• There are no items in your cart

IEC 60850:2014

Current
Current

The latest, up-to-date edition.

Railway applications - Supply voltages of traction systems
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French

Published date

11-12-2014

FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Voltages and frequencies of traction systems
5 Testing
6 Test methodology
Annex A (normative) - Maximum value of voltage
        U according to duration
Annex B (normative) - Alternative values of traction
        power supply systems
Annex C (informative) - Changes, interruptions and
        distortion of voltages
Bibliography

IEC 60850:2014 specifies the main characteristics of the supply voltages of traction systems, such as traction fixed installations, including auxiliary devices fed by the contact line, and rolling stock, for use in the following applications:
- railways;
- guided mass transport systems such as tramways, light trains, elevated and underground railways and trolleybus systems;
- rail bound material transportation systems, e.g. for coal or iron-ore. This standard is also applicable for low speed maglev trains or linear motor transport systems. This new edition includes the following significant technical changes with respect to the previous edition:
- some definitions in Clause 3 clarified;
- Subclause 4.1 completed;
- Table 1 modified;
- Annex B modified with new Table B.1.

Committee
TC 9
DevelopmentNote
Stability date: 2017. (11/2014)
DocumentType
Standard
Pages
37
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

Standards Relationship
NF EN 60850 : 2000 PR Identical
BS 7571:1992 Identical
BS 173:1980 Similar to
NEN 10850 : 1990 Identical

