I.S. EN ISO 16089:2015

Current

Current The latest, up-to-date edition.

Preview

MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014)

Publisher: National Standards Authority of Ireland

Published: 01-01-2015

Available Formats: PDF - English, Hardcopy - English
More Info on product formats

For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.

Table of Contents - (Show below) - (Hide below)

National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
6 Verification of the safety requirements and/or
  protective measures
7 Information for use
Annex A (normative) - Abrasive product guards
        work zone enclosures and their combinations
Annex B (informative) - Impact test for guards - Bursting
        test
Annex C (informative) - Impact test for guards - Projectile
        impact
Annex D (normative) - Clamping methods for abrasive
        products and safety requirements tool holding devices
Annex E (informative) - Noise reduction
Annex F (informative) - Noise emission determination
Annex G (normative) - Requirements for grinding machines
        for the machining of materials generating flammable
        and explosive dusts
Annex H (informative) - Measures for the use of flammable
        metalworking fluids
Annex I (informative) - Examples for the integration of
        extraction and fire extinguishing systems when
        using flammable metalworking fluids
Annex J (informative) - Functional safety - Example
        for rotational speed limit monitoring the
        wheel spindle
Annex K (informative) - MSO 3 (Optional special mode
        for manual intervention under restricted operating
        conditions) - Examples
Bibliography
Annex ZA (informative) - Relationship between this
         European Standard and the Essential
         Requirements of EU Directive 2006/42/EC

Abstract - (Show below) - (Hide below)

Defines the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of stationary grinding machines which are designed primarily to shape metal by grinding: Group 1 - Manually controlled grinding machines without power operated axes and without numerical control. Group 2 - Manually controlled grinding machines with power operated axes and limited numerically controlled capability, if applicable. And Group 3 - Numerically controlled grinding machines.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	National Standards Authority of Ireland
ProductNote	This standard is identical to EN ISO 16089 : 2015
Pages
ISBN

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
EN ISO 16089 : 2015 COR 2016	Identical
ISO 16089 : 2015	Identical
ISO 16089 : 2015	Identical

Standards Referencing This Book - (Show below) - (Hide below)

