• There are no items in your cart

IEC 60079-14:2013

Current
Current

The latest, up-to-date edition.

Explosive atmospheres - Part 14: Electrical installations design, selection and erection
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

11-28-2013

IEC 60079-14:2013 contains the specific requirements for the design, selection, erection and initial inspection of electrical installations in, or associated with, explosive atmospheres. Where the equipment is required to meet other environmental conditions, for example, protection against ingress of water and resistance to corrosion, additional protection requirements may be necessary. The requirements of this standard apply only to the use of equipment under standard atmospheric conditions as defined in IEC 60079-0. For other conditions, additional precautions may be necessary, and the equipment should be certified for these other conditions. For example, most flammable materials and many materials which are normally regarded as non-flammable might burn vigorously under conditions of oxygen enrichment. These requirements are in addition to the requirements for installations in non-hazardous areas. This standard applies to all electrical equipment including fixed, portable, transportable and personal, and installations, permanent or temporary. No account is taken in this Standard of the toxic risks that are associated with flammable gases, liquids and dusts in concentrations that are usually very much less than the lower explosive limit. In locations where personnel may be exposed to potentially toxic concentrations of flammable material, appropriate precautions should be taken. Such precautions are outside the scope of this Standard. This fifth edition cancels and replaces the fourth edition published in 2007. This edition constitutes a technical revision. Refer to the document's Foreward for a listing of the specific revisions and additional Notes. Key words: requirements for the design, selection, erection and initial inspection of electrical installations in explosive atmospheres.
The contents of the corrigendum of January 2016, the interpretation sheet 1 of February 2017 and March 2020 have been included in this copy.

Committee
TC 31/SC 31J
DevelopmentNote
NEW CHILD ISH 2 2020 IS ADDED
DocumentType
Standard
ISBN
978-2-8322-1276-9
Pages
298
ProductNote
THIS STANDARD ALSO REFERS TO IEC/TR 60079-16, NEW CHILD ISH 2 2020 IS ADDED
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

I.S. 821:2006 GAS PRESSURE REGULATING STATIONS FOR DISTRIBUTION
IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
DIN EN 14161:2015-07 ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN
UNE-EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
IEC 60079-29-2 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
BS IEC 60079-19:1993 Electrical apparatus for explosive gas atmospheres Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)
PREN 13952 : DRAFT 2015 LPG EQUIPMENT AND ACCESSORIES - FILLING PROCEDURES FOR LPG CYLINDERS
PREN 50050-1 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
I.S. HD 60364-4-42:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS
03/107320 DC : DRAFT APR 2003 EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
BS ISO 16924 : 2016 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
CLC/TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
I.S. EN 60079-20-1:2010 EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
UNE-EN 50050-2:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder
BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems General requirements
11/30248849 DC : 0 BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
13/30279579 DC : 0 BS ISO 19372 - MICROTURBINES APPLICATIONS - SAFETY
13/30271404 DC : DRAFT DEC 2013 BS ISO 16923 - NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
BS EN 15001-2:2008 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for commissioning, operation and maintenance
09/30198043 DC : 0 BS EN 1127-1 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 60079-27:2008 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
UNE-EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
13/30273033 DC : 0 BS EN 1012-3 - COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNE-EN 60079-1:2015 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
09/30198404 DC : DRAFT JAN 2009 BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELD BUS PROFILES
IEC 60335-2-69 REDLINE : 5.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
DIN EN 61784-1:2015-02 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES (IEC 61784-1:2014)
BS EN 61241-17:2005 Electrical apparatus for use in the presence of combustible dust Inspection and maintenance of electrical installations in hazardous areas (other than mines)
CEI EN 60079-27 : 2010 EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
06/30149825 DC : DRAFT MAY 2006 EN 60079-25 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE SYSTEMS
CSA C22.2 No. 60079.1 : 2016 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS EN 50054:1999 Electrical apparatus for the detection and measurement of combustible gases. General requirements and test methods
10/30227671 DC : 0 BS EN 14678-1 - LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
12/30260078 DC : 0 BS EN 60092-502 IEC 60092-502 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 502: TANKERS - SPECIAL FEATURES
BS EN 50281-1-2:1999 Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Selection, installation and maintenance
BS EN 14677:2008 Safety of machinery. Secondary steelmaking. Machinery and equipment for treatment of liquid steel
07/30162732 DC : 0 BS EN 60079-10-2 - EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - COMBUSTIBLE DUST ATMOSPHERES
06/30157092 DC : 0 ISO/DIS 21789 - GAS TURBINE APPLICATIONS - SAFETY
03/313403 DC : DRAFT SEP 2003 IEC 60079-27 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
BIS IS/IEC 60079-25 : 2010 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
UNE-EN 60079-10-1:2016 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
CSA C22.2 No. 60079.0 : 2015 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
NF EN 15268 : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND SUBMERSIBLE PUMP ASSEMBLIES
IEC 60079-33:2012 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
BIS IS/IEC 60079-20-1 : 2010 EXPLOSIVE ATMOSPHERES - PART 20: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - SECTION 1: TEST METHODS AND DATA
I.S. EN 60079-7:2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
