• There are no items in your cart

IEC 60793-2-10:2017

Superseded
Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by
superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

12-31-2021

Language(s)

English - French

Published date

08-10-2017

FOREWORD
1 Scope
2 Normative references
3 Terms, definitions
4 Abbreviated terms
5 Specifications
Annex A (normative) - Specifications for sub-category
        A1a multimode fibres
Annex B (normative) - Specifications for sub-category
        A1b multimode fibres
Annex C (normative) - Specifications for sub-category
        A1d multimode fibres
Annex D (normative) - Fibre differential mode delay
        (DMD), calculated effective modal bandwidth
        (EMB[c]) and calculated overfilled modal bandwidth
        (OMB[c]) requirements
Annex E (informative) - System, modal bandwidth, and
        transmitter considerations
Annex F (informative) - Bandwidth nomenclature
        explanation
Annex G (informative) - Preliminary indications for
        items needing further study
Annex H (informative) - Applications and cabling
        categories supported by A1 fibres
Annex I (informative) - 1-Gigabit, 10-Gigabit, 25-Gigabit,
        40-Gigabit and 100-Gigabit Ethernet applications
Bibliography

IEC 60793-2-10:2017 is applicable to optical fibre sub-categories A1a, A1b, and A1d. These fibres are used or can be incorporated in information transmission equipment and optical fibre cables. Sub-category A1a applies to 50/125 mm graded index fibre. Four bandwidth grades are defined as models A1a.1, A1a.2, A1a.3 and A1a.4. Each of these bandwidth grades is defined for two levels of macrobend loss performance that are distinguished by "a" or "b" suffix. Those models with suffix "a" are specified to meet traditional macrobend loss performance levels. Those models with suffix "b" are specified to meet enhanced macrobend loss (i.e. lower loss) performance levels. Model A1a.4 supports single wavelength or multi-wavelength transmission systems in the vicinity of 850 nm to 950 nm. Sub-category A1b applies to 62,5/125 mm graded index fibre and sub-category A1d applies to 100/140 mm graded index fibre. Other applications include, but are not restricted to, the following:
- short reach, high bit-rate systems in telephony, distribution and local networks carrying data, voice and/or video services;
- on-premises intra-building and inter-building fibre installations including data centres, local area networks (LANs), storage area networks (SANs), private branch exchanges (PBXs), video, various multiplexing uses, outside telephone cable plant use, and miscellaneous related uses. Three types of requirements apply to these fibres:
- general requirements, as defined in IEC 60793-2;
- specific requirements common to the category A1 multimode fibres covered in this document and which are given in Clause 5;
- particular requirements applicable to individual fibre sub-categories and models, or specific applications, which are defined in the normative specification annexes.
This sixth edition cancels and replaces the fifth edition published in 2015. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: addition of model A1a.4 fibre which supports single wavelength or multi-wavelength transmission systems in the vicinity of 850 nm to 950 nm.

Committee
TC 86/SC 86A
DevelopmentNote
Stability Date: 2019. (08/2017)
DocumentType
Standard
Pages
93
PublisherName
International Electrotechnical Committee
Status
Superseded
SupersededBy
Supersedes

08/30195475 DC : 0 BS EN 60793-1-44 - OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH
CEI EN 62496-3-1 : 2011 OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
EN 60794-2:2017 Optical fibre cables - Part 2: Indoor cables - Sectional specification
13/30285351 DC : 0 BS EN 60793-1-43 - OPTICAL FIBRES - PART 1-43: MEASUREMENT METHODS - NUMERICAL APERTURE MEASUREMENT
BS EN 61280-1-4:2010 Fibre optic communication subsystem test procedures General communication subsystems. Light source encircled flux measurement method
IEEE 1222-2011 IEEE Standard for Testing and Performance for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable for Use on Electric Utility Power Lines
BS ISO/IEC 11801-1:2017 Information technology. Generic cabling for customer premises General requirements
10/30228043 DC : 2010 BS EN 60794-2-31 - OPTICAL FIBRE CABLES - PART 2-31: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING
09/30215019 DC : 0 BS EN 50551-1 - SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
BS EN 60794-2-51:2014 Optical fibre cables Indoor cables. Detail specification for simplex and duplex cables for use in cords for controlled environment
07/30172537 DC : 0 BS EN 60794-5-20 - OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
16/30337880 DC : 0 BS EN 60793-1-47 - OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS
CEI EN 60793-1-44 : 2012 OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH
12/30259054 DC : DRAFT JAN 2012 BS EN 60794-2-20 - OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES
04/30115144 DC : DRAFT JUN 2004 IEC 60793-1-49 - OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
BS EN 62664-1-1:2013 Fibre optic interconnecting devices and passive components. Fibre optic connector product specifications LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
15/30326655 DC : 0 BS EN 61280-4-1 - FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
07/30164159 DC : 0 BS EN 60794-2-30 - OPTICAL FIBRE CABLES - PART 2-30: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES
PD IEC/TR 61282-11:2012 Fibre optic communication system design guides Multimode launch conditions
CEI EN 62664-1-1 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTI MODE CONNECTORS TERMINATED ON IEC 60793-2 CATEGORY A1A FIBRE
