EN ISO 9163:2005
Current
The latest, up-to-date edition.
04-01-2005
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Sampling and conditioning
6 Production of test specimens - Reference method
7 Production of test specimens - Short method
8 Tensile testing
9 Expression of results
10 Test report
Annex A (informative) Precision statement
Bibliography
ISO 9163:2005 specifies two methods for the determination of the tensile stress at break of an impregnated roving:a reference method using test specimens produced with moulded epoxy tabs;a short method using test specimens with no tabs or simple cardboard or composite tabs.The methods are applicable to both assembled (multistrand) and direct (multifilament) rovings; nevertheless the reference method may be used for various linear densities, but the short method is described for 1200 tex rovings only, which is the linear density that allows the roving to spread out most easily to give a flat tape.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| ISO 9163:2005 | Identical |
| NBN EN ISO 9163 : 2005 | Identical |
| NEN EN ISO 9163 : 2005 | Identical |
| NS EN ISO 9163 : 2ED 2005 | Identical |
| I.S. EN ISO 9163:2005 | Identical |
| PN EN ISO 9163 : 2007 | Identical |
| SN EN ISO 9163 : 2005 | Identical |
| UNI EN ISO 9163 : 2005 | Identical |
| BS EN ISO 9163:2005 | Identical |
| UNE-EN ISO 9163:2006 | Identical |
| NF EN ISO 9163 : 2005 | Identical |
| DIN EN ISO 9163 E : 2005 | Identical |
| DIN EN ISO 9163:2005-07 | Identical |
| DIN EN 16245-3:2013-08 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS EN 16245-3:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre |
| UNI EN 16245-3 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS EN 14020-3:2002 | Reinforcements. Specification for textile glass rovings Specific requirements |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| UNE-EN 16245-3:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| DIN EN 124-6 E : 2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| EN 14020-3:2002 | Reinforcements - Specification for textile glass rovings - Part 3: Specific requirements |
| 11/30239980 DC : DRAFT MAR 2011 | BS EN 16245-3 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| I.S. EN 16245-3:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS EN 14020-2:2002 | Reinforcements. Specification for textile glass rovings Methods of test and general requirements |
| EN 16245-3:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| EN 14020-2:2002 | Reinforcements - Specification for textile glass rovings - Part 2: Methods of test and general requirements |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| ISO 1172:1996 | Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods |
| ISO 3341:2000 | Textile glass Yarns Determination of breaking force and breaking elongation |
| ISO 2078:1993 | Textile glass Yarns Designation |
| ISO 472:2013 | Plastics Vocabulary |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 1887:2014 | Textile glass Determination of combustible-matter content |
| ISO 7822:1990 | Textile glass reinforced plastics — Determination of void content — Loss on ignition, mechanical disintegration and statistical counting methods |
| ISO 1889:2009 | Reinforcement yarns Determination of linear density |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.