CEI EN 60079-20-1 : 2010 EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
I.S. EN 50176:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 60079-30-2:2017 EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN 16299:2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
S.R. HD 60364-4-42:2011 LOW VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS
BS EN 60079-19 : 2011 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
IEC 60335-2-40:2018 Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
S.R. CEN/TR 16787:2014 INDUSTRIAL GAS INSTALLATION - GUIDELINE
I.S. EN ISO 15970:2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
ISO 16923:2016 Natural gas fuelling stations — CNG stations for fuelling vehicles
PD CLC/TR 60079-32-1:2015 Explosive atmospheres Electrostatic hazards, guidance
S.R. HD 60364-5-56:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES
UNE-EN 50050-3:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock
18/30369304 DC : DRAFT APR 2018 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 61779-1:2003 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
GOST R IEC 62086-2 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
EN 60079-19:2011/A1:2015 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION (IEC 60079-19:2010)
IEC 61241-1-2:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance
EN ISO 80079-36:2016 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
I.S. EN 12954:2001 CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES
EN IEC 60079-7:2015/A1:2018 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015/A1:2017)
BS EN ISO 80079-36:2016 Explosive atmospheres Non-electrical equipment for explosive atmospheres. Basic method and requirements
DIN EN 1473:2016-10 Installation and equipment for liquefied natural gas - Design of onshore installations
BS EN 1755:2015 Industrial Trucks. Safety requirements and verification. Supplementary requirements for operation in potentially explosive atmospheres
UNE-EN 1127-1:2012 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
IEC 60079-26:2014 RLV Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
BS EN 60079-18 : 2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN 14197-3:2004 Cryogenic vessels. Static non-vacuum insulated vessels Operational requirements
IEC 62086-2:2001 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2: Application guide for design, installation and maintenance
CLC/TR 60079-33:2015 Explosive atmospheres - Part 33: Equipment protection by special protection 's'
EN 60079-26:2015 Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga
EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
IEC 60335-2-40:2018 RLV Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
EN 60079-25:2010/AC:2013 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010)
EN 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
DIN EN 12312-5:2009-08 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009)
EN 1010-1:2004+A1:2010 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
EN 50177:2009/A1:2012 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
EN 61784-5-3:2013 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
EN 12779:2015 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
EN 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
HD 60364-4-42 : 2011 AMD 1 2015 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-42: PROTECTION FOR SAFETY - PROTECTION AGAINST THERMAL EFFECTS (IEC 60364-4-42:2010/A1:2014)
EN 12954 : 2001 CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES
EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
EN 50050-3:2013 Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock
EN 61784-1:2014 Industrial communication networks - Profiles - Part 1: Fieldbus profiles
HD 60364-5-54:2011/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
EN 62086-2:2005 Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 2: Application guide for design, installation and maintenance
DEFSTAN 00-101(PT3)/1(2005) : 2005 DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION
DEFSTAN 00-101(PT3)/2(2008) : 2008 DESIGN STANDARDS FOR EXPLOSIVES SAFETY IN MOD SHIPS AND SUBMARINES - PART 3: ELECTRICAL EQUIPMENT AND INSTALLATION
EN 50054:1998 Electrical apparatus for the detection and measurement of combustible gases - General requirements and test methods
04/30105027 DC : DRAFT JUNE 2004 ISO 21789 - GAS TURBINES - SAFETY
S.R. CLC/TR 60079-32-1:2015 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE
DIN EN 14678-3:2013-03 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
BS EN 16299:2013 Cathodic protection of external surfaces of above ground storage tankbases in contact with soil or foundations
I.S. EN 45510-2-9:2008 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
10/30189547 DC : 0 BS EN 62603 ED 1 - INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR EVALUATING THE PERFORMANCES OF PROCESS CONTROL SYSTEMS
BS EN 60079-26:2015 Explosive atmospheres Equipment with Equipment Protection Level (EPL) Ga
03/300201 DC : DRAFT FEB 2003 IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
NF EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
NF EN 60079-19 : 2011 AMD 1 2015 EXPLOSIVE ATMOSPHERES - PART 19: EQUIPMENT REPAIR, OVERHAUL AND RECLAMATION
08/30191192 DC : DRAFT OCT 2008 BS EN 60079-20-1 - EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS - GAS AND VAPOUR CLASSIFICATION, TEST METHODS AND DATA
11/30248842 DC : 0 BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN 60079-29-2:2015 Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen
CEN/TR 16787:2014 Industrial Gas Installation - Guideline
BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
00/241099 DC : DRAFT MAR 2000 IEC 60079-17 EDITION 3 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
BS EN 62086-2:2005 Electrical apparatus for explosive gas atmospheres. Electrical resistance trace heating Application guide for design, installation and maintenance
I.S. EN 60079-25:2010 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010 (EQV))
PD CLC/TS 62603-1:2014 Industrial process control systems. Guideline for evaluating process control systems Specifications
BS EN 60079-27:2008 Explosive atmospheres Fieldbus intrinsically safe concept (FISCO)
10/30230365 DC : 0 BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
BS EN 14678-3:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises
12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
EN 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