BS EN 61300-1:2016 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures General and guidance
07/30172531 DC : 0 BS EN 60794-3-21 - OPTICAL FIBRE CABLES - PART 3-21: OUTDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR OPTICAL SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
BS EN 60793-1-44:2011 Optical fibres Measurement methods and test procedures. Cut-off wavelength
CEI EN 60793-1-49 : 2007 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
03/318352 DC : DRAFT NOV 2003 IEC 60794-2-31 ED.1 - OPTICAL FIBRE CABLES - PART 2-31: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING
07/30163785 DC : 0 BS EN 50377-3-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
09/30201674 DC : 0 BS EN 60794-2-51 - OPTICAL FIBRE CABLES - PART 2-51: INDOOR OPTICAL FIBRE CABLES PRODUCT SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PATCHCORDS FOR CONTROLLED ENVIRONMENT
15/30332693 DC : 0 BS EN 60794-2 - OPTICAL FIBRE CABLES - PART 2: INDOOR OPTICAL FIBRE CABLES - SECTIONAL SPECIFICATIONS
UNE-EN 50582:2016 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing
IEEE 1591.2-2017 IEEE Standard for Testing and Performance of Hardware for All-Dielectric Self-Supporting (ADSS) Fiber Optic Cable
BS EN 60794-2-31:2013 Optical fibre cables Indoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling
08/30186708 DC : DRAFT JULY 2008 BS EN 62496-3-1 - OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
08/30189351 DC : DRAFT SEP 2008 BS EN 60793-1-41 - OPTICAL FIBRES - PART 1-41: MEASUREMENT METHODS AND TEST PROCEDURES - BANDWIDTH
09/30203828 DC : 0 BS EN 62614 - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
02/203707 DC : DRAFT MAR 2002 IEC 60793-1-41. ED.2 - FIBRES AND CABLES - MEASUREMENT METHODS AND TEST PROCEDURES - BANDWIDTH
IEC TR 61282-11:2012 Fibre optic communication system design guides - Part 11: Multimode launch conditions
I.S. EN IEC 60793-1-54:2018 OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION
I.S. EN 60793-2:2016 OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL
I.S. EN 61753-022-2:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT (IEC 61753-022-2:2012 (EQV))
I.S. EN 60793-1-49:2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
I.S. EN 60794-3-70:2016 OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT
IEEE 525-2007 IEEE Guide for the Design and Installation of Cable Systems in Substations
CEI EN 50377-3-1 : 2009 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
BS EN 50377-3-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
BS EN 50551-1:2011 Simplex and duplex cables to be used for cords Blank detail specification and minimum requirements
NF EN 60794-2-10 : 2011 OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES
I.S. EN 60793-1-52:2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
NF EN 50551-1 : 2011 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
CEI EN 62614 : 2012 FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
I.S. EN 50551-1:2011 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
OVE/ONORM EN 60794-2-50 : 2009 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
IEC 60794-1-1:2015 Optical fibre cables - Part 1-1: Generic specification - General
EN 60793-1-51:2014 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
IEC 60793-1-47:2017 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
EN 50582:2016 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing
EN 60794-1-1:2016 Optical fibre cables - Part 1-1: Generic specification - General
EN 60794-2-20:2014 Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables
EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
EN 60793-1-52:2014 Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
IEC 60793-1-54:2018 Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
EN 61280-4-1:2009 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
EN 61784-5-3:2013 Industrial communication networks - Profiles - Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3
EN 60794-5-20 : 2014 Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
EN 60793-1-49:2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
EN 50516-2-1 : 2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
EN 61280-1-4:2010 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-6: Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
EN 62496-3-1:2010 Optical circuit boards - Performance standard - Part 3-1: Flexible optical circuit boards using unconnectorized optical glass fibres
EN 61753-022-2:2013 Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
EN 60794-2-30:2008 Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables
EN 60794-2-10:2011 Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables
EN 60794-2-22:2017 Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
DEFSTAN 23-09/2(2011) : 2011 GENERIC VEHICLE ARCHITECTURE (GVA)
DEFSTAN 23-09(PT1)/3(2013) : 2013 GENERIC VEHICLE ARCHITECTURE (GVA) - PART 1: INFRASTRUCTURE
BS EN 60794-5-10:2014 Optical fibre cables Family specification. Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
17/30340366 DC : 0 BS IEC 61755-6-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 6-2: CONNECTION OF 50,0 [MU]M CORE DIAMETER MULTIMODE PHYSICALLY CONTACTING FIBRES - NON-ANGLED FOR REFERENCE CONNECTOR APPLICATION, AT WAVELENGTH OF 850 NM USING TRADITIONAL MACROBEND ATTENUATION FIBRE ONLY
BS EN 62496-3-1:2010 Optical circuit boards. Performance standard Flexible optical circuit boards using unconnectorized optical glass fibres
I.S. EN 60794-3-12:2013 OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING (IEC 60794-3-12:2012 (EQV))
BS EN 60793-2:2012 Optical fibres Product specifications. General
10/30235439 DC : 0 BS EN 61755-1-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR OPTICAL INTERFACES - PART 1-1: OPTICAL INTERFACES FOR 50.0 UM MULTIMODE FIBRE - GENERAL AND GUIDANCE
