• There are no items in your cart

ENV 10169-2 : 1999

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS
Superseded date

04-01-2006

Published date

01-12-2013

Foreword
1. Scope
2. Normative references
3. Definitions
    3.1 Building exterior applications
    3.2 Factory production control
    3.3 Initial type testing
    3.4 Performance test
    3.5 Corrosivity
    3.6 Corrosion stresses
    3.7 Corrosion system
    3.8 Climate
    3.9 Atmosphere
    3.10 Type of atmosphere
    3.11 Local environment
    3.12 Micro environment
    3.13 Corrosivity category
    3.14 Product flexibility category
    3.15 Corrosion protection category
    3.16 UV category
    3.17 UV resistance category
    3.18 Accessibility
    3.19 Period of protection
    3.20 Time of wetness
4. Designation
5. Substrates, organic coatings, manufacturing process
6. Requirements
    6.1 Properties which form part of factory production control
    6.2 Performance properties
    6.3 Freedom of defects
7. Testing
    7.1 General
    7.2 Test units
    7.3 Type and number of tests
    7.4 Sampling
    7.5 Retests
    7.6 Inspection documents
8. Marking
9. Packing and despatch
10. Storage
11. Disputes
12. Information to be supplied by the purchaser
Annex A (informative) Types of atmosphere
Annex B (informative) Relationship between corrosivity categories
and types of atmosphere. Examples of typical environments in a
temperate climate
Annex C (informative) Examples of exposures for the different UV
categories
Annex D (informative) ECCA outdoor exposure sites
Annex F (informative) Classification of coatings into corrosion
protection and UV resistance categories from outdoor exposure
test results

Gives specific requirements for continuously organic coated (coil coated) steel flat products that are used for building exterior applications. Specifies particularly, the performance different corrosion protection categories and different UV resistance categories. Covered in this standard are: wide strip, sheet cut from wide strip, slit side strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).

Committee
ECISS/TC 27
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Superseded
SupersededBy

