EN ISO/IEC 17043:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010)
Withdrawn date
08-31-2010
Published date
02-01-2010
Publisher
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Technical Requirements
5 Management requirements
Annex A (informative) - Types of proficiency testing schemes
Annex B (informative) - Statistical methods for proficiency
testing
Annex C (informative) - Selection and use of proficiency
testing
Bibliography
ISO/IEC 17043:2010 specifies general requirements for the competence of providers of proficiency testing schemes and for the development and operation of proficiency testing schemes. These requirements are intended to be general for all types of proficiency testing schemes, and they can be used as a basis for specific technical requirements for particular fields of application.
| Committee |
CEN/CLC/JTC 1
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DIN EN ISO/IEC 17043:2010-05 | Identical |
| OVE/ONORM EN ISO/IEC 17043 : 2010 | Identical |
| DS EN ISO/IEC 17043 : 2010 | Identical |
| NEN EN ISO/IEC 17043 : 2010 | Identical |
| ISO/IEC 17043:2010 | Identical |
| NS EN ISO/IEC 17043 : 2010 | Identical |
| UNE-EN ISO/IEC 17043:2010 | Identical |
| NBN EN ISO/IEC 17043 : 2010 | Identical |
| I.S. EN ISO/IEC 17043:2010 | Identical |
| DIN EN ISO/IEC 17043 E : 2010 | Identical |
| PN EN ISO/IEC 17043 : 2011 | Identical |
| NF EN ISO/IEC 17043 : 2010 | Identical |
| BS EN ISO/IEC 17043:2010 | Identical |
| CEI UNI EN ISO/IEC 17043 : 2011 | Identical |
| SN EN ISO/IEC 17043:2010 | Identical |
| UNI CEI EN ISO/IEC 17043 : 2010 | Identical |
| SS-EN ISO/IEC 17043:2010 | Identical |
| DIN EN 13282-3:2015-06 | HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| BS EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| DIN EN 14793 E : 2017 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| PD CEN/TS 16980-1:2016 | Photocatalysis. Continuous flow test methods Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials |
| EN 61400-12-1:2017 | Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines |
| I.S. EN 13282-3:2015 | HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| I.S. EN 62209-1:2016 | MEASUREMENT PROCEDURE FOR THE ASSESSMENT OF SPECIFIC ABSORPTION RATE OF HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - PART 1: DEVICE USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
| CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| I.S. EN 16101:2012 | WATER QUALITY - GUIDANCE STANDARD ON INTERLABORATORY COMPARISON STUDIES FOR ECOLOGICAL ASSESSMENT |
| 14/30293538 DC : 0 | BS EN 14793 - STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH THE REFERENCE METHOD |
| I.S. EN 15267-4:2017 | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| DIN EN 15267-4:2015-08 (Draft) | AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCES |
| DIN EN 14793:2017-05 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| UNE-EN 15267-4:2018 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| S.R. CEN/TS 16980-1:2016 | PHOTOCATALYSIS - CONTINUOUS FLOW TEST METHODS - PART 1: DETERMINATION OF THE DEGRADATION OF NITRIC OXIDE (NO) IN THE AIR BY PHOTOCATALYTIC MATERIALS |
| 17/30337117 DC : 0 | BS EN 17212 - ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALYSIS - DETERMINATION OF MELAMINE AND CYANURIC ACID CONTENT BY LIQUID CHROMATOGRAPHIC METHOD WITH MASS SPECTROMETRIC DETECTION (LC-MS/MS) |
| CEN/TS 16980-1:2016 | Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials |
| VDI 3884 Blatt 1:2015-02 | Olfactometry - Determination of odour concentration by dynamic olfactometry - Supplementary instructions for application of DIN EN 13725 |
