I.S. EN 60794-1-1:2016
Current
The latest, up-to-date edition.
OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Graphical symbols and abbreviations
5 Optical fibre cables
6 Materials
7 Cable construction
8 Measuring methods
9 Related Technical Reports
Annex A (informative) - Guidelines for specific defined
applications and cabled fibre performance
Annex B (informative) - Guidelines for qualification
sampling
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Pertains to optical fibre cables for use with communication equipment and devices employing similar techniques and to cables having a combination of both optical fibres and electrical conductors.
DevelopmentNote |
Supersedes I.S. EN 187000. (06/2005) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
38
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
SupersededBy | |
Supersedes |
Standards | Relationship |
BS EN 60794-1-1:2016 | Identical |
UNE-EN 60794-1-1:2016 | Identical |
SN EN 60794-1-1 : 2016 | Identical |
NF EN 60794-1-1 : 2002 | Identical |
DIN EN 60794-1-1 : 2016 | Identical |
EN 60794-1-1:2016 | Identical |
EN 60793-1-46:2002 | Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance |
IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
EN 60793-1-21:2002 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
EN 60793-1-44:2011 | OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
IEC 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
IEC 60793-1-44:2011 | Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength |
IEC TR 62362:2010 | Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics - Guidance |
IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
EN 60793-2-50:2016 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
IEC TR 62222:2012 | Fire performance of communication cables installed in buildings |
IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
ISO/IEC 24702:2006 | Information technology Generic cabling Industrial premises |
ISO 14064-1:2006 | Greenhouse gases Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals |
IEC 60794-1-2:2017 | Optical fibre cables - Part 1-2: Generic specification - Basic optical cable test procedures - General guidance |
ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
EN 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
IEC 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
IEC 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
IEC 60811-202:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath |
EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
IEC 60794-1-24:2014 | Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods |
IEC TR 62283:2010 | Optical fibres - Guidance for nuclear radiation tests |
IEC TR 61282-3:2006 | Fibre optic communication system design guides - Part 3: Calculation of link polarization mode dispersion |
IEC 60793-1-46:2001 | Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance |
IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
IEC TR 61931:1998 | Fibre optic - Terminology |
IEC TR 62470:2011 | Guidance on techniques for the measurement of the coefficient of friction (COF) between cables and ducts |
ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
IEC 60793-1-21:2001 | Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry |
IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
IEC TR 62690:2014 | Hydrogen effects in optical fibre cables - Guidelines |
EN 60793-2:2016 | Optical fibres - Part 2: Product specifications - General |
IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
IEC TR 62691:2016 | Optical fibre cables - Guidelines to the installation of optical fibre cables |
EN 60811-203:2012 | Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions |
EN ISO 14064-1:2012 | Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2006) |
IEC 60811-201:2012+AMD1:2017 CSV | Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness |
IEC TR 62000:2010 | Guidance for combining different single-mode fibres types |
IEC 60794-1-23:2012 | Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods |
IEC 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
IEC 60793-1-48:2017 | Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.