DIN EN ISO 15970:2014-09 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
BS EN 62305-3:2011 Protection against lightning Physical damage to structures and life hazard
BS EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material. Safety requirements
06/30160085 DC : 0 BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
BS EN 15268:2008 Petrol filling stations. Safety requirements for the construction of submersible pump assemblies
CEI EN 50176 : 2010 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS
12/30270980 DC : 0 BS EN 1127-2 - EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
ISA 60079-27 : 2006 FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
07/30170577 DC : DRAFT AUG 2007 BS ISO 13623 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
PD ISO/TS 19883:2017 Safety of pressure swing adsorption systems for hydrogen separation and purification
ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
I.S. EN ISO 80079-36:2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014)
EN 50174-2 : 2009 AMD 2 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
IEC 60079-13:2017 Explosive atmospheres - Part 13: Equipment protection by pressurized room "p" and artificially ventilated room "v"
IEC 60079-0:2017 Explosive atmospheres - Part 0: Equipment - General requirements
BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
BS EN 60079-7 : 2015 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E' (IEC 60079-7:2015)
I.S. EN 1127-1:2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
I.S. EN 1012-3:2013 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
BS EN 50177 : 2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
UNI EN 15268 : 2009 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
BS IEC 60092-101:1994 Electrical installation in ships Definitions and general requirements
UNE-IEC 60092-101:2010 Electrical installations in ships - Part 101: Definitions and general requirements
C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
CEI EN 60079-25 : 2012 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
CEI EN 50174-3 : 2014 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
I.S. EN 13616-1:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS -PART 1: OVERFILL PREVENTION DEVICES WITH CLOSURE DEVICE
I.S. EN 50177:2009 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS
NF EN 60079-20-1 : 2010 EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
IEC 60335-2-40 REDLINE : 6.0 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
NF EN 50174-2 : 2009 AMD 1 2011 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
CEI EN 62305-3 : 2013 PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD
ISO 23552-1:2007 Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type
EN 50310:2016 Telecommunications bonding networks for buildings and other structures
IEC TR 61831:2011 On-line analyser systems - Guide to design and installation
IEC TS 60079-43:2017 Explosive atmospheres - Part 43: Equipment in adverse service conditions
I.S. EN 62086-2:2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN 15268:2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
IEC 60079-1:2014 RLV Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-7:2015+AMD1:2017 CSV Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
DIN EN 1010-1:2011-06 Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010)
DIN EN 14197-3:2005-09 Cryogenic vessels - Static non vacuum insulated vessels - Part 3: Operational requirements
DIN EN 12215:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
IEC 60079-10-1:2015 RLV Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
DIN EN 12981:2010-06 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 13617-1:2012-08 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
DIN EN ISO 80079-36 E : 2016 EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016)
UNE-HD 60364-5-56:2010 Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services
BS EN 12981 : 2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
14/30282403 DC : 0 BS ISO/IEC 30129 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
ISO 80079-36:2016 Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements
ISO 19859:2016 Gas turbine applications Requirements for power generation
IEC 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
09/30206527 DC : 0 BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
UNE-EN 50310:2016 Telecommunications bonding networks for buildings and other structures
09/30205023 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
EEMUA 181 : 1995 GUIDE TO RISK BASED ASSESSMENTS OF IN-SITU LARGE EX 'E' AND EX 'N' MACHINES
BIS IS/IEC 60079-0 : 2011 EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
I.S. EN 13952:2017 LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS
DIN EN 1755:2016-02 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
DIN EN 1473:1997-11 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 12215:2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 1127-1:2011-10 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
DIN EN 1776:2016-05 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
Z462-18 Workplace electrical safety
I.S. EN 13852-1:2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL - PURPOSE OFFSHORE CRANES
I.S. EN 14161:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
I.S. EN 12981:2005 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 1755:2015 INDUSTRIAL TRUCKS - SAFETY REQUIREMENTS AND VERIFICATION - SUPPLEMENTARY REQUIREMENTS FOR OPERATION IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN 12312-5:2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
EN 60079-10-1:2015 Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres
ISA 60079-7 : 2008 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E"
I.S. EN 12186:2014 GAS INFRASTRUCTURE - GAS PRESSURE REGULATING STATIONS FOR TRANSMISSION AND DISTRIBUTION - FUNCTIONAL REQUIREMENTS
I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
I.S. EN 12779:2015 SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS
I.S. EN 1473:2016 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
I.S. EN 13617-1:2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
EN 12312-5:2005+A1:2009 Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
I.S. EN 1010-1:2005 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
I.S. EN 12753:2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
I.S. EN 1776:2015 GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
VDE 0165-10 : 1999 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