BS EN 60794-2-22:2017 Optical fibre cables Indoor cables. Detail specification for multi-simplex breakout optical cables to be terminated with connectors
CEI EN 60794-2-31 : 2013 OPTICAL FIBRE CABLES - PART 2-31: INDOOR CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING
I.S. EN 50411-3-6:2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U)
BS EN 60794-2-20:2014 Optical fibre cables Indoor cables. Family specification for multi-fibre optical cables
CEI EN 60793-1-52 : 2014 OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE TESTS
BS EN 50173-1:2011 Information technology. Generic cabling systems General requirements
BS EN 60794-1-20:2014 Optical fibre cables Generic specification. Basic optical cable test procedures. General and definitions
UNE-EN 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
UNE-EN 60793-1-53:2014 Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
14/30310002 DC : 0 BS EN 60794-3-20 - OPTICAL FIBRE CABLES - PART 3-20: OUTDOOR CABLES - FAMILY SPECIFICATION FOR SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES
EN IEC 60793-1-47:2018 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
17/30347865 DC : 0 BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEMS, WALL BOX FOR SPLICE TO PATCHCORD CONNECTIONS, FOR CATEGORY C AND A
CSA ISO/IEC 14763-3 : 2015 INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING
BS EN 50582:2016 Procedure to assess the circuit integrity of optical fibres in a cable under resistance to fire testing
NF EN 60794-2-31 : 2013 OPTICAL FIBRE CABLES - PART 2-31: INDOOR CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING
BS EN 60794-2-10:2011 Optical fibre cables Indoor optical fibre cables. Family specification for simplex and duplex cables
CEI EN 50173-1 : 2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 60793-1-41:2010 Optical fibres Measurement methods and test procedures. Bandwidth
BS EN 60793-1-20:2014 Optical fibres Measurement methods and test procedures. Fibre geometry
06/30153348 DC : DRAFT JULY 2006
I.S. EN 62664-1-1:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR PRODUCT SPECIFICATIONS - PART 1-1: LC-PC DUPLEX MULTIMODE CONNECTORS TERMINATED ON IEC 60793-2-10 CATEGORY A1A FIBRE (IEC 62664-1-1:2013 (EQV))
CEI EN 60794-2-30 : 2010 OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES
NF EN 62496-2-1 : 2011 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION
I.S. EN 60794-2-30:2008 OPTICAL FIBRE CABLES - PART 2-30: INDOOR CABLES - FAMILY SPECIFICATION FOR RIBBON CABLES
I.S. EN IEC 60793-1-47:2018 OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS
ANSI INCITS 479 : 2011 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 5 (FC-PI-5)
NF EN 60794-3-70 : 2016 OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT
BS ISO/IEC 14763-3 : 2006 INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING
I.S. EN 60794-3-21:2016 OPTICAL FIBRE CABLES - PART 3-21: OUTDOOR CABLES PRODUCT SPECIFICATION FOR OPTICAL SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
I.S. EN IEC 61281-1:2018 FIBRE OPTIC COMMUNICATION SUBSYSTEMS - PART 1: GENERIC SPECIFICATION
I.S. EN 60794-2:2017 OPTICAL FIBRE CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION
ISO/IEC 14763-3:2014 Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling
EN IEC 61281-1:2018 Fibre optic communication subsystems - Part 1: Generic specification
BS EN 60794-2-11:2012 Optical fibre cables Indoor optical fibre cables. Detailed specification for simplex and duplex cables for use in premises cabling
I.S. EN 60794-1-20:2014 OPTICAL FIBRE CABLES - PART 1-20: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - GENERAL AND DEFINITIONS
EN 50173-1:2011 Information technology - Generic cabling systems - Part 1: General requirements
UNE-EN 60794-2-30:2011 Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables
ISO/IEC 14165-115:2006 Information technology Fibre Channel Part 115: Physical Interfaces (FC-PI)
EN 60793-2:2016 Optical fibres - Part 2: Product specifications - General
IEC TR 62614-2:2015 Fibre optics - Multimode launch conditions - Part 2: Determination of launch condition requirements for measuring multimode attenuation
IEC 60794-1-1 REDLINE : 4ED 2015 OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
IEC 62843:2013 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
IEC PAS 60794-2-11:2004 Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling
IEC 61280-4-1:2009 Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement
I.S. EN 61918:2013 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES
EN 60794-3-12:2013 Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
CEI EN 50411-3-6 : 2014 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE FOR USE IN AN OUTDOOR PROTECTED ENVIRONMENT (CAT U)
I.S. EN 50173-1:2011 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
08/30178186 DC : DRAFT FEB 2008 BS EN 60794-5-10 - OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION FOR OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
BS EN 50516-1-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type SC-RJ PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in IEC 61753-1-3
BS EN 60794-2-50:2008 Optical fibre cables Indoor cables. Family specification for simplex and duplex cables for use in terminated cable assemblies
IEEE C37.94-2002 IEEE Standard for N Times 64 Kilobit Per Second Optical Fiber Interfaces Between Teleprotection and Multiplexer Equipment
13/30279735 DC : 0 BS EN 60793-1-53 - OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION
CEI EN 50516-1-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
BS EN 60794-3-70:2016 Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment
BS EN 60793-1-53:2014 Optical fibres Measurement methods and test procedures. Water immersion tests