EN 1005-4 : 2005 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY
EN 13236 : 2010 + A1 2015	SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS
EN 12096 : 1997	MECHANICAL VIBRATION - DECLARATION AND VERIFICATION OF VIBRATION EMISSION VALUES
ISO 13855 : 2010	SAFETY OF MACHINERY - POSITIONING OF SAFEGUARDS WITH RESPECT TO THE APPROACH SPEEDS OF PARTS OF THE HUMAN BODY
ISO 11202 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
ISO 3834-1 : 2005(R2014)	QUALITY REQUIREMENTS FOR FUSION WELDING OF METALLIC MATERIALS - PART 1: CRITERIA FOR THE SELECTION OF THE APPROPRIATE LEVEL OF QUALITY REQUIREMENTS
EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
ISO 2592 : 2017-08	PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD
ISO 2553 : 2013	WELDING AND ALLIED PROCESSES - SYMBOLIC REPRESENTATION ON DRAWINGS - WELDED JOINTS
EN 894-3 : 2000 + A1 2008	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
IEC 61000-6-4:2006+AMD1:2010 CSV	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 4871 : 1996(R2013)	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
EN 12198-2 : 2002 + A1 2008	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 2: RADIATION EMISSION MEASUREMENT PROCEDURE
ISO 14119 : 2013	SAFETY OF MACHINERY - INTERLOCKING DEVICES ASSOCIATED WITH GUARDS - PRINCIPLES FOR DESIGN AND SELECTION
ISO 14122-3 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 3: STAIRS, STEPLADDERS AND GUARD-RAILS
ISO 3744:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
ISO 9606-2 : 2004(R2014)	QUALIFICATION TEST OF WELDERS - FUSION WELDING - PART 2: ALUMINIUM AND ALUMINIUM ALLOYS
ISO 14122-1 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 1: CHOICE OF FIXED MEANS AND GENERAL REQUIREMENTS OF ACCESS
EN 12413 : 2007 + A1 2011	SAFETY REQUIREMENTS FOR BONDED ABRASIVE PRODUCTS
ISO 11161 : 2007(R2015)	SAFETY OF MACHINERY - INTEGRATED MANUFACTURING SYSTEMS - BASIC REQUIREMENTS
ISO 20643:2005(R2014)	MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION
ISO TR 11688-1 : 1995(R2009)	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING
EN 894-2 : 1997 + A1 2008	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
ISO 14120 : 2015	SAFETY OF MACHINERY - GUARDS - GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS
ISO 10218-1 : 2011	ROBOTS AND ROBOTIC DEVICES - SAFETY REQUIREMENTS FOR INDUSTRIAL ROBOTS - PART 1: ROBOTS
ISO 3574 : 2012	COLD-REDUCED CARBON STEEL SHEET OF COMMERCIAL AND DRAWING QUALITIES
ISO 4413 : 2010(R2016)	HYDRAULIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
ISO 1083 : 2004	SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION
EN 614-2 : 2000 + A1 2008	SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS
ISO 9355-1 : 1999(R2015)	ERGONOMIC REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS
ISO 525 : 2013	BONDED ABRASIVE PRODUCTS - GENERAL REQUIREMENTS
IEC 60204-1 : 6.0:2016	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
EN 1005-1 : 2001 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS
ISO 11689 : 1996(R2017)	ACOUSTICS - PROCEDURE FOR THE COMPARISON OF NOISE-EMISSION DATA FOR MACHINERY AND EQUIPMENT
EN 1005-2 : 2003 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY
IEC 60825-1 : 3.0	SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS
ISO 14118 : 2000	SAFETY OF MACHINERY - PREVENTION OF UNEXPECTED START-UP
ISO 13851 : 2002(R2012)	SAFETY OF MACHINERY - TWO-HAND CONTROL DEVICES - FUNCTIONAL ASPECTS AND DESIGN PRINCIPLES
ISO 9606-1 : 2012(R2016)	QUALIFICATION TESTING OF WELDERS - FUSION WELDING - PART 1: STEELS
EN 13218 : 2002 COR 2010	MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES
ISO 6104 : 2005(R2014)	SUPERABRASIVE PRODUCTS - ROTATING GRINDING TOOLS WITH DIAMOND OR CUBIC BORON NITRIDE - GENERAL SURVEY, DESIGNATION AND MULTILINGUAL NOMENCLATURE
EN 614-1 : 2006 + A1 2009	SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
ISO 1052 : 1982	STEELS FOR GENERAL ENGINEERING PURPOSES
ISO 12100 : 2010(R2015)	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
ISO 14122-4 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 4: FIXED LADDERS
