IEC 60502:1994
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
12-01-1997
English - French
08-30-1994
Foreword
Section 1 - General
Clause
1 Scope
2 Definitions
Section 2 - Construction
3 Conductors
4 Insulation
5 Screening of ores
6 Assembly of cores, inner coverings and fillers
7 Metallic layers for single-core and multicore cables
8 Metallic screen
9 Concentric conductor
10 Metallic sheath
11 Metallic armour
Tables 1 to 4
Section 3 - Test requirements
13 Test conditions
14 Routine tests
15 Special tests
16 Type tests, electrical
17 Type tests, non-electrical
18 Electrical test after installation
Tables 5 to 12
Annexes
A The fictitious calculation method for determination of
dimensions of protective coverings
B Rounding of numbers
Specifies the construction, dimensions and test requirements of power cables with extruded solid insulation of the types listed in 1.2, for rated voltages (u) from 1 kV up to and including 30 kV given in 1.3, for fixed installations. Cables for special conditions of installations and service are not included.
DocumentType |
Standard
|
Pages |
109
|
PublisherName |
International Electrotechnical Committee
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
VDE 0472-505 : 1983 | Identical |
NEN 3620 : 2003 C1 2003 | Identical |
SANS 6282-1 : 2ED 2007(R2013) | Identical |
VDE 0272 : 1989 | Identical |
VDE 0273 : 1987 | Identical |
DIN VDE 0472-505 : 1983 | Identical |
NBN IEC 502 : 1994 | Identical |
BS 6622:1985 | Similar to |
ESI 43-13 : ISSUE 2 | AERIAL BUNDLED CONDUCTORS (ABC) INSULATED WITH CROSS LINKED POLYETHYLENE FOR LOW VOLTAGE OVERHEAD DISTRIBUTION |
NF EN 60684-3-282 : 2010 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 282: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, STRESS CONTROL |
BS EN 45510-2-8:2004 | Guide for procurement of power station equipment Electrical equipment - Power cables |
CEI UNI EN 45510-2-8 : 2006 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
PREN ISO 12696 : DRAFT 2009 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
I.S. HD 622:1999 | POWER CABLES HAVING RATED VOLTAGES FROM 3,6/6(7,2) KV UP TO AND INCLUDING 20,8/36(42) KV WITH SPECIAL FIRE PERFORMANCE FOR USE IN POWER STATIONS |
IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
HD 603 S1:1994/A3:2007 | DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
EN 45510-2-8 : 2004 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
EN 60719:1993 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
ENA TS 09-17 : ISSUE 2 AMD 1 1995 | SINGLE CORE CABLES FOR USE IN SUBSTATIONS HAVING EXTRUDED INSULATION AND RATED VOLTAGES OF 6350/11000 VOLTS AND 19000/33000 VOLTS |
ENA TS 09-13 : ISSUE 1 AMD 1 1993 | PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPES CABLES UP TO AND INCLUDING 33000 VOLTS |
API RP 17I : 1996 | INSTALLATION GUIDELINES FOR SUBSEA UMBILICALS |
I.S. EN 12696:2000 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
NF EN 60684-3-281 : 2010 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATION FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 281: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, SEMICONDUCTIVE |
98/232755 DC : DRAFT DEC 1998 | IEC 61936-1 - POWER INSTALLATIONS EXCEEDING 1 KV A.C. - PART 1: COMMON RULES |
IEEE C37.63-2013 REDLINE | IEEE Standard Requirements for Overhead, Pad-Mounted, Dry-Vault, and Submersible Automatic Line Sectionalizers for Alternating Current Systems Up to 38 kV |
HD 627 S1:1996/A2:2005 | MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND |
I.S. HD 627:2003 | MULTICORE AND MULTIPAIR CABLES FOR INSTALLATION ABOVE AND BELOW GROUND |
ISO 19859:2016 | Gas turbine applications Requirements for power generation |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
VDE 0299-2 : 1994 | CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
VDE 0278-623 : 97 AMD 1 2004 | POWER CABLE ACCESSORIES WITH RATED VOLTAGES U UP TO 30 KV (U[M] UP TO 36 KV) - PART 623: SPECIFICATION FOR JOINTS, STOP ENDS AND OUTDOOR TERMINATIONS FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
BS 5467:1977 | Specification for armoured cables with thermosetting insulation for electricity supply |
BS 6622:1991 | Specification for cables with extruded cross-linked polyethylene or ethylene propylene rubber insulation for rated voltages from 3800/6600 V up to 19000/33000 V |
BS 6883:1991 | Specification for elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units |
BS 5467:1989 | Specification for cables with thermosetting insulation for electricity supply for rated voltages of up to and including 600/1000 V and up to and including 1900/3300 V |
DIN EN 60719 : 1994 | CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
09/30185957 DC : 0 | BS EN ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
BS 6349-3:1988 | Maritime structures Design of dry docks, locks, slipways and shipbuilding berths, shiplifts and dock and lock gates |