CEI EN 61300-1 : 2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
BS EN 60794-2:2017 Optical fibre cables Indoor cables. Sectional specification
UNE-EN 60794-1-20:2014 Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions
BS EN 62496-2-1:2011 Optical circuit boards Measurements. Optical attenuation and isolation
BS EN 50411-3-1:2012 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Fibre management system, splice wall box, for category C & G
NF EN 60794-2-51 : 2014 OPTICAL FIBRE CABLES - PART 2-51: INDOOR CABLES - DETAIL SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN CORDS FOR CONTROLLED ENVIRONMENT
04/30115140 DC : DRAFT JUN 2004 IEC 60794-5 - OPTICAL FIBRE CABLES - PART 5: SECTIONAL SPECIFICATION FOR MICRODUCT CABLING FOR INSTALLATION BY BLOWING
I.S. EN 62614:2010 FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
15/30272336 DC : 0 BS EN 50411-3-4 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-4: FIBRE MANAGEMENT SYSTEM, MODULAR SPLICE AND CONNECTOR WALL BOX, FOR CATEGORY C & A
CEI EN 60794-5-20 : 2014 OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
CEI EN 61280-4-1 : 2011 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
CEI EN 50551-1 : 2012 SIMPLEX AND DUPLEX CABLES TO BE USED FOR CORDS - PART 1: BLANK DETAIL SPECIFICATION AND MINIMUM REQUIREMENTS
BS IEC/IEEE 62582-5:2015 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Optical time domain reflectometry
13/30286622 DC : 0 BS EN 60793-1-20 - OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY
14/30310028 DC : 0 BS EN 60794-1-1 - OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
I.S. EN 61280-1-4:2010 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-4: GENERAL COMMUNICATION SUBSYSTEMS - LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD
13/30292880 DC : 0 BS EN 60794-3-70 - OPTICAL FIBRE CABLES - PART 3.70: FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT
BS EN 62614:2010 Fibre optics. Launch condition requirements for measuring multimode attenuation
12/30262212 DC : 0 BS EN 50516-3-1 - INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
UNE-EN 60793-1-51:2014 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
12/30266214 DC : 0 ISO/IEC CD 14763-3 - IMPLEMENTATION AND OPERATION OF CPC - PART 3: TESTING OF OPTICAL FIBRE CABLING (2ND EDITION)
BS IEC 62843:2013 Standard for N times 64 kilobit per second optical fiber interfaces between teleprotection and multiplexer equipment
BS EN 60793-1-43:2015 Optical fibres Measurement methods and test procedures. Numerical aperture measurement
03/318350 DC : DRAFT NOV 2003 IEC 60794-2-11 ED.1 - OPTICAL FIBRE CABLES - PART 2-11: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PREMISES CABLING
03/318353 DC : DRAFT NOV 2003 IEC 60794-3-12 ED.1 - OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
BS EN 50516-3-1:2014 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
UNE-EN 60793-1-52:2014 Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
UNE-EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods - Damp heat (steady state) tests
IEC PAS 62614:2009 Fibre optics - Launch condition requirements for measuring multimode attenuation
CEI EN 60794-2-11 : 2013 OPTICAL FIBRE CABLES - PART 2-11: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PREMISES CABLING
CEI EN 60794-2-21 : 2013 OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING
CEI EN 50516-2-1 : 2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
PREN 50411-4-1 : DRAFT 2017 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
I.S. EN 62496-2-1:2011 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION (IEC 62496-2-1:2011 (EQV))
I.S. EN 60794-1-1:2016 OPTICAL FIBRE CABLES - PART 1-1: GENERIC SPECIFICATION - GENERAL
I.S. EN 60794-2-50:2008 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
I.S. EN 60794-2-10:2011 OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES (IEC 60794-2-10:2011 (EQV))
CEI EN 50411-3-1 : 2013 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G
CEI EN 61280-1-4 : 2011 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 1-4: GENERAL COMMUNICATION SUBSYSTEMS - LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD
CEI EN 60794-2-10 : 2012 OPTICAL FIBRE CABLES - PART 2-10: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES
IEC 61280-1-4:2009 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method
IEC 60793-1-47 : 4.0 OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS
NF EN 50173-1 : 2017 INFORMATION TECHNOLOGY - GENERIC CABLING SYSTEMS - PART 1: GENERAL REQUIREMENTS
I.S. EN 61300-1:2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 1: GENERAL AND GUIDANCE
ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
IEC 60794-2-50:2008 Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies
IEC 61918:2013 Industrial communication networks - Installation of communication networks in industrial premises
IEC 60794-2-31:2012 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
IEC 60794-2-10:2011 Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables
IEC 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
IEC 60794-2-22:2016 Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables to be terminated with connectors
IEC 60794-1-1:2015 RLV Optical fibre cables - Part 1-1: Generic specification - General
CSA ISO/IEC 14165-116 : 2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC)
CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC)
CSA ISO/IEC 14165-116 : 2006 : INC : AMD 1 : 2010 : R2016 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 116: 10 GIGABIT FIBRE CHANNEL (10GFC)
IEC 60793-1-47:2017 RLV Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
I.S. EN 60794-2-11:2012 OPTICAL FIBRE CABLES - PART 2-11: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-11:2012 (EQV))
