IEC 60079-11 : 6.0

Current

Current The latest, up-to-date edition.

Add to Watchlist What is StandardsWatch?

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You have already added this standard to your Watchlist.
Visit My Watchlist to view the full list.

EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'

Publisher: International Electrotechnical Committee

Published: 06-30-2011

Available Formats: PDF - English - French, Hardcopy - English - French
More Info on product formats

Table of Contents - (Show below) - (Hide below)

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Grouping and classification of intrinsically safe
   apparatus and associated apparatus
5 Levels of protection and ignition compliance
   requirements of electrical apparatus
6 Apparatus construction
7 Components on which intrinsic safety depends
8 Infallible components, infallible assemblies of
   components and infallible connections on which
   intrinsic safety depends
9 Supplementary requirements for specific apparatus
10 Type verifications and type tests
11 Routine verifications and tests
12 Marking
13 Documentation
Annex A (normative) - Assessment of intrinsically safe
                      circuits
Annex B (normative) - Spark test apparatus for intrinsically
                      safe circuits
Annex C (informative) - Measurement of creepage distances,
                        clearances and separation distances
                        through casting compound and through
                        solid insulation
Annex D (normative) - Encapsulation
Annex E (informative) - Transient energy test
Annex F (normative) - Alternative separation distances for
                      assembled printed circuit boards and
                      separation of components
Annex G (normative) - Fieldbus intrinsically safe concept
                      (FISCO) - Apparatus requirements
Annex H (informative) - Ignition testing of semiconductor
                        limiting power supply circuits
Bibliography

Abstract - (Show below) - (Hide below)

This part of IEC 60079 specifies the construction and testing of intrinsically safe apparatus intended for use in an explosive atmosphere and for associated apparatus, which is intended for connection to intrinsically safe circuits which enter such atmospheres.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Electrotechnical Committee
ProductNote	NEW CHILD ISH 6 2019 IS NOW ADDED
Pages
ISBN
Committee	TC 31
Supersedes	IEC 61241-11 : 1.0 IEC 60079-3 : 3ED 90 IEC 60079-27 : 2.0 IEC 60079-11 : 5.0

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
BS EN 60079-11 : 2012	Identical
NEN EN IEC 60079-11 : 2012	Identical
CEI EN 60079-11 : 2012	Identical
NBN EN 60079-11 : 2012	Identical
DS EN 60079-11 : 2012	Identical
SANS 60079-11 : 4ED 2012	Identical
GOST R IEC 60079-11 : 2010	Identical
PN EN 60079-11 : 2012	Identical
VDE 0170-7 : 2012	Identical
I.S. EN 60079-11:2012	Identical
NBR IEC 60079-11 : 2013 ERRATA 1 2017	Identical
EN 60079-11 : 2012	Identical
DIN EN 60079-11 : 2012	Identical
UNE EN 60079-11 : 2013	Identical
PN EN 60079-11 : 2012	Identical
NBN EN 60079-11 : 2012	Identical
DS EN 60079-11 : 2012	Identical
NF EN 60079-11 : 2012	Identical
DIN EN 60079-11 : 2012	Identical
BS 5501-7(1977) : 1977	Similar to
GOST R IEC 60079-11 : 2010	Identical
BS EN 60079-11 : 2012	Identical
NEN EN IEC 60079-11 : 2012	Identical
SANS 60079-11 : 4ED 2012	Identical
SN EN 60079-11 : 2007	Identical
CSA E60079.11 : 2002	Similar to
CSA E60079.11 : 2002	Similar to
UNE EN 60079-11 : 2013	Identical
CSA E60079.11 : 2002 : R2011	Similar to

Standards Referenced By This Book - (Show below) - (Hide below)

