IEC 60073 : 6.0

Current

Current The latest, up-to-date edition.

Add to Watchlist What is StandardsWatch?

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English - French

Published date: 05-22-2002

Publisher: International Electrotechnical Committee

Table of Contents - (Show below) - (Hide below)

FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 Coding principles
   4.1 General
   4.2 Visual codes
        4.2.1 Coding by colours
        4.2.2 Coding by shapes and/or position
        4.2.3 Coding by changing of characteristics
              over time
   4.3 Acoustic codes
   4.4 Tactile codes
5 Application requirements
   5.1 Indication modes
   5.2 Actuation modes
        5.2.1 Non-illuminated actuators
        5.2.2 Illuminated actuators
        5.2.3 Actuators as a part of pictorial
              presentation on a video display screen
Annex A (normative) Special requirements for mechanical
        indicators
Annex B (informative) Example for the application of
        indication coding (using colours)
Annex C (informative) Examples of visual, acoustic and
        tactile codes
Bibliography

Abstract - (Show below) - (Hide below)

Gives general rules for assigning particular meanings to certain visual, acoustic and tactile indications to increase the safety of persons, property and environment; facilitate the proper monitoring, control and maintenance of the equipment and to facilitate the rapid recognition of control conditions and actuator positions.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
Development Note	Supersedes IEC 60054 (03/2001) Stability Date: 2017. (10/2012)
Pages
ISBN
Committee	TC 16

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
CEI EN 60073 : 2003	Identical
NF EN 60073 : 2003	Identical
CEI 16-3 : 1989 COR 1990	Identical
UNE-EN 60073:2005	Identical
I.S. EN 60073:2002	Identical
SN EN 60073 : 2002	Identical
DS EN 60073 : 2003	Identical
PN EN 60073 : 2003	Identical
NEN EN IEC 60073 : 2002	Identical
BS EN 60073 : 2002	Identical
EN 60073 : 2002	Identical
GOST R IEC 60073 : 2000	Identical
DIN EN 60073:2003-05	Identical
VDE 0199:2003-05	Identical
JIS C 0448:1997	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