BS EN 50516-2-1:2011 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems. Product specifications Type ODVA PC industrial terminated on EN 60793-2-10 category A1a and A1b multimode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
05/30128960 DC : 0 EN 50377-4-1 - CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: TYPE SC-PC DUPLEX TERMINATED ON IEC 60793-2 CATEGORY A 1 A AND A L B MULTIMODE FIBRE
BS EN 60793-1-52:2014 Optical fibres Measurement methods and test procedures. Change of temperature tests
15/30321396 DC : DRAFT FEB 2015 BS EN 60794-2-30 - OPTICAL FIBRE CABLES - PART 2-30: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES
17/30361915 DC : DRAFT JUL 2017 BS EN 62149-11 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 11: MULTIPLE CHANNEL TRANSMITTER/RECEIVER CHIP SCALE PACKAGE WITH MULTIMODE FIBRE INTERFACE
10/30240333 DC : 0 BS EN 50411-3-6 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-6: MULTIMODE MECHANICAL FIBRE SPLICE
NF EN 60794-2 : 2017 OPTICAL FIBER CABLES - PART 2: INDOOR CABLES - SECTIONAL SPECIFICATION
17/30331301 DC : 0 BS ISO/IEC 14763-3 AMENDMENT 1 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING
BS EN 60793-1-49:2006 Optical fibres Measurement methods and test procedures - Differential mode delay
03/318351 DC : DRAFT NOV 2003 IEC 60794-2-21 ED.1 - OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING
BS EN 61280-4-1:2009 Fibre optic communication subsystem test procedures Installed cable plant. Multimode attenuation measurement
CEI EN 60793-1-41 : 2012 OPTICAL FIBRES - PART 1-41: MEASUREMENT METHODS AND TEST PROCEDURES - BANDWIDTH
CEI EN 61746-2 : 2012 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
17/30347868 DC : 0 BS EN 50411-4-1 - FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 4-1: PASSIVE OPTICAL STREET CABINET FOR CATEGORY A
NF EN 60794-2-50 : 2009 OPTICAL FIBRE CABLES - PART 2-50: INDOOR OPTICAL FIBRE CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
BS EN 60794-3-21:2016 Optical fibre cables Outdoor cables. Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling
UNE-EN 60794-5:2012 Optical fibre cables - Part 5: Sectional specification - Microduct cabling for installation by blowing
CEI EN 60794-2-50 : 2010 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
CEI EN 60793-1-51 : 2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS
10/30230826 DC : DRAFT JULY 2010 BS EN 60793-2 - OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL
13/30279729 DC : 0 BS EN 60793-1-52 - OPTICAL FIBRES - PART 1-52: MEASUREMENT METHODS AND TEST PROCEDURES - CHANGE OF TEMPERATURE
IEEE 1591.1-2012 IEEE Standard for Testing and Performance of Hardware for Optical Ground Wire (OPGW)
14/30315980 DC : 0 BS EN 60794-2-22 - OPTICAL FIBRE CABLES - PART 2-22: INDOOR OPTICAL FIBRE CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
PD IEC/TR 62839-1:2014 Environmental declaration Wires, cables and accessory products. Specific rules
ANSI INCITS 533 : 2016 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 6P (FC-PI-6P)
I.S. EN 60794-2-31:2013 OPTICAL FIBRE CABLES - PART 2-31: INDOOR CABLES - DETAILED SPECIFICATION FOR OPTICAL FIBRE RIBBON CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-31:2012 (EQV))
I.S. EN 60794-5-10:2014 OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
18/30376687 DC : DRAFT APR 2018 BS EN 62149-11 - FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 11: MULTIPLE CHANNEL TRANSMITTER/RECEIVER CHIP SCALE PACKAGE WITH MULTIMODE FIBRE INTERFACE
CEI EN 60794-2-22 : 1ED 2017 OPTICAL FIBRE CABLES - PART 2-22: INDOOR CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
13/30279650 DC : 0 BS EN 60793-1-50 - OPTICAL FIBRES - PART 1-50: MEASUREMENT METHODS AND TEST PROCEDURES - DAMP HEAT (STEADY STATE)
BS EN 60794-2-30:2008 Optical fibre cables Indoor cables. Family specification for ribbon cables
10/30240040 DC : DRAFT DEC 2010 BS EN 60793-1-54 - OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION
CEI EN 60794-3-12 : 2014 OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
CEI EN 60793-1-54 : 2013 OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION
BS EN 60793-1-50:2015 Optical fibres Measurement methods. Damp heat (steady state) tests
BS EN 61753-022-2:2013 Fibre optic interconnecting devices and passive components. Performance standard Fibre optic connectors terminated on multimode fibre for category C. Controlled environment
16/30338646 DC : 0 BS EN 60794-1-31 - OPTICAL FIBRE CABLES - PART 1-31: SECTIONAL SPECIFICATION FOR CABLE ELEMENT - OPTICAL FIBRE RIBBONS
BS EN 60793-1-54 : 2018 OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION
16/30325971 DC : 0 BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS
UNE-EN 60794-1-1:2016 Optical fibre cables - Part 1-1: Generic specification - General
BS EN 60793-1-51:2014 Optical fibres Measurement methods and test procedures. Dry heat (steady state) tests
CSA ISO/IEC 14165-115 : 2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 115: PHYSICAL INTERFACES (FC-PI)
I.S. EN 61280-4-1:2009 FIBRE OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-1: INSTALLED CABLE PLANT - MULTIMODE ATTENUATION MEASUREMENT
ANSI INCITS 450 : 2009 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-4 (FC-PI-4)
CEI EN 50516-3-1 : 2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
I.S. EN 50516-2-1:2011 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 2-1: TYPE ODVA PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
I.S. EN 61784-5-3:2013 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
ANSI INCITS 404 : 2006 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACES-2 (FC-PI-2)
I.S. EN 60793-1-51:2014 OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE) TESTS