09/30198404 DC : DRAFT JAN 2009	BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELD BUS PROFILES
GOST R 52350.27 : 2005	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
I.S. EN 60079-19:2011	EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
OVE/ONORM EN 60079-18 : 2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014)
VDI/VDE 3518-1 : 2011	MULTIGAS SENSORS - TERMS, CONFIGURATION, FUNCTION AND CLASSIFICATION
UNI EN 14116 : 2014	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
UNE-EN 60079-17:2014	EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
14/30265073 DC : 0	BS EN ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 60079-35-1:2011	EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
CCS GUIDELINE E-20 : DEC 2017	COMPARTMENT FLOODING WATER LEVEL DETECTORS (INCLUDING SENSORS)
UNE EN ISO 8846 : 2017	SMALL CRAFT - ELECTRICAL DEVICES - PROTECTION AGAINST IGNITION OF SURROUNDING FLAMMABLE GASES (ISO 8846:1990)
BS EN ISO 80601-2-13 : 2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
DIN EN 12405-3 : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
DIN EN 1474-1 E : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
15/30320611 DC : 0	BS EN 60445 - BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
BS IEC 60079-19 : 1993	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN MINES OR EXPLOSIVES)
DIN EN 1474-1 : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
UNE-EN 60079-1:2015	Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60445 REDLINE : 6ED 2017	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
BS 5345-4(1977) : 1977	CODE OF PRACTICE FOR SELECTION INSTALLATION AND MAINTENANCE OF ELECTRICAL APPARATUS FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - INSTALLATION AND MAINTENANCE REQUIREMENTS FOR ELECTRICAL APPARATUS WITH TYPE OF PROTECTION 'I' INTRINSICALLY SAFE ELECTRICAL APPARATUS AND SYSTEMS
CSA C22.4 PACKAGE : 2009	CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
BS EN 60079-7 : 2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
15/30332072 DC : 0	BS EN 62952-3 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 3: ENERGY HARVESTING SPECIFICATION
DIN EN ISO 15970 E : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
13/30289289 DC : 0	BS EN 12405-3 - GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
10/30189547 DC : 0	BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
BS EN 16299 : 2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
BS EN 60079-26 : 2015	EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
BS EN 61241-1 : 2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
SAE AS 5116 : 2003	MINIMUM OPERATIONAL PERFORMANCE SPECIFICATION FOR GROUND ICE DETECTION SYSTEMS
DIN EN 15714-2 E : 2010	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
BS EN 60079-5 : 2015	EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
UNE-EN 60079-15:2013	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
11/30239992 DC : 0	BS EN 14116 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR THE PRODUCT RECOGNITION DEVICE
NF EN 62952-1 : 2017	POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
I.S. EN 60079-25:2010	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010 (EQV))
BS EN ISO 8835-3 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
BS 6182-1(1994) : 1994	INTRINISCALLY SAFE POWER SUPPLIES FOR USE IN COAL MINES - SPECIFICATION FOR D.C. POWER SUPPLIES
07/30168628 DC : 0	BS EN 60079-15 - EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
PREN 14236 : DRAFT 2017	ULTRASONIC DOMESTIC GAS METERS
00/241099 DC : DRAFT MAR 2000	IEC 60079-17 EDITION 3 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
10/30214970 DC : 0	BS EN 13616 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID PETROLEUM FUELS
PREN 12941 : DRAFT 2016	RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING
BS EN ISO 16923 : 2018	NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
PREN 1473 : DRAFT 2018	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
ISO 12643-1 : 2009(R2015)	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
DIN EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
PREN 13617-1 : DRAFT 2010	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN ISO 8846 : 2017	SMALL CRAFT - ELECTRICAL DEVICES - PROTECTION AGAINST IGNITION OF SURROUNDING FLAMMABLE GASES (ISO 8846:1990)
PREN 12405-1 : DRAFT 2017	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
03/300201 DC : DRAFT FEB 2003	IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
BS EN 16657 : 2016	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
UNE EN 15208 : 2014	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
UNE EN 60079-28 : 2016	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
BS EN ISO 16904 : 2016	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS
BS EN 60079-25 : 2010	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
BS PD IEC TR 61831 : 2011	ON-LINE ANALYSER SYSTEMS - GUIDE TO DESIGN AND INSTALLATION
02/205209 DC : DRAFT JULY 2002	IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD'
BS EN 12405-3 : 2015	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
12/30264885 DC : 0	BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
BS IEC 62401 : 2017	RADIATION PROTECTION INSTRUMENTATION - ALARMING PERSONAL RADIATION DEVICES (PRDS) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
BS IEC 61832 : 1999	ANALYSER SYSTEMS - GUIDE TO TECHNICAL ENQUIRY AND BID EVALUATION
15/30330032 DC : 0	BS ISO/IEC 80079-20-1 - EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
SR CLC/TR 60079-33:2015	EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
NBR IEC 62013-1 : 2009	CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
EN 60079-29-1 : 2016	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES (IEC 60079-29-1:2016, MODIFIED)
BS 4727-2:GRP13(1991) : 1991	GLOSSARY OF ELECTROTECHNICAL, POWER, TELECOMMUNICATION, ELECTRONICS, LIGHTING AND COLOUR TERMS - TERMS PARTICULAR TO POWER ENGINEERING - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES
CEN/TR 16787 : 2014	INDUSTRIAL GAS INSTALLATION - GUIDELINE
UNI EN 1474-1 : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
I.S. EN 13616-2:2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
05/30128036 DC : DRAFT JAN 2005	IEC 60079-5 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 5: POWDER FILLING 'Q'
03/313421 DC : DRAFT NOV 2003	IEC 60079-28 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 28: RISK OF IGNITION BY RADIATION OF EXPLOSIVE ATMOSPHERES OF GAS, VAPOUR OR MIST FROM OPTICAL RADIATION EQUIPMENT AND TRANSMISSION SYSTEMS
CLC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS (IEC/TS 62603-1:2014)
I.S. EN 60079-20-1:2010	EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
BS EN ISO 12100 : 2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
BS IEC 61831 : 1999	ON-LINE ANALYSER SYSTEMS - GUIDE TO DESIGN AND INSTALLATION
I.S. EN 16299:2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
I.S. EN 60079-2:2014	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
BS EN 60445 : 2017	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS (IEC 60445:2017 + COR1:2017)
08/30190505 DC : 0	BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BIS IS/IEC 60079-1 : 2007	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
00/243930 DC : DRAFT AUG 2000	IEC 60079-18. ED. 2. ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 18: ENCAPSULATION 'M'
PREN 14492-1 : DRAFT 2015	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN ISO 15970 : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
NFPA 497 : 2017	CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
BS ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 60079-17 : 2014	EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
CSA E79.18 : 1995	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ENCAPSULATION "M"
03/302193 DC : DRAFT FEB 2003
03/301332 DC : DRAFT JAN 2003	ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
UNI EN 15714-2 : 2009	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