CEI EN 60077-3 : 2002 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D/C/ CIRCUIT-BREAKERS
CEI EN 60349-4 : 2014 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
BS EN 60349-1:2010 Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors
16/30296073 DC : 0 BS EN 62924 ED 1.0 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - STATIONARY ENERGY STORAGE SYSTEM FOR DC TRACTION SYSTEMS
IEEE 1653.3-2012 IEEE Guide for Rail Transit Traction Power Systems Modeling
BS EN 62924:2017 Railway applications. Fixed installations. Stationary energy storage system for DC traction systems
10/30235845 DC : 0 BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS
10/30211766 DC : 0 BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITOR
BS EN 50123-7-3:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating voltage transducers and other voltage measuring devices
PREN 50463-2 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
PD CLC/TS 50238-2:2015 Railway applications. Compatibility between rolling stock and train detection systems Compatibility with track circuits
15/30329546 DC : 0 BS EN 50463-2 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
BS EN 60077-2:2017 Railway applications. Electric equipment for rolling stock Electrotechnical components. General rules
BS EN 61287-1:2014 Railway applications. Power converters installed on board rolling stock Characteristics and test methods
NF EN 62621 : 2017 AMD 1 2018 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS
I.S. EN 62621:2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS
BS EN 61881-3 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS
I.S. EN 50123-1:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - GENERAL
IEC 62427:2007 Railway applications - Compatibility between rolling stock and train detection systems
IEC 62497-2:2010 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
BS EN 50123-7-2:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Isolating current transducers and other current measuring devices
UNE-EN 61287-1:2015 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
IEC 61133:2016 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
IEC 60077-2 REDLINE : 2ED 2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
IEC 62128-3:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual interaction of a.c. and d.c. traction systems
IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
EN 60077-5:2003 Railway applications - Electrotechnical equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
BS EN 50155:2017 Railway applications. Rolling stock. Electronic equipment
16/30282633 DC : 0 BS EN 50155 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
EN 50502:2015 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
IEC 61133:2016 RLV Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
NF EN 60077-4 : 2003 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS
EN 60077-3:2002 Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers
NF EN 60077-3 : 2002 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: RULES FOR DC CIRCUIT-BREAKERS
EN 61881-2 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012)
I.S. EN 50123-3:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
UNE-EN 61377:2016 Railway applications - Rolling stock - Combined test method for traction systems
BS EN 50463-1:2017 Railway applications. Energy measurement on board trains General
BS EN 60349-4:2013 Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter
15/30288088 DC : DRAFT FEB 2015 BS EN 62864-1 ED 1.0 - RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM
13/30256030 DC : 0 BS IEC 62695 ED 1.0 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - TRACTION TRANSFORMERS
EN 60077-2:2017 Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
11/30215604 DC : 0 BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
11/30230287 DC : 0 BS IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINES VEHICLES
BS EN 50502:2015 Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems
BS EN 60077-4:2003 Railway applications. Electric equipment for rolling stock Electrotechnical components. Rules for AC circuit-breakers
10/30196657 DC : 0 BS EN 61881-2 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
IEC 62128-2:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by d.c. traction systems
12/30247714 DC BS IEC 62128-2. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 2. Provisions against the effects of stray currents caused by d.c. traction systems
15/30329543 DC : 0 BS EN 50463-1 - RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
00/243316 DC : DRAFT JUL 2000 IEC 60494-1 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 1: PANTOGRAPHS FOR MAIN LINE VEHICLES
BS EN 61377:1997 Electric traction. Rolling stock. Combined testing of inverter-fed alternating current motors and their control
00/243317 DC : DRAFT JUL 2000
05/30133277 DC : DRAFT MAY 2005
EN 50123-7-2:2003 Railway applications - Fixed installations - D.C. switchgear - Part 7-2: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating current transducers and other current measuring devices
IEC 62928:2017 Railway applications - Rolling stock - Onboard lithium-ion traction batteries
IEC 62695:2014 Railway applications - Fixed installations - Traction transformers
IEC 61992-7-3:2006 Railway applications - Fixed installations - DC switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices
BS EN 62621 : 2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS (IEC 62621:2011)
I.S. EN 50123-4:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
UNE-EN 62520:2012 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
EN 50463-1:2017 Railway applications - Energy measurement on board trains - Part 1: General
I.S. EN 60310:2016 RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK
I.S. EN 60077-5:2003 RAILWAY APPLICATIONS - ELECTROTECHNICAL EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES
IEC 62505-2:2016 Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 2: Disconnectors, earthing switches and switches with nominal voltage above 1 kV
