I.S. EN 61784-3-12:2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF
01-11-2020
English
01-01-2010
FOREWORD
0 Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols, abbreviated terms
and conventions
4 Overview of FSCP 12/1 (Safety-over EtherCAT[TM])
5 General
6 Safety communication layer services
7 Safety communication layer protocol
8 Safety communication layer management
9 System requirements
10 Assessment
Annex A (informative) Additional information for
functional safety communication profiles of
CPF 12
Annex B (informative) Information for assessment of
the functional safety communication profiles
of CPF 12
Bibliography
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Defines a safety communication layer (services and protocol) based on CPF 12 of IEC 61784-2 and IEC 61158 Type 12. It identifies the principles for functional safety communications defined in IEC 61784-3 that are relevant for this safety communication layer.
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
103
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
IEC 61784-3-12:2010 | Identical |
EN 61784-3-12:2010 | Identical |
EN 61326-3-2:2008 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - Industrial applications with specified electromagnetic environment |
IEC 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
EN 61784-3:2016/A1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 3: FUNCTIONAL SAFETY FIELDBUSES - GENERAL RULES AND PROFILE DEFINITIONS (IEC 61784-3:2016/A1:2017) |
IEC TR 62210:2003 | Power system control and associated communications - Data and communication security |
EN 61131-2:2007 | Programmable controllers - Part 2: Equipment requirements and tests |
ISO 10218-1:2011 | Robots and robotic devices Safety requirements for industrial robots Part 1: Robots |
EN 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
IEC 61326-3-2 : 2.0 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-2: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - INDUSTRIAL APPLICATIONS WITH SPECIFIED ELECTROMAGNETIC ENVIRONMENT |
NFPA 79 : 2015 | ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY |
IEC 61326-3-1 : 2.0 | ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - EMC REQUIREMENTS - PART 3-1: IMMUNITY REQUIREMENTS FOR SAFETY-RELATED SYSTEMS AND FOR EQUIPMENT INTENDED TO PERFORM SAFETY-RELATED FUNCTIONS (FUNCTIONAL SAFETY) - GENERAL INDUSTRIAL APPLICATIONS |
ISA 84.00.01-1 : 2004 | FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
IEC TS 61000-1-2:2008 | Electromagnetic compatibility (EMC) - Part 1-2: General - Methodology for the achievement of functional safety of electrical and electronic systems including equipment with regard to electromagnetic phenomena |
EN 61158-3-12:2014 | Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
IEC 61158-3-12:2014 | Industrial communication networks - Fieldbus specifications - Part 3-12: Data-link layer service definition - Type 12 elements |
IEC 61158-4-12:2014 | Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
IEC 61508-5:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels (see Functional Safety and IEC 61508) |
IEC 61508-4:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations (see Functional Safety and IEC 61508) |
IEC 61131-6:2012 | Programmable controllers - Part 6: Functional safety |
IEC 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
IEC 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
ISO/IEC Guide 51:2014 | Safety aspects Guidelines for their inclusion in standards |
IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
ISO/IEC 19501:2005 | Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2 |
IEC 62280-2:2002 | Railway applications - Communication, signalling and processing systems - Part 2: Safety-related communication in open transmission systems |
EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
ISO 14121:1999 | Safety of machinery Principles of risk assessment |
ISA 84.00.01-3 : 2004 | FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 3: GUIDANCE FOR THE DETERMINATION OF THE REQUIRED SAFETY INTEGRITY LEVELS - INFORMATIVE |
ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
EN 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
EN 61158-2:2014 | Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition |
ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
ISO/IEC 2382-14:1997 | Information technology Vocabulary Part 14: Reliability, maintainability and availability |
ISO/IEC 2382-16:1996 | Information technology Vocabulary Part 16: Information theory |
ISA 84.00.01-2 : 2004 | FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 2: GUIDELINES FOR THE APPLICATION OF ANSI/ISA-84.00.01 - PART 1 - INFORMATIVE |
IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
EN 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
IEC TR 62059-11:2002 | Electricity metering equipment - Dependability - Part 11: General concepts |
EN 61326-3-1:2017 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) - General industrial applications |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
IEC 61000-6-2 : 3.0:2016 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
IEC 62280-1:2002 | Railway applications - Communication, signalling and processing systems - Part 1: Safety-related communication in closed transmission systems |
EN 61158-4-12:2014 | Industrial communication networks - Fieldbus specifications - Part 4-12: Data-link layer protocol specification - Type 12 elements |
IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
IEC 61784-3:2016+AMD1:2017 CSV | Industrial communication networks - Profiles - Part 3: Functional safety fieldbuses - General rules and profile definitions |
IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.