• There are no items in your cart

I.S. EN 12079-3:2006

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 3: PERIODIC INSPECTION, EXAMINATION AND TESTING
Available format(s)

Hardcopy , PDF

Superseded date

07-23-2013

Language(s)

English

Published date

01-01-2006

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Container inspection plate
6 Schedule of periodic inspection/examination and test
   - containers
7 Container lifting test
   7.1 General
   7.2 Test equipment and calibration
8 Non-destructive examination of welds
   8.1 General
   8.2 Non-destructive examination (NDE) methods
   8.3 Non-Destructive Examination (NDE) Operators
9 Visual inspection
   9.1 General
   9.2 Markings
   9.3 Welds
   9.4 Pad eyes and lashing points
   9.5 Structure
   9.6 Door closures
   9.7 Floor
10 Marking of the inspection plate
11 Inspection report
12 Pre-trip inspections
13 Record keeping
14 Damage and repair procedures
15 Schedule of inspection/examination and test
   - Lifting sets
   15.3 Load testing of chain sling legs
   15.4 Non-destructive examination of sling components
        except wire rope legs
   15.6 Marking of the lifting set identification tag
   15.7 Inspection report
   15.8 Record keeping
   15.9 Damage and repair procedures
16 Inspection of attachment of lifting set to an
   offshore container
   16.1 Attachment
   16.2 Inspection report
   16.3 Record keeping
Annex A (informative) Recommended knowledge and experience
        of staff responsible for inspection of offshore
        containers
Annex B (informative) Recommended knowledge and experience
        of staff responsible for inspection of lifting sets
        intended for use with offshore containers
Bibliography

States requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with EN 12079-1, with maximum gross mass not exceeding 25000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships.

DevelopmentNote
Together with I.S. EN 12079-1 supersedes I.S. EN 12079. (07/2006)
DocumentType
Standard
Pages
21
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
DIN EN 12079-3:2006-07 Identical
NEN EN 12079-3 : 2006 Identical
BS EN 12079-3:2006 Identical
NS EN 12079-3 : 1ED 2006 Identical
UNI EN 12079-3 : 2006 Identical
NF EN 12079-3 : 2006 Identical
SN EN 12079-3 : 2006 Identical
EN 12079-3 : 2006 Identical
NBN EN 12079-3 : 2006 Identical

EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005)
EN 30042 : 1994 ARC WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS
ISO 10042:2005 Welding Arc-welded joints in aluminium and its alloys Quality levels for imperfections
EN 12079-1 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 1: OFFSHORE CONTAINERS - DESIGN, MANUFACTURE AND MARKING
EN 1714:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS
EN 473:2008 Non-destructive testing - Qualification and certification of NDT personnel - General principles
EN 818-4:1996+A1:2008 Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 3834-2:2005 Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements
ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
EN 1289:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - PENETRANT TESTING OF WELDS - ACCEPTANCE LEVELS
EN 1712:1997/A2:2004 NON-DESTRUCTIVE TESTING OF WELDS - ULTRASONIC TESTING OF WELDED JOINTS - ACCEPTANCE LEVELS
EN 12079-2 : 2006 OFFSHORE CONTAINERS AND ASSOCIATED LIFTING SETS - PART 2: LIFTING SETS - DESIGN, MANUFACTURE AND MARKING
EN 818-6:2000+A1:2008 Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer
EN 13414-2:2003+A2:2008 Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer
EN 12517-1:2006 Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
EN 1291:1998/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - MAGNETIC PARTICLE TESTING OF WELDS - ACCEPTANCE LEVELS
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
EN 970:1997 Non-destructive examination of fusion welds - Visual examination
EN 1290:1998/A2:2003 NON-DESTRUCTIVE EXAMINATION OF WELDS - MAGNETIC PARTICLE EXAMINATION OF WELDS
EN 1435:1997/A2:2003 NON-DESTRUCTIVE TESTING OF WELDS - RADIOGRAPHIC TESTING OF WELDED JOINTS
EN ISO/IEC 17020:2012 Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012)

View more information
US$58.10
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.