PREN 1422 : DRAFT 2011	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
09/30175681 DC : 0	BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
NFC 48 371 : 2010	ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - GENERAL REQUIREMENTS
BS EN 15571 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
DIN VDE 0660-100 : 1992	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
NBR IEC 60309-4 : 2017	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSE - PART 4: SWITCHED SOCKET-OUTLETS AND CONNECTORS WITH OR WITHOUT INTERLOCK
BS EN 16564 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
DIN EN 15503 E : 2016	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
BS EN 60519-4 : 2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS
17/30347375 DC : 0	BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS
BS EN 60945 : 2002	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
15/30259978 DC : 0	BS EN 62477-2 - SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 2: POWER ELECTRONIC CONVERTERS FROM 1000 V A.C. OR 1500 V D.C. UP TO 36 KV A.C. OR 54 KV D.C.
DIN EN ISO 13856-1 E : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
04/30080013 DC : DRAFT FEB 2004	EN 50131-1 - ALARM SYSTEMS - INTRUSION SYSTEMS - PART 1: SYSTEM REQUIREMENTS
14/30265073 DC : 0	BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
08/30182786 DC : DRAFT JULY 2008	BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
09/30207158 DC : 0	BS EN 62642-1 - ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
BS PD ISO/TR 22100-3 : 2016	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 3: IMPLEMENTATION OF ERGONOMIC PRINCIPLES IN SAFETY STANDARDS
12/30258456 DC : 0	BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
DD CLC/TS 50136-4 : 2004	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 4: ANNUNCIATION EQUIPMENT USED IN ALARM RECEIVING CENTERS
12/30262894 DC : 0	BS EN 14180 - STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
I.S. EN 60950-23:2008	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
BS EN 62744 : 2015	REPRESENTATION OF STATES OF OBJECTS BY GRAPHICAL SYMBOLS
DIN EN ISO 13856-1:2013-08	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
CEI EN 61227 : 1ED 2017	NUCLEAR POWER PLANTS - CONTROL ROOMS - OPERATOR CONTROLS
UNE EN 60598-2-22 : 2015	LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING
UNI EN 894-4 : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
BS EN 61227 : 2016	NUCLEAR POWER PLANTS - CONTROL ROOMS - OPERATOR CONTROLS
02/121895 DC : DRAFT APR 2002	BS EN 13060 - SMALL STEAM STERILIZERS
NF EN 61310-1 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
BS EN 61095 : 1993	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
ASTM F 1463 : 1993	SPECIFICATION FOR ALARM SIGNALS IN MEDICAL EQUIPMENT USED IN ANESTHESIA AND RESPIRATORY CARE
BS EN 50398-1 : 2017	ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - PART 1: GENERAL REQUIREMENTS
04/30117599 DC : DRAFT AUG 2004	IEC 61310-1 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
12/30261215 DC : 0	BS EN 13060 - SMALL STEAM STERILIZERS
INCITS/ISO/IEC 6329 : 1989	DUPLICATORS AND DOCUMENT COPYING MACHINES - SYMBOLS
BS ISO 8999 : 2001	RECIPROCATING INTERNAL COMBUSTION ENGINES - GRAPHICAL SYMBOLS
13/30276220 DC : 0	BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
PREN 15571 : DRAFT 2013	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS ISO 15519-1 : 2010	SPECIFICATION FOR DIAGRAMS FOR PROCESS INDUSTRY - PART 1: GENERAL RULES
16/30299847 DC : 0	BS EN 50398-1 - ALARM SYSTEMS - COMBINED AND INTEGRATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
BIS IS/IEC 60947-5-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - SECTION 1: ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
07/30135886 DC : 0	BS IEC 61227 - NUCLEAR POWER PLANTS - CONTROL ROOMS - OPERATOR CONTROLS
BS IEC 61892-3 : 2012	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
17/30341100 DC : 0	BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
DIN EN 15571:2015-03	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
99/124125 DC : DRAFT NOV 1999	BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS
I.S. EN 60519-4:2013	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS (IEC 60519-4:2013 (EQV))
03/306044 DC : DRAFT APR 2003	BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 16564 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
10/30237894 DC : DRAFT NOV 2010	BS EN 60519-4 - SAFETY IN ELECTRO HEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS
I.S. EN 61227:2016	NUCLEAR POWER PLANTS - CONTROL ROOMS - OPERATOR CONTROLS
IEEE C37.60 : 2012	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV
09/30175684 DC : 0	BS EN 14673:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
I.S. EN ISO 8230-1:2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
08/30190505 DC : 0	BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
15/30298059 DC : 0	BS EN 60947-5-5 ED 1.0/AMD 2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
I.S. EN 15503:2009	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
14/30297842 DC : 0	BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
BS EN 62310-1 : 2005	STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
BS EN 45510-2-7 : 2002	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
11/30252448 DC : 0	BS EN 1422 - STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
BS ISO 19029 : 2016	ACCESSIBLE DESIGN - AUDITORY GUIDING SIGNALS IN PUBLIC FACILITIES
DIN EN ISO 8230-1 E : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
04/30111859 DC : 0	IEC 62271-1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR - PART 1: COMMON SPECIFICATIONS
VDI/VDE 3518-2 : 2014	MULTIGAS SENSORS - FUNCTION, CLASSIFICATION AND ASSESSMENT
03/301332 DC : DRAFT JAN 2003	ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
15/30265353 DC : 0	BS EN 62271-1 ED 2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
I.S. EN 82079-1:2012	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012 (EQV))
BS PD IEC TR 61997 : 2001	GUIDELINES FOR THE USER INTERFACE IN MULTIMEDIA EQUIPMENT FOR GENERAL PURPOSE USE
BS EN 894-4 : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
ETR 297 : 20001	HUMAN FACTORS (HF)
BS ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
