• There are no items in your cart

HB 18.28-1991

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products
Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

06-26-2021

Language(s)

English

Published date

01-01-1991

Preview

1 - SAA HB18.28-1991 GUIDE 28-GENERAL RULES FOR A MODEL THIRD-PARTY CERTIFICATION SYSTEM FOR PRODUCTS
4 - PREFACE
5 - 0 Introduction
5 - 1 References
5 - 2 Definitions
5 - 3 Basic conditions
5 - 4 Application for licence
6 - 5 Initial inspection of factory and quality management system, and initial testing
6 - 5.1 General
6 - 5.2 Assessment of factory quality management system
6 - 5.3 Initial testing
6 - 5.3.1 Selection ofsamples
6 - 5.3.2 Conduct of initial testing
7 - 5.3.3 Use of test data produced by other than the certification body
7 - 6 Licensing
7 - 7 Extending a licence
7 - 8 Surveillance
7 - 9 Use of a mark of conformity and marking
7 - 9.1 Mark of conformity
8 - 9.2 Marking
8 - 10 Publicity by licensees
8 - 11 Confidentiality
8 - 12 Misuse of a certificate or mark of conformity
8 - 13 Suspension of a licence for a product
9 - 14 Withdrawal/Cancellation
9 - 15 Corrective action
10 - 16 Implementation of modifications of a standard
10 - 17 Liability
10 - 18 Dispute
10 - 19 Fees
11 - Annex A - Checklist for basic content of Specific Rules
12 - Annex B
13 - Appendix 1 to annex B - Specimen for initial questionnaire for factory assessment
13 - Section 1 - Factory organization
14 - Section 2 - Materials, components and services
14 - Section 3 - Manufacture
15 - Section 4 - Quality control and testing
15 - Section 5 - Records and documentation
15 - Section 6 - Application of indications of conformity
16 - Appendix 2 to annex B - Specimen of a certificate of conformity
17 - Annex C - Specimen of a licensing agreement for the use of a certificate or mark of conformity
17 - Article 1: Regulations for certification and inspection
17 - Article 2: Rights and obligations
17 - Article 3: Surveillance
17 - Article 4: Information on modifications in production
17 - Article 5: Complaints
17 - Article 6: Publ icity
18 - Article 7: Confidential ity
18 - Article 8: Payment
18 - Article 9: Agreement period
18 - Article 10: Withdrawal/cancellationof licence
18 - Article 11: Modification of product requirements
19 - Article 12: Liability
19 - Article 13: Appeal/di spute
20 - Appendix 1 to annex C - Specimen of form for a licence for the use of the certificates or mark of conformity

Identical to the ISO/IEC guides and provides information on product and third-party certification systems. Guidance is given on the establishment, general requirements for, and operation of calibration and testing laboratory accreditation systems. Identical with SANZ HB18.28-1991 and produced as a Joint Australian/New Zealand Standard.

Committee
QR-010
DocumentType
Handbook
ISBN
0 7262 6891 7
Pages
16
PublisherName
Standards Australia
Status
Superseded
SupersededBy
UnderRevision

Standards Relationship
ISO/IEC Guide 28:1982 Identical
ISO/IEC Guide 28:2004 Identical

In Australia First published as HB18.28-1991. In New Zealand First published as HB18.28-1991. In Australia First published as HB18.27-1991. In New Zealand First published as HB18.27-1991.

