EN ISO 9445-1:2010
Current
The latest, up-to-date edition.
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009)
03-03-2010
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
5 Type of delivery and delivery conditions
6 Tolerances on thickness for cold-rolled narrow strip
and products obtained from cold-rolled narrow strip
7 Tolerances on width for cold-rolled narrow strip and
products obtained from cold-rolled narrow strip
8 Preferred coil inner diameters for cold-rolled narrow
strip
9 Tolerances on length for cut lengths obtained from
cold-rolled narrow strip
10 Tolerances on edge camber for cold-rolled narrow strip
and cut lengths obtained from cold-rolled narrow strip
11 Tolerances on squareness for cut lengths obtained from
cold-rolled narrow strip
12 Tolerances on flatness for cut lengths obtained from
cold-rolled narrow strip
13 Edge waviness tolerances for cold-rolled strip
14 Form of coils
15 Ordered format for cut lengths
16 Measurement of thickness for cold-rolled narrow strip
and cut lengths obtained from cold-rolled narrow strip
17 Measurement of width
18 Measurement of length
19 Measurement of edge camber
20 Measurement of squareness
21 Measurement of flatness and waviness
ISO 9445-1:2009 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip.Narrow strip and cut lengths with widths of less than 600 mm, which are manufactured from wide strip by longitudinal slitting, are covered in ISO 9445-2.
| Committee |
CEN/TC 459/SC 5
|
| DevelopmentNote |
Supersedes EN ISO 9445. (03/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 9445-1 : 2010 | Identical |
| I.S. EN ISO 9445-1:2010 | Identical |
| ISO 9445-1:2009 | Identical |
| UNI EN ISO 9445-1 : 2010 | Identical |
| UNE-EN ISO 9445-1:2011 | Identical |
| NBN EN ISO 9445-1 : 2010 | Identical |
| BS EN ISO 9445-1:2010 | Identical |
| DIN EN ISO 9445-1:2010-06 | Identical |
| NEN EN ISO 9445-1 : 2010 | Identical |
| NS EN ISO 9445-1 : 2010 | Identical |
| SN EN ISO 9445-1 : 2010 | Identical |
| PN EN ISO 9445-1 : DEC 2010 | Identical |
| I.S. EN 16397-2:2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 16397-2:2015 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| PD CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications Design method |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 62878-1-1:2015 | Device embedded substrate - Part 1-1: Generic specification - Test methods |
| EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| BS EN 16397-2:2014 | Flexible couplings Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings |
| DIN EN 10028-1:2017-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 295-4:2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| I.S. EN 10028-1:2017 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 62878-1-1:2015 | Device embedded substrate Generic specification. Test methods |
| UNI EN 16397-2 : 2014 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| EN 1090-2:2008+A1:2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| DIN EN 295-4:2013-05 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| UNI EN 295-4 : 2013 | VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 16397-2:2015-01 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| 12/30258206 DC : 0 | BS EN 16397-2 - FLEXIBLE COUPLINGS - PART 2: MATERIALS AND DIMENSIONS FOR METAL BANDED FLEXIBLE COUPLINGS |
| S.R. CEN/TR 14585-3:2017 | CORRUGATED METAL HOSE ASSEMBLIES FOR PRESSURE APPLICATIONS - PART 3: DESIGN METHOD |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 10028-1:2017 | Flat products made of steels for pressure purposes - Part 1: General requirements |
| EN 16397-2:2014 | Flexible couplings - Part 2: Characteristics and testing for metal banded flexible couplings, adaptors and bushes |
| EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| DIN EN 16397-2 E : 2015 | FLEXIBLE COUPLINGS - PART 2: CHARACTERISTICS AND TESTING FOR METAL BANDED FLEXIBLE COUPLINGS, ADAPTORS AND BUSHES |
| CEN/TR 14585-3:2017 | Corrugated metal hose assemblies for pressure applications - Part 3: Design method |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| UNE-EN 295-4:2013 | Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings |
| BS EN 10028-1:2017 | Flat products made of steels for pressure purposes General requirements |
| ISO 6929:2013 | Steel products — Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.