S. EN 14035-31:2005 | FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
| UNE-EN 50290-2-25:2014 | Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds |
| I.S. EN 50290-2-29:2016 | COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
| 02/123852 DC : DRAFT OCT 2002 | BS EN 14035-9 - FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
| 03/319405 DC : DRAFT NOV 2003 | BS EN 14035-37 - FIREWORKS - PART 37: WHISTLERS - SPECIFICATION AND TEST METHODS |
| 04/30123591 DC : DRAFT OCT 2004 | EN 15062 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| DIN EN 71-13:2014-07 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
| I.S. EN 50290-2-37:2016 | COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
| UNE-EN 16264:2015 | Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools |
| UNI EN 71-4 : 2013 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
| CEI EN 50290-2-37 : 1ED 2017 | COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
| I.S. EN 124-1:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 50290-2-33:2016 | COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE) |
| EN 13832-1:2006 | Footwear protecting against chemicals - Part 1: Terminology and test methods |
| CEI EN 60455-3-8 : 2014 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES |
| DIN EN 16523-2 E : 2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| CEI EN 50290-2-38 : 1ED 2017 | COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES |
| I.S. EN 12488:2016 | GLASS IN BUILDING - GLAZING RECOMMENDATIONS - ASSEMBLY PRINCIPLES FOR VERTICAL AND SLOPING GLAZING |
| PREN 16354 : DRAFT 2016 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 14035-3:2004 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
| BS EN 15947-4 : 2016 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
| 16/30333219 DC : 0 | BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| EN 16523-2:2015 | Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact |
| I.S. EN 16028:2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| CEI EN 62444 : 2014 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| EN 13832-2:2006 | Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions |
| DIN EN 14879-4 E : 2008 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 4: LININGS ON METALLIC COMPONENTS |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN 14879-5 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 5: LININGS ON CONCRETE COMPONENTS |
| I.S. EN 13121-1:2003 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS |
| DIN EN 15434 E : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| DIN EN 15346 E : 2015 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| DIN EN 14294:2010-06 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| DIN EN 14782:2015-09 (Draft) | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 14354:2005-03 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| BS EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
| BS EN 12790:2009 | Child use and care articles. Reclined cradles |
| BS EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements |
| BS EN 15307:2014 | Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements |
| BS EN 71-4:2013 | Safety of toys Experimental sets for chemistry and related activities |
| I.S. EN 15346:2014 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| DIN EN 14035-24:2004-11 | FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-12:2003-09 | FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| I.S. EN 12790:2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| I.S. EN 71-4:2013 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
| DIN EN 14035-25:2006-01 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 10245-2:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| DIN EN 14035-28:2004-11 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| DIN EN 14035-34:2003-09 | FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-22:2004-11 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-8:2004-11 | FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-23:2003-09 | FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-7:2004-11 | FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 295-3:2012 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS |
| DIN EN 14035-6:2004-11 | FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
| I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
| DIN EN 14035-27:2003-09 | FIREWORKS - PART 27: ROCKETS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-9:2004-11 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-5:2006-05 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
| I.S. EN 15307:2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| EN 71-4:2013 | Safety of toys - Part 4: Experimental sets for chemistry and related activities |
| DIN EN 14035-3:2004-11 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14354:2017 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| DIN EN 14035-15:2003-09 | FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS |
| I.S. EN 15468:2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 14294:2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
| DIN EN 14035-4:2003-09 | FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| I.S. EN 295-4:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| DIN EN 13832-1:2006-11 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| DIN EN 14035-19:2003-09 | FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 15434:2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| DIN EN 14035-38:2006-05 | FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| VDI 2083 Blatt 9.2:2017-01 | Cleanroom technology - Consumables in the cleanroom |
| BS 7933-1:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds |
| UNE-EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
| UNE-EN 71-13:2015 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
| DIN EN 71-13 E : 2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
| BS EN 50617-1:2015 | Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits |
| I.S. EN 14035-28:2004 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
| BS EN 50290-2-38:2016 | Communication cables Common design rules and construction. Polypropylene insulation for coaxial cables |