98/123927 DC : DRAFT AUG 1998	PREN 61010-2-045 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL ADN LABORATORY USE, PART 2-045: PARTICULAR REQUIREMENTS FOR WASHER-DISINFECTORS USED IN MEDICAL, PHARMACEUTICAL, VETERINARY AND LABORATORY FIELDS
VDI/VDE 3699-3 : 2014	PROCESS CONTROL USING DISPLAY SCREENS - MIMICS
94/712993 DC : DRAFT NOV 1994	PREN 45511 - GUIDE FOR PROCUREMENT - ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
CEI EN 60519-4 : 2014	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS
CEI EN 61310-3 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
NF EN 60947-5-1 : 2004 AMD 1 2009	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 82079-1 : 2012	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
BS EN 60598-2-22 : 2014	LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING (IEC 60598-2-22:2014)
11/30231451 DC : DRAFT SEP 2011	BS EN ISO 13856-1 - SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
DIN EN 16564:2015-04	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 60694 : 1997	COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
11/30249765 DC : 0	BS EN 60598-2-22 - LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING
IEC TS 62666 : 2.0	GUIDELINES FOR THE INCLUSION OF DOCUMENTATION ASPECTS IN PRODUCT STANDARDS
12/30257495 DC : 0	BS EN 61082-1 - PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
UNE EN 15571 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
UNI EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
DIN EN 894-4 E : 2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
VDI/VDE 3850-1 : 2014	DEVELOPMENT OF USABLE USER INTERFACES FOR TECHNICAL PLANTS - CONCEPTS, PRINCIPLES AND FUNDAMENTAL RECOMMENDATIONS
VDI/VDE 3699-1 : 2015	PROCESS CONTROL USING DISPLAY SCREENS - TERMINOLOGY
BS EN 62034 : 2012	AUTOMATIC TEST SYSTEMS FOR BATTERY POWERED EMERGENCY ESCAPE LIGHTING
VDI/VDE 3699-5 : 2014	PROCESS CONTROL USING DISPLAY SCREENS - ALARMS/MESSAGES
03/306593 DC : DRAFT APR 2003	BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
BS EN ISO 8230-1 : 2008	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
04/30117619 DC : DRAFT AUG 2004	IEC 61310-3 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
NF EN 62744 : 2015	REPRESENTATION OF STATES OF OBJECTS BY GRAPHIC SYMBOLS
10/30211242 DC : 0	BS EN 12601 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
PREN 14180 : DRAFT 2012	STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING
BS 7002(1992) : AMD 9831	SPECIFICATION FOR SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT, INCLUDING ELECTRICAL BUSINESS EQUIPMENT
03/103066 DC : DRAFT JAN 2003
NF EN 61010 2 045 : 2001	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-045: PARTICULAR REQUIREMENTS FOR WASHER DISINFECTORS USED IN MEDICAL, PHARMACEUTICAL, VETERINARY AND LABORATORY FIELDS
97/207801 DC : DRAFT JUL 1997	IEC 62026-5 - CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5: SMART DISTRIBUTED SYSTEM (SDS)
BS 4794-2.5&2.6(1978) : LATEST	SPEC FOR CONTROL SWITCHES INCL CONTACTOR RELAYS FOR CNTL AUXILIARY CIRCUITS VOLT 1000V A.C. 1200V D.C. IND LIGHTS STANDARDIZATION OF FIXING HOLE OF SINGLE HOLE MOUNTED PUSH BUTTONS INDICATOR LIGHTS
DIN EN 15503:2016-04	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
DIN EN 15571 E : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
12/30252545 DC : 0	BS ISO 15883-1:2006/AMD - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
15/30301932 DC : 0	BS ISO 19029 - ACCESSIBLE DESIGN - AUDITORY GUIDING SIGNALS IN PUBLIC FACILITIES
10/30214958 DC : 0	BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
ISO 12648 : 2006	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
15/30298363 DC : 0	BS EN 62271-111 ED 3.0 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV
CLC/TS 50136-4 : 2004	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 4: ANNUNCIATION EQUIPMENT USED IN ALARM RECEIVING CENTERS
DIN EN 894-4:2010-11	Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators
10/30182320 DC : 0	BS EN 1679-1:1998/A1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
BS IEC 61227 : 2008	NUCLEAR POWER PLANTS - CONTROL ROOMS - OPERATOR CONTROLS
BS EN 61310-1 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
UNE EN 16564 : 2015	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
07/30160845 DC : 0	BS EN 1332-3 - IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEY PADS
03/100500 DC : DRAFT JUNE 2003	IEC 60947-5-5 AMD 1. ED 1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
BS EN 61310-3 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
BS ISO 12648 : 2006	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
04/30110212 DC : DRAFT MAR 2004	ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
BS EN 15503 : 2009	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
01/200684 DC : DRAFT FEB 2001
BS 7618-1(1992) : 1992	ALARM SIGNALS FOR ANAESTHESIA AND RESPIRATORY CARE - SPECIFICATION FOR VISUAL ALARM SIGNALS
I.S. EN 50398-1:2017	ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - PART 1: GENERAL REQUIREMENTS
13/30276226 DC : 0	BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
BS EN 80416-3 : 2003	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
BS EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
BS ISO 12649 : 2004	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
BS EN 60950-23 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
07/30168572 DC : 0	BS IEC 61010-1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
PREN 50398-1 : DRAFT 2016	ALARM SYSTEMS - COMBINED AND INTEGRATED SYSTEMS - PART 1: GENERAL REQUIREMENTS
NBR IEC 60947-5-5 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
NBR IEC 60439-1 : 2003	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
BS 7712(1993) : 1993	SPECIFICATION FOR GRAPHICAL SYMBOLS FOR RECIPROCATING INTERNAL COMBUSTION ENGINES
UNE EN 50545-1 : 2012	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES
BIS IS 13252-23 : 2014	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
CSA ISO/IEC 8802-5 : 2002	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
CEI UNI EN 45510-2-7 : 2006	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
EN 60947-5-1 : 2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES (IEC 60947-5-1:2016 + COR1:2016)
CSA ISO 9241-8 : 2000:R2011	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