VDI 2260:2003-10 Technical warranty for gas cleaning equipment - Particulate and gaseous matter
BIS IS/IEC 60079-18 : 2009 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
VDI 2263 Blatt 8.1:2011-03 Dust fires and dust explosions - Hazards - assessment - protective measures - Fire and explosion protection on elevators - Examples
VDI/VDE/DGQ/DKD 2622 Blatt 20:2013-12 Calibration of measuring equipment for electrical quantities - Direct-voltage measuring amplifiers
VDI 2263 Blatt 5.1:2014-10 Dust fires and dust explosions - Hazards, assessment, protective measures - Explosion protection in fluid bed dryers - Hints and examples of operation
VDI 2263 Blatt 6:2017-08 Dust fires and dust explosions - Hazards - assessment - protective measures - Dust fires and explosion protection in dust extracting installations
DIN EN 61779-1 : 2001 AMD 11 2004 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
VDI 2330 Blatt 1:2013-09 Screw conveyors for bulk materials - General characterisation
UNE-EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
CEI EN 50050-2 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
I.S. EN 15001-2:2008 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE
15/30277841 DC : 0 BS EN 62784 ED 1.0 - PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND DUST EXTRACTORS PROVIDING EQUIPMENT PROTECTION LEVEL DC FOR THE COLLECTION OF COMBUSTIBLE DUSTS
ISO/IEC 30129:2015 Information technology Telecommunications bonding networks for buildings and other structures
07/30174641 DC : DRAFT DEC 2007 BS EN 62305-3 - PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD
15/30320786 DC : 0 BS EN 13952 - LPG EQUIPMENT AND ACCESSORIES - FILLING PROCEDURES FOR LPG CYLINDERS
DIN EN ISO 15970 E : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
BS EN 50050-2:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder
PREN 1473 : DRAFT 2018 INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
PREN 13617-1 : DRAFT 2010 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
13/30271407 DC : DRAFT DEC 2013 BS ISO 16924 - NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES
BS IEC 61832:1999 Analyser systems. Guide to technical enquiry and bid evaluation
15/30296744 DC : 0 BS EN 12013 - PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BS EN ISO 16904:2016 Petroleum and natural gas industries. Design and testing of LNG marine transfer arms for conventional onshore terminals
PD IEC/TR 61831:2011 On-line analyser systems. Guide to design and installation
NF EN 15001-2 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE
15/30330032 DC : 0 BS ISO/IEC 80079-20-1 - EXPLOSIVE ATMOSPHERES - PART 20-1: MATERIAL CHARACTERISTICS FOR GAS AND VAPOUR CLASSIFICATION - TEST METHODS AND DATA
DIN EN 14677:2008-11 SAFETY OF MACHINERY - SECONDARY STEEL MAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
12/30260552 DC : 0 BS EN 50174-3:201X - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
BS EN 60079-10-2:2015 Explosive atmospheres Classification of areas. Explosive dust atmospheres
10/30219405 DC : 0 BS EN 13617-1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
14/30278882 DC : 0 BS EN 60079-7 IEC 60079-7 ED. 5.0 - EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
NF EN 62305-3 : 2012 PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD
14/30311363 DC : 0 PD IEC/TS 60079-39 ED1.0 - EXPLOSIVE ATMOSPHERES - PART 39: INTRINSICALLY SAFE SYSTEMS WITH ELECTRONICALLY CONTROLLED SPARK DURATION LIMITATION
BS EN 60079-17:2014 Explosive atmospheres Electrical installations inspection and maintenance
EN 1473:2016 Installation and equipment for liquefied natural gas - Design of onshore installations
CEI EN 60079-17 : 2015 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
I.S. EN 13616-2:2016 OVERFILL PREVENTION DEVICES FOR STATIC TANKS FOR LIQUID FUELS - PART 2: OVERFILL PREVENTION DEVICES WITHOUT A CLOSURE DEVICE
CEI EN 50050-1 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
BS EN 50050-3:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock
IEC TS 60079-27:2002 Electrical apparatus for explosive gas atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
UNE-EN 50176:2010 Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements
DIN EN 15268 E : 2008 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP ASSEMBLIES
ISO 12648:2006 Graphic technology Safety requirements for printing press systems
05/30128234 DC : DRAFT FEB 2005 EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
NF EN 62086-2 : 2006 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
02/204779 DC : DRAFT JULY 2002 IEC 61241-17 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
NF EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNE-EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
04/30112677 DC : 0 IEC 61779-1 ED.2 - ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
15/30290201 DC : 0 BS IEC 60092-101 ED 5.0 - ELECTRICAL INSTALLATIONS IN SHIPS - PART 101: DEFINITIONS AND GENERAL REQUIREMENTS
07/30152812 DC : DRAFT AUG 2007 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
PD CEN/TR 16787:2014 Industrial Gas Installation. Guideline
BS ISO 12648:2006 Graphic technology. Safety requirements for printing press systems
04/30110212 DC : DRAFT MAR 2004 ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS
BS IEC 60092-502:1999 Electrical installation in ships Tankers. Special features
BS EN 1012-3:2013 Compressors and vacuum pumps. Safety requirements Process compressors
EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
BS ISO 21789:2009 Gas turbine applications — Safety
CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
I.S. EN 60079-1:2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS EN 60079-0 : 2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
UNE-EN 60079-10-2:2016 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
BS ISO 15970 : 2008 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
I.S. EN 60079-10-1:2015 EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
PREN 12779 : DRAFT 2014 SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
ISO/TS 19880-1:2016 Gaseous hydrogen Fuelling stations Part 1: General requirements
IEC 60079-10-2:2015 RLV Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
IEC 60335-2-69:2016 RLV Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
NF EN 60079-30-2 : 2007 ELECTRICAL ATMOSPHERES - PART 2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
I.S. EN 61158-2:2014 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
I.S. EN 50050-2:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
