• There are no items in your cart

EN ISO 9934-1:2016

Current
Current

The latest, up-to-date edition.

Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016)
Published date

12-14-2016

European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Qualification and certification of personnel
5 Safety and environment
6 Testing procedure
7 Surface preparation
8 Magnetization
9 Detection media
10 Viewing conditions
11 Overall performance test
12 Interpretation and recording of indications
13 Demagnetization
14 Cleaning
15 Test report
Annex A (informative) - Example for determination of
        currents required to achieve specified
        tangential field strengths for various
        magnetization techniques
Bibliography

ISO 9934-1:2016 specifies general principles for the magnetic particle testing of ferromagnetic materials. Magnetic particle testing is primarily applicable to the detection of surface-breaking discontinuities, particularly cracks. It can also detect discontinuities just below the surface but its sensitivity diminishes rapidly with depth.ISO 9934-1:2016 specifies the surface preparation of the part to be tested, magnetization techniques, requirements and application of the detection media, and the recording and interpretation of results. Acceptance criteria are not defined. Additional requirements for the magnetic particle testing of particular items are defined in product standards (see the relevant International Standards or European standards).ISO 9934-1:2016 does not apply to the residual magnetization method.

Committee
CEN/TC 138
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

BS EN 15313:2016 Railway applications. In-service wheelset operation requirements. In-service and off-vehicle wheelset maintenance
DIN EN 16753:2016-09 GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES
11/30243072 DC : 0 BS EN 1369 - FOUNDING - MAGNETIC PARTICLE TESTING
08/30190326 DC : DRAFT DEC 2008 BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
PREN 10228-1 : DRAFT 2012 NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION
EN 10228-1:1999 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
I.S. EN 448:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
EN 1559-3:2011 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
UNE-EN 15313:2017 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
BS EN 1369:2012 Founding. Magnetic particle testing
DIN EN 1369:2013-01 Founding - Magnetic particle testing
DIN EN 10228-1:1999-07 NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION
EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
EN 12080:2017 Railway applications - Axleboxes - Rolling bearings
CEN/TR 16638:2014 Non-destructive testing - Penetrant and magnetic particle testing using blue light
DIN EN ISO 16330:2004-08 Reciprocating positive displacement pumps and pump units - Technical requirements (ISO 16330:2003)
DIN EN 15313:2016-09 RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE
PD CEN/TR 16638:2014 Non-destructive testing. Penetrant and magnetic particle testing using blue light
I.S. EN 10213:2007 STEEL CASTINGS FOR PRESSURE PURPOSES
07/19990771 DC : 0 BS EN 2857-001 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS FOR FERROMAGNETIC MATERIALS - NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE INSPECTION - PART 1: MAGNETIC PARTICLE TESTING - GENERAL REQUIREMENTS
15/30304304 DC : 0 BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
UNE-EN 16668:2016 Industrial valves - Requirements and testing for metallic valves as pressure accessories
I.S. EN 15313:2016 RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE
I.S. EN 16668:2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
PREN 448 : DRAFT 2018 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
PREN 12080 : DRAFT 2015 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
DIN EN 12080:2015-06 (Draft) RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
DIN EN 15049:2007-12 Railway applications - Suspension components - Torsion bar, steel
BS EN 12080:2017 Railway applications. Axleboxes. Rolling bearings
DIN EN 1559-2:2014-12 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
I.S. EN 12080:2017 RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS
I.S. EN 1369:2012 FOUNDING - MAGNETIC PARTICLE TESTING
DIN EN 1559-3:2012-01 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
I.S. EN 1559-2:2014 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2 - ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
I.S. EN 1559-3:2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS
DIN EN 12080:2017-11 Railway applications - Axleboxes - Rolling bearings
I.S. EN 10228-1:2016 NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION
KTA 3407 : 2014 PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
VDI 3405 Blatt 2:2013-08 Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing
PD CEN ISO/TR 25107:2006 Non-destructive testing. Guidelines for NDT training syllabuses
DIN EN 15313 E : 2016 RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE
DIN EN 16753 E : 2016 GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES
13/30279798 DC : 0 BS EN 15313 - RAILWAY APPLICATIONS - IN-SERVICE WHEELSET OPERATION REQUIREMENTS - IN-SERVICE AND OFF-VEHICLE WHEELSET MAINTENANCE
13/30277463 DC : 0 BS EN 12927 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ROPES
16/30342040 DC : 0 BS EN 13941-2 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION
UNI EN 12516-1 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
I.S. EN 12516-1:2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
CEN ISO/TR 25107:2006 Non-destructive testing - Guidelines for NDT training syllabuses (ISO/TR 25107:2006)
BS EN 16668 : 2016 INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
PREN 1369 : DRAFT 2011 FOUNDING - MAGNETIC PARTICLE TESTING