AS 1646.3-2000 Elastomeric seals for waterworks purposes - Material requirements for pipe joints seals used in water and wastewater applications with the exception of natural rubber and polyisoprene compounds
AS 3750.18-2002 Paints for steel structures Moisture cure urethane (single-pack) systems
AS/NZS 4671:2001 Steel reinforcing materials
AS 1281-2001 Cement mortar lining of steel pipes and fittings (Reconfirmed 2018)
AS 3565.5-2004 Meters for water supply - Water meters with two integral single check valves
AS/NZS 2908.1:2000 Cellulose-cement products Corrugated sheets (Reconfirmed 2020)
AS 1617.1-2003 Refractory bricks and shapes Fireclay
AS 3582.2-2001 Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace
AS 4751(INT)-2000 Electrogalvanized (zinc) coatings on ferrous open sections
AS 2740-2001 Wedge-type sockets
AS 5100.5-2004 Bridge design - Concrete
AS/NZS 4766(INT):2002 Polyethylene storage tanks for water and chemicals
AS/NZS 3584.1:2005 Diesel engine systems for underground coal mines Fire protected - Heavy duty
AS 1357.1-2004 Valves primarily for use in heated water systems - Protection valves
AS 1085.10-2002 Railway track material Rail anchors
AS/NZS 2009:2002 Glass beads for pavement-marking materials
AS 1901-2004 Electroplated coatings - Gold and gold alloys
AS 2945(INT)-2002 Batch-type washer/disinfectors for health care facilities
AS 1646.4-2005 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates
AS 2319-2001 Rigging screws and turnbuckles
AS 1332-2000 Conveyor belting - Textile reinforced (Reconfirmed 2016)
AS 1085.13-2002 Railway track material Spring fastening spikes for sleeper plates (Reconfirmed 2013)
AS 3600-2001 Concrete structures
AS 1410-2003 Sterilizers - Steam - Pre-vacuum
AS 1406-2004 Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017)
AS 2423-2002 Coated steel wire fencing products for terrestrial, aquatic and general use (Reconfirmed 2021)
AS 4139-2003 Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018)
AS 1085.18-2003 Railway track material Screw spikes and threaded inserts
AS 1731.2-2000 Refrigerated display cabinets General mechanical and physical requirements
ATS 5200.104-2005 Appliances (miscellaneous)
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS/NZS 4692.1:2005 Electric water heaters Energy consumption, performance and general requirements (Reconfirmed 2016)
AS/NZS 1546.3:2001 On-site domestic wastewater treatment units Aerated wastewater treatment systems
AS/NZS 3582.3:2002 Supplementary cementitious materials for use with portland and blended cement Amorphous silica
AS/NZS 4798(INT):2005 Polyethylene maintenance shafts
AS 4750(INT)-2000 Electrogalvanized (zinc) coatings on ferrous hollow sections
AS/NZS 1518:2002 External extruded high-density polyethylene coating system for pipes (Reconfirmed 2016)
AS 4728-2005 Electric resistance welded steel pipe for pressure purposes (Reconfirmed 2016)
AS/NZS 1314:2003 Prestressing anchorages (Reconfirmed 2016)
AS 1085.17-2003 Railway Track Material Steel Sleepers (Reconfirmed 2013)
AS/NZS 4999(INT):2003 PVC-U maintenance shafts
AS/NZS 1594:2002 Hot-rolled steel flat products (Reconfirmed 2016)
AS 3775.1-2004 Chain slings - Grade T Product specification
AS/NZS 4130:2003 Polyethylene (PE) pipes for pressure applications
AS/NZS 4765(INT):2000 Modified PVC (PVC-M) pipes for pressure applications
AS 1085.2-2002 Railway track material Fishplates
AS 3565.2-2004 Meters for water supply - Combination meters
AS 1418.10(INT)-2004 Cranes, hoists and winches Elevating work platforms
AS 4506-2005 Metal finishing - Thermoset powder coatings
AS 1085.3-2002 Railway track material Sleeper plates (Reconfirmed 2013)
AS 1646.1-2000 Elastomeric seals for waterworks purposes - General requirements
AS/NZS 3584.3:2005 Diesel engine systems for underground coal mines - Maintenance
AS 1472-2003 Carbon steel spring wire for mechanical springs
AS 4321-2001 Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019)
AS 3743-2003 Potting mixes
AS 1085.14-2003 Railway track material Prestressed concrete sleepers
AS/NZS 4130:2001 Polyethylene (PE) pipes for pressure applications
AS 1085.1-2002 Railway track material Steel rails (Reconfirmed 2013)
AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
AS/NZS 4131:2003 Polyethylene (PE) compounds for pressure pipes and fittings
AS/NZS 4067:2004 Firefighters' helmets