BS EN 61010-2-045 : 2001	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 2-45: PARTICULAR REQUIREMENTS FOR WASHER DISINFECTORS USED IN MEDICAL, PHARMACEUTICAL, VETERINARY AND LABORATORY FIELDS
16/30291994 DC : 0	BS EN ISO 19225 - UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
I.S. EN ISO 19225:2017	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017)
CSA ISO 9241-8 : 2000 : R2011	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
IEEE 802.5 : 1998	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
BS 7443(1991) : 1991	SPECIFICATION FOR SOUND SYSTEMS FOR EMERGENCY PURPOSES
02/207854 DC : DRAFT MAY 2002	IEC 60447 ED. 3.0 - BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
CEI CLC/TS 50398 : 2013	ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - GENERAL REQUIREMENTS
BS EN 181000 : 1995	HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - GENERIC SPECIFICATION: FIBRE OPTIC BRANCHING DEVICES
I.S. EN 62477-1:2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL
CEI EN 50131-1 : 2012	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
NBR IEC 60947-5-1 : 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
CEI EN 61310-1 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
NF EN 60947-5-5 : 1998 AMD 2 2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
CSA ISO 9241-8 : 2000 : R2016	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
CSA C22.2 No. 61010.1 :2012	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
09/30176666 DC : 0	BS EN 62079 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION
NF EN 60447 : 2004	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
UNE EN 60947-5-5 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
CEI EN 82079-1 : 2013	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
BS EN 61010-2-042 : 1997	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR AUTOCLAVES AND STERILIZERS USING TOXIC GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES
09/30201398 DC : 0	BS EN 62034 ED.2 - AUTOMATIC TEST SYSTEMS FOR BATTERY POWERED EMERGENCY ESCAPE LIGHTING
DIN EN 842 E : 2009	SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
BS EN 60947-1 : 2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
DIN EN 842:2009-01	SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
NF EN 61310-3 : 2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
I.S. EN 60947-5-1:2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
CSA ISO 9241-8 : 2000 : R2005	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
UNE EN 15503 : 2010	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
CEI EN 60945 : 2003	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
CSA ISO/IEC 8802-5 : 2002 : R2011	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
PREN 13060 : DRAFT 2012	SMALL STEAM STERILIZERS
CSA C22.2 No. 61010.2.045 : 2004	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-045: PARTICULAR REQUIREMENTS FOR WASHER DISINFECTORS USED IN MEDICAL, PHARMACEUTICAL, VETERINARY AND LABORATORY FIELDS
CSA ISO/IEC 8802-5 : 2002 : INC : AMD 1 : 2002 : R2011	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
NF EN 60950-23 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
UNI CEI EN 45510-2-7 : 2011	GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-7: ELECTRICAL EQUIPMENT - SWITCHGEAR AND CONTROLGEAR
NF EN 60309-4 : 2007 AMD 1 2012	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLET AND CONNECTOR, WITH OR WITHOUT INTERLOCK
DIN EN ISO 8230-1:2009-05	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
IEEE 1621 : 2004	USER INTERFACE ELEMENTS IN POWER CONTROL OF ELECTRONIC DEVICES EMPLOYED IN OFFICE/CONSUMER ENVIRONMENTS
16/30298078 DC : 0	BS EN 82079-1 ED 2.0 - PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
CSA ISO 9241-8 : 2000:R2016	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
EN 50131-1 : 2006 AMD 2 2017	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
CEI EN 62034 : 2013	AUTOMATIC TEST SYSTEMS FOR BATTERY POWERED EMERGENCY ESCAPE LIGHTING
VDI 3814-7 : 2012	BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - DESIGN OF USER INTERFACES
ISO 18758-2 : 1ED 2018	MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 : FR	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 61892-3 : 3.0	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
BS EN 61010-2-043 : 1998	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR DRY HEAT STERILIZERS USING EITHER HOT AIR OR HOT INERT GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES
I.S. EN 60947-5-5:1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
DD CLC/TS 50398 : 2009	ALARM SYSTEMS - COMBINED AND INTEGRATED SYSTEMS - GENERAL REQUIREMENTS
UNE EN 60204-1 : 2007	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 60447 : 2004	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
NF EN 50131-1 : 2007 AMD 2 2017	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
IEC 62642-3 : 1.0	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 3: CONTROL AND INDICATING EQUIPMENT
CSA C22.2 No. 60601.1 : 2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS EN 61010-1:2010+A1:2019	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
BS EN 60947-5-1:2017	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
PREN 15163 : DRAFT 2014	MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS
I.S. EN 60309-4:2007	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLETS AND CONNECTORS WITH OR WITHOUT INTERLOCK (IEC 60309-4:2006 (MOD))
IEC 62642-1 : 1.0	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
I.S. EN 60694:1999	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
S.R. HD 60364-5-51:2009	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
CEI EN 61095 : 2010	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 60947-1:2007	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. HD 60364-5-51:2009	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES (IEC 60364-5-51:2005 (MOD))
IEEE 807 : 2011	RECOMMENDED PRACTICE FOR UNIQUE IDENTIFICATION IN HYDROELECTRIC FACILITIES
I.S. EN 894-4:2010	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
S.R. CLC/TS 50398:2009	ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - GENERAL REQUIREMENTS
EN 13060 : 2014	SMALL STEAM STERILIZERS
BS EN 60947-5-5 : 1998	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICES WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997)