I.S. EN 61241-17:2005 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 17: INSPECTION AND MAINTENANCE OF ELECTRICAL INSTALLATIONS IN HAZARDOUS AREAS (OTHER THAN MINES)
I.S. EN 50050-1:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS
I.S. EN 60079-29-2:2015 EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN
I.S. EN 62305-3:2011 PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD
NF EN 60079-25 : 2011 EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS
I.S. EN 60079-17:2014 EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
I.S. HD 60364-5-56:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES (IEC 60364-5-56:2009 (EQV))
ISO 16924:2016 Natural gas fuelling stations — LNG stations for fuelling vehicles
ISO/TS 20100:2008 Gaseous hydrogen Fuelling stations
UNI EN 15001-2 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 2: DETAILED FUNCTIONAL REQUIREMENTS FOR COMMISSIONING, OPERATION AND MAINTENANCE
CSA C22.2 No. 60079-7 : 2016 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
I.S. EN 50174-3:2013 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
UNE-EN 62305-3:2011 Protection against lightning -- Part 3: Physical damages to structures and life hazard
ISO 12649:2004 Graphic technology Safety requirements for binding and finishing systems and equipment
NORSOK I 001 : 2010 FIELD INSTRUMENTATION
BIS IS/IEC 60079-30-2 : 2007 EXPLOSIVE ATMOSPHERES - PART 30: ELECTRICAL RESISTANCE TRACE HEATING - SECTION 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
BS EN 61784-1:2014 Industrial communication networks. Profiles Fieldbus profiles
I.S. EN 50310:2016 TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
UNI EN 14678-3 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
PREN 50174-3 : DRAFT 2012 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
IEC TS 60079-46:2017 Explosive atmospheres - Part 46: Equipment assemblies
BS EN 1127-1:2019 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
IEC 60079-1 REDLINE : 7ED 2014 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
UNI EN 16299 : 2013 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
ISO 19372:2015 Microturbines applications — Safety
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
ISO 12643-1:2009 Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
IEC 60092-502:1999 Electrical installations in ships - Part 502: Tankers - Special features
ISO 21789:2009 Gas turbine applications — Safety
IEC 60335-2-69:2016 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
IEC 60079-18:2014 RLV Explosive atmospheres - Part 18: Equipment protection by encapsulation “m”
IEC 60079-26 REDLINE : 3ED 2014 EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
EEMUA 186 : 2016 A PRACTITIONER'S HANDBOOK FOR POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN EN 12312-5 E : 2009 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
DIN EN 12779:2016-03 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
IEEE 45.8-2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Cable Systems
DIN EN 13952:2015-09 (Draft) LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS
12/30261012 DC : 0 BS IEC 61892-6 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
IEC 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
12/30264905 DC : 0 BS EN 61158-2 - INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION
UNE-EN 1755:2016 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
BS EN 1010-1 : 2004 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
BS EN 1473:2016 Installation and equipment for liquefied natural gas. Design of onshore installations
BS EN 12312-5 : 2005 AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT
BS EN 12215 : 2004 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
ISO 16904:2016 Petroleum and natural gas industries Design and testing of LNG marine transfer arms for conventional onshore terminals
BS EN 12753 : 2005 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
IEC 61241-17:2005 Electrical apparatus for use in the presence of combustible dust - Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)
CSA C22.2 No. 60335-2-40 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
UNI EN 13617-1 : 2012 PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
UNI EN 14677 : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
EN 50281-1-2 : 98 AMD 1 2002 ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-2: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - SELECTION, INSTALLATION AND MAINTENANCE
UNI EN 1010-1 : 2011 SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS
UNI EN 12981 : 2009 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNI EN 1012-3 : 2014 COMPRESSORS AND VACUUM PUMPS - SAFETY REQUIREMENTS - PART 3: PROCESS COMPRESSORS
UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 12753 : 2010 THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS
UNI EN 13852-1 : 2013 CRANES - OFFSHORE CRANES - PART 1: GENERAL-PURPOSE OFFSHORE CRANES
CSA CE CODE SAFETY PACKAGE : 2012 CE CODE SAFETY PACKAGE
UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
CSA C22.2 No. 60079.1 : 2016 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
UNI EN 12215 : 2010 COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
EN 45510-2-9:2008 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
UNE-EN 50223:2016 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
DIN EN ISO/IEC 80079-38 E : 2017 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
BS EN 50176:2009 Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements
I.S. EN 60079-0:2012 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD))
C22.10-10 Québec Construction Code, Chapter V - Electricity Canadian Electrical Code, Part I (Twenty-first Edition) with Québec Amendments
IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
PREN 12013 : DRAFT 2015 PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
BS EN 60079-13:2017 Explosive atmospheres Equipment protection by pressurized room \'p\' and artificially ventilated room \'v\'
PREN 14678-1 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
PREN 50050-3 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
PREN 50050-2 : DRAFT 2011 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
12/30264885 DC : 0 BS EN 61784-1 - INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
04/30113665 DC : DRAFT MAY 2004 IEC 60079-19 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 19: REPAIR AND OVERHAUL FOR APPARATUS USED IN EXPLOSIVE ATMOSPHERES (OTHER THAN EXPLOSIVES)
08/30190505 DC : 0 BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