CEI EN 60349-1 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
CEI EN 61881-2 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
EN IEC 62928:2018 Railway applications - Rolling stock - Onboard lithium-ion traction batteries
CLC/TR 50488:2006 Railway applications - Safety measures for the personnel working on or near overhead contact lines
IEC 62590:2010 Railway applications - Fixed installations - Electronic power converters for substations
I.S. EN 50123-7-2:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-2: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING CURRENT TRANSDUCERS AND OTHER CURRENT MEASURING DEVICES
IEC 62313:2009 Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock
IEC 60077-1 REDLINE : 2ED 2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
I.S. EN 61377-3:2003 RAILWAY APPLICATIONS - ROLLING STOCK - PART 3: COMBINED TESTING OF ALTERNATING CURRENT MOTORS, FED BY AN INDIRECT CONVERTOR, AND THEIR CONTROL SYSTEM
IEC 61992-3:2006+AMD1:2015 CSV Railway applications - Fixed installations - DC switchgear - Part 3:Indoor d.c. disconnectors, switch-disconnectors and earthing switches
IEC 60349-2:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
I.S. EN 50155:2017-11 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
UNE-EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
13/30264553 DC : 0 BS EN 61287-1 ED 3.0 - RAILWAY APPLICATIONS - POWER CONVERTORS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS
09/30182105 DC : 0 BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
BS EN 60349-2:2010 Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors
BS EN 62520:2011 Railway applications. Electric traction. Short-primary type linear induction motors (LIM) fed by power converters
I.S. EN 60349-1:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
BS EN 50123-7-1:2003 Railway applications. Fixed installations. d.c. switchgear. Measurement, control and protection devices for specific use in d.c. traction systems Measurement, control and protection devices for specific use in d.c. traction systems. Application guide
10/30235844 DC : 0 BS EN 61881-2 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
BS EN 60077-5:2003 Railway applications. Electrotechnical equipment for rolling stock Electrotechnical components. Rules for HV fuses
DIN V ENV 60349-2 : 1994 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
BS EN 61881-2:2012 Railway applications. Rolling stock equipment. Capacitors for power electronics Aluminium electrolytic capacitors with non solid electrolyte
14/30271248 DC : 0 BS EN 60310 ED 4.0 - RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK
13/30252783 DC : 0 BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
IEC 60571:2012 Railway applications - Electronic equipment used on rolling stock
14/30288062 DC : 0 BS EN 61377 ED. 2.0 - RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS
CEI EN 50123-1 : 2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 1: GENERAL
CEI EN 60077-4 : 2003 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS
EN 50463-2:2017 Railway applications - Energy measurement on board trains - Part 2: Energy measuring
PREN 50463-1 : DRAFT 2015 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
I.S. EN 60349-4:2013 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV))
I.S. EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
IEC 62128-1:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
CEI EN 60349-2 : 2012 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
IEC 62505-3-1:2009 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-1: Measurement, control and protection devices for specific use in a.c. tractions systems - Application guide
BS 173-1:1992 Electric traction (rail and road vehicles) Specification for rotating electrical machines
NF EN 61377-2 : 2003 RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TESTING - PART 2: CHOPPER-FED DIRECT CURRENT TRACTION MOTORS AND THEIR CONTROL
EN 62924:2017 Railway applications - Fixed installations - Stationary energy storage system for DC traction systems
I.S. EN 60077-1:2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
I.S. EN 50502:2015 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS
IEC 62589:2010 Railway applications - Fixed installations - Harmonisation of the rated values for converter groups and tests on converter groups
BS EN 61377-2:2002 Railway applications. Rolling stock Combined testing. Chopper-fed direct current traction motors and their control
IEC 60571-1:1990 Electronic equipment used on rail vehicles. Part 1: General requirements and tests for electronic equipment
IEC 61992-1:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 1:General
IEC 61992-4:2006+AMD1:2015 CSV Railway applications - Fixed installations - DC switchgear - Part 4:Outdoor d.c. disconnectors, switch-disconnectors and earthing switches
IEC 60077-3:2001 Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers
IEC 60077-2:2017 Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
IEC 62724:2013 Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines
UNE-EN 60349-2:2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 2: Electronic converter-fed alternating current motors
IEC 61881-3:2012+AMD1:2013 CSV Railway applications - Rolling stock equipment - Capacitors forpower electronics - Part 3: Electric double-layer capacitors
EN 50155:2017 Railway applications - Rolling stock - Electronic equipment
EN 60077-4:2003 Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
I.S. EN 50463-2:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
IEC 61992-2:2006+AMD1:2014 CSV Railway applications - Fixed installations - DC switchgear - Part 2:DC circuit-breakers
I.S. EN 61377:2016 RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TEST METHOD FOR TRACTION SYSTEMS
I.S. EN 62520:2011 RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS (LIM) FED BY POWER CONVERTERS
IEC 60077-5:2003 Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