I.S. EN 50516-3-1:2014 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE ODVA APC TERMINATED ON EN 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY 1 (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN EN 50173-1 AND IEC 61753-1-3
CEI EN 61753-022-2 : 2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARD - PART 022-2: FIBRE OPTIC CONNECTORS TERMINATED ON MULTIMODE FIBRE FOR CATEGORY C - CONTROLLED ENVIRONMENT
I.S. EN 60794-2-22:2017 OPTICAL FIBRE CABLES - PART 2-22: INDOOR CABLES - DETAIL SPECIFICATION FOR MULTI-SIMPLEX BREAKOUT OPTICAL CABLES TO BE TERMINATED WITH CONNECTORS
I.S. EN 60794-2-20:2014 OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES
I.S. EN 60794-2-21:2012 OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-21:2012 (EQV))
I.S. EN 60794-5-20:2014 OPTICAL FIBRE CABLES - PART 5-20: FAMILY SPECIFICATION - OUTDOOR MICRODUCT FIBRE UNITS, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
CEI EN 62496-2-1 : 2012 OPTICAL CIRCUIT BOARDS - PART 2-1: MEASUREMENTS - OPTICAL ATTENUATION AND ISOLATION
CEI EN 60794-5-10 : 2014 OPTICAL FIBRE CABLES - PART 5-10: FAMILY SPECIFICATION - OUTDOOR MICRODUCT OPTICAL FIBRE CABLES, MICRODUCTS AND PROTECTED MICRODUCTS FOR INSTALLATION BY BLOWING
IEEE 802.3-2012 IEEE Standard for Ethernet
IEC 60794-2:2017 Optical fibre cables - Part 2: Indoor cables - Sectional specification
IEC PAS 60794-2-31:2004 Optical fibre Cables- Part 2-31: Indoor optical fibre cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
IEC TR 62839-1:2014 Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules
I.S. EN 60793-1-44:2011 OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH
I.S. EN 61746-2:2011 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
I.S. EN 60793-1-20:2014 OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY
IEC PAS 60794-3-12:2004 Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
EN 61746-2:2011/AC:2014 CALIBRATION OF OPTICAL TIME-DOMAIN REFLECTOMETERS (OTDR) - PART 2: OTDR FOR MULTIMODE FIBRES
IEC 62614:2010 Fibre optics - Launch condition requirements for measuring multimode attenuation
IEC 60794-2-51:2014 Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment
BS EN 61918:2013 Industrial communication networks. Installation of communication networks in industrial premises
IEC 60794-3-70:2016 Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
BS EN 61784-5-3:2013 Industrial communication networks. Profiles Installation of fieldbuses. Installation profiles for CPF 3
EN 60794-2-50 : 2008 OPTICAL FIBRE CABLES - PART 2-50: INDOOR CABLES - FAMILY SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN TERMINATED CABLE ASSEMBLIES
IEC 60793-1-41:2010 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
IEC 61753-022-2:2012 Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment
IEC 60794-2-21:2012 Optical fibre cables - Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
IEC 60794-5-20:2014 Optical fibre cables - Part 5-20: Family specification - Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
IEC 60794-2-20:2013 Optical fibre cables - Part 2-20: Indoor cables - Family specification for multi-fibre optical cables
IEC 60793-1-53:2014 Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
IEC 60794-5-10:2014 Optical fibre cables - Part 5-10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
IEC 61784-5-15:2010+AMD1:2015 CSV Industrial communication networks - Profiles - Part 5-15: Installation of fieldbuses - Installation profiles for CPF 15
IEC 60794-3-21:2015 Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling
IEC 62664-1-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
IEC 62496-2-1:2011 Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
IEC 60794-2-11:2012 Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling
UNE-EN 60793-1-20:2015 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
IEC 60793-1-51:2014 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
IEC 60793-1-20:2014 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
IEC 61300-1:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
IEC 60793-1-44:2011 Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength
IEC 60793-1-50:2014 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
IEC 60793-1-49:2006 Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
IEC 60793-1-52:2014 Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
EN 50411-3-1:2012 Fibre organisers and closures to be used in optical fibre communication systems - Product specifications - Part 3-1: Fibre management system, splice wall box, for category C & G
BS EN IEC 60793-1-47:2018 Optical fibres Measurement methods and test procedures. Macrobending loss
CEI EN 60793-1-53 : 2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS
10/30217980 DC : 0 BS EN 61753-122-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PERFORMANCE STANDARDS - PART 122-2: SIMPLEX AND DUPLEX CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
13/30279654 DC : 0 BS EN 60793-1-51 - OPTICAL FIBRES - PART 1-51: MEASUREMENT METHODS AND TEST PROCEDURES - DRY HEAT (STEADY STATE)
BS EN 61746-2:2011 Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres
14/30189466 DC : 0 BS IEC/IEEE 62582-5 ED 1.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - ELECTRICAL EQUIPMENT CONDITION MONITORING METHODS - PART 5: OPTICAL TIME DOMAIN REFLECTOMETRY
BS EN 50411-3-6:2013 Fibre organisers and closures to be used in optical fibre communication systems. Product specifications Multimode mechanical fibre splice for use in an outdoor protected environment (Cat U)
11/30247511 DC : 0 BS EN 61753-124-2 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - PART 124-2: SIMPLEX AND DUPLEX REFERENCE CORDS WITH MULTIMODE FIBRE AND CYLINDRICAL FERRULE CONNECTORS FOR CATEGORY C - CONTROLLED ENVIRONMENT
BS EN 60794-3-12:2013 Optical fibre cables Outdoor cables. Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