08/30175783 DC : DRAFT JAN 2008	BS EN 60079-20-1 - EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS - GAS AND VAPOUR CLASSIFICATION, TEST METHODS AND DATA
13/30286135 DC : 0	BS EN 13616-1 - OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - REQUIREMENTS AND TEST/ASSESSMENT METHODS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
BS EN 61241-11 : 2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 11: PROTECTION BY INTRINSIC SAFETY "ID"
BS EN 60079-10-2 : 2015	EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
10/30219405 DC : 0	BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
14/30278882 DC : 0	BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
10/30212177 DC : 0	BS EN 12405-1:2005/A2 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
14/30311363 DC : 0	PD IEC/TS 60079-39 ED1.0 - EXPLOSIVE ATMOSPHERES - PART 39: INTRINSICALLY SAFE SYSTEMS WITH ELECTRONICALLY CONTROLLED SPARK DURATION LIMITATION
08/30180312 DC : DRAFT MAR 2008	BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
DIN EN ISO 8835-3 E : 2011	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
BS PD CLC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
03/313426 DC : DRAFT NOV 2003	IEC 62013-1 - CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
07/30174313 DC : 0	BS EN 60445 - BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
BS EN 60079-27 : 2008	EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
16/30309524 DC : 0	BS IEC 62401 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - ALARMING PERSONAL RADIATION DEVICES (PRD) FOR DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
GOST R 52350.1 : 2005	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES "D"
09/30198043 DC : 0	BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN ISO 12100 E : 2011	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
13/30267536 DC : 0	BS EN 60079-29-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
SR CLC/TS 62603-1:2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
BS EN 61241-0 : 2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
EN 14116 : 2012 + A1 2014	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
CEI EN 62952-1 : 1ED 2017	POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
NBR IEC 61241-0 : 2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
BS ISO 14839-4 : 2012	MECHANICAL VIBRATION - VIBRATION OF ROTATING MACHINERY EQUIPPED WITH ACTIVE MAGNETIC BEARINGS - PART 4: TECHNICAL GUIDELINES
02/204778 DC : DRAFT JULY 2002	IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
BS ISO 4512 : 2000	PETROLEUM AND LIQUID PETROLEUM PRODUCTS - EQUIPMENT FOR MEASUREMENT OF LIQUID LEVELS IN STORAGE TANKS - MANUAL METHODS
12/30268608 DC : 0	BS EN 60079-17/ED 5 - EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
DIN EN ISO 8835-3 : 2011	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
UNE-EN 60079-26:2015	EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
12/30243465 DC : 0	BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
I.S. EN 60079-0:2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
DIN EN 61784-1 : 2015	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES (IEC 61784-1:2014)
12/30267444 DC : 0	BS EN 60079-5 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
I.S. EN ISO 8846:2017	SMALL CRAFT - ELECTRICAL DEVICES - PROTECTION AGAINST IGNITION OF SURROUNDING FLAMMABLE GASES (ISO 8846:1990)
13/30267260 DC : 0	BS EN 62708 ED 1.0 - DOCUMENT KINDS FOR ELECTRICAL AND INSTRUMENTATION PROJECTS IN THE PROCESS INDUSTRY
08/30191166 DC : DRAFT OCT 2008	BS EN 60079-25 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE SYSTEMS
08/30186575 DC : DRAFT JULY 2008	BS EN 60079-15 ED. 4 - EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
CEI EN 60079-27 : 2010	EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
06/30149825 DC : DRAFT MAY 2006	EN 60079-25 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE SYSTEMS
ISO 12648 : 2006	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
BS EN 60446 : 2007	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
UNE EN 16657 : 2016	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
ISO 16923 : 2016	NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
BS PD IEC TS 60079-39 : 2015	EXPLOSIVE ATMOSPHERES - PART 39: INTRINSICALLY SAFE SYSTEMS WITH ELECTRONICALLY CONTROLLED SPARK DURATION LIMITATION
BS ISO 16923 : 2016	NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
09/30201664 DC : 0	BS EN ISO 12100 - SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN, RISK ASSESSMENT AND RISK REDUCTION
BS EN 1474-1 : 2008	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
UNE EN ISO 15970 : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
CEI EN 60079-17 : 2015	EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
09/30209043 DC : 0	BS EN 13922 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
IEC TS 60079-27 : 1ED 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
13/30248785 DC : 0	BS EN 61800-2 - ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 2: GENERAL REQUIREMENTS - RATING SPECIFICATIONS FOR LOW VOLTAGE ADJUSTABLE FREQUENCY A.C. POWER DRIVE SYSTEMS
05/30128234 DC : DRAFT FEB 2005	EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
BS EN 15714-2 : 2009	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
04/30099567 DC : DRAFT SEP 2004	ISO 18132 - REFRIGERATED LIGHT HYDROCARBON FLUIDS - MEASUREMENT OF LIQUID LEVELS ON BOARD SHIPS CARRYING LIQUEFIED GASES - GENERAL GUIDANCE
DIN EN ISO 15970 : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
BS 7489(1991) : 1991	SPECIFICATION FOR PROTECTION OF ELECTRICAL DEVICES USED ON SMALL CRAFT TO PREVENT IGNITION OF SURROUNDING FLAMMABLE GASES
BS EN 62708 : 2015	DOCUMENT KINDS FOR ELECTRICAL AND INSTRUMENTATION PROJECTS IN THE PROCESS INDUSTRY
I.S. EN 16657:2016	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
05/30128501 DC : DRAFT JAN 2005	IEC 60079-6 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION 'O'
I.S. EN 50628:2016	ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
CSA E60079.6 : 2002 : R2011	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
BIS IS/ISO 12643-1 : 2009	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
17/30356728 DC : 0	BS EN 12261 - GAS METERS - TURBINE GAS METERS
UNE EN 13616-2 : 2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
IEC 60309-3 : 1ED 94	PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PARTICULAR REQUIREMENTS FOR PLUGS, SOCKET-OUTLETS, CONNECTORS AND APPLIANCE INLETS FOR USE IN EXPLOSIVE GAS ATMOSPHERES
ISO 14839-4:2012(R2017)	MECHANICAL VIBRATION - VIBRATION OF ROTATING MACHINERY EQUIPPED WITH ACTIVE MAGNETIC BEARINGS - PART 4: TECHNICAL GUIDELINES
CEI EN 60947-5-6 : 2000	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
13/30278077 DC : 0	BS EN ISO 16904 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS
BS EN 60947-5-6 : 2001	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
12/30261228 DC : 0	BS EN 15208 - TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
BS EN 60079-20-1 : 2010	EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
DIN EN 12405-3 E : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
BS PD IEC/TS 62603-1 : 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
UNI EN ISO 8835-3 : 2010	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
BS EN 62952-1 : 2016	POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
17/30347443 DC : DRAFT JUN 2017	BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
04/30113660 DC : DRAFT MAY 2004	IEC 60079-7 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 7: INCREASED SAFETY 'E'
08/30174143 DC : DRAFT SEP 2008	BS EN 12312-5 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 12405-1 E : 2011	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
04/30123544 DC : DRAFT OCT 2004	IEC 60079-1 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 1: FLAMEPROOF ENCLOSURES 'D'
UNE EN ISO 16904 : 2016	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016)