11/30247723 DC : 0 BS IEC 60571 - RAILWAY APPLICATIONS - ELECTRONIC EQUIPMENT USED ON ROLLING STOCK
BS EN 50123-2:2003 Railway applications. Fixed installations. D.C. switchgear D.C. circuit breakers
03/306438 DC : DRAFT APR 2003 IEC 61133 ED. 2 - RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
18/30363296 DC : 0 BS EN 60077-4 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS
CEI CLC/TR 50488 : 2007 RAILWAY APPLICATIONS - SAFETY MEASURES FOR PERSONNEL WORKING NEAR OVERHEAD CONTACT LINES
BS EN 61377-1:2006 Railway applications. Rolling stock Combined testing of inverter-fed alternating current motors and their control system
UNE-EN 50502:2016 Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
PREN 50502 : DRAFT 2013 RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS
16/30296085 DC : 0 BS EN 60077-2 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
IEC 60494-1:2013 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 1: Pantographs for main line vehicles
BS EN 60310:2016 Railway applications. Traction transformers and inductors on board rolling stock
IEC 62505-3-3:2009 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-3: Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase inductive voltage transformers
I.S. EN 62864-1:2016 RAILWAY APPLICATIONS - ROLLING STOCK - POWER SUPPLY WITH ONBOARD ENERGY STORAGE SYSTEM - PART 1: SERIES HYBRID SYSTEM
IEC 60494-2:2013 Railway applications - Rolling stock - Pantographs - Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles
UNE-EN 62924:2017 Railway applications - Fixed installations - Stationary energy storage system for DC traction systems
CEI EN 62924 : 1ED 2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - STATIONARY ENERGY STORAGE SYSTEM FOR DC TRACTION SYSTEMS
I.S. EN 61881-3:2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012 (EQV))
I.S. EN 50123-2:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - D.C. CIRCUIT BREAKERS
UNE-EN 62864-1:2017 Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system
IEC 62888-1:2018 Railway applications - Energy measurement on board trains - Part 1: General
IEC 62848-1:2016 Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
IEC 62505-1:2016 Railway applications - Fixed installations - Particular requirements for AC switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV
I.S. EN 50123-7-3:2003 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 7-3: MEASUREMENT, CONTROL AND PROTECTION DEVICES FOR SPECIFIC USE IN D.C. TRACTION SYSTEMS - ISOLATING VOLTAGE TRANSDUCERS AND OTHER VOLTAGE MEASURING DEVICES
IEC 62505-3-2:2009 Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3-2: Measurement, control and protection devices for specific use in a.c. traction systems - Single-phase current transformers
IEC 60913:2013 Railway applications - Fixed installations - Electric traction overhead contact lines
I.S. EN 60077-3:2002 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 3: ELECTROTECHNICAL COMPONENTS - RULES FOR D.C. CIRCUIT-BREAKERS
IEC 62621:2011 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
IEC 61377:2016 Railway applications - Rolling stock - Combined test method for traction systems
16/30296081 DC : 0 BS EN 60077-1 ED. 2.0 - RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 1: GENERAL SERVICE CONDITIONS AND GENERAL RULES
UNE-EN 62621:2016 Railway applications - Fixed installations - Electric traction - Specific requirements for composite insulators used for overhead contact line systems
IEC 61881-2:2012 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic capacitors with non-solid electrolyte
IEC 61377-2:2002 Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control
IEC 61377-1:2006 Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system
IEC 61377-3:2002 Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
IEC 60077-4:2003 Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
IEC 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
IEC 60349-4:2012 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
IEC 60310:2016 Railway applications - Traction transformers and inductors on board rolling stock
IEC 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
BS EN 60077-1:2017 Railway applications. Electric equipment for rolling stock General service conditions and general rules
UNE-EN 60349-1:2011 Electric traction - Rotating electrical machines for rail and road vehicles -- Part 1: Machines other than electronic converter-fed alternating current motors
EN 50123-7-3:2003 Railway applications - Fixed installations - D.C. switchgear - Part 7-3: Measurement, control and protection devices for specific use in d.c. traction systems - Isolating voltage transducers and other voltage measuring devices
11/30230291 DC : 0 BS IEC 60494-2 - RAILWAY APPLICATIONS - ROLLING STOCK - PANTOGRAPHS - CHARACTERISTICS AND TESTS - PART 2: PANTOGRAPHS FOR METROS AND LIGHT RAIL VEHICLES
BS EN 61377-3:2002 Railway applications. Rolling stock Combined testing of alternating current motors, fed by an indirect convertor, and their control system
IEC 60349:1991 Electric traction. Rotating electrical machines for rail and road vehicles
CEI EN 60077-5 : 2004 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 5: ELECTROTECHNICAL COMPONENTS - RULES FOR HV FUSES
12/30247717 DC : 0 IEC 62128-3 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 3: MUTUAL INTERACTION OF AC AND DC TRACTION SYSTEMS
09/30166871 DC : 0 BS EN 62520 - RAILWAY APPLICATIONS - ELECTRIC TRACTION - SHORT-PRIMARY TYPE LINEAR INDUCTION MOTORS FED BY POWER CONVERTERS
03/306439 DC : DRAFT APR 2003 IEC 61377-1 ED. 1 - ELECTRIC TRACTION - ROLLING STOCK - COMBINED TESTING - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL
I.S. EN 50463-1:2017 RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 1: GENERAL
I.S. EN 61287-1:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS
CEI EN 60310 : 2016 RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK
11/30206274 DC : 0 BS EN 60349-4 - ELECTRIC TRACTION ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