EN 60794-3-70:2016 Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment
07/30172523 DC : 0 BS EN 60794-3-12 - OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR OPTICAL FIBRE CABLES - PRODUCT SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
I.S. EN 62496-3-1:2010 OPTICAL CIRCUIT BOARDS - PERFORMANCE STANDARD - PART 3-1: FLEXIBLE OPTICAL CIRCUIT BOARDS USING UNCONNECTORIZED OPTICAL GLASS FIBRES
03/318354 DC : DRAFT NOV 2003 IEC 60794-3-21 ED.1 - OPTICAL FIBRE CABLES - PART 3-21: OUTDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR OPTICAL SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
BS EN IEC 61281-1:2018 Fibre optic communication subsystems Generic specification
NF EN 60793-1-49 : 2006 OPTICAL FIBRES - PART 1-49: MEASUREMENT METHODS AND TEST PROCEDURES - DIFFERENTIAL MODE DELAY
BS EN 60794-5-20:2014 Optical fibre cables Family specification. Outdoor microduct fibre units, microducts and protected microducts for installation by blowing
14/30310016 DC : 0 BS EN 60793-2 - OPTICAL FIBRES - PART 2: PRODUCT SPECIFICATIONS - GENERAL
CEI EN 60794-2-20 : 2014 OPTICAL FIBRE CABLES - PART 2-20: INDOOR CABLES - FAMILY SPECIFICATION FOR MULTI-FIBRE OPTICAL CABLES
10/30228047 DC : 2010 BS EN 60794-2-21 - OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING
EN IEC 60793-1-54:2018 Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
IEC 60793-1-54 : 3.0 OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION
CEI EN 61784-5-3 : 2014 INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - PART 5-3: INSTALLATION OF FIELDBUSES - INSTALLATION PROFILES FOR CPF 3
I.S. EN 60793-1-43:2015 OPTICAL FIBRES - PART 1-43: MEASUREMENT METHODS AND TEST PROCEDURES - NUMERICAL APERTURE MEASUREMENT
CAN/CSA-ISO/IEC 14165-115:2006(R2016) INFORMATION TECHNOLOGY - FIBRE CHANNEL - PART 115: PHYSICAL INTERFACES (FC-PI)
NF EN 60794-3-12 : 2013 OPTICAL FIBRE CABLES - PART 3-12: OUTDOOR CABLES - DETAILED SPECIFICATION FOR DUCT AND DIRECTLY BURIED OPTICAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
NF EN 62614 : 2011 FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
ANSI INCITS 512 : 2015 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-6 (FC-PI-6)
I.S. EN 60793-1-41:2010 OPTICAL FIBRES - PART 1-41: MEASUREMENT METHODS AND TEST PROCEDURES - BANDWIDTH
I.S. EN 50411-3-1:2012 FIBRE ORGANISERS AND CLOSURES TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: FIBRE MANAGEMENT SYSTEM, SPLICE WALL BOX, FOR CATEGORY C & G
I.S. EN 60793-1-50:2015 OPTICAL FIBRES - PART 1-50: MEASUREMENT METHODS - DAMP HEAT (STEADY STATE) TESTS
IEC PAS 60794-3-21:2004 Optical fibre cables - Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling
BS EN 60794-2-21:2012 Optical fibre cables Indoor optical fibre cables. Detailed specification for multi-fibre optical distribution cables for use in premises cabling
I.S. EN 60794-2-51:2014 OPTICAL FIBRE CABLES - PART 2-51: INDOOR CABLES - DETAIL SPECIFICATION FOR SIMPLEX AND DUPLEX CABLES FOR USE IN CORDS FOR CONTROLLED ENVIRONMENT
BS EN 60794-1-1:2016 Optical fibre cables Generic specification. General
ISO/IEC 11801-1:2017 Information technology — Generic cabling for customer premises — Part 1: General requirements
UNE-EN 61300-1:2017 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
NF EN 60794-3-21 : 2018 OPTICAL FIBRE CABLES - PART 3-21: OUTDOOR CABLES - PRODUCT SPECIFICATION FOR OPTICAL SELF-SUPPORTING AERIAL TELECOMMUNICATION CABLES FOR USE IN PREMISES CABLING
ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
IEC 61281-1:2017 Fibre optic communication subsystems - Part 1: Generic specification
I.S. EN 60793-1-54:2013 OPTICAL FIBRES - PART 1-54: MEASUREMENT METHODS AND TEST PROCEDURES - GAMMA IRRADIATION (IEC 60793-1-54:2012 (EQV))
I.S. EN 60793-1-53:2014 OPTICAL FIBRES - PART 1-53: MEASUREMENT METHODS AND TEST PROCEDURES - WATER IMMERSION TESTS
IEC 60794-2-30:2008 Optical fibre cables - Part 2-30: Indoor cables - Family specification for ribbon cables
I.S. EN 50377-3-1:2008 CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 3-1: TYPE SG TERMINATED ON IEC 60793-2-10 CATEGORY A1A, A1B OR EQUIVALENT MULTIMODE FIBRE FOR CATEGORY C
ISO/IEC 14165-116:2005 Information technology Fibre Channel Part 116: 10 Gigabit (10GFC)
IEC PAS 60794-2-21:2004 Optical fibre cables - Part 2-21: Indoor optical fibre cables - Detailed specification for multi-fibre optical distribution cables for use in premises cabling
EN 61918:2013/AC:2014 INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED)
EN 50516-1-1:2011/AC:2012 INDUSTRIAL CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE CONTROL AND COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 1-1: TYPE SC-RJ PC INDUSTRIAL TERMINATED ON EN 60793-2-10 CATEGORY A1A AND A1B MULTIMODE FIBRE TO MEET THE REQUIREMENTS OF CATEGORY I (INDUSTRIAL ENVIRONMENTS) AS SPECIFIED IN IEC 61753-1-3
IEC 62496-3-1:2009 Optical circuit boards - Part 3-1: Performance standards - Flexible optical circuit boards using unconnectorized optical glass fibres
IEC 60794-3-12:2012 Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling
IEC 61746-2:2010 Calibration of optical time-domain reflectometers (OTDR) - Part 2: OTDR for multimode fibres
EN 60794-2-31:2013 Optical fibre cables - Part 2-31: Indoor cables - Detailed specification for optical fibre ribbon cables for use in premises cabling
EN 60794-2-21:2012 OPTICAL FIBRE CABLES - PART 2-21: INDOOR OPTICAL FIBRE CABLES - DETAILED SPECIFICATION FOR MULTI-FIBRE OPTICAL DISTRIBUTION CABLES FOR USE IN PREMISES CABLING (IEC 60794-2-21:2012)
EN 60794-1-20:2014 Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions
EN 60794-3-21:2016 Optical fibre cables - Part 3-21: Outdoor cables - Product specification for optical self-supporting aerial telecommunication cables for use in premises cabling