03/309850 DC : DRAFT JUNE 2003 EN 13523-24 - COIL COATED METALS - TEST METHODS - PART 24: RESISTANCE TO BLOCKING AND PRESSURE MARKING
03/309845 DC : DRAFT JUNE 2003 EN 13523-12 - COIL COATED METALS - TEST METHODS - PART 12: RESISTANCE TO SCRATCHING
03/309846 DC : DRAFT JUNE 2003 EN 13523-16 - COIL COATED METALS - TEST METHODS - PART 16: RESISTANCE TO ABRASION
BS EN 13523-18:2002 Coil coated metals. Test methods Resistance to staining
BS EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products General information (definitions, materials, tolerances, test methods)
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming - Technical delivery conditions
EN 10271:1998 Electrolytically zinc-nickel (ZN) coated steel flat products - Technical delivery conditions
EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions
EN 10162:2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances
DIN 59231:2003-11 HOT-DIP METAL COATED CORRUGATED AND PROFILED STEEL SHEETS - DIMENSIONS, MASS AND STATIC PARAMETERS
03/309849 DC : DRAFT JUNE 2003 EN 13523-20 - COIL COATED METALS - TEST METHODS - PART 20: FOAM ADHESION
03/309848 DC : DRAFT JUNE 2003 EN 13523-19 - COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING
DIN EN 13523-16:2005-02 Coil coated metals - Test methods - Part 16: Resistance to abrasion
DIN EN 14782:2015-09 (Draft) SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
BS EN 10162:2003 Cold rolled steel sections. Technical delivery conditions. Dimensional and cross-sectional tolerances
BS EN 13523-16:2004 Coil coated metals. Test methods Resistance to abrasion
BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
I.S. EN 612:2005 EAVES GUTTERS WITH BEAD STIFFENED FRONTS AND RAINWATER PIPES WITH SEAMED JOINTS MADE OF METAL SHEET
DIN EN 10169-3:2003-09 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
DIN EN 10169-1:2004-04 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 10169-1:2004 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
I.S. EN 10326:2004 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 612:2005-04 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
DIN EN 14782 E : 2006 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
BS EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
BS EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products Products for building interior applications
I.S. EN 13523-6:2002 COIL COATED METALS - TEST METHODS - PART 6: ADHESION AFTER INDENTATION (CUPPING TEST)
I.S. EN 13523-18:2002 COIL COATED METALS - TEST METHODS - PART 18: RESISTANCE TO STAINING
EN 13523-6:2002 Coil coated metals - Test methods - Part 6: Adhesion after indentation (cupping test)
EN 13523-18:2002 Coil coated metals - Test methods - Part 18: Resistance to staining
03/309844 DC : DRAFT JUNE 2003 EN 13523-11 - COIL COATED METALS - TEST METHODS - PART 11: RESISTANCE TO SOLVENTS (RUBBING TEST)
02/713774 DC : DRAFT DEC 2002 EN 10336 - CONTINUOUSLY HOT-DIP COATED AND ELECTROLYTICALLY COATED STRIP AND SHEET OF MULTIPHASE STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
I.S. EN 10327:2004 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
02/704945 DC : DRAFT APR 2002 PREN 10326 - CONTINUOUSLY HOT-DIP COATED STRUCTURAL STEELS STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
XP P34 301 : 2002 XP STEEL SHEET AND STRIP EITHER COIL COATED OR ORGANIC FILM COUNTER GLUED OR COLAMINATED FOR BUILDING PURPOSES - TECHNICAL DELIVERY CONDITIONS
BS EN 13523-6:2002 Coil coated metals. Test methods Adhesion after indentation (cupping test)
BS EN 10327:2004 Continuously hot-dip coated strip and sheet of low carbon steels for cold forming. Technical delivery conditions
BS EN 10271:1999 Electrolytically zinc-nickel (ZN) coated steel flat products. Technical delivery conditions
BS EN 10326:2004 Continuously hot-dip coated strip and sheet of structural steels. Technical delivery conditions
EN 612:2005 Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
I.S. EN 10169-3:2003 CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 3: PRODUCTS FOR BUILDING INTERIOR APPLICATIONS
03/309847 DC : DRAFT JUNE 2003 EN 13523-17 - COIL COATED METALS - TEST METHODS - PART 17: ADHESION OF STRIPPABLE FILMS
02/704946 DC : DRAFT APR 2002 PREN 10327 - CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
02/713103 DC : DRAFT NOV 2002 PREN 10169-1 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 1: GENERAL INFORMATION (DEFINITIONS, MATERIALS, TOLERANCES, TEST METHODS)
EN 13523-16:2004 Coil coated metals - Test methods - Part 16: Resistance to abrasion
DIN EN 10326:2004-09 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF STRUCTURAL STEELS - TECHNICAL DELIVERY CONDITIONS
DIN EN 10327:2004-09 CONTINUOUSLY HOT-DIP COATED STRIP AND SHEET OF LOW CARBON STEELS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
DIN EN 10162:2003-12 Cold-rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances; German version EN 10162:2003

EN 10169-3:2003 Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications
EN 10147 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS
EN 10079:2007 Definition of steel products
EN 10169-1:2003 Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
EN 10142 : 2000 CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS
EN 10215 : 1995 CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN ISO 2409:2013 Paints and varnishes - Cross-cut test (ISO 2409:2013)
ISO 11507:2007 Paints and varnishes Exposure of coatings to artificial weathering Exposure to fluorescent UV lamps and water
EN 10154 : 2002 CONTINUOUSLY HOT-DIP ALUMINIUM-SILICON (AS) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
ENV 606 : DRAFT 1993 BAR CODED TRANSPORT AND HANDLING LABELS FOR STEEL PRODUCTS
ISO 2810:2004 Paints and varnishes Natural weathering of coatings Exposure and assessment
ISO 7253:1996 Paints and varnishes — Determination of resistance to neutral salt spray (fog)
EN 10143:2006 (edition 2) Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape
EN 10021:2006 General technical delivery conditions for steel products
ISO 4892-3:2016 Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps
ISO 11997-1:2017 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 1: Wet (salt fog)/dry/humid
ISO 8044:2015 Corrosion of metals and alloys Basic terms and definitions
EN 10204:2004 Metallic products - Types of inspection documents
EN 10214 : 1995 CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS
EN ISO 1520:2006 Paints and varnishes - Cupping test (ISO 1520:2006)
EN 10027-1:2016 Designation systems for steels - Part 1: Steel names
ISO 4628-6:2011 Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
EN 10020:2000 Definition and classification of grades of steel
ISO 4628-2:2016 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering
CR 10260 : 1998 DESIGNATION SYSTEMS FOR STEEL - ADDITIONAL SYMBOLS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.