ISO/TR 25107:2006 Non-destructive testing Guidelines for NDT training syllabuses
PREN 1559-2 : DRAFT 2012 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
I.S. EN 10225:2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
UNE-EN 10228-1:2016 Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection
DIN EN 10228-1:2016-10 NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION
DIN EN 448:2016-02 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
UNE-EN 1369:2013 Founding - Magnetic particle testing
EEMUA 158 : 2014 CONSTRUCTION SPECIFICATION FOR FIXED OFFSHORE STRUCTURES
UNE-EN 10225:2010 Weldable structural steels for fixed offshore structures - Technical delivery conditions
UNI EN 10225 : 2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
EN 1559-2:2014 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
UNI EN 1559-2 : 2014 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
UNI EN 1559-3 : 2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 3: ADDITIONAL REQUIREMENTS FOR IRON CASTINGS
14/30294476 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
13/30287824 DC : 0 BS EN 16668 - INDUSTRIAL VALVES - REQUIREMENTS AND TESTING FOR METALLIC VALVES AS PRESSURE ACCESSORIES
12/30270653 DC : 0 BS EN 10228-1 - NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION
12/30266615 DC : 0 BS EN 1559-2 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 2: ADDITIONAL REQUIREMENTS FOR STEEL CASTINGS
UNE-EN 16753:2016 Gas cylinders - Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases
BS EN 16753:2016 Gas cylinders. Periodic inspection and testing, in situ (without dismantling) of refillable seamless steel tubes of water capacity between 150 l and 3 000 l, used for compressed gases
UNE-EN 10213:2009 Steel castings for pressure purposes
UNI CEN ISO/TR 25107 : 2012 NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES
BS EN 12516-1 : 2014 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
EN 12516-1:2014 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
I.S. CEN ISO TR 25107:2006 NON-DESTRUCTIVE TESTING - GUIDELINES FOR NDT TRAINING SYLLABUSES
NF EN 10225 : 2009 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10263-1:2017 STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
DIN EN 15049 E : 2007 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - TORSION BAR, STEEL
DIN EN 10225:2009-10 WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS
BS EN 1559-2:2014 Founding. Technical conditions of delivery Additional requirements for steel castings
UNE-EN 1559-3:2012 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
BS EN ISO 16330:2003 Reciprocating positive displacement pumps and pump units. Technical requirements
BS EN 15049:2007 Railway applications. Suspension components. Torsion bar, steel
ISO 16330:2003 Reciprocating positive displacement pumps and pump units Technical requirements
UNE-EN 448:2017 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 10225:2009 Weldable structural steels for fixed offshore structures - Technical delivery conditions
EN 16668:2016+A1:2018 Industrial valves - Requirements and testing for metallic valves as pressure accessories
EN 15049:2007 Railway applications - Suspension components - Torsion bar, steel
EN ISO 16330 : 2003 RECIPROCATING POSITIVE DISPLACEMENT PUMPS AND PUMP UNITS - TECHNICAL REQUIREMENTS
EN 1369:2012 Founding - Magnetic particle testing
EN 15313:2016 Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance
EN 16753 : 2016 GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES
EN 448:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
DIN EN ISO 17638:2015-05 (Draft) NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING (ISO 17638:2016)
14/30288835 DC : 0 BS EN 16753 - GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES
17/30346741 DC : 0 BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES
S.R. CEN/TR 16638:2014 NON-DESTRUCTIVE TESTING - PENETRANT AND MAGNETIC PARTICLE TESTING USING BLUE LIGHT
18/30368651 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE
I.S. EN 16753:2016 GAS CYLINDERS - PERIODIC INSPECTION AND TESTING, IN SITU (WITHOUT DISMANTLING) OF REFILLABLE SEAMLESS STEEL TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L, USED FOR COMPRESSED GASES
BS EN 10263-1:2017 Steel rod, bars and wire for cold heading and cold extrusion General technical delivery conditions
KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
DIN EN 12516-1:2015-01 INDUSTRIAL VALVES - SHELL DESIGN STRENGTH - PART 1: TABULATION METHOD FOR STEEL VALVE SHELLS
UNE-EN 12516-1:2016 Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells
KTA 3201.3 : 2007(R2012) COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE
BS EN 448:2015 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
DIN EN 10213:2016-10 STEEL CASTINGS FOR PRESSURE PURPOSES
BS EN 10228-1:1999 Non-destructive testing of steel forgings Magnetic particle inspection
BS EN 10225:2009 Weldable structural steels for fixed offshore structures. Technical delivery conditions
BS EN 10213 : 2007 STEEL CASTINGS FOR PRESSURE PURPOSES
BS EN 1559-3:2011 Founding. Technical conditions of delivery Additional requirements for iron castings
EN 10213:2007+A1:2016 Steel castings for pressure purposes

EN 1330-2:1998 Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods
ISO 9712:2012 Non-destructive testing Qualification and certification of NDT personnel
ISO 3059:2012 Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
ISO 12707:2016 Non-destructive testing Magnetic particle testing Vocabulary
EN 1330-1:2014 NON DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
ISO 9934-2:2015 Non-destructive testing Magnetic particle testing Part 2: Detection media
ISO 9934-3:2015 Non-destructive testing Magnetic particle testing Part 3: Equipment

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.