CR 1030-1 : 1995	HAND-ARM VIBRATION - GUIDELINES FOR VIBRATION HAZARDS REDUCTION - PART 1: ENGINEERING METHODS BY DESIGN OF MACHINERY
ISO 6103 : 2014	BONDED ABRASIVE PRODUCTS - PERMISSIBLE UNBALANCES OF GRINDING WHEELS AS DELIVERED - STATIC TESTING
ISO 13856-2 : 2013(R2018)	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 2: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE EDGES AND PRESSURE-SENSITIVE BARS
ISO 5817 : 2014	WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS
ISO 447 : 1984(R2015)	MACHINE TOOLS - DIRECTION OF OPERATION OF CONTROLS
ISO 14159 : 2002(R2018)	SAFETY OF MACHINERY - HYGIENE REQUIREMENTS FOR THE DESIGN OF MACHINERY
ISO 3746 : 2010(R2015)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
ISO 6361-2 : 2014	WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS - SHEETS, STRIPS AND PLATES - PART 2: MECHANICAL PROPERTIES
ISO 666 : 2012(R2018)	MACHINE TOOLS - MOUNTING OF GRINDING WHEELS BY MEANS OF HUB FLANGES
ISO 16156 : 2004(R2007)	MACHINE-TOOLS SAFETY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF WORK HOLDING CHUCKS
ISO 9355-3 : 2006(R2015)	ERGONOMIC REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS
ISO 19719 : 2010(R2015)	MACHINE TOOLS - WORK HOLDING CHUCKS - VOCABULARY
ISO 13857 : 2008(R2011)	SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS
ISO 4997 : 2015	COLD-REDUCED CARBON STEEL SHEET OF STRUCTURAL QUALITY
EN 12198-3 : 2002 + A1 2008	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 3: REDUCTION OF RADIATION BY ATTENUATION OR SCREENING
ISO 13854 : 2017	SAFETY OF MACHINERY - MINIMUM GAPS TO AVOID CRUSHING OF PARTS OF THE HUMAN BODY
EN 12198-1 : 2000 + A1 2008	SAFETY OF MACHINERY - ASSESSMENT AND REDUCTION OF RISKS ARISING FROM RADIATION EMITTED BY MACHINERY - PART 1: GENERAL PRINCIPLES
IEC 61029-2-10 : 1.0	SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PARTICULAR REQUIREMENTS FOR CUTTING-OFF GRINDERS
ISO 4414 : 2010(R2016)	PNEUMATIC FLUID POWER - GENERAL RULES AND SAFETY REQUIREMENTS FOR SYSTEMS AND THEIR COMPONENTS
ISO 15534-1 : 2000(R2011)	ERGONOMIC DESIGN FOR THE SAFETY OF MACHINERY - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE-BODY ACCESS INTO MACHINERY
IEC 61029-2-4 : 1.0	SAFETY OF TRANSPORTABLE MOTOR OPERATED ELECTRIC TOOLS - PARTICULAR REQUIREMENTS FOR BENCH GRINDERS
ISO 13850 : 2015	SAFETY OF MACHINERY - EMERGENCY STOP FUNCTION - PRINCIPLES FOR DESIGN
EN 1005-3 : 2002 + A1 2008	SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION
IEC 62061 : 1.2:2015	SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS
ISO 14122-2 : 2016	SAFETY OF MACHINERY - PERMANENT MEANS OF ACCESS TO MACHINERY - PART 2: WORKING PLATFORMS AND WALKWAYS
ISO 15607 : 2003	SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES
ISO 6316 : 2012	HOT-ROLLED STEEL STRIP OF STRUCTURAL QUALITY
ISO 13849-1 : 2015	SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN
ISO 15534-2 : 2000(R2011)	ERGONOMIC DESIGN FOR THE SAFETY OF MACHINERY - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS
IEC 61000-6-2 : 3.0:2016	ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
ISO 6385 : 2016	ERGONOMICS PRINCIPLES IN THE DESIGN OF WORK SYSTEMS
ISO 3522 : 2007(R2014)	ALUMINIUM AND ALUMINIUM ALLOYS - CASTINGS - CHEMICAL COMPOSITION AND MECHANICAL PROPERTIES
ISO 3755 : 1991	CAST CARBON STEELS FOR GENERAL ENGINEERING PURPOSES
ISO 3448 : 1992(R2018)	INDUSTRIAL LIQUID LUBRICANTS - ISO VISCOSITY CLASSIFICATION
EN 894-4 : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
ISO 11201 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
ISO 11204 : 2010(R2015)	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
IEC 61800-5-2 : 2.0	ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-2: SAFETY REQUIREMENTS - FUNCTIONAL
ISO 9355-2 : 1999(R2015)	ERGONOMIC REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 2: DISPLAYS
ISO 230-5 : 2000(R2013)	TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION
EN 894-1 : 1997 + A1 2008	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS

Add To Cart

Product Format

Quantity

add to cart

I.S. EN ISO 16089:2015

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?