08/30184557 DC : DRAFT JUNE 2008 | BS EN 62271-111 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 111: PAD-MOUNTED, DRY VAULT, AND SUBMERSIBLE AUTOMATIC CIRCUIT RECLOSERS AND FAULT INTERRUPTERS FOR ALTERNATING CURRENT SYSTEMS UP TO 38 KV |
BS EN 60719:1993 | Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
05/30128234 DC : DRAFT FEB 2005 | EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
NF EN 60684-3-280 : 2010 AMD 1 2014 | FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 280: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, ANTI-TRACKING |
CEI 20-60 : 1999 | POWER CABLES HAVING RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO INCLUDING 20,8/36 (42) KV |
I.S. HD 603:2007 | DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1 KV |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
BS 6899:1984 | Specification for rubber insulation and sheath of electric cables |
BS 6899:1991 | Specification for rubber insulation and sheath of electric cables |
BS 7870-2:1999 | LV and MV polymeric insulated cables for use by distribution and generation utilities Methods of test |
EN 45510-2-8:2004 | Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables |
ENA TS 09-20 : ISSUE 1 AMD 1 1993 | SINGLE CORE CABLES HAVING CROSS LINKED POLYETHYLENE INSULATION AND LEAD SHEATH FOR RATED VOLTAGE 19000/33000 VOLTS (UM = 36000 VOLTS) |
NFC 33 051 : 96 AMD 1 1998 XP | INSULATED CABLES AND THEIR ACCESSORIES FOR POWER SYSTEMS - SCREENED SEPARABLE CONNECTORS AND ASSOCIATED DEVICES FOR RATED VOLTAGES FROM 6/10 (12) KV UP TO 18/30 (36) KV |
ESI 09-20 : ISSUE 1 AMD 1 | SINGLE CORE CABLES HAVING CROSS LINKED POLYETHYLENE INSULATION AND LEAD SHEATH FOR RATED VOLTAGE 19000/33000 VOLTS (UM = 36000 VOLTS) |
ESI 09-16 : ISSUE 1 | TESTING SPECIFICATION FOR METALLIC SHEATHED POWER CABLES WITH EXTRUDED CROSS LINKED POLYETHYLENE INSULATION AND ACCESSORIES FOR SYSTEM VOLTAGES OF 66kV AND 132kV |
BS 7769-1.1:1997 | Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses General |
ESI 09-13 : ISSUE 1 | PERFORMANCE SPECIFICATION FOR HIGH VOLTAGE HEAT SHRINKABLE COMPONENTS FOR USE WITH HIGH VOLTAGE SOLID TYPE CABLES UP TO AND INCLUDING 33000 VOLTS |
IEEE 1246-2011 REDLINE | IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
BS EN 12696:2000 | Cathodic protection of steel in concrete |
IEC 60719:1992 | Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V |
BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
I.S. EN 45510-2-8:2004 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
95/215891 DC : DRAFT DEC 1995 | PREN 50213 - PRIMARY CABLES FOR AIRPORT LIGHTING |
ESI 09-17 : ISSUE 2 | SINGLE CORE CABLES FOR USE IN SUBSTATIONS HAVING EXTRUDED INSULATION AND RATED VOLTAGES OF 6350/11000 VOLTS AND 19000/33000 VOLTS |
09/19987837 DC : 0 | BS IEC 60364-7-713 ED2 - ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-713: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - FURNITURE |
HD 623 : S1 AMD 11 2001 | SPECIFICATION FOR JOINTS, STOP ENDS AND OUTDOOR TERMINATIONS FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1,0 KV |
05/30138201 DC : DRAFT AUG 2005 | ISO 12696 - CATHODIC PROTECTION OF STEEL IN CONCRETE |
CEI EN 60719 : 1997 | CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V |
I.S. 201-13:2001 | POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 13: OIL RESISTANT PVC SHEATHED CABLES WITH TWO OR MORE CONDUCTORS |
IEEE 1511.1 : 2010 | GUIDE FOR INVESTIGATING AND ANALYZING SHIELDED POWER CABLE FAILURES ON SYSTEMS RATED 5 KV THROUGH 46 KV |
BS 5468:1977 | Specification for cross-linked polyethylene insulation of electric cables |
UNI CEI EN 45510-2-8 : 2011 | GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 2-8: ELECTRICAL EQUIPMENT - POWER CABLES |
CEI 20-56 : 2010 | DISTRIBUTION CABLES WITH EXTRUDED INSULATION FOR RATED VOLTAGES FROM 3,6/6 (7,2) KV UP TO AND INCLUDING 20,8/36 (42) KV SOMMARIO |
I.S. HD 623:1999 | SPECIFICATION FOR JOINTS, STOP ENDS AND OUTDOOR TERMINATIONS FOR DISTRIBUTION CABLES OF RATED VOLTAGE 0,6/1,0 KV |
HD 622 S1:1996/A2:2005 | Power cables having rated voltages from 3,6/6 (7,2) kV up to and including 20,8/36 (42) kV with special fire performance for use in power stations |
14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
EN 12696 : 2000 | CATHODIC PROTECTION OF STEEL IN CONCRETE |
EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
IEC 60038:2009 | IEC standard voltages |
IEC 60228:2004 | Conductors of insulated cables |
IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
IEC 60230:1966 | Impulse tests on cables and their accessories |
IEC 60183:2015 | Guidance for the selection of high-voltage A.C. cable systems |
IEC 60885-2:1987 | Electrical test methods for electric cables. Part 2: Partial discharge tests |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.