04/30112677 DC : 0	IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
UNE EN 60079-5 : 2016	EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
BS PD CEN/TR 16787 : 2014	INDUSTRIAL GAS INSTALLATION - GUIDELINE
17/30345890 DC : 0	BS ISO 23550 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - GENERAL REQUIREMENTS
BS ISO 12648 : 2006	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
I.S. EN 14116:2012	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
BS EN 50223 : 2015	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
BS IEC 60092-502 : 1999	ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
04/30110212 DC : DRAFT MAR 2004	ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
06/30160085 DC : 0	BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
12/30270980 DC : 0	BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
12/30260078 DC : 0	BS EN 60092-502 IEC 60092-502 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
BS EN 60601-2-13 : 2006	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
04/30113665 DC : DRAFT MAY 2004	IEC 60079-19 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 19: REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN EXPLOSIVES)
BS EN 50270 : 2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
ANSI/ISO 12100 : 2012	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
08/30186475 DC : 0	BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
17/30363244 DC : 0	BS EN 60079-25 ED.3.0 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
11/30247086 DC : 0	BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
14/30297213 DC : 0	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
BS ISO 12649 : 2004	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
CSA E60079.7 : 2003	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 7: INCREASED SAFETY "E"
BS PD IEC TS 60079-43 : 2017	EXPLOSIVE ATMOSPHERES - PART 43: EQUIPMENT IN ADVERSE SERVICE CONDITIONS
BS EN 60079-28 : 2015	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
DIN EN ISO 12100 : 2011-03	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
BS EN 13616-1 : 2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
09/30194936 DC : DRAFT JAN 2009	BS EN ISO 28460 - PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS
09/30182347 DC : 0	BS EN 12621:2006/A1 - MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
NF EN 60947-5-6 : 2000	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
I.S. EN 60079-14:2014	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
04/30099768 DC : DRAFT DEC 2004	PREN ISO 8835-3 - INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: ANAESTHETIC GAS SCAVENGING SYSTEMS - TRANSFER AND RECEIVING SYSTEMS
NBR 8370 : 1998	EQUIPAMENTO ELETRICO PARA ATMOSFERA EXPLOSIVA - TERMINOLOGIA
SAE J 2578 : 2014	RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
NF EN 60079-15 : 2010	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
PREN 12405-3 : DRAFT 2013	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
03/313403 DC : DRAFT SEP 2003	IEC 60079-27 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
BIS IS/IEC 60079-25 : 2010	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
PREN 12261 : DRAFT 2017	GAS METERS - TURBINE GAS METERS
IEC TS 60079-39 : 1ED 2015	EXPLOSIVE ATMOSPHERES - PART 39: INTRINSICALLY SAFE SYSTEMS WITH ELECTRONICALLY CONTROLLED SPARK DURATION LIMITATION
IEC 60079-3 : 3ED 90	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SPARK TEST APPARATUS FOR INTRINSICALLY-SAFE CIRCUITS
I.S. EN 60079-27:2008	EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
CEI EN 61784-5-3 : 2014	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
BS EN 60079-2 : 2014	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
CSA E60079.6 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
CSA C22.4 No. 1 : 2009(R2018)	OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE
NBR IEC 60601-2-13 : 2004	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
UNE EN 60079-10-2 : 2016	EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
I.S. EN 60079-28:2015	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
I.S. EN 61158-2:2014	INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
ISA 12.13.01 : 2003	PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
CSA C22.2 No. 60079.0 : 2015	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
VDE 0660-212 : 2000	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
CSA E60079.5 : 2002 : R2011	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS
CSA E60079.15 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n"
UNE EN 15714-2 : 2010	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
BS EN 61779-1 : 2000	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
CAN/CSA-C22.2 NO No. 60079-29-1 : 2017	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
I.S. EN ISO 16904:2016	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016)
BS 7701(1993) : 1993	SPECIFICATION FOR FLOAT-TYPE LEVEL GAUGES FOR MEASURING LIQUID LEVELS IN TANKS CONTAINING REFRIGERATED LIGHT-HYDROCARBON FLUIDS
06/30149534 DC : DRAFT APR 2006	IEC 60079-27 - EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
BIS IS/IEC 60079-26 : 2006	EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
UNE-EN 60079-25:2017	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
CSA E60079.6 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 6: OIL-IMMERSION "O"
BS ISO 15970 : 2008	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
BS EN 61784-1 : 2014	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
NF EN 1474-1 : 2009	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
DIN EN 16299 E : 2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
UNE EN 12405-3 : 2016	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
CSA E60079.5 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS
CSA E60079.15 : 2002 : R2011	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n"
IEC 60079-1 REDLINE : 7ED 2014	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
UNE-EN 12405-1:2006	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
BIS IS/IEC 60079-7 : 2006	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
DIN EN 15714-2 : 2010	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
UNI EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
CSA E60079.5 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - SAND-FILLED APPARATUS
UNI EN 12405-1 : 2010	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
UNE EN 16299 : 2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
PREN 12942 : DRAFT 2016	RESPIRATORY PROTECTIVE DEVICES - POWER FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
I.S. EN 1474-1:2008	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN AND TESTING OF MARINE TRANSFER SYSTEMS - PART 1: DESIGN AND TESTING OF TRANSFER ARMS
ISO TS 19880-1 : 2016	GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS
BIS IS/IEC 60079-20-1 : 2010	EXPLOSIVE ATMOSPHERES - PART 20: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - SECTION 1: TEST METHODS AND DATA
UNI EN ISO 15970 : 2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
ISO/IEC 80079-20-1 : 2017	EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
I.S. EN 62952-1:2016	POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
CSA Z8835.5 : 2006	INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS
BS EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
I.S. EN 60079-7:2015	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
ISO 23551-1 : 2012	SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
BS EN 12405-1 : 2005	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
I.S. EN 60601-2-13:2006	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
UNE EN 60079-29-1 : 2017	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
I.S. EN 60445:2017	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
ISO 10574 : 1993	REFRIGERATED LIGHT-HYDROCARBON FLUIDS - MEASUREMENT OF LIQUID LEVELS IN TANKS CONTAINING LIQUEFIED GASES - FLOAT-TYPE LEVEL GAUGES
