GOST 849:2018
Current
Current
The latest, up-to-date edition.
Primary nickel. SpecificationsE
Available format(s)
Hardcopy
Language(s)
Russian
Published date
09-05-2018
Publisher
CONTAINED IN VOL. 15.06, 2017 Defines the determination of the relative peel resistance of adhesive bonds between one rigid adherend and one flexible adherend when tested under specified conditions of preparation and testing.
1.1 This specification covers polyolefin monofilament yarn materials, and test methods for standard polyolefin monofilaments. While designed primarily for testing standard polyolefin monofilaments, many of the procedures can be used, with little or no modification, for other polyolefin monofilaments. However, testing on non-standard polyolefin monofilaments should be conducted with caution. See 3.1 for a definition of standard polyolefin monofilament.
1.2 Only on condition that interlaboratory precision data are available for the specific procedure is any test method described, or referenced in this specification, recommended for acceptance testing of commercial shipments of polyolefin monofilaments.
| DevelopmentNote |
Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 15. (02/2002) Supersedes ASTM D 3195. (08/2010) Supersedes ASTM D 3195. (08/2010) Supersedes ASTM D 84. (02/2002) Supersedes ASTM D 84. (02/2002) Supersedes ASTM D 84. (02/2002) Supersedes ASTM D 84. (02/2002) Supersedes O A 51 (07/2004) Supersedes O A 51 (07/2004) Supersedes MIL P 22241 (07/2004) Supersedes MIL P 22241 (07/2004) Also numbered as AASHTO T 279. (05/2013) Also numbered as AASHTO T 279. (05/2013) Supersedes ASTM D 3330. (07/2010) Supersedes ASTM D 3330. (07/2010) Supersedes ASTM D 2088. (02/2002) Supersedes ASTM D 2088. (02/2002)
|
| DocumentType |
Standard
|
| Pages |
0
|
| ProductNote |
Reconfirmed EV A Reconfirmed 2017 Reconfirmed 2010 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed 2001 Reconfirmed 1995 Reconfirmed 2007 Reconfirmed 2003 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed 2001 Reconfirmed 1994 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2002 Reconfirmed 1997 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2007 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2017 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 1999 Reconfirmed EV (1999) Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2006 Reconfirmed 2014 Reconfirmed 2010 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2015 Reconfirmed 2009 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed 2000 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2015 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 1998 Reconfirmed 2016 Reconfirmed 2008 Reconfirmed 2002 Reconfirmed 1995 Reconfirmed 2003 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 1993 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed EN Reconfirmed 2016 Reconfirmed 2012 Reconfirmed EDT 1 Reconfirmed 2007 Reconfirmed EDT 1 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2010 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed EV A Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2014 Reconfirmed 2008 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2015 Reconfirmed 2010 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2001 Reconfirmed 1996 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2014 Reconfirmed EDT 1 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed 1995 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 1996 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2003 Reconfirmed 1998 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2017 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2008 Reconfirmed EDT 1 Reconfirmed 1995 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2014 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 1999 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2012 Reconfirmed 2004 Reconfirmed 1998 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2005 Reconfirmed 1999 Reconfirmed 2013 Reconfirmed EDT 1 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed EDT 1 Reconfirmed 2011 