I.S. EN 61800-7-301:2016
Current
The latest, up-to-date edition.
ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-301: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 1 TO NETWORK TECHNOLOGIES
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
4 General
5 Mapping to CANopen
6 Mapping to CC-Link IE Field Network
7 Mapping to EPA
8 Mapping to EtherCAT
9 Mapping to ETHERNET Powerlink
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Defines the mapping of the profile type 1 (CiA 402) specified in IEC 61800-7-201 onto different network technologies.
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
332
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
EN 61800-7-301:2016 | Identical |
IEC 61158-6-14:2014 | Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements |
IEC 61158-5-13:2014 | Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements |
IEC 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
EN 61158-5-13:2014 | Industrial communication networks - Fieldbus specifications - Part 5-13: Application layer service definition - Type 13 elements |
IEC 61800-7-303:2015 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
EN 61800-7-303:2016 | Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network technologies |
IEC 61800-7-1:2015 | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition |
EN 61158-5-14:2014 | Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements |
EN 61800-7-304:2016 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
EN 61800-7-302:2016 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
EN 61499-1:2013 | Function blocks - Part 1: Architecture |
IEC 61800-7-204:2015 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
IEC 61800-7-302:2015 | Adjustable speed electrical power drive systems - Part 7-302: Generic interface and use of profiles for power drive systems - Mapping of profile type 2 to network technologies |
EN 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
EN 61800-7-202:2016 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
IEC 61800-7-304:2015 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
IEC 61158-6-13:2014 | Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements |
IEC TR 62390:2005 | Common automation device - Profile guideline |
EN 61800-7-201:2016 | Adjustable speed electrical power drive systems - Part 7-201: Generic interface and use of profiles for power drive systems - Profile type 1 specification |
IEC 61800-7-201 : 2.0 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-201: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - PROFILE TYPE 1 SPECIFICATION |
EN 61915-1:2008 | Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles |
ISO 15745-1:2003 | Industrial automation systems and integration Open systems application integration framework Part 1: Generic reference description |
IEC 61915-1:2007 | Low-voltage switchgear and controlgear - Device profiles for networked industrial devices - Part 1: General rules for the development of device profiles |
IEC 61158-5-14:2014 | Industrial communication networks - Fieldbus specifications - Part 5-14: Application layer service definition - Type 14 elements |
EN 61158-5-23:2014 | Industrial communication networks - Fieldbus specifications - Part 5-23: Application layer service definition - Type 23 elements |
IEC 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
EN 50325-4:2002 | Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 4: CANopen |
ISO/IEC 2382-15:1999 | Information technology Vocabulary Part 15: Programming languages |
IEC 61158-6-12:2014 | Industrial communication networks - Fieldbus specifications - Part 6-12: Application layer protocol specification - Type 12 elements |
EN 61158-6-14:2014 | Industrial communication networks - Fieldbus specifications - Part 6-14: Application layer protocol specification - Type 14 elements |
ISO/IEC 19501:2005 | Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2 |
EN 61158-6-13:2014 | Industrial communication networks - Fieldbus specifications - Part 6-13: Application layer protocol specification - Type 13 elements |
EN 61158-4-14:2014 | Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specification - Type 14 elements |
IEC 61158-4-14:2014 | Industrial communication networks - Fieldbus specifications - Part 4-14: Data-link layer protocol specificationn - Type 14 elements |
IEC 61800-7-203:2015 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
IEC 61499-1:2012 | Function blocks - Part 1: Architecture |
EN 61158-5-12:2014 | Industrial communication networks - Fieldbus specifications - Part 5-12: Application layer service definition - Type 12 elements |
EN 61800-7-1:2016 | Adjustable speed electrical power drive systems - Part 7-1: Generic interface and use of profiles for power drive systems - Interface definition |
EN 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
EN 61158-6-23:2014 | Industrial communication networks - Fieldbus specifications - Part 6-23: Application layer protocol specification - Type 23 elements |
EN 61800-7-204:2016 | Adjustable speed electrical power drive systems - Part 7-204: Generic interface and use of profiles for power drive systems - Profile type 4 specification |
EN 61784-1:2014 | Industrial communication networks - Profiles - Part 1: Fieldbus profiles |
IEC 61800-7-202:2015 | Adjustable speed electrical power drive systems - Part 7-202: Generic interface and use of profiles for power drive systems - Profile type 2 specification |
EN 61800-7-203:2016 | Adjustable speed electrical power drive systems - Part 7-203: Generic interface and use of profiles for power drive systems - Profile type 3 specification |
IEC 61784-2:2014 | Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.