• There are no items in your cart

I.S. EN 60895:2003

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

LIVE WORKING - CONDUCTIVE CLOTHING FOR USE AT NOMINAL VOLTAGE UP TO 800 KV A.C. AND +/- 600 KV D.C.
Available format(s)

Hardcopy , PDF

Superseded date

07-06-2020

Language(s)

English

Published date

01-01-2003

Preview

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.

Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Technical requirements
   4.1 General
   4.2 Technical requirements for conductive material
       4.2.1 Flame retardancy
       4.2.2 Electrical resistance
       4.2.3 Current-carrying capability
       4.2.4 Shielding and screening efficiencies
       4.2.5 Requirements to withstand cleaning
       4.2.6 Spark-discharge protection
   4.3 Specific requirements for component parts
       4.3.1 Conductive gloves, overshoe socks and
             socks
       4.3.2 Conductive footwear
       4.3.3 Conductive head cover and face screen
   4.4 Marking
   4.5 Packaging
   4.6 Manufacturer's instructions
5 Type tests of conductive material (specimen)
   5.1 Flame-retardancy test
       5.1.1 Principle of test
       5.1.2 Test apparatus
       5.1.3 Test specimens
       5.1.4 Test procedure
       5.1.5 Results
   5.2 Electrical resistance test
       5.2.1 Test equipment
       5.2.2 Preparation of test specimens
       5.2.3 Procedure
       5.2.4 Test results
   5.3 Current-carrying capability
       5.3.1 Test equipment
       5.3.2 Preparation of test specimens
       5.3.3 Procedure
       5.3.4 Test results
   5.4 Shielding efficiency
       5.4.1 Test equipment
       5.4.2 Test mounting
       5.4.3 Earth connection
       5.4.4 Line connection
       5.4.5 Test procedure
   5.5 Resistance to cleaning
       5.5.1 Laundering
       5.5.2 Dry-cleaning
       5.5.3 Acceptability of material
6 Type tests of garment
   6.1 General
   6.2 Electrical resistance
       6.2.1 Test procedure
       6.2.2 Measurement locations
       6.2.3 Acceptable values
7 Type tests of the complete clothing
   7.1 Bonding test
   7.2 Efficiency of conductive clothing
8 Type test of the component parts
   8.1 Conductive gloves and mitts
   8.2 Conductive overshoe socks and normal socks
   8.3 Conductive footwear
   8.4 Conductive head cover and face screen
9 Routine tests
   9.1 Parts of conductive clothing from a single
       manufacturer
   9.2 Parts of conductive clothing from multiple
        manufacturers
10 Acceptance checks and tests
11 Modification
Annex A (normative) Suitable for live working (double
        triangle) (IEC-60417-5216)
Annex B (normative) Classification of tests
   B.1 Tests on conductive material
   B.2 Tests on the conductive garment
   B.3 Tests on the conductive component parts
   B.4 Tests on the complete clothing
Annex C (normative) Sampling procedure
   C.1 General
   C.2 Classification of defects
   C.3 General sampling plan
   C.4 Procedure when testing is carried out in a
       laboratory other than the manufacturer's
Annex D (informative) Electrodes for determining
        electrical resistance properties of material
        specimen and garments
   D.1 General
   D.2 Conductive paint
Annex E (informative) Recommendations for the in-service
        care, maintenance and periodic testing of
        conductive clothing and component parts
   E.1 Care, storage and repair
   E.2 Inspection before use
   E.3 Non-destructive periodic testing
Bibliography

Applies to conductive clothing, either assembled from component parts or forming a single complete clothing, worn by (electrically) skilled persons during live working (especially bare-hand working) at a nominal power system voltage up to 800 kV a.c. and +/- 600 kV d.c.

DevelopmentNote
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
DocumentType
Standard
Pages
96
PublisherName
National Standards Authority of Ireland
Status
Superseded
SupersededBy

Standards Relationship
DIN EN 60895 : 2004 Identical
EN 60895:2003 Identical
NBN EN 60895 : 2005 Identical
NF EN 60895 : 2004 Identical
BS EN 60895:2003 Identical
SN EN 60895 : 1996 Identical
UNE-EN 60895:2005 Identical
IEC 60895:2002 Identical

IEC 61477:2009 Live working - Minimum requirements for the utilization of tools, devices and equipment
ISO 3290:2001 Rolling bearings Balls Dimensions and tolerances
EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance
ISO 3175-2:2010 Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene
IEC 60212:2010 Standard conditions for use prior to and during the testing of solid electrical insulating materials
ISO 6330:2012 Textiles Domestic washing and drying procedures for textile testing
HD 384.2 : 200S2 INTERNATIONAL ELECTROTECHNICAL VOCABULARY - ELECTRICAL INSTALLATIONS OF BUILDINGS
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
HD 437 : 200S1 STANDARD CONDITIONS FOR USE PRIOR TO AND DURING THE TESTING OF SOLID ELECTRICAL INSULATING MATERIALS
IEC 60743:2013 Live working - Terminology for tools, devices and equipment
EN 60743:2013 Live working - Terminology for tools, devices and equipment
ISO 3175-1:2010 Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 1: Assessment of performance after cleaning and finishing
ISO 3175-3:2003 Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents
ISO 3175-4:2003 Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning
EN 61477:2009/corrigendum:2010 LIVE WORKING - MINIMUM REQUIREMENTS FOR THE UTILIZATION OF TOOLS, DEVICES AND EQUIPMENT
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
IEC 61318:2007 Live working - Conformity assessment applicable to tools, devices and equipment
ISO 9001:2015 Quality management systems — Requirements
ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
IEC 60050-651:2014 International Electrotechnical Vocabulary (IEV) - Part 651: Live working
EN ISO 6330:2012 Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012)
EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)

View more information
US$142.51
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.