09/30182101 DC : 0 BS EN 60349-1 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
S.R. CLC/TR 50488:2007 RAILWAY APPLICATIONS - SAFETY MEASURES FOR THE PERSONNEL WORKING ON OR NEAR OVERHEAD CONTACT LINES
BS EN 60077-3:2002 Railway applications. Electric equipment for rolling stock Electrotechnical components. Rules for d.c. circuit-breakers
NF EN 61377-1 : 2006 RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL
IEEE 1887-2017 IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications
I.S. EN 61377-1:2007 RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM
I.S. EN 62924:2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - STATIONARY ENERGY STORAGE SYSTEM FOR DC TRACTION SYSTEMS
I.S. EN 61881-2:2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012 (EQV))
I.S. EN IEC 62928:2018 RAILWAY APPLICATIONS - ROLLING STOCK - ONBOARD LITHIUM-ION TRACTION BATTERIES
IEEE DRAFT 1476 : D4.1 NOV 99 DRAFT STANDARD FOR PASSENGER TRAIN AUXILIARY POWER SYSTEMS INTERFACES
S.R. CLC/TS 50238-2:2015 RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 2: COMPATIBILITY WITH TRACK CIRCUITS
NF EN 61377-3 : 2003 RAILWAY APPLICATIONS - ROLLING STOCK - PART 3: COMBINED TESTING OF ALTERNATING CURRENT MOTORS, FED BY AN INDIRECT CONVERTOR, AND THEIR CONTROL SYSTEM
I.S. EN 60077-4:2003 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 4: ELECTROTECHNICAL COMPONENTS - RULES FOR AC CIRCUIT-BREAKERS
IEC 62924:2017 Railway applications - Fixed installations - Stationary energy storage system for DC traction systems
IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
I.S. EN 60077-2:2017 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - PART 2: ELECTROTECHNICAL COMPONENTS - GENERAL RULES
IEC 62888-2:2018 Railway applications - Energy measurement on board trains - Part 2: Energy measurement
IEC 62498-1:2010 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
IEC 61133 REDLINE : 3ED 2016 RAILWAY APPLICATIONS - ROLLING STOCK - TESTING OF ROLLING STOCK ON COMPLETION OF CONSTRUCTION AND BEFORE ENTRY INTO SERVICE
I.S. EN 61377-2:2002 RAILWAY APPLICATIONS - ROLLING STOCK - COMBINED TESTING - PART 2: CHOPPER-FED DIRECT CURRENT TRACTION MOTORS AND THEIR CONTROL
IEC 62847:2016 Railway applications - Rolling stock - Electrical connectors - Requirements and test methods
CLC/TS 50238-2 : 2015 COR 2016 RAILWAY APPLICATIONS - COMPATIBILITY BETWEEN ROLLING STOCK AND TRAIN DETECTION SYSTEMS - PART 2: COMPATIBILITY WITH TRACK CIRCUITS
12/30251569 DC BS IEC 62128-1. Railway applications. Fixed installations. Electrical safety, earthing and the return circuit. Part 1. Protective provisions against electric shock
IEC 62864-1:2016 Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system
EN 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
EN 50123-7-1:2003 Railway applications - Fixed installations - D.C. switchgear - Part 7-1: Measurement, control and protection devices for specific use in d.c. traction systems - Application guide
EN 60349-4:2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
EN 61377-1:2006/corrigendum:2006 RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM
EN 50123-4:2003/A1:2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 4: OUTDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES
EN 50123-2:2003 Railway applications - Fixed installations - D.C. switchgear - Part 2: D.C. circuit breakers
EN 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
IEC 60077-2:2017 RLV Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules
IEC 60077-1:2017 RLV Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
EN 62864-1:2016 Railway applications - Rolling stock - Power supply with onboard energy storage system - Part 1: Series hybrid system
EN 61881-3:2012/A1:2013 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012/A1:2013)
EN 61377:2016 Railway applications - Rolling stock - Combined test method for traction Systems
EN 61377-2:2002 Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control
EN 61377-3:2002 Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
EN 60310:2016/AC:2018-03 RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK (IEC 60310:2016/COR1:2018)
EN 62621:2016/A1:2016 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION - SPECIFIC REQUIREMENTS FOR COMPOSITE INSULATORS USED FOR OVERHEAD CONTACT LINE SYSTEMS
EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
EN 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
EN 50123-3:2003/A1:2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SWITCHGEAR - PART 3: INDOOR D.C. DISCONNECTORS, SWITCH-DISCONNECTORS AND EARTHING SWITCHES

EN 50160 : 2010 AMD 1 2015 VOLTAGE CHARACTERISTICS OF ELECTRICITY SUPPLIED BY PUBLIC ELECTRICITY NETWORKS
IEC 60038:2009 IEC standard voltages
EN 50124-2:2017 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
IEC 62128-1:2013 Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 1: Protective provisions against electric shock
IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
IEC 61133:2016 Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service
IEEE 16-2004 IEEE Standard for Electrical and Electronic Control Apparatus on Rail Vehicles
IEC 60913:2013 Railway applications - Fixed installations - Electric traction overhead contact lines
EN 50124-1:2017 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
IEC 62497-2:2010 Railway applications - Insulation coordination - Part 2: Overvoltages and related protection
EN 50163 : 2004 COR 2013 RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS
EN 50388 : 2012 COR 2013 RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY
IEC 62313:2009 Railway applications - Power supply and rolling stock - Technical criteria for the coordination between power supply (substation) and rolling stock
UIC 550-2 : 1ED 1994 POWER SUPPLY SYSTEMS FOR PASSENGER COACHES - TYPE TESTING
UIC 550 : 11ED 2005 POWER SUPPLY INSTALLATIONS FOR PASSENGER STOCK

View more information
US$133.00
Excluding Tax where applicable

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.