DIN VDE 0660-200 : 1992	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR; PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS; ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
BS EN 62271-1 : 2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
I.S. EN 62744:2015	REPRESENTATION OF STATES OF OBJECTS BY GRAPHICAL SYMBOLS
I.S. EN 62310-1:2005	STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
I.S. EN 13060:2014	SMALL STEAM STERILIZERS
EN 60204-1 : 2006 COR 2010	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
NBR IEC 60694 : 2006	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
I.S. EN 16564:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
NBR IEC 60947-1 : 2013	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
IEEE DRAFT 802.5 : 1995	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - LAN/MAN-TYPE SPECIFIC REQUIREMENTS - TOKEN RING ACCESS METHOD AND PHYSICAL LATER SPECIFICATION
EN 62271-1 : 2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR (IEC 62271-1:2017)
I.S. EN 15571:2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
BS EN 50545-1 : 2011	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES
I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
BS EN 60309-4 : 2007	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLETS AND CONNECTORS WITH OR WITHOUT INTERLOCK (IEC 60309-4:2006, MODIFIED)
EN 50398-1 : 2017	ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 61095:2009	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
I.S. EN 181000:1994	FIBRE OPTIC BRANCHING DEVICES (GENERIC SPECIFICATION)
I.S. EN ISO 13856-1:2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
NF EN 61095 : 2009	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
IEC 60364-5-51 : 5.0	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
I.S. EN 60598-2-22:2014	LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING
ISO 12649 : 2004	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
ISO 19029 : 2016	ACCESSIBLE DESIGN - AUDITORY GUIDING SIGNALS IN PUBLIC FACILITIES
ISO 19225 : 2017	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
CEI EN 62310-1 : 2006	STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
ISO/TR 22100-3 : 2016	SAFETY OF MACHINERY - RELATIONSHIP WITH ISO 12100 - PART 3: IMPLEMENTATION OF ERGONOMIC PRINCIPLES IN SAFETY STANDARDS
EN ISO 19225 : 2017	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS (ISO 19225:2017)
AAMI ST15883-1 : 2009	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
BIS IS/IEC 62271-1 : 2007	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS
I.S. HD 384.5.51:1998	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - CHAPTER 51: COMMON RULES
AAMI ST15883-1 : 2009 : INC : AMD 2 : 2012	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
PREN 12601 : DRAFT 2010	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
BS EN 62079 : 2001	PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
NF EN 61010-1 : 2011	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
UNE EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
I.S. EN 60945:2002	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
IEC 60947-5-1 : 4.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
NF EN 60947-1 : 2007 AMD 2 2015	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
I.S. EN 60950-1:2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD))
IEC 60950 : 3.0	SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT
IEC 60309-4 : 1.1	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLETS AND CONNECTORS WITH OR WITHOUT INTERLOCK
BS PD IEC TR 60601-4-3 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
CEI CLC/TS 50136-4 : 2004	ALARM SYSTEMS - ALARM TRANSMISSION SYSTEMS AND EQUIPMENT - PART 4: ANNUNCIATION EQUIPMENT USED IN ALARM RECEIVING CENTRES
PREN 50131-1 : DRAFT 2004	ALARM SYSTEMS - INTRUSION SYSTEMS - PART 1: SYSTEM REQUIREMENTS
ETR 143 : 20001	EQUIPMENT ENGINEERING (EE); CONNECTORS FOR TEST AND DISCONNECTION POINTS DISPLAY OF ALARMS
EN 61010-2-043 : 1997	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PARTICULAR REQUIREMENTS FOR DRY HEAT STERILIZERS USING EITHER HOT AIR OR HOT INERT GAS FOR THE TREATMENT OF MEDICAL MATERIALS, AND FOR LABORATORY PROCESSES
I.S. EN 50545-1:2011	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF TOXIC AND COMBUSTIBLE GASES IN CAR PARKS AND TUNNELS - PART 1: GENERAL PERFORMANCE REQUIREMENTS AND TEST METHODS FOR THE DETECTION AND MEASUREMENT OF CARBON MONOXIDE AND NITROGEN OXIDES
UNE-EN 82079-1:2015	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
UNE-EN 13060:2015	SMALL STEAM STERILIZERS
CSA C22.2 No. 61010.	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CLC/TS 50398 : 2009	ALARM SYSTEMS - COMBINED AND INTEGRATED ALARM SYSTEMS - GENERAL REQUIREMENTS
CSA C22.2 No. 61010.1 : 2012 (R2017)	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
NF EN 60950-1 : 2006 AMD 2 2014	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNI EN ISO 13856-1 : 2013	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
ISO/IEC 8802-5 : 1998	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
I.S. EN 61010-1:2010	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
13/30250344 DC : 0	BS EN 62744 - REPRESENTATION OF STATES OF OBJECTS BY GRAPHIC SYMBOLS
CSA ISO/IEC 8802-5 : 2002 : INC : UPD 1 : 2002 : R2011	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
I.S. EN ISO 8528-13:2016	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
BS IEC 61892-6 : 2013	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
CSA ISO/IEC 8802-5 : 2002	INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 5: TOKEN RING ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS
I.S. EN 60447:2004	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
I.S. EN 61439-1:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011)
CEI EN 60447 : 2005	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
ISO 15519-1 : 2010(R2015)	SPECIFICATION FOR DIAGRAMS FOR PROCESS INDUSTRY - PART 1: GENERAL RULES
IEC 61771 : 1.0	NUCLEAR POWER PLANTS - MAIN CONTROL-ROOM - VERIFICATION AND VALIDATION OF DESIGN
ISO 12643-1 : 2009(R2015)	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60204-33:2011	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
IEC 61892-6 : 2013	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