BIS IS/IEC 60079-1 : 2007 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
12/30268608 DC : 0 BS EN 60079-17/ED 5 - EXPLOSIVE ATMOSPHERES - PART 17: ELECTRICAL INSTALLATIONS INSPECTION AND MAINTENANCE
11/30248845 DC : 0 BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
04/30068318 DC : DRAFT APR 2004 IEC 62086-2 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
14/30292850 DC : 0 BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS
08/30191166 DC : DRAFT OCT 2008 BS EN 60079-25 - EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE SYSTEMS
UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
PD IEC/TS 60079-46:2017 Explosive atmospheres Equipment assemblies
BS EN 60079-20-1:2010 Explosive atmospheres Material characteristics for gas and vapour classification. Test methods and data
BS PD IEC/TS 62603-1 : 2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINES FOR PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
DIN EN 15268:2008-11 PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION OF SUBMERSIBLE PUMP
BS EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices with closure device
BS EN 60079-10-1:2015 Explosive atmospheres Classification of areas. Explosive gas atmospheres
09/30194936 DC : DRAFT JAN 2009 BS EN ISO 28460 - PETROLEUM AND NATURAL GAS INDUSTRIES - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - SHIP-TO-SHORE INTERFACE AND PORT OPERATIONS
HD 60364-5-56:2010/A12:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-56: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - SAFETY SERVICES
NF ISO 19859 : 2016 GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
06/30149534 DC : DRAFT APR 2006 IEC 60079-27 - EXPLOSIVE ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO)
UNE-EN 60079-25:2017 Explosive atmospheres -- Part 25: Intrinsically safe electrical systems
UNI EN 1127-1 : 2011 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 1: BASIC CONCEPTS AND METHODOLOGY
UNE-EN 16299:2013 Cathodic protection of external surfaces of above ground storage tank bases in contact with soil or foundations
ISO/IEC 80079-20-1:2017 Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification Test methods and data
ISA TR12.21.01 : 2004 USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS
I.S. HD 60364-5-54:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
I.S. EN ISO 16924:2018 NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES (ISO 16924:2016)
I.S. EN 61784-5-3:2013 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
CSA C22.2 No. 60079-18 : 2016 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS PD IEC TS 60079-32-1 : 2013 EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE
EN 50174-3:2013/A1:2017 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
I.S. EN 50174-2:2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
S.R. HD 60364-5-54:2011 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-54: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - EARTHING ARRANGEMENTS AND PROTECTIVE CONDUCTORS
I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
EN ISO 16924:2018 Natural gas fuelling stations - LNG stations for fuelling vehicles (ISO 16924:2016)
I.S. EN 61784-1:2014 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 1: FIELDBUS PROFILES
UNE-EN 50050-1:2014 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
IEC TS 62603-1:2014 Industrial process control systems - Guideline for evaluating process control systems - Part 1: Specifications
IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
NF EN 12954 : 2001 CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES
DIN EN 61158-2:2015-02 INDUSTRIAL COMMUNICATION NETWORKS - FIELDBUS SPECIFICATIONS - PART 2: PHYSICAL LAYER SPECIFICATION AND SERVICE DEFINITION (IEC 61158-2:2014)
DIN EN 13852-1:2014-01 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
BS EN 50628:2016 Erection of electrical installations in underground mines
09/30205182 DC : 0 BS EN 50310 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
97/204928 DC : DRAFT APR 1997 PREN 50273 - INSTALLATION OF ELECTRICAL APPARATUS IN AREAS ENDANGERED BY EXPLOSIVE SUBSTANCES
BS EN 61158-2:2014 Industrial communication networks. Fieldbus specifications Physical layer specification and service definition
UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
07/30169755 DC : 0 BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING
BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
IEC 60079-0:2017 RLV Explosive atmospheres - Part 0: Equipment - General requirements
IEC 60079-27:2008 Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)
IEC 60079-25:2010 Explosive atmospheres - Part 25: Intrinsically safe electrical systems
05/30133440 DC : DRAFT MAY 2005 EN 50310 ED 2 - APPLICATION OF EQUIPOTENTIAL BONDING AND EARTHING IN BUILDINGS WITH INFORMATION TECHNOLOGY EQUIPMENT
BS EN 60335-2-40 : 2003 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
UNE-EN 1776:2017 Gas infrastructure - Gas measuring systems - Functional requirements
BS EN 61784-5-3:2013 Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 3
BS EN 13617-1:2012 Petrol filling stations Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
BS EN 12954:2001 Cathodic protection of buried or immersed metallic structures. General principles and application for pipelines
UNE-EN 60079-0:2013 Explosive atmospheres - Part 0: Equipment - General requirements
17/30361391 DC : 0 BS EN 50174-2 - INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
12/30276304 DC : 0 BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
BS EN 12779:2015 Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements
BS EN 1776:2015 Gas infrastructure. Gas measuring systems. Functional requirements
BS ISO 19372:2015 Microturbines applications. Safety
11/30211394 DC : DRAFT MAR 2011 BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS
BS ISO 19859:2016 Gas turbine applications. Requirements for power generation
UNE-EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
IEC 60079-29-2:2015 RLV Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
05/30134569 DC : DRAFT JUN 2005 IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS
PD CLC/TR 60079-33:2015 Explosive atmospheres Equipment protection by special protection \'s\'
BS IEC 60079-33 : 2012 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
12/30218781 DC : DRAFT JAN 2012 BS EN 60335-2-40 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
BS EN 50310:2016 Telecommunications bonding networks for buildings and other structures
