• There are no items in your cart

I.S. EN 60310:2016

Current
Current

The latest, up-to-date edition.

RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK
Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-01-2016

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

National Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Service conditions
6 Rated current and load profile
7 Rated voltage and power of transformer windings
8 Transformer tappings
9 Cooling
10 Temperature limits
11 Mechanical design
12 Rating plates
13 Tests
Annex A (informative) - List of items for which an
        agreement between purchaser and manufacturer
        is needed or for which further information or
        specifications shall be given by the purchaser or
        by the manufacturer
Annex B (informative) - Thermal ageing and insulation
        life time
Annex C (informative) - Example of thermal endurance
        calculation to demonstrate the suitability of an
        insulation system for a specified application
Annex D (informative) - Wet dielectric tests for dry-type
        transformers and inductors
Annex E (informative) - Load profiles
Bibliography
Annex ZA (normative) - Normative references to
         international publications with their
         corresponding European publications

Pertains to traction and auxiliary power transformers installed on board rolling stock and to the various types of power inductors inserted in the traction and auxiliary circuits of rolling stock, of dry or liquid-immersed design.

DevelopmentNote
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
162
PublisherName
National Standards Authority of Ireland
Status
Current

Standards Relationship
SN EN 60310 : 2016 Identical
NBN EN 60310 : 2016 Identical
UNE-EN 60310:2017 Identical
BS EN 60310:2016 Identical
IEC 60310:2016 Identical
NF EN 60310 : 2017 Identical
EN 60310:2016/AC:2018-03 Identical
DIN EN 60310 : 2017 COR 1 2018 Identical

IEC 60060-2:2010 High-voltage test techniques - Part 2: Measuring systems
IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
IEC 60076-7:2005 Power transformers - Part 7: Loading guide for oil-immersed power transformers
IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
EN 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
EN 60076-4:2002 Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
EN 60085:2008 Electrical insulation - Thermal evaluation and designation
IEC 61039:2008 Classification of insulating liquids
EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
EN 60076-5:2006 Power transformers - Part 5: Ability to withstand short-circuit
EN 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60076-10:2016 Power transformers - Part 10: Determination of sound levels
IEC 60076-18:2012 Power transformers - Part 18: Measurement of frequency response
EN 60076-11:2004 Power transformers - Part 11: Dry-type transformers
EN 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
IEC 60076-5:2006 Power transformers - Part 5: Ability to withstand short circuit
IEC 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
EN 61039 : 2008 CLASSIFICATION OF INSULATING LIQUIDS
IEC 60850:2014 Railway applications - Supply voltages of traction systems
IEC 61099:2010 Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes
EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
IEC 60076-4:1976 Power transformers - Part 4: Tappings and connections
IEC 60505:2011 Evaluation and qualification of electrical insulation systems
IEC 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
IEC 60076-12:2008 Power transformers - Part 12: Loading guide for dry-type power transformers
EN 60076-10:2016 Power transformers - Part 10: Determination of sound levels
IEC 60296:2012 RLV Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 60060-2:2011 High-voltage test techniques - Part 2: Measuring systems
IEC 60076-3:2013 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
IEC 60050-421:1990 International Electrotechnical Vocabulary (IEV) - Part 421: Power transformers and reactors
EN ISO 3746:2010 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
EN 60296:2012 Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
EN 60836:2015 Specifications for unused silicone insulating liquids for electrotechnical purposes
IEC 60076-1:2011 Power transformers - Part 1: General
IEC 60076-6:2007 Power transformers - Part 6: Reactors
EN 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
EN 60076-14:2013 Power transformers - Part 14: Liquid-immersed power transformers using high-temperature insulation materials
EN 60076-1:2011 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
EN ISO 9614-2 : 1996 ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 2: MEASUREMENT BY SCANNING
IEC 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
EN 60076-18 : 2012 POWER TRANSFORMERS - PART 18: MEASUREMENT OF FREQUENCY RESPONSE (IEC 60076-18:2012)
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60216-5:2008 Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material
EN 61378-1:2011 Convertor transformers - Part 1: Transformers for industrial applications
EN 60505:2011/AC:2017-03 EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS (IEC 60505:2011/COR1:2017)
IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 60076-2:2011 Power transformers - Part 2: Temperature rise for liquid-immersed transformers
EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
EN ISO 9614-1:2009 Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993)
IEC 60216-1:2013 Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
IEC 61378-1:2011 Converter transformers - Part 1: Transformers for industrial applications
IEC 62498-1:2010 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
EN 60076-6:2008 Power transformers - Part 6: Reactors

View more information
US$100.85
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.