| 15/30325650 DC : 0 | BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 03/319403 DC : DRAFT NOV 2003 | BS EN 14035-31 - FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
| BS EN 50290-2-33:2016 | Communication cables Common design rules and construction. Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
| I.S. EN 14035-25:2005 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14035-15:2003 | FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS |
| 13/30281390 DC : 0 | BS EN 50290-2-25 - COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
| UNE-EN 15651-1:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
| BS EN 60455-3-8:2013 | Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories |
| BS EN 62790:2015 | Junction boxes for photovoltaic modules. Safety requirements and tests |
| 09/30214460 DC : 0 | BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| I.S. EN 16261-3:2012 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 3: TEST METHODS |
| BS EN 16263-4:2015 | Pyrotechnic articles. Other pyrotechnic articles Test methods |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| BS EN 16265:2015 | Pyrotechnic articles. Other pyrotechnic articles. Ignition devices |
| PD EN 14035-21:2005 | Fireworks Jumping ground spinners. Specification and test methods |
| 15/30313584 DC : 0 | BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 14035-34:2003 | FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS |
| 08/30180847 DC : DRAFT JUNE 2008 | BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| BS EN 60544-2:2012 | Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test |
| 16/30336762 DC : 0 | BS EN 50290-2-29 - COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
| 04/30123559 DC : DRAFT OCT 2004 | EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS |
| I.S. EN 14035-19:2003 | FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
| PREN 14782 : DRAFT 2015 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| 12/30265301 DC : 0 | BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY |
| I.S. EN 16523-2:2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| 14/30301841 DC : 0 | BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| PREN 14187-5 : DRAFT 2016 | COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
| DIN EN 16261-3:2013-03 | Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
| PREN 13832-2 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS |
| 11/30246171 DC : 0 | BS EN 71-4 - SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
| 04/30122632 DC : DRAFT SEP 2004 | CEN/BT/TF 158 N13 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 10: CONNECTORS FOR TAPPING UNITS OF BEVERAGE DISPENSING SYSTEMS, MATING DIMENSIONS |
| BS EN 15649-1 : 2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| 03/319400 DC : DRAFT NOV 2003 | BS EN 14035-21 - FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| 05/30133728 DC : DRAFT MAY 2005 | EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| BS EN 13832-3:2006 | Footwear protecting against chemicals Requirements for footwear highly resistant to chemicals under laboratory conditions |
| PD CEN/TR 15990:2010 | Data sheets. Footwear tests materials and test adhesives |
| 13/30279826 DC : 0 | BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS EN 50290-2-37:2016 | Communication cables Common design rules and construction. Polyethylene insulation for coaxial cables |
| EN 115-1:2017 | Safety of escalators and moving walks - Part 1: Construction and installation |
| BS EN 50290-2-25:2013 | Communication cables Common design rules and construction. Polypropylene insulation compounds |
| BS EN 16264:2014 | Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools |
| BS EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria |
| 14/30293503 DC : 0 | BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| UNI CEN/TS 16354 : 2014 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| PREN 13832-1 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| 08/30180838 DC : DRAFT JUNE 2008 | BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| PD EN 14035-17:2004 | Fireworks Ground spinners. Specification and test methods |
| BS EN 16028:2012 | Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications |
| 13/30293736 DC : 0 | BS EN 50290-2-33 - COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION |
| UNE-EN 15649-1:2010 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| PREN 71-1 : DRAFT 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| HD 631.1 : 200S2 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| I.S. EN 16264:2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| CEN/TR 15990:2010/AC:2010 | DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES |
| I.S. EN 60544-2:2012 | ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV)) |
| PD EN 14035-4:2003 | Fireworks Bangers and banger batteries. Specification and test methods |
| BS EN 13832-2:2006 | Footwear protecting against chemicals Requirements for footwear resistant to chemicals under laboratory conditions |
| UNI EN 71-1 : 2015 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| I.S. EN 50290-2-38:2016 | COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES |
| PREN 50290-2-38 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| I.S. EN 14035-21:2005 | FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| DIN EN 15947-4:2016-02 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
| I.S. EN 50368:2003 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| I.S. EN 15651-1:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| UNE-EN 50290-2-38:2016 | Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables |
| PREN 295-4 : DRAFT 2010 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| I.S. EN 14035-33:2005 | FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
| UNE-EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| EN 16523-1:2015 | Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact |
| BS EN 60684-3-247 : 2011 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011) |
| PREN 16759 : DRAFT 2014 | STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS) |
