• There are no items in your cart

IEC 60381-2:1978

Current
Current

The latest, up-to-date edition.

Analogue signals for process control systems. Part 2: Direct voltage signals
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, Russian

Published date

01-01-1978

FOREWORD
PREFACE
1 Scope
2 Definitions
3 Specified values

Applicable to analogue direct voltage signals used in industrial process measurement and control systems. lt specifies ranges of analogue direct voltage signals and the signal common; it also deals with ripple content. The analogue direct voltage signal, unlike the analogue direct current signal specified in IEC 60381-1, is not intended for transmission over long distances. This standard does not apply to signals used entirely within an element.

DevelopmentNote
Also numbered as BS 5863-2(1980) (08/2005) Stability Date: 2018. (10/2012)
DocumentType
Standard
Pages
9
PublisherName
International Electrotechnical Committee
Status
Current

Standards Relationship
UNE 20800-2:1986 Identical
DIN IEC 60381-2:1980-06 Identical
CEI 65-1 : 1998 Identical
NEN 10381-2 : 1985 Identical

13/30287730 DC : 0 BS EN 62828 ED 1.0 - REFERENCE CONDITIONS AND PROCEDURES FOR INDUSTRIAL MEASUREMENT TRANSMITTERS - PART 1: GENERAL PROCEDURES FOR ALL TYPES OF TRANSMITTERS
16/30333424 DC : 0 BS ISO 12764 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL
CEI EN 60770-2 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
15/30324519 DC : 0 BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
BS EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
IEC 61000-4-16:2015 RLV Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 60947-5-7:2003 Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements Requirements for proximity devices with analogue output
I.S. EN 62703:2013 EXPRESSION OF PERFORMANCE OF FLUOROMETRIC OXYGEN ANALYZERS IN LIQUID MEDIA (IEC 62703:2013 (EQV))
I.S. EN ISO 15970:2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
I.S. EN 60546-2:2010 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
IEC 60873:1986 Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
EN 60770-1:2011 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
EN 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
BS EN 60873:1993 Methods of evaluating the performance of electrical and pneumatic analogue chart recorders for use in industrial-process control systems
BS EN ISO 15970:2014 Natural gas. Measurement of properties. Volumetric properties: density, pressure, temperature and compression factor
DIN EN 60546-2:2011-04 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
DIN EN ISO 15970:2014-09 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
06/30160085 DC : 0 BS ISO 15970 - NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
CEI EN 60546-2 : 2013 CONTROLLERS WITH ANALOGUE SIGNALS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: GUIDANCE FOR INSPECTION AND ROUTINE TESTING
BS EN 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems Guidance for inspection and routine testing
CAN/CSA-IEC 61000-4-16:17 Electromagnetic compatibility (EMC) — Part 4-16: Testing and measurement techniques — Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (Adopted IEC 61000-4-16:2015, second edition, 2015-12) | Compatibilité électromagnétique (CEM) — Partie 4-16 : Techniques d’essai et de mesure — Essai d’immunité aux perturbations conduites en mode commun dans la plage de fréquences de 0 Hz à 150 kHz (norme IEC 61000-4-16:2015 adoptée, deuxième édition, 2015:12)
I.S. EN 61115:1994 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
BS ISO 14511:2001 Measurement of fluid flow in closed conduits. Thermal mass flowmeters
ISO 20456:2017 Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids
IEC 61000-4-16 : 2.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
IEC 61000-4-16:2015 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
BS EN 61000-4-16:2016 Electromagnetic compatibility (EMC) Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
DIN EN ISO 15970 E : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR (ISO 15970:2008)
BS ISO 12764:2017 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
BS ISO TR 12764:1997 Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
08/30176950 DC : DRAFT JAN 2008 BS EN 60770-2 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
UNE-EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
ISO 12764:2017 Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
CEI EN 60770-1 : 2014 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
CEI EN 60947-5-7 : 2005 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT
API 551 : 2016 PROCESS MEASUREMENT
DIN EN ISO 6817:1995-11 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS; METHODS USING ELECTROMAGNETIC FLOW-METERS
ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
I.S. EN ISO 6817:1996 MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CIRCUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS
08/30176946 DC : DRAFT JAN 2008 BS EN 60770-1 - TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
02/208756 DC : 0 IEC 61115, ED. 2 - EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
UNE-EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
BS EN 60770-1:1999 Transmitters for use in industrial-process control systems Methods for performance evaluation
BS ISO 14224:1999 Petroleum and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
BS ISO 15970 : 2008 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
CSA CEI/IEC 61000.4.16 : 2002 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
IEC 60947-5-7:2003 Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
IEC 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
IEC 60770-1:2010 Transmitters for use in industrial-process control systems - Part 1: Methods for performance evaluation
IEC 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
ISO 15970:2008 Natural gas Measurement of properties Volumetric properties: density, pressure, temperature and compression factor
EN ISO 6817:1995 Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992)
EN ISO 15970:2014 Natural gas - Measurement of properties - Volumetric properties: density, pressure, temperature and compression factor (ISO 15970:2008)
BS EN 60770-2:2010 Transmitters for use in industrial-process control systems Methods for inspection and routine testing
CEI EN 61115 : 1998 EXPRESSION OF PERFORMANCE OF SAMPLE HANDLING SYSTEMS FOR PROCESS ANALYZERS
I.S. EN 60770-1:2011 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 1: METHODS FOR PERFORMANCE EVALUATION
ISA 50.1 : 1982 COMPATIBILITY OF ANALOG SIGNALS FOR ELECTRONIC INDUSTRIAL PROCESS INSTRUMENTS
I.S. EN 60947-5-7:2003 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-7: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - REQUIREMENTS FOR PROXIMITY DEVICES WITH ANALOGUE OUTPUT
ISO/TR 12764:1997 Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
UNI EN ISO 15970 : 2014 NATURAL GAS - MEASUREMENT OF PROPERTIES - VOLUMETRIC PROPERTIES: DENSITY, PRESSURE, TEMPERATURE AND COMPRESSION FACTOR
API 689 : 2007 COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT
I.S. EN 60770-2:2010 TRANSMITTERS FOR USE IN INDUSTRIAL-PROCESS CONTROL SYSTEMS - PART 2: METHODS FOR INSPECTION AND ROUTINE TESTING
I.S. EN 61000-4-16:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-16: TESTING AND MEASUREMENT TECHNIQUES - TEST FOR IMMUNITY TO CONDUCTED, COMMON MODE DISTURBANCES IN THE FREQUENCY RANGE 0 HZ TO 150 KHZ
ISO 14511:2001 Measurement of fluid flow in closed conduits Thermal mass flowmeters
ISO 6817:1992 Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters
IEC 60546-2:2010 Controllers with analogue signals for use in industrial-process control systems - Part 2: Guidance for inspection and routine testing
BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
EN 60947-5-7:2003 Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
EN 62703:2013 Expression of performance of fluorometric oxygen analyzers in liquid media
EN 60770-2:2010 Transmitters for use in industrial-process control systems - Part 2: Methods for inspection and routine testing
EN 61000-4-16:2016 Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz
EN 61115:1993 Expression of performance of sample handling systems for process analyzers
BS 4671(1987) : AMD 7870 METHODS FOR EVALUATING THE PERFORMANCE OF ELECTRICAL AND PNEUMATIC ANALOGUE CHART RECORDERS FOR USE IN INDUSTRIAL PROCESS CONTROL SYSTEMS

View more information
US$23.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.