I.S. EN 60079-1:2014	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
18/30369304 DC : DRAFT APR 2018	BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 60079-10-2:2015	EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
I.S. EN 60079-29-1:2016	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
IEEE 1349 : 2011	GUIDE FOR THE APPLICATION OF ELECTRIC MOTORS IN CLASS 1, DIVISION 2 AND CLASS 1, ZONE 2 HAZARDOUS (CLASSIFIED) LOCATIONS
I.S. EN 60079-26:2015	EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
BS EN 62657-1 : 2017	INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS (IEC 62657-1:2017)
I.S. EN 60079-5:2015	EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
I.S. EN 61784-5-3:2013	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
NBR 8446 : 1984	APARELHO DE FAISCAMENTO PARA ENSAIO DE CIRCUITOS INTRINSECAMENTE SEGUROS
ISA 61241-1 : 2006	ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD"
EN 60445 : 2017	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS (IEC 60445:2017 + COR1:2017)
CSA E60079.0 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS
I.S. EN 62708:2015	DOCUMENT KINDS FOR ELECTRICAL AND INSTRUMENTATION PROJECTS IN THE PROCESS INDUSTRY
I.S. EN 12405-3:2015	GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER
I.S. EN 60079-17:2014	EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
NF EN 60079-25 : 2011	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
DIN EN 14116 : 2014	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
BS EN 60079-29-1 : 2007	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
DIN EN 1127-1 E : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 62013-1:2006	CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
I.S. EN 50270:2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
I.S. EN 50050:2006	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
CEI EN 61784-1 : 2016	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
I.S. EN 60079-15:2010	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
BS EN 60079-19 : 2011	EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
IEC 60445 : 6.0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF EQUIPMENT TERMINALS, CONDUCTOR TERMINATIONS AND CONDUCTORS
SR CEN/TR 16787:2014	INDUSTRIAL GAS INSTALLATION - GUIDELINE
I.S. EN 61241-1:2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD"
I.S. EN ISO 15970:2014	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
I.S. EN 15714-2:2009	INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS
I.S. EN 62657-1:2017	INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
I.S. EN ISO 8835-3:2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
I.S. EN ISO 16923:2018	NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
PREN 1127-2 : DRAFT 2012	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
EN 60079-18 : 2015 AMD 1 2017	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
I.S. EN 60446:2007	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
I.S. EN 14236:2007	ULTRASONIC DOMESTIC GAS METERS
ISO 12649 : 2004	GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
CEI EN 60079-18 : 2016	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
CEI EN 60079-20-1 : 2010	EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
CEI EN 60079-25 : 2012	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
BS EN 62013-1 : 2006	CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
EN 16657 : 2016	TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS
BS EN 1127-1 : 2019	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNI EN ISO 12100 : 2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
BS EN ISO 8846 : 2017	SMALL CRAFT - ELECTRICAL DEVICES - PROTECTION AGAINST IGNITION OF SURROUNDING FLAMMABLE GASES (ISO 8846:1990)
UNE-EN 60079-20-1:2014	EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
BS EN 60079-0 : 2012	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
UNE-EN 60079-19:2011	EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
NF EN 60079-35-1 : 2011	EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
I.S. EN 60079-18:2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
API 505 : 1997	RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
GOST R 52350.15 : 2005	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 15: CONSTRUCTION, TEST AND MARKING OF TYPE OF PROTECTION "N" ELECTRICAL APPARATUS
IEC 60079-15 : 2017	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
ISO 23550 : 2011	SAFETY AND CONTROL DEVICES FOR GAS AND/OR OIL BURNERS AND APPLIANCES - GENERAL REQUIREMENTS
I.S. EN 13616-1:2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
NF EN 60601 2-13 : 2007 AMD 1 2007	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
NF EN 60079-20-1 : 2010	EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
DIN EN ISO/IEC 80079-38 : 2012	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
CSA C22.2 No. 60079-25 : 2014	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
17/30356734 DC : 0	BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS
I.S. EN 61241-11:2007	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 11: PROTECTION BY INTRINSIC SAFETY "ID"
IEC 61241-0 : 1.0	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
I.S. EN 61779-1:2003	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
DIN EN 60947-5-6 : 2000	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS, DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
EN 12261 : 2018	GAS METERS - TURBINE GAS METERS
17/30356731 DC : 0	BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
DIN EN 14236 E : 2008	ULTRASONIC DOMESTIC GAS METERS
15/30302889 DC : 0	BS EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BIS IS/IEC 60079-28 : 2006	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
IEC 60079-15 REDLINE : 5ED 2017	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
NBR IEC 60079-7 : 2008 ERRATA 2010	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY
UNE EN ISO 12100 : 2012	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION (ISO 12100:2010)
17/30348250 DC : 0	BS EN 12941 - RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A LOOSE FITTING RESPIRATORY INTERFACE - REQUIREMENTS, TESTING, MARKING
BS EN 60079-15 : 2010	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
PREN 14116 : DRAFT 2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR THE PRODUCT RECOGNITION DEVICE
IEC 60079-29-1 : 2.0	EXPLOSIVE ATMOSPHERES - PART 29-1: GAS DETECTORS - PERFORMANCE REQUIREMENTS OF DETECTORS FOR FLAMMABLE GASES
BS PD IEC TR 60601-4-3 : 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
I.S. EN ISO 80601-2-13:2012	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
IEC 60079-33 : 1.0	EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
NF EN 60076-16 : 2012	POWER TRANSFORMERS - PART 16: TRANSFORMERS FOR WIND TURBINES APPLICATION
IEC 60079-0 : 7.0	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BIS IS 2148 : 2004 AMD 2 2008	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - FLAMEPROOF ENCLOSURES "D"
CEI EN 60079-28 : 2016	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
CSA E60079.15 : 2002	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL APPARATUS WITH TYPE OF PROTECTION "n"
I.S. EN 61784-1:2014	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
BS EN 1127-1 : 2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
CEI EN 60079-15 : 2012	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
BIS IS/IEC 60079-15 : 2005	ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 15: CONSTRUCTION, TEST AND MARKING OF TYPE OF PROTECTION 'N' ELECTRICAL APPARATUS
NF EN 50050 : 2007	ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT
NF EN 50270 : 2015	ELECTROMAGNETIC COMPATIBILITY - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF COMBUSTIBLE GASES, TOXIC GASES OR OXYGEN
CEI EN 60601-2-13 : 2007	MEDICAL ELECTRICAL EQUIPMENT - PART 2: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
UNE-EN 60079-7:2016	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