| DIN EN 71-1:2015-02 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| ONORM EN 13832-2 : 2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| DIN EN 12790:2009-07 | Child use and care articles - Reclined cradles |
| DIN EN 14879-2 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| DIN EN 14879-3 E : 2007 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS |
| DIN EN 15062 E : 2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| DIN EN 295-4:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| DIN EN 14782 E : 2006 | SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
| DIN EN 15346:2015-01 | PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| BS EN 14035-25:2005 | Fireworks Party poppers. Specification and test methods |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| BS EN 13121-1:2003 | GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions |
| BS EN 10329 : 2005 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| BS EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings |
| BS EN 14035-22:2004 | Fireworks Mines. Specification and test methods |
| BS EN 14035-7:2004 | Fireworks Bengal matches. Specification and test methods |
| BS EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete |
| BS EN 10310:2003 | Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings |
| EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| DIN EN 1504-2:2005-01 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004 |
| DIN EN 1504-7:2006-11 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN 14354:2017 | Wood-based panels - Wood veneer floor coverings |
| EN 14035-21 : 2005 | FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| EN 14035-20 : 2005 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
| UNI EN 16028 : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| UNI EN 15434 : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNI EN 1504-7 : 2007 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
| UNI EN 15189 : 2007 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| UNI EN 295-3 : 2012 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS |
| UNI EN 14865-2 : 2011 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 10245-2 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| UNI EN 295-4 : 2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| EN 50290-2-33:2016 | Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable) |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| UNI EN 12790 : 2009 | CHILD USE AND CARE ARTICLES - RECLINED CRADLES |
| UNI EN 14294 : 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
| CEI EN 60684-3-214 : 2015 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
| DIN EN 16028 E : 2012 | RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS |
| 02/123856 DC : DRAFT OCT 2002 | BS EN 14035-16 - FIREWORKS - PART 16: FRICTION-IGNITED FLASH BANGERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| 12/30254141 DC : 0 | BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| 16/30337049 DC : 0 | BS EN 50290-2-34 - COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES |
| BS EN 61215-2:2017 | Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test procedures |
| 03/319402 DC : DRAFT NOV 2003 | BS EN 14035-26 - FIREWORKS - PART 26: PERCUSSION CAPS - SPECIFICATION AND TEST METHODS |
| PREN 50290-2-33 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION |
| 03/319401 DC : DRAFT NOV 2003 | BS EN 14035-25 - FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| BS EN 12488:2016 | Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing |
| DIN EN 15651-2:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| BS EN IEC 62677-3-101:2018 | Heat-shrinkable low and medium voltage moulded shapes Specification for individual materials. Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications |
| DIN EN 15551 E : 2011 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| 10/30195690 DC : 0 | BS EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| DIN EN 16523-1 E : 2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| 12/30254135 DC : 0 | BS EN 15651-2 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| UNI EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| CEI EN 50290-2-23 : 2014 | COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
| BS EN 14187-5:2003 | Cold applied joint sealants Test method for the determination of the resistance to hydrolysis |
| PREN 15651-4 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| BS EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Definitions, classification, general principles of design, performance requirements and test methods |
| UNE-EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| 13/30281710 DC : 0 | BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| 13/30293741 DC : 0 | BS EN 50290-2-37 - COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
| UNE-EN 10310:2011 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| UNE-EN 15947-4:2016 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
| UNE-EN 16265:2016 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
| PD EN 14035-10:2004 | Fireworks Double bangers. Specification and test methods |
| BS EN 50368:2003 | Cable cleats for electrical installations |
| PREN 13832-3 : DRAFT 2017 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS |
| UNI EN 13696 : 2009 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| DIN EN 15649-1:2014-06 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| PD EN 14035-31:2005 | Fireworks Shell-in-mortars. Specification and test methods |
| DIN EN 14035-13:2004-11 | FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
| PD EN 14035-9:2004 | Fireworks Crackling granules. Specification and test methods |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 14035-38:2006 | FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS |
| 03/319404 DC : DRAFT NOV 2003 | BS EN 14035-33 - FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
| UNE-EN 15651-3:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
| PD CEN/TS 16354:2013 | Laminate floor coverings. Underlays. Specification, requirements and test methods |
| 12/30254132 DC : 0 | BS EN 15651-1 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| 02/123861 DC : DRAFT OCT 2002 | BS EN 14035-35 - FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
