|
ISO 16135:2006
|
Industrial valves Ball valves of thermoplastics materials
|
|
ISO/TR 10358:1993
|
Plastics pipes and fittings Combined chemical-resistance classification table
|
|
ISO 3213:2009
|
Polypropylene (PP) pipes Effect of time and temperature on the expected strength
|
|
ISO 1167-2:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
|
|
ISO 265-1:1988
|
Pipes and fittings of plastics materials Fittings for domestic and industrial waste pipes Basic dimensions: Metric series Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
|
|
ISO 1133-1:2011
|
Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method
|
|
ISO 10146:1997
|
Crosslinked polyethylene (PE-X) pipes Effect of time and temperature on the expected strength
|
|
ISO 4427-1:2007
|
Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General
|
|
ISO 6964:1986
|
Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification
|
|
ISO 14531-1:2002
|
Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes
|
|
ISO 1167-4:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies
|
|
ISO 9080:2012
|
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
|
|
ISO 13477:2008
|
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)
|
|
ISO 3:1973
|
Preferred numbers Series of preferred numbers
|
|
ISO 4433-1:1997
|
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method
|
|
ISO 4437-2:2014
|
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 2: Pipes
|
|
ISO 18553:2002
|
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
|
|
ISO 12230:2012
|
Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength
|
|
CEN/TR 15438:2007
|
Plastics piping systems - Guidance for coding of products and their intended uses
|
|
ISO 12162:2009
|
Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient
|
|
ISO 15853:1999
|
Thermoplastics materials Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
|
|
ISO 13478:2007
|
Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)
|
|
ISO 3126:2005
|
Plastics piping systems Plastics components Determination of dimensions
|
|
ISO 11922-1:1997
|
Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series
|
|
ISO 7-1:1994
|
Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation
|
|
HD 60364-1:2008/A11:2017
|
LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 1: FUNDAMENTAL PRINCIPLES, ASSESSMENT OF GENERAL CHARACTERISTICS, DEFINITIONS
|
|
ISO 16871:2003
|
Plastics piping and ducting systems Plastics pipes and fittings Method for exposure to direct (natural) weathering
|
|
ISO 472:2013
|
Plastics Vocabulary
|
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code)
|
|
ISO 4433-2:1997
|
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 2: Polyolefin pipes
|
|
ISO 1167-3:2007
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components
|
|
ISO 24033:2009
|
Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength
|
|
ISO 17885:2015
|
Plastics piping systems Mechanical fittings for pressure piping systems Specifications
|
|
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method
|
|
ISO 16138:2006
|
Industrial valves Diaphragm valves of thermoplastics materials
|
|
ISO 1183-2:2004
|
Plastics Methods for determining the density of non-cellular plastics Part 2: Density gradient column method
|
|
ISO 16137:2006
|
Industrial valves Check valves of thermoplastics materials
|
|
ISO 15512:2016
|
Plastics Determination of water content
|
|
ISO 11357-6:2008
|
Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
|
|
ISO 4065:1996
|
Thermoplastics pipes Universal wall thickness table
|
|
ISO 16136:2006
|
Industrial valves Butterfly valves of thermoplastics materials
|
|
ISO 497:1973
|
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
|
|
ISO 16139:2006
|
Industrial valves Gate valves of thermoplastics materials
|
|
ISO 13760:1998
|
Plastics pipes for the conveyance of fluids under pressure Miner's rule Calculation method for cumulative damage
|
|
ISO 10147:2011
|
Pipes and fittings made of crosslinked polyethylene (PE-X) Estimation of the degree of crosslinking by determination of the gel content
|
|
ISO 760:1978
|
Determination of water Karl Fischer method (General method)
|
|
ISO 21787:2006
|
Industrial valves Globe valves of thermoplastics materials
|
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics
|
|
EN 12099:1997
|
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
|
|
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
|
|
EN 712:1993
|
Thermoplastics piping systems - End-load bearing mechanical joints between pressure pipes and fittings - Test method for resistance to pull-out under constant longitudinal force
|
|
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
|
|
ISO 1167-1:2006
|
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method
|
|
ISO 2505:2005
|
Thermoplastics pipes — Longitudinal reversion — Test method and parameters
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.