UNI EN 16299 : 2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
IEC 60079-2 REDLINE : 6ED 2014	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
EN 60079-19 : 2011 AMD 1 2015	EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010)
IEC 60079-0 REDLINE : 7.0	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN 13616-2 : 2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
CSA Z8835.3 : 2008	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
08/30191192 DC : DRAFT OCT 2008	BS EN 60079-20-1 - EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS - GAS AND VAPOUR CLASSIFICATION, TEST METHODS AND DATA
14/30316829 DC : DRAFT NOV 2014	BS EN 62952-1 ED. 1.0 - POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER SOURCES
ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
14/30316021 DC : 0	BS EN 62657-1 - INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
I.S. EN ISO/IEC 80079-38:2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
NFC 01 426 : 2008 AMD 1 2015	ELECTROTECHNICAL VOCABULARY - PART 426: EQUIPMENT FOR EXPLOSIVE ATMOSPHERES
I.S. EN 12405-1:2005	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
IEC 61779-6 : 1.0	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 6: GUIDE FOR THE SELECTION, INSTALLATION, USE AND MAINTENANCE OF APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES
DIN EN ISO/IEC 80079-38 E : 2017	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
UNE EN 50223 : 2016	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
UNE EN 13616-1 : 2016	OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
DIN EN 16299 : 2013	CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
UNE-EN 14116:2013	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
EN 12480 : 2018	GAS METERS - ROTARY DISPLACEMENT GAS METERS
EN 12405-1 : 2005 + A2 2010	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
EN ISO/IEC 80079-38 : 2016	EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
EN 14236 : 2007	ULTRASONIC DOMESTIC GAS METERS
I.S. EN ISO 12100:2010	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
IEC 60079-18 : 2014 REDLINE	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
IEC 62401 : 2.0	RADIATION PROTECTION INSTRUMENTATION - ALARMING PERSONAL RADIATION DEVICES (PRDS) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
IEC 60079-10-2 REDLINE : 2ED 2015	EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
I.S. EN 50223:2015	STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
IEC 60079-5 REDLINE : 4ED 2015	EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
IEC TS 62603-1 : 1ED 2014	INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
I.S. EN 61241-0:2006	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS
IEC 60050-426 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 426: EQUIPMENT FOR EXPLOSIVE ATMOSPHERES
ISO 4512 : 2000(R2011)	PETROLEUM AND LIQUID PETROLEUM PRODUCTS - EQUIPMENT FOR MEASUREMENT OF LIQUID LEVELS IN STORAGE TANKS - MANUAL METHODS
I.S. EN 12480:2018	GAS METERS - ROTARY DISPLACEMENT GAS METERS
IEC 62657-1 : 1ED 2017	INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS
IEC 61892-7:2014	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
I.S. EN 12261:2002	GAS METERS - TURBINE GAS METERS
IEC 60092-502 ED 5 : 1999	ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
I.S. EN 1127-1:2011	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
IEC 61241-1-1 : 2.0	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-1 - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES AND SURFACE TEMPERATURE LIMITATION - SPECIFICATION FOR APPARATUS
IEC 60079-26 REDLINE : 3ED 2014	EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
IEC 61918 : 3.0	INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
IEC TR 61831 : 2.0	ON-LINE ANALYSER SYSTEMS - GUIDE TO DESIGN AND INSTALLATION
IEC TS 60079-43 : 1ED 2017	EXPLOSIVE ATMOSPHERES - PART 43: EQUIPMENT IN ADVERSE SERVICE CONDITIONS
IEC 60079-7:2015-06+AMD1:2017-08 CSV	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
DIN EN 12312-5 : 2009	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
IEC TR 60601-4-3 : 1ED 2015	MEDICAL ELECTRICAL EQUIPMENT - PART 4-3: GUIDANCE AND INTERPRETATION - CONSIDERATIONS OF UNADDRESSED SAFETY ASPECTS IN THE THIRD EDITION OF IEC 60601-1 AND PROPOSALS FOR NEW REQUIREMENTS
IEC 60079-18 : 4.0EN+(REDLINE+VERSION)	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
IEC 60079-1 : 7.0EN+(REDLINE+VERSION)	EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
IEC 60079-7:2015+AMD1:2017 CSV	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
EN 60079-7 : 2015 AMD 1 2018	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
BS EN ISO 80601.2.13:2012+A2:2019	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
BS PD 60079-14 : 2000	GUIDE TO APPLICATION OF BS EN 60079-14
EN 61918 : 2013 COR 2014	INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
EN 13922 : 2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
DIN EN ISO 8835-5 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHESIA VENTILATORS
EEMUA 186 : 2016	A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 12312-5 E : 2009	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 1010-1 : 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 13852-1 E : 2014	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
DIN EN 12941 : 2009	RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
DIN EN 12942 : 2009	RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
DIN EN ISO 8835-4 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES
DIN EN 12621 : 2011	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 12581 : 2011	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13922 E : 2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
DIN EN 13617-1 : 2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
DIN EN 1473 : 2016	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
DIN EN 14116 E : 2014	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
DIN EN 12405-1 : 2011	GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION
DIN EN 1010-1 E : 2011	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 13617-1 E : 2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
DIN EN 12941 E : 2009	RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
DIN EN 61158-2 : 2015	INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014)
DIN EN 13852-1 : 2014	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
DIN EN 12581 E : 2011	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13922 : 2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
DIN EN 12942 E : 2009	RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
DIN EN 12621 E : 2011	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
DIN EN 15208 : 2014	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
DIN EN 14236 : 2008	ULTRASONIC DOMESTIC GAS METERS
ISO 12100-2 : 2003	SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
ISO 8835-5 : 2004	INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS
UNE-EN 1127-1:2012	EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
BS ISO 26142 : 2010	HYDROGEN DETECTION APPARATUS - STATIONARY APPLICATIONS
BS EN 61241-18 : 2004	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 18: PROTECTION BY ENCAPSULATION "MD"
BS EN 15208 : 2014	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SEALED PARCEL DELIVERY SYSTEMS - WORKING PRINCIPLES AND INTERFACE SPECIFICATIONS
IEC 61784-1 : 4.0	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
IEC 60079-17 : 5.0	EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
12/30269297 DC : 0	BS EN 60079-14/ED 5 - EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
BS EN 12581 : 2005	COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
13/30286778 DC : 0	BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
11/30258071 DC : 0	BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
09/30214292 DC : 0	BS EN 60079-35-1 - CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
BS EN 50628 : 2016	ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