EN 60793-1-41:2010 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
EN 61300-1:2016 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
EN 50551-1:2011 Simplex and duplex cables to be used for cords - Part 1: Blank Detail Specification and minimum requirements
EN 62496-2-1:2011 Optical circuit boards - Part 2-1: Measurements - Optical attenuation and isolation
EN 60794-2-11:2012 Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling
EN 60793-1-20:2014/AC:2016-03 OPTICAL FIBRES - PART 1-20: MEASUREMENT METHODS AND TEST PROCEDURES - FIBRE GEOMETRY (IEC 60793-1-20:2014/COR1:2016)
EN 62664-1-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector product specifications - Part 1-1: LC-PC duplex multimode connectors terminated on IEC 60793-2-10 category A1a fibre
EN 60793-1-53:2014 Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
EN 60793-1-54:2013 Optical fibres - Part 1-54: Measurement methods and test procedures - Gamma irradiation
EN 60794-5-10:2014 Optical fibre cables - Part 5–10: Family specification - Outdoor microduct optical fibre cables, microducts and protected microducts for installation by blowing
EN 60793-1-44:2011 OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH
EN 50377-3-1:2008 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1: Type SG terminated on IEC 60793-2-10 category A1a, A1b or equivalent multimode fibre for category C
EN 50516-3-1:2014 Industrial connector sets and interconnect components to be used in optical fibre control and communication systems - Product specifications - Part 3-1: Type ODVA APC terminated on EN 60793-2-50 category B1.1 and B1.3 singlemode fibre to meet the requirements of category I (industrial environments) as specified in EN 50173-1 and IEC 61753-1-3
EN 62614 : 2010 FIBRE OPTICS - LAUNCH CONDITION REQUIREMENTS FOR MEASURING MULTIMODE ATTENUATION
EN 60794-2-51:2014 Optical fibre cables - Part 2-51: Indoor cables - Detail specification for simplex and duplex cables for use in cords for controlled environment
EN 60793-1-50:2015 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
UNE-EN 50173-1:2009 Information technology - Generic cabling systems -- Part 1: General requirements

ISO/IEC 14165-116:2005 Information technology Fibre Channel Part 116: 10 Gigabit (10GFC)
IEC 61280-1-3:2010 Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement
IEC 60793-1-41:2010 Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
IEC 60793-1-43:2015 Optical fibres - Part 1-43: Measurement methods and test procedures - Numerical aperture measurement
ISO/IEC 14165-115:2006 Information technology Fibre Channel Part 115: Physical Interfaces (FC-PI)
IEC 60793-1-52:2014 Optical fibres - Part 1-52: Measurement methods and test procedures - Change of temperature tests
IEC 60793-2:2015 Optical fibres - Part 2: Product specifications - General
IEEE 802.3-2012 IEEE Standard for Ethernet
IEC 60793-1-50:2014 Optical fibres - Part 1-50: Measurement methods and test procedures - Damp heat (steady state) tests
ISO/IEC 11801:2002 Information technology Generic cabling for customer premises
IEC 60793-1-42:2013 Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion
IEC 60793-1-49:2006 Optical fibres - Part 1-49: Measurement methods and test procedures - Differential mode delay
IEEE 802.3AE : 2002 INFORMATION TECHNOLOGY - TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT: MEDIA ACCESS CONTROL (MAC) PARAMETERS, PHYSICAL LAYERS, AND MANAGEMENT PARAMETERS FOR 10 GB/S OPERATION
IEC 60794-1-1:2015 Optical fibre cables - Part 1-1: Generic specification - General
IEC 60793-1-33:2017 Optical fibres - Part 1-33: Measurement methods and test procedures - Stress corrosion susceptibility
IEC 60793-1-32:2010 Optical fibres - Part 1-32: Measurement methods and test procedures - Coating strippability
IEC 60793-1-51:2014 Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
IEC 60793-1-46:2001 Optical fibres - Part 1-46: Measurement methods and test procedures - Monitoring of changes in optical transmittance
IEC 60793-1-40:2001 Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation
IEC 61280-4-1:2009 Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement
IEC TR 62048:2014 Optical fibres - Reliability - Power law theory
ANSI INCITS 512 : 2015 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-6 (FC-PI-6)
IEC 60793-1-21:2001 Optical fibres - Part 1-21: Measurement methods and test procedures - Coating geometry
IEC 60793-1-47 : 4.0 OPTICAL FIBRES - PART 1-47: MEASUREMENT METHODS AND TEST PROCEDURES - MACROBENDING LOSS
IEC 60793-1-47:2017 Optical fibres - Part 1-47: Measurement methods and test procedures - Macrobending loss
ANSI INCITS 479 : 2011 INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE - 5 (FC-PI-5)
IEEE 802.3bm-2015 ETHERNET - AMENDMENT 3: PHYSICAL LAYER SPECIFICATIONS AND MANAGEMENT PARAMETERS FOR 40 GB/S AND 100 GB/S OPERATION OVER FIBER OPTIC CABLES
IEC 60793-1-20:2014 Optical fibres - Part 1-20: Measurement methods and test procedures - Fibre geometry
IEC 60793-1-53:2014 Optical fibres - Part 1-53: Measurement methods and test procedures - Water immersion tests
IEC 60793-1-34:2006 Optical fibres - Part 1-34: Measurement methods and test procedures - Fibre curl
ISO/IEC/IEEE 8802-3:2017 Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet
IEC 60793-1-22:2001 Optical fibres - Part 1-22: Measurement methods and test procedures - Length measurement
IEC 60793-1-31:2010 Optical fibres - Part 1-31: Measurement methods and test procedures - Tensile strength
IEC 60793-1-30:2010 Optical fibres - Part 1-30: Measurement methods and test procedures - Fibre proof test
IEC 61280-1-4:2009 Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method

View more information
US$313.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.