| VDI 4221 Blatt 2:2017-03 | Quality assurance - Requirements on interlaboratory tests in immission control - Design, performance and evaluation of interlaboratory tests for emission measurement methods under laboratory conditions |
| BS EN 15267-4:2017 | Air quality. Certification of automated measuring systems Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| PD CLC/TR 50619:2014 | Guidance on how to conduct Round Robin Tests |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| PREN 17212 : DRAFT 2017 | ANIMAL FEEDING STUFFS: METHODS OF SAMPLING AND ANALSYSIS - DETERMINATION OF MELAMINE AND CYANURIC ACID CONTENT BYLIQUID CHROMATOGRAPHIC METHOD WITH MASS SPECTROMETRIC DETECTION (LC-MS/MS) |
| EN 62209-1:2016 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1: Devices used next to the ear (Frequency range of 300 MHz to 6 GHz) |
| UNI EN 16101 : 2013 | WATER QUALITY - GUIDANCE STANDARD ON INTERLABORATORY COMPARISON STUDIES FOR ECOLOGICAL ASSESSMENT |
| UNE-EN 16101:2013 | Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment |
| I.S. EN 61400-12-1:2017 | WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
| UNE-EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| 15/30318313 DC : 0 | BS EN 15267-4 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 4: PERFORMANCE CRITERIA AND TEST PROCEDURES FOR AUTOMATED MEASURING SYSTEMS FOR PERIODIC MEASUREMENTS OF EMISSIONS FROM STATIONARY SOURCE |
| CEI EN 61400-12-1 : 2007 | WIND POWER GENERATION SYSTEMS - PART 12-1: POWER PERFORMANCE MEASUREMENT OF ELECTRICITY PRODUCING WIND TURBINES |
| BS EN 14793:2017 | Stationary source emissions. Demonstration of equivalence of an alternative method with a reference method |
| EN 15267-4:2017 | Air quality - Certification of automated measuring systems - Part 4: Performance criteria and test procedures for automated measuring systems for periodic measurements of emissions from stationary sources |
| EN 16101:2012 | Water quality - Guidance standard on interlaboratory comparison studies for ecological assessment |
| BS EN 13282-3:2013 | Hydraulic road binders Conformity evaluation |
| DIN EN 16101:2012-12 | WATER QUALITY - GUIDANCE STANDARD ON INTERLABORATORY COMPARISON STUDIES FOR ECOLOGICAL ASSESSMENT |
| CEI EN 62209-1 : 2007 | MEASUREMENT PROCEDURE FOR THE ASSESSMENT OF SPECIFIC ABSORPTION RATE OF HUMAN EXPOSURE TO RADIO FREQUENCY FIELDS FROM HAND-HELD AND BODY-MOUNTED WIRELESS COMMUNICATION DEVICES - PART 1: DEVICES USED NEXT TO THE EAR (FREQUENCY RANGE OF 300 MHZ TO 6 GHZ) |
| S.R. CLC/TR 50619:2014 | GUIDANCE ON HOW TO CONDUCT ROUND ROBIN TESTS |
| UNE-EN 14793:2017 | Stationary source emissions - Demonstration of equivalence of an alternative method with a reference method |
| BS EN 16101:2012 | Water quality. Guidance standard on interlaboratory comparison studies for ecological assessment |
| I.S. EN 14793:2017 | STATIONARY SOURCE EMISSIONS - DEMONSTRATION OF EQUIVALENCE OF AN ALTERNATIVE METHOD WITH A REFERENCE METHOD |
| CLC/TR 50619:2014 | Guidance on how to conduct Round Robin Tests |
| EN 13282-3:2015 | Hydraulic road binders - Part 3: Conformity evaluation |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ECA ILAC P9 : 2014 | ILAC POLICY FOR PARTICIPATION IN PROFICIENCY TESTING ACTIVITIES |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| EN 14136:2004 | Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures |
| ISO Guide 35:2017 | Reference materials Guidance for characterization and assessment of homogeneity and stability |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO/IEC 17011:2004 | Conformity assessment General requirements for accreditation bodies accrediting conformity assessment bodies |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ECA ILAC P10 : 2013 | ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.