13/30271432 DC : 0 BS EN 60079-18 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
BS EN 14161 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
BS ISO/IEC 30129 : 2015 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES
UNE-EN 13852-1:2014 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
ISO 15970:2008 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor
EN 45510-2-9 : 2008 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-9: ELECTRICAL EQUIPMENT - CABLING SYSTEMS
DIN EN ISO 80079-36:2016-12 Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016)
ISA 60079-1 : 2005 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
EI Model code of safe practice Part 15:2015 MODEL CODE OF SAFE PRACTICE - PART 15: AREA CLASSIFICATION FOR INSTALLATIONS HANDLING FLAMMABLE FLUIDS
EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
EN 1755:2015 Industrial Trucks - Safety requirements and verification - Supplementary requirements for operation in potentially explosive atmospheres
EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN ISO 16923:2018 Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016)
EN 15001-2:2008 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
EN 15268:2008 Petrol filling stations - Safety requirements for the construction of submersible pump assemblies
EN 1776:2015 Gas infrastructure - Gas measuring systems - Functional requirements
EN ISO 16904:2016 Petroleum and natural gas industries - Design and testing of LNG marine transfer arms for conventional onshore terminals (ISO 16904:2016)
EN 13616-1:2016 Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill prevention devices with closure device
EN 14197-3:2004/A1:2005 CRYOGENIC VESSELS - STATIC NON-VACUUM INSULATED VESSELS - PART 3: OPERATIONAL REQUIREMENTS
EN 13952:2017 LPG equipment and accessories - Filling operations for LPG cylinders
EN 13852-1:2013 Cranes - Offshore cranes - Part 1: General-purpose offshore cranes
EN 14161:2011+A1:2015 Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified)
EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
EN 14677:2008 Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liquid steel
EN 13852-2:2004 Cranes - Offshore cranes - Part 2: Floating cranes
GOST R 52350.27 : 2005 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 27: FIELDBUS INTRINSICALLY SAFE CONCEPT (FISCO) AND FIELDBUS NON-INCENDIVE CONCEPT (FNICO)
BS EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels Overfill prevention devices without a closure device
UNE-EN 60079-30-2:2017 Explosive atmospheres - Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance
UNE-EN 50177:2010 Stationary electrostatic application equipment for ignitable coating powders - Safety requirements
02/205211 DC : DRAFT JULY 2002 IEC 61241-14 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION
BS EN 60079-25:2010 Explosive atmospheres Intrinsically safe electrical systems
BS IEC 61831:1999 On-line analyser systems. Guide to design and installation
03/301332 DC : DRAFT JAN 2003 ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT
BS EN 50050-1:2013 Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials
CEI EN 50050-3 : 2014 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
BS IEC 62086-2 : 2001 AMD 16068 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - ELECTRICAL RESISTANCE TRACE HEATING - PART 2: APPLICATION GUIDE FOR DESIGN, INSTALLATION AND MAINTENANCE
10/30187796 DC : DRAFT DEC 2010 BS EN 14161 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS
14/30267617 DC : 0 IEC 60079-10-1 ED 2.0 - EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
15/30324828 DC BS EN 62305-3. Protection against lightning. Part 3. Physical damage to structures and life hazard
S.R. CLC/TS 62603-1:2014 INDUSTRIAL PROCESS CONTROL SYSTEMS - GUIDELINE FOR EVALUATING PROCESS CONTROL SYSTEMS - PART 1: SPECIFICATIONS
PD IEC/TS 60079-39:2015 Explosive atmospheres Intrinsically safe systems with electronically controlled spark duration limitation
BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
BS ISO 16923 : 2016 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES
BIS IS/ISO 12643-1 : 2009 GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS
UNE-EN 13616-2:2016 Overfill prevention devices for static tanks for liquid fuels - Part 2: Overfill prevention devices without a closure device
IEC 60309-3:1994 Plugs, socket-outlets and couplers for industrial purposes - Part 3: Particular requirements for plugs, socket-outlets, connectors and appliance inlets for use in explosive gas atmospheres
UNE-EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
S.R. CLC/TR 60079-33:2015 EXPLOSIVE ATMOSPHERES - PART 33: EQUIPMENT PROTECTION BY SPECIAL PROTECTION 'S'
07/30169774 DC : 0 BS EN 60364-5-53 - LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-53: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - PROTECTION, ISOLATION, SWITCHING, CONTROL AND MONITORING
08/30186475 DC : 0 BS EN 13617-1 AMD1 - PETROL FILLING STATIONS - PART 1: SAFETY REQUIREMENTS FOR CONSTRUCTION AND PERFORMANCE OF METERING PUMPS, DISPENSERS AND REMOTE PUMPING UNITS
05/30135286 DC : 0 EN 15268 - PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND PERFORMANCE OF SUBMERSIBLE PUMP ASSEMBLIES
14/30297213 DC : 0 BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS
11/30247086 DC : 0 BS EN 60079-1 ED. 7.0 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
BS ISO 12649:2004 Graphic technology. Safety requirements for binding and finishing systems and equipment
BS EN ISO 16923:2018 Natural gas fuelling stations. CNG stations for fuelling vehicles
PD IEC/TS 60079-43:2017 Explosive atmospheres Equipment in adverse service conditions
14/30267605 DC : 0 BS EN 60079-30-2 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-2: ELECTRICAL RESISTANCE TRACE HEATING - APPLICATION GUIDE FOR DESIGN; INSTALLATION AND MAINTENANCE
IEC TS 60079-39:2015 Explosive atmospheres - Part 39: Intrinsically safe systems with electronically controlled spark duration limitation
I.S. EN 50628:2016 ERECTION OF ELECTRICAL INSTALLATIONS IN UNDERGROUND MINES
CEI EN 61784-5-3 : 2014 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
BS EN 61779-1:2000 Electrical apparatus for the detection and measurement of flammable gases General requirements and test methods
BIS IS/IEC 60079-7 : 2006 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY 'E'
DIN EN 14677 E : 2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNI EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
I.S. EN 14678-3:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
