I.S. EN ISO 14534:2015
Current
The latest, up-to-date edition.
OPHTHALMIC OPTICS - CONTACT LENSES AND CONTACT LENS CARE PRODUCTS - FUNDAMENTAL REQUIREMENTS (ISO 14534:2011)
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety and performance
5 Risk assessment
6 Design
7 Materials
8 Clinical evaluation
9 Manufacturing
10 Microbiological requirements
11 Packaging
12 Shelf-life and discard date
13 Labelling and information supplied by
the manufacturer
Bibliography
Annex ZA (informative) - Relationship between
this European Standard and the Essential
Requirements of EU Directive 93/42/EEC
on Medical Devices
Defines safety and performance requirements for contact lenses, contact lens care products, and other accessories for contact lenses.
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
NS EN ISO 14534 : 2015 | Identical |
BS EN ISO 14534:2015 | Identical |
ISO 14534:2011 | Identical |
NF EN ISO 14534 : 2015 | Identical |
NEN EN ISO 14534 : 2015 | Identical |
NBN EN ISO 14534 : 2015 | Identical |
UNI EN ISO 14534 : 2011 | Identical |
EN ISO 14534:2015 | Identical |
UNE-EN ISO 14534:2015 | Identical |
SN EN ISO 14534:2015 | Identical |
DIN EN ISO 14534:2015-08 | Identical |
ISO 13408-4:2005 | Aseptic processing of health care products — Part 4: Clean-in-place technologies |
ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
ISO 18369-1:2017 | Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications |
ISO 10993-3:2014 | Biological evaluation of medical devices — Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity |
ISO 9394:2012 | Ophthalmic optics — Contact lenses and contact lens care products — Determination of biocompatibility by ocular study with rabbit eyes |
ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
ISO 11138-3:2017 | Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes |
ISO 13212:2014 | Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life |
EN 556-2:2015 | Sterilization of medical devices - Requirements for medical devices to be designated 'STERILE" - Part 2: Requirements for aseptically processed medical devices |
ISO 13408-2:2003 | Aseptic processing of health care products Part 2: Filtration |
ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
EN 868-5:2009 | Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods |
EN 868-4:2017 | Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods |
ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
ISO 11981:2009 | Ophthalmic optics Contact lenses and contact lens care products Determination of physical compatibility of contact lens care products with contact lenses |
ISO 11980:2012 | Ophthalmic optics — Contact lenses and contact lens care products — Guidance for clinical investigations |
EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
ISO/TR 14969:2004 | Medical devices Quality management systems Guidance on the application of ISO 13485: 2003 |
ISO 11140-3:2007 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
ISO 11986:2010 | Ophthalmic optics Contact lenses and contact lens care products Determination of preservative uptake and release |
EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
ISO 11985:1997 | Ophthalmic optics Contact lenses Ageing by exposure to UV and visible radiation (in vitro method) |
ISO 11138-2:2017 | Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes |
ISO 11135-1:2007 | Sterilization of health care products Ethylene oxide Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
ISO 13408-3:2006 | Aseptic processing of health care products Part 3: Lyophilization |
EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
ISO 11140-1:2014 | Sterilization of health care products Chemical indicators Part 1: General requirements |
EN 1041:2008+A1:2013 | Information supplied by the manufacturer of medical devices |
ISO 18472:2006 | Sterilization of health care products Biological and chemical indicators Test equipment |
ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
ISO 10993-10:2010 | Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization |
ISO 18369-2:2017 | Ophthalmic optics — Contact lenses — Part 2: Tolerances |
ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
ISO 13408-1:2008 | Aseptic processing of health care products — Part 1: General requirements |
ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
EN 1275:2005 | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) |
ISO 11978:2017 | Ophthalmic optics — Contact lenses and contact lens care products — Labelling |
ISO 9001:2015 | Quality management systems — Requirements |
ISO 12864:1997 | Ophthalmic optics Contact lenses Determination of scattered light |
ISO 18369-3:2017 | Ophthalmic optics — Contact lenses — Part 3: Measurement methods |
ISO 10993-9:2009 | Biological evaluation of medical devices Part 9: Framework for identification and quantification of potential degradation products |
ISO 11140-5:2007 | Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
ISO 14155:2011 | Clinical investigation of medical devices for human subjects Good clinical practice |
ISO/TS 19979:2014 | Ophthalmic optics Contact lenses Hygienic management of multipatient use trial contact lenses |
ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
ISO 14729:2001 | Ophthalmic optics — Contact lens care products — Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses |
ISO 14971:2007 | Medical devices Application of risk management to medical devices |
ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
EN 1040:2005 | Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1) |
ISO 13408-6:2005 | Aseptic processing of health care products Part 6: Isolator systems |
ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
ISO 11138-4:2017 | Sterilization of health care products — Biological indicators — Part 4: Biological indicators for dry heat sterilization processes |
ISO 18369-4:2017 | Ophthalmic optics — Contact lenses — Part 4: Physicochemical properties of contact lens materials |
EN 980:2008 | Symbols for use in the labelling of medical devices |
ISO 11987:2012 | Ophthalmic optics — Contact lenses — Determination of shelf-life |
ISO 11138-5:2017 | Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes |
EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
ISO 13408-5:2006 | Aseptic processing of health care products Part 5: Sterilization in place |
ISO 14730:2014 | Ophthalmic optics — Contact lens care products — Antimicrobial preservative efficacy testing and guidance on determining discard date |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.