IEC 62013-1 : 2.0	CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
UNE EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
BS EN 61158-2 : 2014	INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
BS EN 14116 : 2012	TANKS FOR TRANSPORT OF DANGEROUS GOODS - DIGITAL INTERFACE FOR PRODUCT RECOGNITION DEVICES FOR LIQUID FUELS
BS EN 1010-1 : 2004	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 61918 : 2013	INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
IEC 61158-2 : 6.0	INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
UNE-EN 60079-14:2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
ISO 8835-3 : 2007	INHALATIONAL ANAESTHESIA SYSTEMS - PART 3: TRANSFER AND RECEIVING SYSTEMS OF ACTIVE ANAESTHETIC GAS SCAVENGING SYSTEMS
IEC 60079-28:2.0	EXPLOSIVE ATMOSPHERES - PART 28: PROTECTION OF EQUIPMENT AND TRANSMISSION SYSTEMS USING OPTICAL RADIATION
12/30264905 DC : 0	BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
08/30190078 DC : DRAFT SEP 2008	BS ISO 26142 - HYDROGEN DETECTOR
10/30215301 DC : 0	ISO 23551-1 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
BS EN 12312-5 : 2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
UNE-EN ISO 80601-2-13:2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
ISO 19859 : 2016-06	GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
IEC 60079-20-1 : 1.0	EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
09/30206527 DC : 0	BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
BS EN 1473 : 2016	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
IEC 61779-1 : 1.0	ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
09/30205023 DC : 0	BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
BS EN 62694 : 2016	RADIATION PROTECTION INSTRUMENTATION - BACKPACK-TYPE RADIATION DETECTOR (BRD) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
IEC 60079-10-2 : 2.0EN+(REDLINE+VERSION)	EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
IEC 60079-26 : 3.0EN+(REDLINE+VERSION)	EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
BS EN 60079-18 : 2015	EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
14/30244780 DC : 0	BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS IEC 61892-7 : 2014	MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
BS EN 13852-1 : 2013	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
BS EN 12942 : 1999	RESPIRATORY PROTECTIVE DEVICES - POWER ASSISTED FILTERING DEVICES INCORPORATING FULL FACE MASKS, HALF MASKS OR QUARTER MASKS - REQUIREMENTS, TESTING, MARKING
13/30245874 DC : 0	BS IEC 62694 ED 1.0 - RADIATION PROTECTION INSTRUMENTATION - BACKPACK-TYPE RADIATION DETECTOR (BRD) FOR DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
BS EN ISO 8835-5 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 5: ANAESTHETIC VENTILATORS
BS EN ISO 8835-4 : 2009	INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES
IEC 62952-1 : 1ED 2016	POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE - PART 1: GENERAL REQUIREMENTS OF POWER MODULES
IEC 62708 : 1ED 2015	DOCUMENT KINDS FOR ELECTRICAL AND INSTRUMENTATION PROJECTS IN THE PROCESS INDUSTRY
BS EN 60654-2 : 1998	OPERATING CONDITIONS FOR INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL EQUIPMENT - PART 2: POWER
IEC 60079-2 : 6.0EN+(REDLINE+VERSION)	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
IEC 61241-1 : 1.0	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD'
IEC 60079-27 : 2.0	EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
ISO 26142 : 2010(R2015)	HYDROGEN DETECTION APPARATUS - STATIONARY APPLICATIONS
IEC 60079-25 : 2.0	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
BS EN 14236 : 2007	ULTRASONIC DOMESTIC GAS METERS
BS EN 61784-5-3 : 2013	INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
BS EN 13617-1 : 2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
BS EN 12621 : 2006	MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS
05/30138005 DC : DRAFT AUG 2005	IEC 60079-14 ED 4 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
UNE-EN 60079-0:2013	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
12/30276304 DC : 0	BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
BS EN 60079-35-1 : 2011	EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINESM SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
IEC 60947-5-6 : 1.0	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-6: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - DC INTERFACE FOR PROXIMITY SENSORS AND SWITCHING AMPLIFIERS (NAMUR)
IEC 62694 : 1ED 2014	RADIATION PROTECTION INSTRUMENTATION - BACKPACK-TYPE RADIATION DETECTOR (BRD) FOR THE DETECTION OF ILLICIT TRAFFICKING OF RADIOACTIVE MATERIAL
IEC 61241-11 : 1.0	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 11: PROTECTION BY INTRINSIC SAFETY 'ID'
IEC 60079-5 : 4.0EN+(REDLINE+VERSION)	EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
DIN EN 1473 E : 1997	INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
UNE-EN 13617-1:2012	PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
IEC 60601-2-13 : 3.1	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR THE SAFETY AND ESSENTIAL PERFORMANCE OF ANAESTHETIC SYSTEMS
IEC 60446 : 0	BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - IDENTIFICATION OF CONDUCTORS BY COLOURS OR ALPHANUMERICS
ISO 22734-2 : 2011	HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
BS ISO 19859 : 2016	GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
ISO 80601-2-13 : 2011(R2017)	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
05/30134569 DC : DRAFT JUN 2005	IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
ISO 8835-4 : 2004	INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES
BS PD CLC/TR 60079-33 : 2015	EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
IEC 61241-18 : 1.0	ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 18: PROTECTION BY ENCAPSULATION "MD"
BS IEC 60079-33 : 2012	EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
IEC 60079-19 : 3.1	EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
IEC 60079-35-1 : 1.0	EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
BS EN 12941 : 1999	RESPIRATORY PROTECTIVE DEVICES - POWERED FILTERING DEVICES INCORPORATING A HELMET OR A HOOD - REQUIREMENTS, TESTING, MARKING
13/30271432 DC : 0	BS EN 60079-18 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
ONORM EN ISO 80601-2-13 : 2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION (ISO 80601-2-13:2011)
BS EN 13922 : 2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
UNI EN ISO 80601-2-13 : 2013	MEDICAL ELECTRICAL EQUIPMENT - PART 2-13: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AN ANAESTHETIC WORKSTATION
BS ISO 22734-2 : 2011	HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
UNE EN 60079-2 : 2015	EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURE 'P'
UNE-EN 13922:2012	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
UNE EN 13852-1 : 2014	CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
UNE EN 60079-35-1 : 2012	EXPLOSIVE ATMOSPHERES - PART 35-1: CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
ISO 15970 : 2008(R2017)	NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
I.S. EN 13922:2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
ISO 16904 : 2016	PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS
BS EN 60079-14 : 2014	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION
ISO 12100 : 2010(R2015)	SAFETY OF MACHINERY - GENERAL PRINCIPLES FOR DESIGN - RISK ASSESSMENT AND RISK REDUCTION
ASTM F 2363/F2363M : 2017 : REDLINE	Standard Specification for Sewage and Graywater Flow Through Treatment Systems
UNI EN 13922 : 2011	TANKS FOR TRANSPORT OF DANGEROUS GOODS - SERVICE EQUIPMENT FOR TANKS - OVERFILL PREVENTION SYSTEMS FOR LIQUID FUELS
BIS IS/IEC 60079-0 : 2011	EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
EN 60079-14 : 2014 COR 2016	EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016)
EN 60079-15 : 2010	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
OVE/ONORM EN 60079-7 : 2007	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E"

