• There are no items in your cart

I.S. EN 16851:2017

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

CRANES - LIGHT CRANE SYSTEMS
Available format(s)

Hardcopy , PDF

Withdrawn date

06-30-2021

Language(s)

English

Published date

01-01-2017

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Fitness for purpose testing
7 Information for use
Annex A (informative) - Guidance for specifying the
        operating duty
Annex B (normative) - Actions on supporting structures
        and installation dimensions
Annex C (normative) - Noise test code
Annex D (informative) - Selection of a suitable set of European
        Standards for cranes in a given application
Annex ZA (informative) - Relationship between this European
         Standard and the essential requirements of Directive
         2006/42/EC aimed to be covered
Bibliography

Pertains to: - light crane systems, either suspended or free-standing systems; - pillar jib cranes; - wall-mounted jib crane.

DocumentType
Standard
Pages
56
PublisherName
National Standards Authority of Ireland
Status
Withdrawn
SupersededBy

Standards Relationship
EN 16851:2017 Identical

ISO 11202:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections
EN 13001-3-2:2014 Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in reeving systems
EN 13557:2003+A2:2008 Cranes - Controls and control stations
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
ISO 11660-5:2001 Cranes — Access, guards and restraints — Part 5: Bridge and gantry cranes
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
ISO 15513:2000 Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors
EN 13155:2003+A2:2009 Cranes - Safety - Non-fixed load lifting attachments
ISO 12480-1:1997 Cranes Safe use Part 1: General
ISO 9926-1:1990 Cranes Training of drivers Part 1: General
EN 12644-2:2000+A1:2008 Cranes - Information for use and testing - Part 2: Marking
ISO 4306-1:2007 Cranes — Vocabulary — Part 1: General
ISO 7752-4:1989 Cranes Controls Layout and characteristics Part 4: Jib cranes
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
ISO 14120:2015 Safety of machinery Guards General requirements for the design and construction of fixed and movable guards
IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
EN 755-9:2016 Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
EN 14502-1:2010 Cranes - Equipment for the lifting of persons - Part 1: Suspended baskets
EN 14502-2:2005+A1:2008 Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations
EN 13001-3-5:2016 Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks
EN 13852-2:2004 Cranes - Offshore cranes - Part 2: Floating cranes
EN 1991-3:2006/AC:2012 EUROCODE 1 - ACTIONS ON STRUCTURES - PART 3: ACTIONS INDUCED BY CRANES AND MACHINERY
EN 349:1993+A1:2008 Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
IEC 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN 13586:2004+A1:2008 Cranes - Access
EN 614-1:2006+A1:2009 Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
EN ISO 13857:2008 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
ISO 12482:2014 Cranes Monitoring for crane design working period
EN 12644-1:2001+A1:2008 Cranes - Information for use and testing - Part 1: Instructions
ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
EN 14439:2006+A2:2009 Cranes - Safety - Tower cranes
EN 60204-32:2008 Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines
EN ISO 11201:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
EN 13001-2:2014 Crane safety - General design - Part 2: Load actions
EN 15011:2011+A1:2014 Cranes - Bridge and gantry cranes
ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
EN 14985:2012 Cranes - Slewing jib cranes
EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
EN 13001-1:2015 Cranes - General design - Part 1: General principles and requirements
EN ISO 3744:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
EN 515:2017 Aluminium and aluminium alloys - Wrought products - Temper designations
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 11203:1995 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
EN 13157:2004+A1:2009 Cranes - Safety - Hand powered cranes
EN 14492-2:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
EN 14492-1:2006+A1:2009/AC:2010 CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015)
EN ISO 4871:2009 Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN ISO 14120:2015 Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO 14120:2015)
EN 14238:2004+A1:2009 Cranes - Manually controlled load manipulating devices
EN 13001-3-3:2014 Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts
EN 795:2012 Personal fall protection equipment - Anchor devices
EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
EN 13000:2010+A1:2014 Cranes - Mobile cranes
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
EN ISO 11202:2010 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
EN ISO 11203:2009 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators

View more information
US$83.31
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.