| BS 7933-2:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications |
| 02/123853 DC : DRAFT OCT 2002 | BS EN 14035-10 - FIREWORKS - PART 10: DOUBLE BANGER - SPECIFICATION AND TEST METHODS |
| 16/30336750 DC : 0 | BS EN 50290-2-35 - COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
| BS EN 60684-3-214:2014 | Flexible insulating sleeving Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall |
| PD EN 14035-12:2003 | Fireworks Flash bangers and flash banger batteries. Specification and test methods |
| DIN EN 16523-1:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| BS EN 16523-2:2015 | Determination of material resistance to permeation by chemicals Permeation by gaseous chemical under conditions of continuous contact |
| PREN 15651-2 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| DIN EN 124-1:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN 16742:2013-10 | PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| UNI EN 71-13 : 2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
| UNI EN 15649-1 : 2014 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 16256-5:2012 | PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS |
| I.S. EN 14035-9:2004 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
| I.S. EN 62217:2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV)) |
| I.S. EN 50617-1:2015 | RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS |
| I.S. EN 13832-3:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| I.S. EN 60684-3-247:2011 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL |
| I.S. EN 14035-12:2003 | FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| PREN 15307 : DRAFT 2014 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| I.S. EN 13696:2009 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| PREN 50290-2-37 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
| I.S. EN 71-13:2014 | SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES |
| 14/30311496 DC : 0 | BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
| 17/30359551 DC : 0 | BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| 15/30316975 DC : 0 | BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE |
| PD EN 14035-18:2004 | Fireworks Hand-held fountains. Specification and test methods |
| I.S. EN 15947-4:2015 | PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS |
| UNE-EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 14187-5:2003 | COLD APPLIED JOINT SEALANTS - PART 5: TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO HYDROLYSIS |
| DIN EN 295-3:2012-03 | Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
| I.S. EN 14035-17:2004 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 50290-2-25:2013 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
| I.S. EN 14035-10:2004 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 71-1:2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| S.R. CEN TR 15990:2010 | DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES |
| EN 15468:2016 | Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
| DIN EN 14865-2:2011-01 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010) |
| DIN EN 14510 E : 2005 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - DETERMINATION OF SOLE POSITIONING TACK (SPOTTING TACK) |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| BS EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection |
| BS EN 14354:2017 | Wood-based panels. Wood veneer floor coverings |
| ISO 9054:1990 | Cellular plastics, rigid — Test methods for self-skinned, high-density materials |
| UNE-EN 16028:2013 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| DIN EN 15189 E : 2007 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 1504-2:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| DIN EN 15307:2015-04 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| BS EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings |
| UNE-EN 14294:2010 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| 15/30324856 DC : 0 | BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION |
| BS EN 13529:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| BS EN 14035-38:2006 | Fireworks Shot tubes. Specification and test methods |
| BS EN 15434 : 2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| UNE-EN 15307:2015 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| BS EN 14035-34:2003 | Fireworks Table bombs. Specification and test methods |
| BS EN 14035-19:2003 | Fireworks Hand-held sparklers. Specification and test methods |
| UNE-EN 10245-2:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| BS EN ISO 2039-2:2000 | Determination of Rockwell hardness. Rockwell hardness Rockwell hardness |
| DIN EN 15434:2010-07 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
| BS EN 15468:2016 | Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods |
| BS EN 14035-24:2004 | Fireworks Novelty matches. Specification and test methods |
| BS EN 14035-23:2003 | Fireworks Non-hand-held sparklers. Specification and test methods |
| BS EN 15189:2006 | Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| UNE-EN 71-4:2013 | Safety of toys - Part 4: Experimental sets for chemistry and related activities |
| BS EN 14510:2005 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack) |
| UNE-EN 14354:2017 | Wood-based panels - Wood veneer floor coverings |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| BS EN 14035-15:2003 | Fireworks Fountains. Specification and test methods |
| BS EN 14035-5:2006 | Fireworks Batteries and combinations. Specification and test methods |
| DIN EN 15468:2016-08 | Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
| DIN EN 15307 E : 2015 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| DIN EN 13893:2003-02 | RESILIENT, LAMINATE AND TEXTILE FLOOR COVERINGS - MEASUREMENT OF DYNAMIC COEFFICIENT OF FRICTION ON DRY FLOOR SURFACES |
| EN 14035-3 : 2004 | FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS |
| EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
| EN 295-3:2012 | Vitrified clay pipe systems for drains and sewers - Part 3: Test methods |
| EN 16261-3:2012 | Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 14035-7 : 2004 | FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS |
| EN 14035-27:2003/AC:2005 | FIREWORKS - PART 27: ROCKETS - SPECIFICATION AND TEST METHODS |
| EN 14879-5:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| EN 14510:2005 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| EN 15189:2006 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| EN 14035-25 : 2005 | FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS |
| EN 14035-34:2003/AC:2005 | FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS |
| EN 13696:2008 | Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance |
| EN 14035-35 : 2004 | FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS |
| EN 14294:2010 | Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes |
| EN ISO 2039-2 : 1999 | PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS |
| EN 14035-22 : 2004 | FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 14035-24 : 2004 | FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS |
| EN 16028:2012 | Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN ISO 9054 : 1999 | CELLULAR PLASTICS, RIGID - TEST METHODS FOR SELF-SKINNED, HIGH-DENSITY MATERIALS |
| EN 14035-4:2003/AC:2005 | FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| EN 15947-4:2015 | Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods |
| EN 14035-15:2003/AC:2005 | FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS |
| EN 14035-8 : 2004 | FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
| EN 14035-19:2003/AC:2006 | FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
| EN 15649-1:2009+A2:2013 | Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods |
| EN 14035-17 : 2004 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| EN 15651-3:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints |
| EN 14035-33 : 2005 | FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN 14035-10 : 2004 | FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS |
| EN 14035-23:2003/AC:2005 | FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS |
| EN 14035-13 : 2004 | FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS |
| EN 14035-12:2003/AC:2005 | FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| EN 1504-7:2006 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection |
| EN 16265:2015 | Pyrotechnic articles - Other pyrotechnic articles - Ignition devices |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| EN 14035-18 : 2004 | FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
| EN 14035-6 : 2004 | FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
| EN 16256-5:2012 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
| EN 16263-4:2015 | Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods |
| EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN 14865-2:2006+A2:2010 | Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| EN 14035-31 : 2005 | FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS |
| EN 14035-28 : 2004 COR 2006 | FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS |
| EN 15307:2014 | Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements |
| EN 14035-9 : 2004 | FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS |
| EN 13893:2002 | Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN 15346:2014 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| EN 15651-1:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements |
| EN 14035-38:2006 | Fireworks - Part 38: Shot tubes - Specification and test methods |
| EN 14035-5 : 2006 | FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS |
| 14/30303444 DC : 0 | BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS |
| EN 71-13:2014 | Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games |
| PD EN 14035-20:2005 | Fireworks Jumping crackers. Specification and test methods |
| PD EN 14035-33:2006 | Fireworks Spinners. Specification and test methods |
| UNI EN 16264 : 2014 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS |
| PREN 71-4 : DRAFT 2011 | SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES |
| PREN 15651-1 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS |
| UNE-EN 16256-5:2013 | Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods |
| 02/123858 DC : DRAFT OCT 2002 | BS EN 14035-18 - FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
| I.S. EN 14035-6:2004 | FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| UNE-EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| BS EN 50290-2-29:2016 | Communication cables Common design rules and construction. Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables |
| PREN 50290-2-29 : DRAFT 2016 | COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES |
| 13/30276234 DC : 0 | BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| PREN 50290-2-35 : DRAFT 2016 | COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND |
| UNE-EN 15346:2015 | Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
| DIN EN 14035-33:2006-01 | FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS |
| I.S. EN 13832-2:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS |
| I.S. EN 16265:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES |
| 05/30136487 DC : DRAFT JUL 2005 | EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS |
| 13/30281393 DC : 0 | BS EN 50290-2-23 - COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION |
| BS EN 16261-3:2012 | Pyrotechnic articles. Fireworks, Category 4 Test methods |
| BS EN 71-13:2014 | Safety of toys Olfactory board games, cosmetic kits and gustative games |
| DIN EN 14035-21:2006-01 | FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| DIN EN 14035-20:2005-06 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
| XP P05 010 : 2004 XP | FLOOR COVERINGS - DETERMINATION OF SLIP RESISTANCE USING THE RAMP TEST |
| 12/30254138 DC : 0 | BS EN 15651-3 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| UNE-EN 71-1:2015 | Safety of toys - Part 1: Mechanical and physical properties |
| BS EN 13696:2008 | Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance |
| CEI 20-79 : 2009 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| 14/30301109 DC : 0 | BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS |
| EN IEC 62677-3-101:2018 | Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications |
| 13/30293745 DC : 0 | BS EN 50290-2-38 - COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES |
| 07/30164611 DC : 0 | BS EN 15651-2 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 2: SEALANTS FOR GLAZING |
| PREN 50290-2-23 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION |
| PREN 15346 : DRAFT 2013 | PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES |
| DIN EN 14035-17:2004-11 | FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS |
| PREN 1504-7 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
| BS EN 16523-1 : 2015 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| UNE-EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
| BS EN 71-1 : 2014 | SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES |
| 07/30163692 DC : 0 | BS EN 15651-3 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 3: SEALANTS FOR SANITARY JOINTS |
| EN 13832-3:2006 | Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions |
| UNE-EN 16263-4:2016 | Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods |
| UNE-EN 50290-2-35:2016 | Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound |
| I.S. EN 14035-18:2005 | FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS |
| BS EN 15651-1:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements |
| I.S. EN 16263-4:2015 | PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS |
| I.S. EN IEC 62677-3-101:2018 | HEAT-SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS |
| I.S. EN 13832-1:2006 | FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS |
| I.S. EN 14035-8:2004 | FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| UNE-EN 50290-2-37:2016 | Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables |
| UNE-EN 50548:2012 | Junction boxes for photovoltaic modules |
| I.S. EN 14035-20:2005 | FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS |
| S.R. CEN/TS 16354:2013 | LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 60455-3-8:2013 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV)) |
| PREN 50290-2-25 : DRAFT 2013 | COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS |
| BS EN 115-1:2017 | Safety of escalators and moving walks Construction and installation |
| I.S. EN 15649-1:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS |
| EN 71-1:2014 | Safety of toys - Part 1: Mechanical and physical properties |
| I.S. EN 15651-3:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| 14/30300917 DC : 0 | BS EN 16759 - STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS) |
| 15/30327125 DC : 0 | BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION |
| NF EN 50548 : 2011 AMD 2 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| PREN 15651-3 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| PREN 50548 : DRAFT 2009 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| PREN 50290-2-34 : DRAFT 2016 | COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES |
| BS EN 13832-1:2006 | Footwear protecting against chemicals Terminology and test methods |
| EN 15651-4:2017/AC:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| I.S. EN 14035-4:2003 | FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS |
| EN 60684-3-247:2011/A1:2017 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011/A1:2016) |
| DIN EN 1504-7:2015-09 (Draft) | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION |
| DIN EN 14294 E : 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES |
| DIN EN 14354 E : 2017 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| DIN EN 13529:2003-12 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - RESISTANCE TO SEVERE CHEMICAL ATTACK |
| UNE-EN 15468:2016 | Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods |
| BS EN 14294:2004 | Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes |
| BS EN 14035-28:2004 | Fireworks Roman candles. Specification and test methods |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| BS EN 14865-2 : 2006 | RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H |
| UNE-EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| BS EN 15346:2014 | Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates |
| BS EN 14035-27:2003 | Fireworks Rockets. Specification and test methods |
| EN 50548 : 2011 AMD 2 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| DIN EN 15651-3:2017-07 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS |
| DIN EN 10310:2004-07 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| EN 13529:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
| EN 60684-3-214:2014 | Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| EN 124-1:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods |
| DIN EN 16523-2:2015-04 | DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT |
| DIN EN 14510:2005-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack) |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 62631-3-1:2016 | Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method |
| DIN EN 10245-2:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
| EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| EN 10329:2006 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| DIN EN 10290:2004-08 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| EN 60544-2:2012 | Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test |
| EN 50290-2-23:2013 | COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES |
| DIN EN 14879-5:2007-10 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components |
| DIN EN 10289:2004-08 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| DIN EN 10329:2006-04 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| EN 50290-2-38 : 2016 | Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables |
| DIN EN 14354:2017-11 | WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| EN 50290-2-35 : 2016 | Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound |
| EN 50617-1:2015 | Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits |
| UNE-EN 15434:2007 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| BS 2782-3.365C(1992) : 1992 AMD 10694 | PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
| AS 1735.5.1:2019 | Lifts, escalators and moving walks Safety of escalators and moving walks - Construction and installation (EN 115-1:2017, MOD) |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.