Standards Referencing This Book - (Show below) - (Hide below)

IEC 60112 : 4.1	METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
IEC 61158-2 : 6.0	INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
IEC 60317-3 : 3.1	SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 3: POLYESTER ENAMELLED ROUND COPPER WIRE, CLASS 155
IEC 60317-7 : 3.2	SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - POLYIMIDE ENAMELLED ROUND COPPER WINDING WIRE, CLASS 220
IPC 2152 : 0	STANDARD FOR DETERMINING CURRENT CARRYING CAPACITY IN PRINTED BOARD DESIGN
IEC 60079-7:2015-06+AMD1:2017-08 CSV	EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
IEC 60317-8 : 4.0	SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 8: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180
IEC 62013-1 : 2.0	CAPLIGHTS FOR USE IN MINES SUSCEPTIBLE TO FIREDAMP - PART 1: GENERAL REQUIREMENTS - CONSTRUCTION AND TESTING IN RELATION TO THE RISK OF EXPLOSION
AS/NZS 80079.20.1:2019	Explosive atmospheres Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017, (ED. 1.0)/COR1:2018, MOD)
IEC 60050-426 : 2.0	INTERNATIONAL ELECTROTECHNICAL VOCABULARY - PART 426: EQUIPMENT FOR EXPLOSIVE ATMOSPHERES
IEC 60085 : 4.0	ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
AS/NZS 60079.15:2020	Explosive atmospheres Equipment protection by type of protection “n” (IEC 60079-15:2017 (ED.5.0) MOD)
IEC 60317-13 : 3.0:2010	SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 13: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV	DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
IEC 60079-25 : 2.0	EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
IEC 60079-0 : 6.0	EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
UL 248-1 : 3	LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
IEC 60664-3 : 3.0:2016	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
UL 1642 : 5	LITHIUM BATTERIES
IEC 62133 : 2.0EN+(REDLINE+VERSION)	SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS
IEC 60664-1 : 2.0	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
IEC 60079-15 : 4.0	EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION 'N'
IEC 61086-1 : 2.0:2004	COATINGS FOR LOADED PRINTED WIRE BOARDS (CONFORMAL COATINGS) - PART 1: DEFINITIONS, CLASSIFICATION AND GENERAL REQUIREMENTS

Add To Cart

Product Format

Quantity

add to cart

IEC 60079-11 : 6.0

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?