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2008 Reconfirmed 2003 Reconfirmed 2001 Reconfirmed 1997 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2005 Reconfirmed 2000 Reconfirmed 2005 Reconfirmed EDT 1 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2014 Reconfirmed 2006 Reconfirmed 2000 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2013 Reconfirmed 2009 Reconfirmed 2004 Reconfirmed 2017 Reconfirmed 2012 Reconfirmed 2006 Reconfirmed 2002 Reconfirmed 2016 Reconfirmed 2011 Reconfirmed 2006 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2015 Reconfirmed 2011 Reconfirmed 2004 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2000 Reconfirmed 2007 Reconfirmed 2002 Reconfirmed 1998 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2005 Reconfirmed 2001 Reconfirmed EDT 1 Reconfirmed 2013 Reconfirmed 2006 Reconfirmed EDT 1 Reconfirmed EDT 1 Reconfirmed 2002 Reconfirmed EDT 1 Reconfirmed 2017 Reconfirmed 2011 Reconfirmed 2007 Reconfirmed 2013 Reconfirmed 2006 Reconfirmed 2017 Reconfirmed 2009 Reconfirmed 2003 Reconfirmed 2013 Reconfirmed 2007 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 2016 Reconfirmed 2010 Reconfirmed 2004 Reconfirmed 1999 Reconfirmed 2012 Reconfirmed 2007 Reconfirmed 2014 Reconfirmed 2009
|
| PublisherName |
Interstandard (Russia)
|
| Status |
Current
|
| SupersededBy |
| ASTM D 1353 : 2013 : REDLINE | Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 1071 : 2017 | Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples |
| ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
| ASTM D 115 : 2017 : REDLINE | Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation |
| ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM D 3418 : 2015 : REDLINE | Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry |
| ASTM D 870 : 2015 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| TAPPI T 236 : 2013 | KAPPA NUMBER OF PULP |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| ASTM D 1129 : 2013 : REDLINE | Standard Terminology Relating to Water |
| ISO 12086-1:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ASTM D 3176 : 2015 : REDLINE | Standard Practice for Ultimate Analysis of Coal and Coke |
| ASTM D 618 : 2013 : REDLINE | Standard Practice for Conditioning Plastics for Testing |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 2258 : 1999 | Standard Practice for Sampling Yarn for Testing |
| ASTM D 646 : 2013 | Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) (Withdrawn 2022) |
| ASTM D 529 : 2004 | Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials (Withdrawn 2013) |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 484 : LATEST | SPECIFICATION FOR HYDROCARBON DRY CLEANING SOLVENTS |
| TAPPI T 411 : 2010 | THICKNESS (CALIPER) OF PAPER, PAPERBOARD, AND COMBINED BOARD |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| ASTM D 2463 : 2015 : REDLINE | Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
| ASTM D 1248 : 2016 : REDLINE | Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable |
| ASTM D 1613 : 2017 : REDLINE | Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products |
| ASTM D 3424 : 2011 : REDLINE | Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter |
| ASTM D 609 : 2017 : REDLINE | Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products |
| ASTM D 2029 : 1997 | Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point |
| ASTM D 3666 : 2016 : REDLINE | Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials |
| ASTM D 660 : 1993 | Standard Test Method for Evaluating Degree of Checking of Exterior Paints |
| ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
| ISO 9706:1994 | Information and documentation — Paper for documents — Requirements for permanence |
| ASTM D 585 : 1997 | Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product |
| ASTM D 1711 : 2015 : REDLINE | Standard Terminology Relating to Electrical Insulation |
| ASTM D 3699 : 2013-05 | SPECIFICATION FOR KEROSINE |
| ASTM D 1238 : 2013 : REDLINE | Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer |
| ASTM D 1455 : 2017 : REDLINE | Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish |
| ASTM D 2084 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING OSCILLATING DISK CURE METER |
| ASTM E 105 : 2016 : REDLINE | Standard Practice for Probability Sampling of Materials |
| ISO 12086-2:2006 | Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ASTM E 275 : 2008 | Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| NAPM IT9.16 : 1993 | IMAGING MEDIA - PHOTOGRAPHIC ACTIVITY TEST |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D 1959 : 1997 | Standard Test Method for Iodine Value of Drying Oils and Fatty Acids (Withdrawn 2006) |
| ASTM F 477 : 2014 : REDLINE | Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM E 260 : 1996 | Standard Practice for Packed Column Gas Chromatography |
| ASTM D 1076 : 2015 : REDLINE | Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex |
| TAPPI T 489 : 2013 | BENDING RESISTANCE (STIFFNESS) OF PAPER AND PAPERBOARD (TABER-TYPE TESTER IN BASIC CONFIGURATION) |
| ASTM D 16 : 2016 : REDLINE | TERMINOLOGY FOR PAINT, RELATED COATINGS, MATERIALS, AND APPLICATIONS |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| TAPPI T 400 : 2011 | SAMPLING AND ACCEPTING A SINGLE LOT OF PAPER, PAPERBOARD, CONTAINERBOARD, OR RELATED PRODUCT |
| ASTM D 1732 : 2003 | Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
| ASTM E 2251 : 2014 : REDLINE | Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids |
| ASTM D 2176 : 2016 | Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester |
| ASTM D 5289 : 2017 : REDLINE | TEST METHOD FOR RUBBER PROPERTY - VULCANIZATION USING ROTORLESS CURE METERS |
| ASTM D 3267 : 2012 : REDLINE | Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method) |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| ASTM D 545 : 2014 : REDLINE | Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) |
| ASTM D 1781 : 1998 | Standard Test Method for Climbing Drum Peel for Adhesives |
| ASTM D 2197 : 2016 : REDLINE | Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| ASTM E 200 : 2016 : REDLINE | Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis |
| ASTM D 1921 : 2012-09 | TEST METHODS FOR PARTICLE SIZE (SIEVE ANALYSIS) OF PLASTIC MATERIALS |
| ASTM E 180 : 2003 | Standard Practice for Determining the Precision of ASTM Methods for Analysis and Testing of Industrial and Specialty Chemicals (Withdrawn 2009) |
| ASTM D 1533 : 2012 : REDLINE | Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| IEC 60172:2015 | Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires |
| ASTM D 661 : 1993 | Standard Test Method for Evaluating Degree of Cracking of Exterior Paints |
| ASTM D 662 : 1993 | Standard Test Method for Evaluating Degree of Erosion of Exterior Paints |
| ASTM B 344 : 2014 : REDLINE | Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements |
| ASTM D 3266 : 1991 : R2018 | Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) |
| TAPPI T 544 : 2008 | AGING OF PAPER AND BOARD WITH MOIST HEAT |
| IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| ASTM D 1968 : 2015 | Standard Terminology Relating to Paper and Paper Products |
| ISO 13000-1:2005 | Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 1: Requirements and designation |
| EN 1939 : 2003 | SELF ADHESIVE TAPES - DETERMINATION OF PEEL ADHESION PROPERTIES |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| ASTM D 985 : 1997 | Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm) |
| ASTM D 2939 : 2003 | Standard Test Methods for Emulsified Bitumens Used as Protective Coatings (Withdrawn 2012) |
| ASTM D 1735 : 2014 : REDLINE | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ASTM C 778 : 2017 : REDLINE | Standard Specification for Standard Sand |
| ASTM D 5750/D5750M : 1995 | Standard Guide for Width and Length of Pressure-Sensitive Tape |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| TAPPI T 401 : 2015 | FIBER ANALYSIS OF PAPER AND PAPERBOARD |
| ASTM D 907 : 2015 : REDLINE | Standard Terminology of Adhesives |
| TAPPI T 511 : 2013 | FOLDING ENDURANCE OF PAPER (MIT TESTER) |
| ASTM G 7 : 2005 | Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials |
| ASTM E 337 : 2015 : REDLINE | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
| ASTM D 2755 : 1990 : R1997 : EDT 1 | Standard Test Method of Sampling and Reduction to Test Weight of Electrical Grade Magnesium Oxide (Withdrawn 2003) |
| ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| ASTM D 1639 : 1990 : R1996 : EDT 1 | Standard Test Method for Acid Value of Organic Coating Materials (Withdrawn 2005) |
| ASTM D 3180 : 2015 : REDLINE | Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases |
| ASTM E 137 : 1982 : R1987 | Practice for Evaluation of Mass Spectrometers for Quantitative Analysis from a Batch Inlet (Withdrawn 1992) |
| ASTM F 913 : 2002 : EDT 1 | Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe |
| ASTM D 2122 : 2016 : REDLINE | Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings |
| ASTM D 3224 : 2002 | Standard Test Method for Water Solubility of Auxiliary Solvent for Wood Preserving Solutions (Withdrawn 2006) |
| ASTM D 5386 : 2016 : REDLINE | Standard Test Method for Color of Liquids Using Tristimulus Colorimetry |
| ASTM D 3835 : 2016 : REDLINE | Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer |
| ASTM D 1211 : 1997 | Standard Test Method for Temperature-Change Resistance of Clear Nitrocellulose Lacquer Films Applied to Wood (Withdrawn 2006) |
| ASTM D 257 : 2014 : REDLINE | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| ASTM D 2204 : 1965 : R1970 | Method of Test for Perspiration Resistance of Organic Coatings (Withdrawn 1975) |
| PPP-C-2020 Revision A:1994 | CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| ASTM D 2565 : 2016 : REDLINE | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
| TAPPI T 452 : 2008 | BRIGHTNESS OF PULP, PAPER AND PAPERBOARD (DIRECTIONAL REFLECTANCE AT 457 NM) |
| MIL-P-46105 Base Document:1966 | PRIMER COATING: WELD-THROUGH, ZINC-RICH |
| ASTM D 2246 : 1987 | Standard Method of Testing Finishes on Primed Metallic Substrates for Humidity-Thermal Cycle Cracking (Withdrawn 1992) |
| ASTM E 203 : 2016 : REDLINE | Standard Test Method for Water Using Volumetric Karl Fischer Titration |
| ASTM D 1474 : 1998 | Standard Test Methods for Indentation Hardness of Organic Coatings |
| ASTM D 2606 : 1994 : R2000 | Standard Test Method for Solubility of Pentachlorophenol in Heavy Hydrocarbon Solvents (Withdrawn 2006) |
| ASTM D 658 : 1991 | Standard Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive (Withdrawn 1996) |
| ASTM D 4483 : 2014-02 | PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES |
| ASTM D 685 : 2017 : REDLINE | Standard Practice for Conditioning Paper and Paper Products for Testing |
| ASTM D 2090 : 1998 | Standard Test Method for Clarity and Cleanness of Paint and Ink Liquids (Withdrawn 2007) |
| TAPPI T 425 : 2011 | OPACITY OF PAPER (15/D GEOMETRY, ILLUMINANT A/2 DEGREES, 89% REFLECTANCE BACKING AND PAPER BACKING) |
| ISO 13000-2:2005 | Plastics Polytetrafluoroethylene (PTFE) semi-finished products Part 2: Preparation of test specimens and determination of properties |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| ASTM D 542 : 2014 : REDLINE | Standard Test Method for Index of Refraction of Transparent Organic Plastics |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM D 2454 : 2014-03 | PRACTICE FOR DETERMINING THE EFFECT OF OVERBAKING ON ORGANIC COATINGS |
| TAPPI T 410 : 2013 | GRAMMAGE OF PAPER AND PAPERBOARD (WEIGHT PER UNIT AREA) |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 3270 : 2013 : REDLINE | Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method) |
| ASTM D 374 : 1999 | Standard Test Methods for Thickness of Solid Electrical Insulation |
| ASTM D 589 : 1997 | Standard Test Method for Opacity of Paper (15°Diffuse Illuminant A, 89% Reflectance Backing and Paper Backing) |
| ASTM D 3892 : 2015 : REDLINE | PRACTICE FOR PACKAGING/PACKING OF PLASTICS |
| ASTM D 5423 : 2014 | Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation |
| ISO 2322:2014 | Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures |
Hardcopy - Russian
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.