I.S. EN 60079-10-2:2015 EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
I.S. EN 50050-3:2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK
UNE-EN 60079-29-2:2016 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
I.S. EN ISO 16904:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND TESTING OF LNG MARINE TRANSFER ARMS FOR CONVENTIONAL ONSHORE TERMINALS (ISO 16904:2016)
I.S. EN 60079-26:2015 EXPLOSIVE ATMOSPHERES - PART 26: EQUIPMENT WITH EQUIPMENT PROTECTION LEVEL (EPL) GA
I.S. EN ISO 16923:2018 NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016)
EN 60079-18:2015/A1:2017 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M' (IEC 60079-18:2014/A1:2017)
PREN 1127-2 : DRAFT 2012 EXPLOSIVE ATMOSPHERES - EXPLOSION PREVENTION AND PROTECTION - PART 2: BASIC CONCEPTS AND METHODOLOGY FOR MINING
I.S. EN 14677:2008 SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL
UNE-EN 60079-20-1:2014 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
IEC 60092-101:1994+AMD1:1995 CSV Electrical installations in ships - Part 101: Definitions and general requirements
BS EN 50174-3 : 2013 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 3: INSTALLATION PLANNING AND PRACTICES OUTSIDE BUILDINGS
UNE-EN 60079-19:2011 Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation
IEC 60364-4-42:2010+AMD1:2014 CSV Low-voltage electrical installations - Part 4-42: Protection forsafety - Protection against thermal effects
I.S. EN 60079-18:2015 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
BS EN 1127-1:2011 Explosive atmospheres. Explosion prevention and protection Basic concepts and methodology
UNE-EN 60079-7:2016 Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
CLC/TR 60079-32-1:2015 Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance
IEC 60364-5-56:2009 Low-voltage electrical installations - Part 5-56: Selection and erection of electrical equipment - Safety services
EN 13617-1:2012 Petrol filling stations - Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
IEC 60079-18 : 2014 REDLINE EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION 'M'
IEC 60079-0 REDLINE : 7.0 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
ISO 5149-2:2014 Refrigerating systems and heat pumps — Safety and environmental requirements — Part 2: Design, construction, testing, marking and documentation
IEC 60079-10-2 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES
IEC 60079-10-1 REDLINE : 2ED 2015 EXPLOSIVE ATMOSPHERES - PART 10-1: CLASSIFICATION OF AREAS - EXPLOSIVE GAS ATMOSPHERES
I.S. EN 50223:2015 STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS
I.S. EN 60079-13:2017 EXPLOSIVE ATMOSPHERES - PART 13: EQUIPMENT PROTECTION BY PRESSURIZED ROOM 'P' AND ARTIFICIALLY VENTILATED ROOM 'V'
EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
BS ISO 22734-1:2008 Hydrogen generators using water electrolysis process Industrial and commercial applications
BS EN 13852-2:2004 Cranes. Offshore cranes Floating cranes
BS ISO 5149-2:2014 Refrigerating systems and heat pumps. Safety and environmental requirements Design, construction, testing, marking and documentation
IEC 61784-1:2014 Industrial communication networks - Profiles - Part 1: Fieldbus profiles
C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
UNE-EN 12779:2016 Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements
BS EN 50174-2 : 2009 INFORMATION TECHNOLOGY - CABLING INSTALLATION - PART 2: INSTALLATION PLANNING AND PRACTICES INSIDE BUILDINGS
BS EN 13952:2017 LPG equipment and accessories. Filling operations for LPG cylinders
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
13/30286778 DC : 0 BS EN 60079-1 - EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D'
BS EN 45510-2-9:2008 Guide for procurement of power station equipment Electrical equipment. Cabling systems
BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
DD ISO/TS 20100:2008 Gaseous hydrogen. Fuelling stations
11/30258071 DC : 0 BS EN 61918 - INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
BS IEC 61892-7:2014 Mobile and fixed offshore units. Electrical installations Hazardous areas
BS EN 13852-1:2013 Cranes. Offshore cranes General-purpose offshore cranes
EN 1012-3:2013 Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors
EN 60079-0:2012/A11:2013 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED)
EN 12981:2005+A1:2009 Coating plants - Spray booths for application of organic powder coating material - Safety requirements
UNE-ISO 22734-1:2012 Hydrogen generators using water electrolysis process. Part 1: Industrial and commercial applications
EN 60079-17:2014 Explosive atmospheres - Part 17: Electrical installations inspection and maintenance
EN 61779-1 : 2000 AMD 11 2004 ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
EN 1127-1:2011 Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
DIN EN 13952:2017-09 LPG EQUIPMENT AND ACCESSORIES - FILLING OPERATIONS FOR LPG CYLINDERS
EN 60079-1:2014 Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
EN 50628:2016 Erection of electrical installations in underground mines
DIN EN 16299:2013-06 CATHODIC PROTECTION OF EXTERNAL SURFACES OF ABOVE GROUND STORAGE TANK BASES IN CONTACT WITH SOIL OR FOUNDATIONS
EN 60079-29-2:2015 Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
DIN EN 15001-2:2010-04 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
EN 62305-3:2011 Protection against lightning - Part 3: Physical damage to structures and life hazard
EN 50050-2 : 2013 ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER
EN 60079-10-2:2015 Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres
EN 50050-1:2013 Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials
EN 60079-20-1:2010 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data
EN 60335-2-40:2003/A13:2012/AC:2013 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS
EN 50223:2015 Stationary electrostatic application equipment for ignitable flock material - Safety requirements
I.S. EN 60335-2-40:2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS (IEC 60335-2-40:2002 (MOD))
UNE-HD 60364-4-42:2014 Low voltage electrical installations -- Part 4-42: Protection for safety - Protection against thermal effects
UNE-HD 60364-5-54:2015 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors

AS/NZS 80079.20.1:2019 Explosive atmospheres Material characteristics for gas and vapour classification - Test methods and data (ISO/IEC 80079-20-1:2017, (ED. 1.0)/COR1:2018, MOD)

View more information
US$464.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.