IEC 61082-1 REDLINE : 3ED 2014	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
I.S. EN 62271-1:2017	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
I.S. EN 80416-3:2002	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
I.S. EN 61310-1:2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
ISO 8999 : 2001(R2014)	RECIPROCATING INTERNAL COMBUSTION ENGINES - GRAPHICAL SYMBOLS
IEC 60950-1 : 2.2	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
I.S. EN 62034:2012	AUTOMATIC TEST SYSTEMS FOR BATTERY POWERED EMERGENCY ESCAPE LIGHTING (IEC 62034:2012 (EQV))
I.S. EN 60439-1:2000	LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES
I.S. EN 61010-1:2010&A1:2019	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
IEC 60947-5-1 REDLINE : 4ED 2016	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
I.S. EN 60204-1:2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 62271-111 : 2.0	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV
I.S. EN 60204-32:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC 62271-1 : 2.0	HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: COMMON SPECIFICATIONS FOR ALTERNATING CURRENT SWITCHGEAR AND CONTROLGEAR
IEC 60204-1 : 6.0:2016	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
ISO TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
IEC 60204-1 REDLINE : 6ED 2016	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
I.S. EN 61310-3:2008	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
EN 61010-1 : 2010	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS (IEC 61010-1:2010)
IEC TR 60601-4-3 : 1ED 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
AAMI ES60601-1 : 2005	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
I.S. EN 50131-1:2006	ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 1: SYSTEM REQUIREMENTS
AAMI ES60601-1 : 2005	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
IEC 60204-33 : 1.0	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
AAMI ES60601-1 : 2005 : R2012	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
EN 62477-1 : 2012 AMD 1 2017	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016)
EN 60601-1:2006/A1	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005)
UNE-EN ISO 15883-1:2009	Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 15883-1:2006)
UNE-EN 1915-1:2013	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
DIN EN 1760-1 E : 1997	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
DIN EN 1679-1:2011-09	Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines; German version EN 1679-1:1998+A1:2011
DIN EN 13060:2015-03	SMALL STEAM STERILIZERS
DIN EN ISO 8655-1 E : 2002	PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
DIN EN 13861 E : 2012	SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
DIN EN 1915-1 E : 2001	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
DIN EN 1552:2003-09	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
DIN EN 1422:2014-08	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 1332-3 E : 2008	IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEYPADS
DIN EN ISO 15883-1:2014-10	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014)
DIN EN 1760-1:2009-08	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
DIN EN 981:2009-01	SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
DIN EN 1679-1 E : 2011	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
DIN EN 14673 E : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 14656 E : 2010	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 13861:2012-01	SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
DIN EN 14673:2010-10	Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 1422 E : 1997	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 13060 E : 2015	SMALL STEAM STERILIZERS
DIN EN ISO 8528-13 E : 2017	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
DIN EN ISO 8528-13 : 2014	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
DIN EN 14656:2010-10	Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
(INACTIVE RECORD) DIN EN 1332-3:2008-11	IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEYPADS
05/30136705 DC : DRAFT JUL 2005	IEC 60309-4 - PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 4: SWITCHED SOCKET-OUTLET AND CONNECTOR, WITH OR WITHOUT INTERLOCK
UNE EN 61439-1 : 2012	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 1422 : 2014	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
BS PD ISO/TR 18569 : 2004	SAFETY OF MACHINERY - GUIDELINES FOR THE UNDERSTANDING AND USE OF SAFETY OF MACHINERY STANDARDS
02/203840 DC : DRAFT MAY 2002	IEC 60204-1/ED.5.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 60204-32 : 2.0:2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
IEC 82079-1 : 1.0	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS
BS EN 14656 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
BS PD IEC TS 62850 : 2013	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN EDUCATIONAL ESTABLISHMENTS BY CHILDREN
ISO 8230-1 : 2008(R2016)	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
UNE-EN ISO 8528-13:2017	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
14/30297343 DC : 0	BS EN ISO 8528-13 - RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY
BS EN 60601-1 : 2006	MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNE-EN 15503:2010	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
IEC 60950-23 : 1.0	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
I.S.EN ISO 8528-13:2016&LC:2016	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
12/30261012 DC : 0	BS IEC 61892-6 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
IEC 61310-1 : 2.0	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
04/30123347 DC : DRAFT OCT 2004	IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
EN 60598-2-22 : 2014 COR 2016	LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING (IEC 60598-2-22:2014/COR2:2016)
BS EN 14673 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
06/30154990 DC : 0	BS EN 60204-32 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
BS EN 12601 : 2010	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
BS EN 60950 : 2000	SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT
IEC 60439-1 : 4.1	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
BS EN 1679-1 : 1998	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