AS 1443-2004 Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022)
AS 1085.4-2002 Railway track material Fishbolts and nuts (Reconfirmed 2013)
AS/NZS 1221:1997 Fire hose reels (Reconfirmed 2020)
AS/NZS 1605:2000 Methods for sampling and analysing timber preservatives and preservative-treated timber
AS 4795-2002 Double-flanged butterfly valves for waterworks purposes
AS/NZS 4065:2000 Concrete utility services poles
AS/NZS 2699.3:2000 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 2913-2000 Evaporative airconditioning equipment (Reconfirmed 2016)
AS 5039-2003 Security screen doors and security window grilles
AS 2266-2002 Carbon steel spring wire for bedding and seating
ATS 5200.101-2005 Appliances (low hazard rating)
AS/NZS 4677:2000 Steel utility services poles
AS 2192-2002 Sterilizers - Steam - Downward-displacement
AS/NZS 4129:2000 Fittings for polyethylene (PE) pipes for pressure applications
AS 1856-2004 Electroplated coatings - Silver
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
AS/NZS 4158:2003 Thermal-bonded polymeric coatings on valves and fittings for water industry purposes
AS 4049.3-2005 Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016)
AS/NZS 2280:2004 Ductile iron pipes and fittings
AS/NZS 1254:2002 PVC pipes and fittings for storm and surface water applications
AS 1192-2004 Electroplated coatings - Nickel and chromium (Reconfirmed 2017)
AS 6401-2003 Knife-gate valves for waterworks purposes (Reconfirmed 2015)
AS 2429-2004 Electroplated coatings of rhodium for general engineering applications
AS 2638.1-2002 Gate valves for waterworks purposes Metal seated
AS 4441(INT)-2003 Oriented PVC (PVC-O) pipes for pressure applications
AS 4454-2003 Composts, soil conditioners and mulches
AS/NZS 2699.3:2002 Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS/NZS 2699.2:2000 Built-in components for masonry construction Connectors and accessories
AS/NZS 3718:2003 Water supply - Tap ware
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
AS 1085.7-2003 Railway track material Spring washers
AS 1085.1-2000 Railway permanent way material Steel rails
ATS 5200.105-2005
AS 1394-2001 Round steel wire for ropes
AS 1646.2-2000 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Specifies by prescription formulation
AS 1085.19-2003 Railway track material Resilient fastening assemblies (Reconfirmed 2013)
AS/NZS 4131:2001 Polyethylene (PE) compounds for pressure pipes and fittings
AS 2321-2001 Short-link chain for lifting purposes
AS 1324.1-2001 Air filters for use in general ventilation and airconditioning Application, performance and construction
AS 4750-2003 Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017)
AS 2638.2-2002 Gate valves for waterworks purposes - Resilient seated
AS 3952-2002 Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015)
AS 4738.1-2004 Metal castings - Ferrous sand moulded
AS 4796-2001 Water supply - Metal bodied and plastic bodied ball valves for property service connection
AS/NZS 3584.2:2003 Diesel engine systems for underground coal mines - Explosion protected
AS 1085.8-2002 Railway track material Dogspikes
AS 4310-2004 DN 80 piston type vacuum interface valves for municipal sewer systems
AS 3565.3-2004 Meters for water supply - Water meters with integral dual check valves
AS/NZS 2699.1:2000 Built-in components for masonry construction Wall ties
AS/NZS 4859.1:2002 Materials for the thermal insulation of buildings General criteria and technical provisions
AS 4381-2002 Single-use face masks for use in health care
AS 4314-2005 Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
AS 1085.12-2002 Railway track material Insulated joint assemblies (Reconfirmed 2013)
AS 1085.3-2000 Railway permanent way material - Part 3: Sleeper plates
AS 1397-2001 Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS 2453-2004 Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017)
AS 4794-2001 Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015)
AS 3705-2003 Geotextiles - Identification, marking, and general data
AS 2741-2002 Shackles
AS 1579-2001 Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018)
AS 3850-2003 Tilt-up concrete construction
AS/NZS 1260:2002 PVC-U pipes and fittings for drain, waste and vent application
AS 3818.1-2003 Timber - Heavy structural products - Visually graded General requirements

View more information
US$48.59
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.