IEC 60301:2012
Current
Current
The latest, up-to-date edition.
Preferred diameters of wire terminations of capacitors and resistors
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
07-13-2012
Publisher
FOREWORD
1 Scope
2 Preferred diameters of wire terminations
Annex A (informative) - Imperial wire dimensions
IEC 60301:2012 gives a series of preferred diameters of the finished wire terminations of capacitors and resistors for use in electronic equipment. This third edition cancels and replaces the second edition, published in 1971, and its Amendment 1, published in 1972, and constitutes a technical revision. The main technical changes with respect to the second edition are the following:
- employment of SI units only in the normative part of this standard, causing transfer of all imperial dimensions from Table 1 to the informative Annex A,
- addition of two smaller diameters of wire terminations in Table 1, and
- tightening of the tolerance ranges defined by minimum and maximum diameters in Table 1.
| DevelopmentNote |
Stability Date: 2027. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60301 : 2013 | Identical |
| NBN EN 60301 : 2012 | Identical |
| NEN EN IEC 60301 : 2012 | Identical |
| PN EN 60301 : 2013 | Identical |
| BS EN 60301:2012 | Identical |
| UNE-EN 60301:2012 | Identical |
| CEI EN 60301 : 2013 | Identical |
| EN 60301:2012 | Identical |
| DIN EN 60301:2013-05 | Identical |
| DIN IEC 60301:1985-12 | Identical |
| UNE 20532:1973 | Identical |
| NEN 10301 : 1973 | Identical |
| 14/30311384 DC : 0 | BS EN 60115-2:2014+A1 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS |
| 13/30279399 DC : 0 | BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
| BS EN 140101:2008 | Blank Detail Specification. Fixed low power film resistors |
| CEI EN 60717 : 2013 | METHOD FOR THE DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS |
| EN 140101:2008 | Blank Detail Specification: Fixed low power film resistors |
| EN 60286-2:2015 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
| EN 60115-2:2015 | Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors |
| IEC 60115-2:2014 | Fixed resistors for use in electronic equipment - Part 2: Sectional specification: Leaded fixed low power film resistors |
| 09/30207307 DC : 0 | BS EN 60115-2 - FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED LOW-POWER NON-WIREWOUND RESISTORS |
| BS 6062-2:1988 | Packaging of electronic components for automatic handling Specification for tape packaging of components with unidirectional leads on continuous tapes |
| EN 60286-1:2017 | Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes |
| IEC 60286-1:2017 | Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes |
| I.S. EN 140100:2008 | SECTIONAL SPECIFICATION: FIXED LOW POWER FILM RESISTORS |
| I.S. EN 60286-1:2017 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES |
| BS EN 60286-2:2015 | Packaging of components for automatic handling Packaging of components with unidirectional leads on continuous tapes |
| I.S. EN 60294:2012 | MEASUREMENT OF THE DIMENSIONS OF A CYLINDRICAL COMPONENT WITH AXIAL TERMINATIONS (IEC 60294:2012 (EQV)) |
| BS EN 60115-2:2015 | Fixed resistors for use in electronic equipment Sectional specification: Leaded fixed low power film resistors |
| BS EN 60294:2012 | Measurement of the dimensions of a cylindrical component with axial terminations |
| BS EN 60286-1:2017 | Packaging of components for automatic handling Tape packaging of components with axial leads on continuous tapes |
| I.S. EN 60115-2:2015 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS |
| 06/30155922 DC : 0 | BS EN 140100 - SECTIONAL SPECIFICATION - FIXED LOW POWER FILM RESISTORS |
| BS CECC 30201 001:1981 | Harmonized detail specification for fixed tantalum capacitors. Porous anode, solid electrolyte. Cylindrical insulated/non-insulated metallic case, polar/hermetic seal, axial terminations. Basic plus additional assessment level |
| BS EN 60717:2012 | Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
| I.S. EN 140101:2008 | BLANK DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS |
| I.S. EN 140101-806:2009 | DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS |
| IEC 60286-2:2015 | Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes |
| BS EN 140100:2008 | Sectional specification. Fixed low power film resistors |
| I.S. EN 60286-2:2015 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
| CEI EN 60286-2 : 2016 | PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
| CEI EN 60294 : 2013 | MEASUREMENT OF THE DIMENSIONS OF A CYLINDRICAL COMPONENT WITH AXIAL TERMINATIONS |
| IEC 60294:2012 | Measurement of the dimensions of a cylindrical component with axial terminations |
| IEC 60717:2012 | Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
| 10/30235870 DC : 0 | BS EN 60717:1981/AMD1 - METHOD FOR DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS |
| CEI EN 60115-2 : 2016 | FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: LEADED FIXED LOW POWER FILM RESISTORS |
| 16/30350953 DC : 0 | BS EN 60286-1 ED 3.0 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 1: TAPE PACKAGING OF COMPONENTS WITH AXIAL LEADS ON CONTINUOUS TAPES |
| I.S. EN 60717:2012 | METHOD FOR THE DETERMINATION OF THE SPACE REQUIRED BY CAPACITORS AND RESISTORS WITH UNIDIRECTIONAL TERMINATIONS (IEC 60717:2012 (EQV)) |
| 06/30156414 DC : DRAFT SEP 2006 | BS EN 60286-2 - PACKAGING OF COMPONENTS FOR AUTOMATIC HANDLING - PART 2: TAPE PACKAGING OF COMPONENTS WITH UNIDIRECTIONAL LEADS ON CONTINUOUS TAPES |
| 10/30235862 DC : 0 | BS EN 60294:1969/AMD1 - MEASUREMENT OF THE DIMENSIONS OF A CYLINDRICAL COMPONENT HAVING TWO AXIAL TERMINATIONS |
| BS EN 140101-806 : 2008 | DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS |
| EN 140101-806 : 2008 COR 2014 | DETAIL SPECIFICATION: FIXED LOW POWER FILM RESISTORS - METAL FILM RESISTORS ON HIGH GRADE CERAMIC, CONFORMAL COATED OR MOLDED, AXIAL OR PREFORMED LEADS |
| EN 60717:2012 | Method for the determination of the space required by capacitors and resistors with unidirectional terminations |
| EN 60294:2012 | Measurement of the dimensions of a cylindrical component with axial terminations |
| EN 140100:2008 | Sectional Specification: Fixed low power film resistors |
US$23.00
Excluding Tax where applicable
USD
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English - French
PDF - English - French
PDF 3 Users - English - French
PDF 5 Users - English - French
PDF 9 Users - English - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.