IEC 60694 : 2.2	COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS
BS EN 62477-1 : 2012	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012)
BS EN 981 : 1997	SAFETY OF MACHINERY - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
BS 5486-1(1990) : 1990	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - REQUIREMENTS FOR TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
BS EN 13861 : 2011	SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
IEC 62310-1 : 1.0	STATIC TRANSFER SYSTEMS (STS) - PART 1: GENERAL AND SAFETY REQUIREMENTS
IEC 61010-1 : 3.1:2017	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
BS EN 60204-1 : 2006	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
BS EN 1915-1 : 2013	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
BS EN 60204-32 : 2008	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
BS EN 61439-1 : 2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 1552 : 2003	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
IEC 60601-1:2005+AMD1:2012 CSV	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
IEC TS 62850 : 1ED 2013	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - GENERAL REQUIREMENTS FOR EQUIPMENT INTENDED TO BE USED IN EDUCATIONAL ESTABLISHMENTS BY CHILDREN
BS EN 1332-3 : 2008	IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEYPADS
IEC 62034 : 2.0	AUTOMATIC TEST SYSTEMS FOR BATTERY POWERED EMERGENCY ESCAPE LIGHTING
IEC 61439-1 : 2.0:2011	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
IEC 62477-1 : 1.1	SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL
98/705686 DC : DRAFT MAR 1998	PREN 13135-1 - CRANES - SAFETY - DESIGN - REQUIREMENTS FOR EQUIPMENT - PART 1: ELECTROTECHNICAL EQUIPMENT
BS EN ISO 8655-1 : 2002	PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
14/30238347 DC : 0	BS EN 60204-1 ED 6.0 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
08/30195018 DC : DRAFT DEC 2008	BS EN 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
BS EN 842 : 1996	SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
IEC 60598-2-22 : 4.1	LUMINAIRES - PART 2-22: PARTICULAR REQUIREMENTS - LUMINAIRES FOR EMERGENCY LIGHTING
IEC 61310-3 : 2.0	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS
IEC 61010-2-045 : 1.0	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-045: PARTICULAR REQUIREMENTS FOR WASHER DISINFECTORS USED IN MEDICAL, PHARMACEUTICAL, VETERINARY AND LABORATORY FIELDS
IEC 61227 : 2.0	NUCLEAR POWER PLANTS - CONTROL ROOMS - OPERATOR CONTROLS
BS EN ISO 8528-13 : 2016	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016)
IEC 60447 : 3.0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
ISO 8655-1 : 2002(R2013)	PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
BS EN 13060 : 2014	SMALL STEAM STERILIZERS
IEC 80416-3 : 1.1	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
09/30204029 DC : 0	BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
UNE EN 61010-1 : 2011	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
17/30345652 DC : 0	BS IEC 62040-5-1 ED 1.0 - UNINTERRUPTIBLE POWER SYSTEMS (UPS) - PART 5-1: DC OUTPUT UPS - SAFETY REQUIREMENTS
UNE HD 60364-5-51 : 2010	ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
ISO 13856-1 : 2013(R2018)	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS
IEC 60601-1 1988 : 1988 COR 1 1995	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR SAFETY
IEC 61082-1 : 3.0EN+(REDLINE+VERSION)	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
BS EN 61082-1 : 2015	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
IEC 62079 : 1.0	PREPARATION OF INSTRUCTIONS - STRUCTURING, CONTENT AND PRESENTATION
IEC 60945 : 4.0	MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - GENERAL REQUIREMENTS - METHODS OF TESTING AND REQUIRED TEST RESULTS
IEC 60519-4 : 4.0	SAFETY IN ELECTROHEATING INSTALLATIONS - PART 4: PARTICULAR REQUIREMENTS FOR ARC FURNACE INSTALLATIONS
BS EN 60950-1 : 2006	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
IEC 60947-1 : 5.2	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
ISO 9241-8 : 1997	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
BS EN ISO 9241-8 : 1998	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - REQUIREMENTS FOR DISPLAYED COLOURS
IEC 61095 : 2.0	ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
BS EN 60439-1 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
UNE EN 60601-1 : 2008	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
UNE EN 80416-3 : 2003	BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 3: GUIDELINES FOR THE APPLICATION OF GRAPHICAL SYMBOLS
IEC 61439-1 : 2020	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
BS EN 60204-33 : 2011	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
10/30230568 DC : 0	BS EN 61892-3 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
DIN EN 1552 E : 2003	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
IEC 62744 : 1ED 2014	REPRESENTATION OF STATES OF OBJECTS BY GRAPHICAL SYMBOLS
BS EN ISO 15883-1 : 2009	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006)
16/30301661 DC : 0	BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES
EN 82079-1 : 2012	PREPARATION OF INSTRUCTIONS FOR USE - STRUCTURING, CONTENT AND PRESENTATION - PART 1: GENERAL PRINCIPLES AND DETAILED REQUIREMENTS (IEC 82079-1:2012)
BS EN 1760-1 : 1998	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
07/30153021 DC : 0	BS IEC 60204-33 - SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 33: REQUIREMENTS FOR SEMICONDUCTOR FABRICATION EQUIPMENT
ISO 15883-1 : 2006(R2009)	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
04/30106146 DC : DRAFT MARCH 2004	BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
ISO 8528-13 : 2016	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY
CSA C22.2 No. 60950-1 : 2007	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN ISO 8528-13:2016	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
UNE-EN 61010-1:2011	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
EN 1332-3 : 2008	IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEYPADS
CSA C22.2 No. 60950-1 : 2007	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE EN 60601-1 : 2008	MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
ISA 61010-1 : 2008	SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60950-1:2007	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 MODIFIED)
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1:2007 : INC : AMD 1 : 2011 : R2012	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : R2012	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1:2007 : INC : AMD 2 : 2014 : R2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
UNE-EN 60204-1:2007	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA ISO 9241-8 : 2000	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
UL 60950-23 : 1	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 23: LARGE DATA STORAGE EQUIPMENT
CSA C22.2 No. 60950-1:2007 : INC : AMD 2 : 2014 : R201200	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016	INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
EN ISO 8528-13 : 2016 COR 2016	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO 8528-13:2016, CORRECTED VERSION 2016-10-15)
UNE EN 60947-5-5 : 1999	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION
I.S. EN ISO 15883-1:2009	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006)
UNI EN 1332-3 : 2009	IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEYPADS
I.S. EN 1332-3:2008	IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEYPADS
DIN EN 1915-1:2001-06	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
I.S. EN 14656:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
I.S. EN 1679-1:1998	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
I.S. EN 61082-1:2015	PREPARATION OF DOCUMENTS USED IN ELECTROTECHNOLOGY - PART 1: RULES
(INACTIVE RECORD) DIN EN ISO 8655-1:2002-12	PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
EN 60947-5-5 : 1997 AMD 2 2016	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-5: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTRICAL EMERGENCY STOP DEVICE WITH MECHANICAL LATCHING FUNCTION (IEC 60947-5-5:1997/A2:2016)
(INACTIVE RECORD) DIN EN ISO 9241-8:1998-04	ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 8: REQUIREMENTS FOR DISPLAYED COLOURS
I.S. EN 842:1997	SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING
I.S. EN 13861:2011	SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
EN 16564 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
I.S. EN 1915-1:2013	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS
(INACTIVE RECORD) DIN EN 13060:2015-03	SMALL STEAM STERILIZERS
DIN EN ISO 15883-1 E : 2014	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014)
(INACTIVE RECORD) DIN EN 12601:2011-07	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
DIN EN 1760-1:1997-09	SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS
EN 60947-1 : 2007 AMD 2 2014	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014)
(INACTIVE RECORD) DIN EN 1679-1:2011-09	RECIPROCATING INTERNAL COMBUSTION ENGINES - SAFETY - PART 1: COMPRESSION IGNITION ENGINES
(INACTIVE RECORD) DIN EN ISO 15883-1:2014-10	WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS (ISO 15883-1:2006 + AMD 1:2014)
EN 15571 : 2014	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
(INACTIVE RECORD) DIN EN ISO 8230-1:2009-05	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
I.S. EN 1422:2014	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
I.S. EN 14673:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
DIN EN 1422:1997-11	STERILIZERS FOR MEDICAL PURPOSES - ETHYLENE OXIDE STERILIZERS - REQUIREMENTS AND TEST METHODS
DIN EN 12601:2011-07	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN GENERATING SETS - SAFETY
(INACTIVE RECORD) DIN EN 1552:2003-09	UNDERGROUND MINING MACHINES - MOBILE EXTRACTING MACHINES AT THE FACE - SAFETY REQUIREMENTS FOR SHEARER LOADERS AND PLOUGH SYSTEMS
(INACTIVE RECORD) DIN EN 894-4:2010-11	SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS
DIN EN 1332-3:2008-11	IDENTIFICATION CARD SYSTEMS - MAN-MACHINE INTERFACE - PART 3: KEYPADS
DIN VDE 0805 : 1990 AMD 1 1991	SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT INCLUDING ELECTRICAL BUSINESS EQUIPMENT
(INACTIVE RECORD) DIN EN 15503:2016-04	GARDEN EQUIPMENT - GARDEN BLOWERS, VACUUMS AND BLOWER/VACUUMS - SAFETY
DIN VDE 0660-500 : 1991	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - REQUIREMENTS FOR TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
(INACTIVE RECORD) DIN EN 14656:2010-10	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
(INACTIVE RECORD) DIN EN 16564:2015-04	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS
(INACTIVE RECORD) DIN EN 14673:2010-10	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
(INACTIVE RECORD) DIN EN 15571:2015-03	MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES
(INACTIVE RECORD) DIN EN 13861:2012-01	SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY
(INACTIVE RECORD) DIN EN ISO 13856-1:2013-08	SAFETY OF MACHINERY - PRESSURE-SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR DESIGN AND TESTING OF PRESSURE-SENSITIVE MATS AND PRESSURE-SENSITIVE FLOORS (ISO 13856-1:2013)
(INACTIVE RECORD) DIN EN 842:2009-01	SAFETY OF MACHINERY - VISUAL DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60050-721 : 1.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - TELEGRAPHY, FACSIMILE AND DATA COMMUNICATION
IEC 60050-441 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - CHAPTER 441: SWITCHGEAR, CONTROLGEAR AND FUSES
IEC 60204-1 : 6.0:2016	SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
IEC 60050-845 : 1.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - LIGHTING
ISO/IEC GUIDE 51 : 2014	SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
IEC 60447 : 3.0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
ISO 11429 : 1996(R2014)	ERGONOMICS - SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS
IEC GUIDE 104 : 4.0	THE PREPARATION OF SAFETY PUBLICATIONS AND THE USE OF BASIC SAFETY PUBLICATIONS AND GROUP SAFETY PUBLICATIONS
IEC 61310-1 : 2.0	SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 1: REQUIREMENTS FOR VISUAL, ACOUSTIC AND TACTILE SIGNALS
ISO 8201 : 1987	ACOUSTICS - AUDIBLE AND OTHER EMERGENCY EVACUATION SIGNALS
AS 60598.2.22:2019	Luminaires Particular requirements - Luminaires for emergency lighting (IEC 60598-2-22:2017 (ED.4.1) MOD)
ISO 7000 : 2014	GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - REGISTERED SYMBOLS
ISO 3864 : 1984	SAFETY COLOUR AND SAFETY SIGNS

Add To Cart

Product Format

Quantity

add to cart

IEC 60073 : 6.0

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?